[S] Change in coreboot[main]: mb/starlabs/starlite_adl: Disconnect unused GPIOs

[Sean Rhodes (Code Review)]

Sean Rhodes has submitted this change. ( https://review.coreboot.org/c/coreboot/+/86065?usp=email )

(

1 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: mb/starlabs/starlite_adl: Disconnect unused GPIOs
......................................................................

mb/starlabs/starlite_adl: Disconnect unused GPIOs

These GPIO's are not used, so disconnect them.

Change-Id: I68e0c8c840c811de733775e7a6f79d9d9e91bb8c
Signed-off-by: Sean Rhodes 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86065
Reviewed-by: Matt DeVillier 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
1 file changed, 8 insertions(+), 8 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Matt DeVillier: Looks good to me, approved

diff --git a/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c b/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
index f57f122..dac6896 100644
--- a/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
+++ b/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
@@ -27,11 +27,11 @@
    /* GPD3:	Power Button					*/
    PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1),
    /* GPD4:	Sleep S3					*/
-	PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
+	PAD_NC(GPD4, NONE),
    /* GPD5:	Sleep S4					*/
-	PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
+	PAD_NC(GPD5, NONE),
    /* GPD6:	Sleep A						*/
-	PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
+	PAD_NC(GPD6, NONE),
    /* GPD7:	Power Adapter Disable				*/
    PAD_CFG_GPO(GPD7, 0, PWROK),
    /* GPD8:	Suspend Clock					*/
@@ -39,9 +39,9 @@
    /* GPD9:	Wireless LAN Sleep				*/
    PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
    /* GPD10:	Sleep S5					*/
-	PAD_CFG_NF(GPD10, NONE, DEEP, NF1),
+	PAD_NC(GPD10, NONE),
    /* GPD11:	LAN PHY Enable					*/
-	PAD_CFG_GPO(GPD11, 0, PWROK),
+	PAD_NC(GPD11, NONE),

/* A0:		ESPI IO 0					*/
    /* A1:		ESPI IO 1					*/
@@ -69,7 +69,7 @@
    /* A15:		Camera Reset					*/
    PAD_NC(GPP_A15, NONE),
    /* A16:		USB OverCurrent 3				*/
-	PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
+	PAD_NC(GPP_A16, NONE),
    /* A17:		Not Connected					*/
    PAD_NC(GPP_A17, NONE),
    /* A18:		DDI B DP HPD					*/
@@ -111,7 +111,7 @@
    /* B11:		I2C PMC PD Interrupt	Test Point 28		*/
    PAD_NC(GPP_B11, NONE),
    /* B12:		PM SLP S0					*/
-	PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
+	PAD_NC(GPP_B12, NONE),
    /* B13:		PLT RST						*/
    PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
    /* B14:		Webcam Privacy LED				*/
@@ -256,7 +256,7 @@
    /* E8:		DRAM Sleep					*/
    PAD_NC(GPP_E8, NONE),
    /* E9:		USB OverCurrent 0				*/
-	PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
+	PAD_NC(GPP_E9, NONE),
    /* E10:		PWD Amplifier Input				*/
    PAD_NC(GPP_E10, NONE),
    /* E11:		TPM IRQ						*/