Change in coreboot[master]: mb/google/guybrush: Add SoC thermal zone

[Tim Wawrzynczak (Code Review)]

Attention is currently required from: Raul Rangel, Furquan Shaikh, Martin Roth, Rob Barnes.
Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/54134 )

Change subject: mb/google/guybrush: Add SoC thermal zone
......................................................................

Patch Set 1:

(1 comment)

File src/mainboard/google/guybrush/variants/baseboard/devicetree.cb:

https://review.coreboot.org/c/coreboot/+/54134/comment/d0a0d625_c7d9ebb3 
PS1, Line 55: chip drivers/acpi/thermal_zone
            : 		register "name" = ""SOC""
            : 
            : 		register "temperature_sensor_id" = "0"
            : 
            : 		register "polling_period" = "10000"
            : 
            : 		# EC is configured to power off the system at 92C, so add one degree of buffer
            : 		# so the OS can gracefully shutdown
            : 		register "critical_temperature" = "91"
            : 
            : 		# EC is configured to assert PROCHOT at 90C. That drastically lowers
            : 		# performance. Instead we will tell the OS to start throttling the CPUs at
            : 		# 85C in hopes that we don't hit the PROCHOT limit.
            : 		register "passive_config" = "{
            : 			.temperature = 85,
            : 			.time_constant_1 = 2,
            : 			.time_constant_2 = 5,
            : 			.time_sampling_period = 2000,
            : 		}"
            : 
            : 		device generic 0 on end
            : 	end
If you add this chip/device underneath the EC, you might find it simpler to implement the chromeec callback for get_temperature because you will get a reference to the EC's `struct device`, and you can use acpi_device_path()