[XL] Change in coreboot[main]: skl mainboards/dt: Move usb{2,3}_ports settings into XHCI device scope
Felix Singer has submitted this change. ( https://review.coreboot.org/c/coreboot/+/83171?usp=email )
Change subject: skl mainboards/dt: Move usb{2,3}_ports settings into XHCI device scope ......................................................................
skl mainboards/dt: Move usb{2,3}_ports settings into XHCI device scope
Change-Id: I22ba991a9d559b0ecc7b3ceddcfd099890dd6c3a Signed-off-by: Felix Singer felixsinger@posteo.net Reviewed-on: https://review.coreboot.org/c/coreboot/+/83171 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Eric Lai ericllai@google.com Reviewed-by: Marvin Evers marvin.n.evers@gmail.com Reviewed-by: Erik van den Bogaert ebogaert@eltan.com Reviewed-by: Michael Niewöhner foss@mniewoehner.de Reviewed-by: Jonathon Hall jonathon.hall@puri.sm --- M src/mainboard/51nb/x210/devicetree.cb M src/mainboard/facebook/monolith/devicetree.cb M src/mainboard/google/eve/devicetree.cb M src/mainboard/google/fizz/variants/baseboard/devicetree.cb M src/mainboard/google/fizz/variants/endeavour/overridetree.cb M src/mainboard/google/fizz/variants/karma/overridetree.cb M src/mainboard/google/glados/variants/asuka/overridetree.cb M src/mainboard/google/glados/variants/caroline/overridetree.cb M src/mainboard/google/glados/variants/cave/overridetree.cb M src/mainboard/google/glados/variants/chell/overridetree.cb M src/mainboard/google/glados/variants/glados/overridetree.cb M src/mainboard/google/glados/variants/lars/overridetree.cb M src/mainboard/google/glados/variants/sentry/overridetree.cb M src/mainboard/google/poppy/variants/atlas/devicetree.cb M src/mainboard/google/poppy/variants/baseboard/devicetree.cb M src/mainboard/google/poppy/variants/nami/devicetree.cb M src/mainboard/google/poppy/variants/nautilus/devicetree.cb M src/mainboard/google/poppy/variants/nocturne/devicetree.cb M src/mainboard/google/poppy/variants/rammus/devicetree.cb M src/mainboard/google/poppy/variants/soraka/devicetree.cb M src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb M src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb M src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb M src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb M src/mainboard/intel/kunimitsu/devicetree.cb M src/mainboard/intel/saddlebrook/devicetree.cb M src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb M src/mainboard/libretrend/lt1000/devicetree.cb M src/mainboard/protectli/vault_kbl/devicetree.cb M src/mainboard/purism/librem_skl/variants/librem13/overridetree.cb M src/mainboard/purism/librem_skl/variants/librem15/overridetree.cb M src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb M src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb M src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb M src/mainboard/supermicro/x11-lga1151-series/variants/x11ssw-f/overridetree.cb 35 files changed, 672 insertions(+), 564 deletions(-)
Approvals: Jonathon Hall: Looks good to me, but someone else must approve Eric Lai: Looks good to me, approved Erik van den Bogaert: Looks good to me, but someone else must approve Marvin Evers: Looks good to me, but someone else must approve build bot (Jenkins): Verified Michael Niewöhner: Looks good to me, but someone else must approve
diff --git a/src/mainboard/51nb/x210/devicetree.cb b/src/mainboard/51nb/x210/devicetree.cb index 17a5f75..51cb89a 100644 --- a/src/mainboard/51nb/x210/devicetree.cb +++ b/src/mainboard/51nb/x210/devicetree.cb @@ -75,18 +75,6 @@ register "PcieRpAdvancedErrorReporting[8]" = "1" register "PcieRpLtrEnable[8]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_MID(OC1)" # Type-A Port (left) - register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (left) - register "usb2_ports[2]" = "USB2_PORT_FLEX(OC_SKIP)" # FPR - register "usb2_ports[3]" = "USB2_PORT_FLEX(OC_SKIP)" # SD - register "usb2_ports[4]" = "USB2_PORT_FLEX(OC_SKIP)" # INT - register "usb2_ports[5]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Webcam - register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # mPCIe / WiFi Port - register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # mSATA / WWAN Port - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (left) - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (left)
# PL1 override 25W # PL2 override 44W @@ -101,7 +89,24 @@ device domain 0 on device ref igpu on end device ref sa_thermal on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC1), // Type-A Port (left) + [1] = USB2_PORT_MID(OC1), // Type-A Port (left) + [2] = USB2_PORT_FLEX(OC_SKIP), // FPR + [3] = USB2_PORT_FLEX(OC_SKIP), // SD + [4] = USB2_PORT_FLEX(OC_SKIP), // INT + [5] = USB2_PORT_MID(OC1), // Type-A Port (right) + [6] = USB2_PORT_FLEX(OC_SKIP), // Webcam + [7] = USB2_PORT_MID(OC_SKIP), // mPCIe / WiFi Port + [8] = USB2_PORT_MID(OC_SKIP), // mSATA / WWAN Port + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC1), // Type-A Port (left) + [1] = USB3_PORT_DEFAULT(OC1), // Type-A Port (left) + }" + end device ref thermal on end device ref heci1 on end device ref sata on end diff --git a/src/mainboard/facebook/monolith/devicetree.cb b/src/mainboard/facebook/monolith/devicetree.cb index 4bc61dd..609e181 100644 --- a/src/mainboard/facebook/monolith/devicetree.cb +++ b/src/mainboard/facebook/monolith/devicetree.cb @@ -174,21 +174,6 @@ # Disable Aspm register "pcie_rp_aspm[8]" = "AspmDisabled"
- register "usb2_ports" = "{ - [0] = USB2_PORT_TYPE_C(OC_SKIP), /* USB-C Port 2 */ - [1] = USB2_PORT_MID(OC1), /* USB3_TYPE-A Port 1 */ - [2] = USB2_PORT_MID(OC1), /* USB3_TYPE-A Port 2 */ - [3] = USB2_PORT_TYPE_C(OC_SKIP), /* USB-C Port 1 */ - [4] = USB2_PORT_SHORT(OC_SKIP), /* M2 Port */ - [6] = USB2_PORT_SHORT(OC_SKIP), /* Audio board */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-C Port 2 */ - [1] = USB3_PORT_DEFAULT(OC_SKIP), /* USB3_TYPE-A Port 1 */ - [2] = USB3_PORT_DEFAULT(OC_SKIP), /* USB3_TYPE-A Port 2 */ - [3] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-C Port 1 */ - }"
# Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ @@ -209,7 +194,23 @@ device ref igpu on end device ref sa_thermal on end device ref gmm on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC_SKIP), /* USB-C Port 2 */ + [1] = USB2_PORT_MID(OC1), /* USB3_TYPE-A Port 1 */ + [2] = USB2_PORT_MID(OC1), /* USB3_TYPE-A Port 2 */ + [3] = USB2_PORT_TYPE_C(OC_SKIP), /* USB-C Port 1 */ + [4] = USB2_PORT_SHORT(OC_SKIP), /* M2 Port */ + [6] = USB2_PORT_SHORT(OC_SKIP), /* Audio board */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-C Port 2 */ + [1] = USB3_PORT_DEFAULT(OC_SKIP), /* USB3_TYPE-A Port 1 */ + [2] = USB3_PORT_DEFAULT(OC_SKIP), /* USB3_TYPE-A Port 2 */ + [3] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-C Port 1 */ + }" + end device ref south_xdci on end device ref thermal on end device ref heci1 on end diff --git a/src/mainboard/google/eve/devicetree.cb b/src/mainboard/google/eve/devicetree.cb index a2b4311..e6a4178 100644 --- a/src/mainboard/google/eve/devicetree.cb +++ b/src/mainboard/google/eve/devicetree.cb @@ -141,15 +141,6 @@ #RP 5 uses CLK SRC 4 register "PcieRpClkSrcNumber[4]" = "4"
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # H1 - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -229,6 +220,18 @@ device ref igpu on end device ref sa_thermal on end device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC0), // Type-C Port 1 + [1] = USB2_PORT_FLEX(OC_SKIP), // Camera + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_LONG(OC1), // Type-C Port 2 + [6] = USB2_PORT_MID(OC_SKIP), // H1 + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 2 + }" chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" diff --git a/src/mainboard/google/fizz/variants/baseboard/devicetree.cb b/src/mainboard/google/fizz/variants/baseboard/devicetree.cb index d64a9f9..a6ec6b6 100644 --- a/src/mainboard/google/fizz/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/fizz/variants/baseboard/devicetree.cb @@ -233,22 +233,6 @@ # RP 12 uses CLK SRC 2 register "PcieRpClkSrcNumber[11]" = "2"
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C - register "usb2_ports[1]" = "USB2_PORT_MID(OC3)" # Type-A Rear - register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Front - register "usb2_ports[3]" = "USB2_PORT_MID(OC2)" # Type-A Front - register "usb2_ports[4]" = "USB2_PORT_MID(OC1)" # Type-A Rear - register "usb2_ports[5]" = "USB2_PORT_MID(OC1)" # Type-A Rear - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Type-A 2.0 / Debug - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Rear - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Front - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Front - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Rear - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Rear - register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" # HDMI CEC register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # TPM register "i2c_voltage[2]" = "I2C_VOLTAGE_3V3" # Debug @@ -306,6 +290,25 @@ device ref igpu on end device ref sa_thermal on end device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC0), // Type-C + [1] = USB2_PORT_MID(OC3), // Type-A Rear + [2] = USB2_PORT_MID(OC2), // Type-A Front + [3] = USB2_PORT_MID(OC2), // Type-A Front + [4] = USB2_PORT_MID(OC1), // Type-A Rear + [5] = USB2_PORT_MID(OC1), // Type-A Rear + [6] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [7] = USB2_PORT_MID(OC_SKIP), // Type-A 2.0 / Debug + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C + [1] = USB3_PORT_DEFAULT(OC3), // Type-A Rear + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Front + [3] = USB3_PORT_DEFAULT(OC2), // Type-A Front + [4] = USB3_PORT_DEFAULT(OC1), // Type-A Rear + [5] = USB3_PORT_DEFAULT(OC1), // Type-A Rear + }" chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" diff --git a/src/mainboard/google/fizz/variants/endeavour/overridetree.cb b/src/mainboard/google/fizz/variants/endeavour/overridetree.cb index 989b2406..3da4f0e 100644 --- a/src/mainboard/google/fizz/variants/endeavour/overridetree.cb +++ b/src/mainboard/google/fizz/variants/endeavour/overridetree.cb @@ -42,20 +42,6 @@ register "PcieRpEnable[10]" = "0" register "PcieRpEnable[11]" = "0"
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC_SKIP)" # Type-C - register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # HDMI - register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Rear - register "usb2_ports[3]" = "USB2_PORT_MID(OC2)" # Type-A Rear - register "usb2_ports[4]" = "USB2_PORT_MID(OC3)" # Type-A Rear - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # HDMI Audio - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # HDMI - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Rear - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Rear - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Rear - register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" # TPU register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # TPM register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" # None @@ -78,6 +64,23 @@
device domain 0 on device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC_SKIP), // Type-C + [1] = USB2_PORT_MID(OC_SKIP), // HDMI + [2] = USB2_PORT_MID(OC2), // Type-A Rear + [3] = USB2_PORT_MID(OC2), // Type-A Rear + [4] = USB2_PORT_MID(OC3), // Type-A Rear + [5] = USB2_PORT_MID(OC_SKIP), // HDMI Audio + [6] = USB2_PORT_MID(OC_SKIP), // Bluetooth + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C + [1] = USB3_PORT_DEFAULT(OC_SKIP), // HDMI + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Rear + [3] = USB3_PORT_DEFAULT(OC2), // Type-A Rear + [4] = USB3_PORT_DEFAULT(OC3), // Type-A Rear + }" chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi diff --git a/src/mainboard/google/fizz/variants/karma/overridetree.cb b/src/mainboard/google/fizz/variants/karma/overridetree.cb index d1dc46f..25b39f4 100644 --- a/src/mainboard/google/fizz/variants/karma/overridetree.cb +++ b/src/mainboard/google/fizz/variants/karma/overridetree.cb @@ -1,28 +1,32 @@ chip soc/intel/skylake
- # Mapping of USB port # to device - #+----------------+-------+-----------------------------------+ - #| Device | Port# | Rev | - #+----------------+-------+-----------------------------------+ - #| USB A Side | 3 | 2/3 | - #| SD Card | 4 | | - #| Camera | 8 | | - #| Touchsreen | 10 | | - #+----------------+-------+-----------------------------------+ - register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Side - register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Card reader - register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Camera - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Touchscreen - - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Side - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card reader - register "power_limits_config" = "{ .psys_pmax = 151, }"
device domain 0 on device ref south_xhci on + # Mapping of USB port # to device + #+----------------+-------+-----------------------------------+ + #| Device | Port# | Rev | + #+----------------+-------+-----------------------------------+ + #| USB A Side | 3 | 2/3 | + #| SD Card | 4 | | + #| Camera | 8 | | + #| Touchsreen | 10 | | + #+----------------+-------+-----------------------------------+ + register "usb2_ports" = "{ + [2] = USB2_PORT_MID(OC2), // Type-A Side + [3] = USB2_PORT_MID(OC_SKIP), // Card reader + [7] = USB2_PORT_MID(OC_SKIP), // Camera + [9] = USB2_PORT_MID(OC_SKIP), // Touchscreen + }" + + register "usb3_ports" = "{ + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Side + [3] = USB3_PORT_DEFAULT(OC_SKIP), // Card reader + }" + chip drivers/usb/acpi device usb 0.0 on chip drivers/usb/acpi diff --git a/src/mainboard/google/glados/variants/asuka/overridetree.cb b/src/mainboard/google/glados/variants/asuka/overridetree.cb index 61220ee..85b0155 100644 --- a/src/mainboard/google/glados/variants/asuka/overridetree.cb +++ b/src/mainboard/google/glados/variants/asuka/overridetree.cb @@ -1,19 +1,24 @@ chip soc/intel/skylake
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Card Reader - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (board) - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # PIC MCU - register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card Reader - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (board) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC0), // Type-C Port 1 + [1] = USB2_PORT_MID(OC2), // Card Reader + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_MID(OC2), // Type-A Port (board) + [6] = USB2_PORT_FLEX(OC_SKIP), // Camera + [7] = USB2_PORT_MID(OC_SKIP), // PIC MCU + [8] = USB2_PORT_LONG(OC3), // Type-A Port (board) + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC_SKIP), // Card Reader + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Port (board) + [3] = USB3_PORT_DEFAULT(OC3), // Type-A Port (board) + }" + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""ELAN0001"" diff --git a/src/mainboard/google/glados/variants/caroline/overridetree.cb b/src/mainboard/google/glados/variants/caroline/overridetree.cb index 6ea4845..fd6ded4 100644 --- a/src/mainboard/google/glados/variants/caroline/overridetree.cb +++ b/src/mainboard/google/glados/variants/caroline/overridetree.cb @@ -9,14 +9,6 @@ register "SlowSlewRateForGt" = "3" # Fast/16 register "SlowSlewRateForSa" = "0" # Fast/2
- register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main) - register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main) - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub) - register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, // touchpad [PchSerialIoIndexI2C1] = PchSerialIoPci, // touchscreen @@ -38,6 +30,19 @@ register "tcc_offset" = "10"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC_SKIP), // Type-C Port (main) + [1] = USB2_PORT_MAX(OC_SKIP), // Type-C Port (sub) + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [6] = USB2_PORT_FLEX(OC_SKIP), // Camera + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port (main) + [1] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port (sub) + }" + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""ATML0001"" diff --git a/src/mainboard/google/glados/variants/cave/overridetree.cb b/src/mainboard/google/glados/variants/cave/overridetree.cb index 7d78d6b..0aeb317 100644 --- a/src/mainboard/google/glados/variants/cave/overridetree.cb +++ b/src/mainboard/google/glados/variants/cave/overridetree.cb @@ -3,14 +3,6 @@ register "PmConfigSlpS4MinAssert" = "1" # 1s register "PmConfigSlpSusMinAssert" = "1" # 500ms
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board) - register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board) - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex) - # PL2 override 15W register "power_limits_config" = "{ .tdp_pl2_override = 15, @@ -26,6 +18,19 @@ register "sdcard_cd_gpio" = "GPP_A7"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC_SKIP), // Type-C Port (board) + [1] = USB2_PORT_MAX(OC_SKIP), // Type-C Port (flex) + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [6] = USB2_PORT_FLEX(OC_SKIP), // Camera + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port (board) + [1] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port (flex) + }" + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""ELAN0001"" diff --git a/src/mainboard/google/glados/variants/chell/overridetree.cb b/src/mainboard/google/glados/variants/chell/overridetree.cb index 9e4b7f0..8ab7c35 100644 --- a/src/mainboard/google/glados/variants/chell/overridetree.cb +++ b/src/mainboard/google/glados/variants/chell/overridetree.cb @@ -3,18 +3,6 @@ register "PmConfigSlpS4MinAssert" = "1" # 1s register "PmConfigSlpSusMinAssert" = "1" # 500ms
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD - # PL2 override 15W register "power_limits_config" = "{ .tdp_pl2_override = 15, @@ -27,6 +15,23 @@ register "tcc_offset" = "10"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC2), // Type-C Port 1 + [1] = USB2_PORT_LONG(OC3), // Type-C Port 2 + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_MID(OC0), // Type-A Port + [6] = USB2_PORT_FLEX(OC_SKIP), // Camera + [8] = USB2_PORT_MID(OC_SKIP), // SD + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC2), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC3), // Type-C Port 2 + [2] = USB3_PORT_DEFAULT(OC0), // Type-A Port + [3] = USB3_PORT_DEFAULT(OC_SKIP), // SD + }" + end device ref i2c1 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" diff --git a/src/mainboard/google/glados/variants/glados/overridetree.cb b/src/mainboard/google/glados/variants/glados/overridetree.cb index 3bd4e3a..b2d8fc0 100644 --- a/src/mainboard/google/glados/variants/glados/overridetree.cb +++ b/src/mainboard/google/glados/variants/glados/overridetree.cb @@ -3,18 +3,6 @@ register "PmConfigSlpS4MinAssert" = "1" # 1s register "PmConfigSlpSusMinAssert" = "1" # 500ms
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board) - register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1 - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2 - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board) - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex) - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1 - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2 - # PL2 override 15W register "power_limits_config" = "{ .tdp_pl2_override = 15, @@ -27,6 +15,23 @@ register "tcc_offset" = "10"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC2), // Type-C Port (board) + [1] = USB2_PORT_MAX(OC3), // Type-C Port (flex) + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_MID(OC0), // Type-A Port 1 + [6] = USB2_PORT_FLEX(OC_SKIP), // Camera + [8] = USB2_PORT_MID(OC1), // Type-A Port 2 + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC2), // Type-C Port (board) + [1] = USB3_PORT_DEFAULT(OC3), // Type-C Port (flex) + [2] = USB3_PORT_DEFAULT(OC0), // Type-A Port 1 + [3] = USB3_PORT_DEFAULT(OC1), // Type-A Port 2 + }" + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""ELAN0001"" diff --git a/src/mainboard/google/glados/variants/lars/overridetree.cb b/src/mainboard/google/glados/variants/lars/overridetree.cb index 2616044..1165520 100644 --- a/src/mainboard/google/glados/variants/lars/overridetree.cb +++ b/src/mainboard/google/glados/variants/lars/overridetree.cb @@ -1,18 +1,23 @@ chip soc/intel/skylake
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD - register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC0), // Type-C Port 1 + [1] = USB2_PORT_FLEX(OC_SKIP), // Camera + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_MID(OC2), // Type-A Port (card) + [5] = USB2_PORT_MID(OC_SKIP), // SD + [8] = USB2_PORT_LONG(OC3), // Type-A Port (board) + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC_SKIP), // SD + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Port (card) + [3] = USB3_PORT_DEFAULT(OC3), // Type-A Port (board) + }" + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""ELAN0001"" diff --git a/src/mainboard/google/glados/variants/sentry/overridetree.cb b/src/mainboard/google/glados/variants/sentry/overridetree.cb index e052502..f59108c 100644 --- a/src/mainboard/google/glados/variants/sentry/overridetree.cb +++ b/src/mainboard/google/glados/variants/sentry/overridetree.cb @@ -1,17 +1,5 @@ chip soc/intel/skylake
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - # I2C0 is 3.3V register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
@@ -19,6 +7,23 @@ register "sdcard_cd_gpio" = "GPP_A7"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC0), // Type-C Port 1 + [1] = USB2_PORT_TYPE_C(OC1), // Type-C Port 2 + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_MID(OC2), // Type-A Port (card) + [6] = USB2_PORT_FLEX(OC_SKIP), // Camera + [8] = USB2_PORT_LONG(OC3), // Type-A Port (board) + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 2 + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Port (card) + [3] = USB3_PORT_DEFAULT(OC3), // Type-A Port (board) + }" + end device ref i2c0 on chip drivers/i2c/generic register "hid" = ""RAYD0001"" diff --git a/src/mainboard/google/poppy/variants/atlas/devicetree.cb b/src/mainboard/google/poppy/variants/atlas/devicetree.cb index 181c77b..8b821f6 100644 --- a/src/mainboard/google/poppy/variants/atlas/devicetree.cb +++ b/src/mainboard/google/poppy/variants/atlas/devicetree.cb @@ -140,15 +140,6 @@ register "PcieRpAdvancedErrorReporting[0]" = "1" register "PcieRpLtrEnable[0]" = "1"
- # USB 2.0 - register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 - register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 - - # USB 3.0 - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -231,6 +222,17 @@ device ref imgu on end device ref ish off end device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC0), // Type-C Port 1 + [2] = USB2_PORT_SHORT(OC_SKIP), // Bluetooth + [4] = USB2_PORT_LONG(OC1), // Type-C Port 2 + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 2 + }" + chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" diff --git a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb index 0317139..8fbed5a 100644 --- a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb @@ -130,17 +130,6 @@ # RP 1 uses CLK SRC 1 register "PcieRpClkSrcNumber[0]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -251,7 +240,22 @@ device ref igpu on end device ref sa_thermal on end device ref imgu on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC0), // Type-C Port 1 + [1] = USB2_PORT_MID(OC_SKIP), // Type-A Port + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_LONG(OC1), // Type-C Port 2 + [6] = USB2_PORT_MID(OC_SKIP), // Type-A Port + [8] = USB2_PORT_MID(OC_SKIP), // Type-A Port + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 2 + [2] = USB3_PORT_DEFAULT(OC_SKIP), // Type-A Port + }" + end device ref south_xdci on end device ref thermal on end device ref cio on end diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb index 2bb5e11..c851c37 100644 --- a/src/mainboard/google/poppy/variants/nami/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb @@ -167,19 +167,6 @@ register "PcieRpAdvancedErrorReporting[8]" = "1" register "PcieRpLtrEnable[8]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 0 - register "usb2_ports[1]" = "USB2_PORT_LONG(OC1)" # Type-C Port 1 - register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Port - register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Card reader - register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # WiFi - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Rear camera - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Front camera - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 0 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 1 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card reader - # Touchscreen register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
@@ -276,7 +263,24 @@ device ref igpu on end device ref sa_thermal on end device ref imgu off end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC0), // Type-C Port 0 + [1] = USB2_PORT_LONG(OC1), // Type-C Port 1 + [2] = USB2_PORT_MID(OC2), // Type-A Port + [3] = USB2_PORT_MID(OC_SKIP), // Card reader + [4] = USB2_PORT_MID(OC_SKIP), // WiFi + [5] = USB2_PORT_MID(OC_SKIP), // Rear camera + [6] = USB2_PORT_MID(OC_SKIP), // Front camera + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 0 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 1 + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Port + [3] = USB3_PORT_DEFAULT(OC_SKIP), // Card reader + }" + end device ref south_xdci on end device ref thermal on end device ref cio off end diff --git a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb index 29233c9..122fb15 100644 --- a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb @@ -148,18 +148,6 @@ # RP 1, Enable Latency Tolerance Reporting Mechanism register "PcieRpLtrEnable[0]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC1)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_SHORT(OC2)" # Type-A Port - register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_LONG(OC0)" # Type-C Port 2 - register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # H1 - register "usb2_ports[8]" = "USB2_PORT_SHORT(OC_SKIP)" # Camera - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # LTE module - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -282,7 +270,23 @@ device ref igpu on end device ref sa_thermal on end device ref imgu on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC1), // Type-C Port 1 + [1] = USB2_PORT_SHORT(OC2), // Type-A Port + [2] = USB2_PORT_SHORT(OC_SKIP), // Bluetooth + [4] = USB2_PORT_LONG(OC0), // Type-C Port 2 + [6] = USB2_PORT_SHORT(OC_SKIP), // H1 + [8] = USB2_PORT_SHORT(OC_SKIP), // Camera + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC1), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC0), // Type-C Port 2 + [2] = USB3_PORT_DEFAULT(OC2), // Type-A Port + [3] = USB3_PORT_DEFAULT(OC_SKIP), // LTE module + }" + end device ref south_xdci on end device ref thermal on end device ref cio on end diff --git a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb index 1ef0b45..140f5f8 100644 --- a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb @@ -147,16 +147,6 @@ register "PcieRpAdvancedErrorReporting[8]" = "1" register "PcieRpLtrEnable[8]" = "1"
- # USB 2.0 - register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 - register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 - register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # pogo port - - # USB 3.0 - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -247,6 +237,18 @@ device ref sa_thermal on end device ref imgu on end device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC0), // Type-C Port 1 + [2] = USB2_PORT_SHORT(OC_SKIP), // Bluetooth + [4] = USB2_PORT_LONG(OC1), // Type-C Port 2 + [6] = USB2_PORT_LONG(OC_SKIP), // pogo port + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 2 + }" + chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" diff --git a/src/mainboard/google/poppy/variants/rammus/devicetree.cb b/src/mainboard/google/poppy/variants/rammus/devicetree.cb index 42528cf..823df7c 100644 --- a/src/mainboard/google/poppy/variants/rammus/devicetree.cb +++ b/src/mainboard/google/poppy/variants/rammus/devicetree.cb @@ -137,17 +137,6 @@ # RP 1, Enable Latency Tolerance Reporting Mechanism register "PcieRpLtrEnable[0]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_SHORT(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-A Port - register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 - register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # H1 - register "usb2_ports[8]" = "USB2_PORT_SHORT(OC_SKIP)" # Camera - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -233,6 +222,20 @@ device ref sa_thermal on end device ref imgu off end device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_SHORT(OC0), // Type-C Port 1 + [1] = USB2_PORT_LONG(OC3), // Type-A Port + [2] = USB2_PORT_SHORT(OC_SKIP), // Bluetooth + [4] = USB2_PORT_LONG(OC1), // Type-C Port 2 + [6] = USB2_PORT_SHORT(OC_SKIP), // H1 + [8] = USB2_PORT_SHORT(OC_SKIP), // Camera + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 2 + [2] = USB3_PORT_DEFAULT(OC3), // Type-A Port + }" chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" diff --git a/src/mainboard/google/poppy/variants/soraka/devicetree.cb b/src/mainboard/google/poppy/variants/soraka/devicetree.cb index fb8aad2..e877260 100644 --- a/src/mainboard/google/poppy/variants/soraka/devicetree.cb +++ b/src/mainboard/google/poppy/variants/soraka/devicetree.cb @@ -139,17 +139,6 @@ # RP 1 uses CLK SRC 1 register "PcieRpClkSrcNumber[0]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Type-C Port 2 - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | @@ -261,7 +250,22 @@ device ref igpu on end device ref sa_thermal on end device ref imgu on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_LONG(OC0), // Type-C Port 1 + [1] = USB2_PORT_MID(OC_SKIP), // Type-A Port + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [4] = USB2_PORT_MAX(OC1), // Type-C Port 2 + [6] = USB2_PORT_MID(OC_SKIP), // Type-A Port + [8] = USB2_PORT_MID(OC_SKIP), // Type-A Port + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), // Type-C Port 1 + [1] = USB3_PORT_DEFAULT(OC1), // Type-C Port 2 + [2] = USB3_PORT_DEFAULT(OC_SKIP), // Type-A Port + }" + end device ref south_xdci on end device ref thermal on end device ref cio on end diff --git a/src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb index b580e76..f2e569d 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb @@ -46,35 +46,6 @@ # USB related register "SsicPortEnable" = "1"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MID(OC_SKIP), /* OTG */ - [1] = USB2_PORT_MID(OC3), /* Touch Pad */ - [2] = USB2_PORT_MID(OC_SKIP), /* M.2 BT */ - [3] = USB2_PORT_MID(OC_SKIP), /* Touch Panel */ - [4] = USB2_PORT_MID(OC_SKIP), /* M.2 WWAN */ - [5] = USB2_PORT_MID(OC0), /* Front Panel */ - [6] = USB2_PORT_MID(OC0), /* Front Panel */ - [7] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ - [8] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ - [9] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ - [10] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ - [11] = USB2_PORT_MID(OC_SKIP), /* Finger print sensor */ - [12] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ - [13] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC5), /* OTG */ - [1] = USB3_PORT_DEFAULT(OC_SKIP), /* M.2 WWAN */ - [2] = USB3_PORT_DEFAULT(OC3), /* Flex */ - [3] = USB3_PORT_DEFAULT(OC_SKIP), /* IVCAM */ - [4] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ - [5] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ - [6] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ - [7] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ - [8] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ - [9] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ - }"
register "SataSalpSupport" = "1" register "SataPortsEnable" = "{ @@ -107,6 +78,37 @@ }"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC_SKIP), /* OTG */ + [1] = USB2_PORT_MID(OC3), /* Touch Pad */ + [2] = USB2_PORT_MID(OC_SKIP), /* M.2 BT */ + [3] = USB2_PORT_MID(OC_SKIP), /* Touch Panel */ + [4] = USB2_PORT_MID(OC_SKIP), /* M.2 WWAN */ + [5] = USB2_PORT_MID(OC0), /* Front Panel */ + [6] = USB2_PORT_MID(OC0), /* Front Panel */ + [7] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ + [8] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ + [9] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ + [10] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ + [11] = USB2_PORT_MID(OC_SKIP), /* Finger print sensor */ + [12] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ + [13] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC5), /* OTG */ + [1] = USB3_PORT_DEFAULT(OC_SKIP), /* M.2 WWAN */ + [2] = USB3_PORT_DEFAULT(OC3), /* Flex */ + [3] = USB3_PORT_DEFAULT(OC_SKIP), /* IVCAM */ + [4] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ + [5] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ + [6] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ + [7] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ + [8] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ + [9] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ + }" + end device ref sa_thermal off end device ref i2c2 off end device ref i2c3 off end diff --git a/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb index b7c4395..81557eb 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb @@ -74,26 +74,6 @@ # RP10, uses CLK SRC 4 register "PcieRpClkSrcNumber[9]" = "4"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MAX(OC0), /* TYPE-A Port */ - [1] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ - [2] = USB2_PORT_MAX(OC_SKIP), /* Bluetooth */ - [4] = USB2_PORT_MAX(OC_SKIP), /* Type-A Port */ - [5] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ - [6] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [7] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [8] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [9] = USB2_PORT_MAX(OC1), /* TYPE-A Port */ - [10] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [11] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC0), /* TYPE-A Port */ - [1] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ - [2] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ - [3] = USB3_PORT_DEFAULT(OC1), /* TYPE-A Port */ - }"
register "SsicPortEnable" = "1" # Enable SSIC for WWAN
@@ -113,6 +93,28 @@ }"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MAX(OC0), /* TYPE-A Port */ + [1] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ + [2] = USB2_PORT_MAX(OC_SKIP), /* Bluetooth */ + [4] = USB2_PORT_MAX(OC_SKIP), /* Type-A Port */ + [5] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ + [6] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [7] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [8] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [9] = USB2_PORT_MAX(OC1), /* TYPE-A Port */ + [10] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [11] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), /* TYPE-A Port */ + [1] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ + [2] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ + [3] = USB3_PORT_DEFAULT(OC1), /* TYPE-A Port */ + }" + end device ref imgu on end device ref cio on end device ref pcie_rp1 on end # x4 SLOT1 diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb index ce4bf4b..9e8c814 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb @@ -113,28 +113,6 @@ # RP 9 uses CLK SRC 1# register "PcieRpClkSrcNumber[8]" = "1"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MAX(OC0), /* TYPE-A Port */ - [1] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ - [2] = USB2_PORT_MAX(OC_SKIP), /* Bluetooth */ - [4] = USB2_PORT_MAX(OC1), /* Type-A Port */ - [5] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [6] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ - [7] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ - [8] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [9] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [10] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - [11] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC0), /* TYPE-A Port */ - [1] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ - [2] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ - [3] = USB3_PORT_DEFAULT(OC1), /* TYPE-A Port */ - [4] = USB3_PORT_DEFAULT(OC2), /* TYPE-A Port */ - [5] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ - }"
register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, @@ -154,6 +132,30 @@ register "sdcard_cd_gpio" = "GPP_G5"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MAX(OC0), /* TYPE-A Port */ + [1] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ + [2] = USB2_PORT_MAX(OC_SKIP), /* Bluetooth */ + [4] = USB2_PORT_MAX(OC1), /* Type-A Port */ + [5] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [6] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ + [7] = USB2_PORT_MAX(OC2), /* TYPE-A Port */ + [8] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [9] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [10] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + [11] = USB2_PORT_MAX(OC_SKIP), /* TYPE-A Port */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), /* TYPE-A Port */ + [1] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ + [2] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ + [3] = USB3_PORT_DEFAULT(OC1), /* TYPE-A Port */ + [4] = USB3_PORT_DEFAULT(OC2), /* TYPE-A Port */ + [5] = USB3_PORT_DEFAULT(OC_SKIP), /* TYPE-A Port */ + }" + end device ref i2c2 off end device ref i2c3 off end device ref sata on end diff --git a/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb index 2291c63..8e70c1e 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp8/overridetree.cb @@ -95,35 +95,6 @@ register "PcieRpClkReqNumber[8]" = "6" register "PcieRpClkReqNumber[16]" = "7"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MAX(OC2), /* Type-C Port */ - [1] = USB2_PORT_MAX(OC5), /* Front panel */ - [2] = USB2_PORT_MAX(OC4), /* Back panel */ - [3] = USB2_PORT_MAX(OC4), /* Back panel */ - [4] = USB2_PORT_MAX(OC1), /* Back panel-1 */ - [5] = USB2_PORT_MAX(OC1), /* Back panel */ - [6] = USB2_PORT_MAX(OC_SKIP), /* Back panel */ - [7] = USB2_PORT_MAX(OC_SKIP), /* Front panel */ - [8] = USB2_PORT_MAX(OC_SKIP), /* M.2 BT */ - [9] = USB2_PORT_MAX(OC2), /* Front panel */ - [10] = USB2_PORT_MAX(OC_SKIP), /* Back panel */ - [11] = USB2_PORT_MAX(OC_SKIP), /* Back panel-1 */ - [12] = USB2_PORT_MAX(OC3), /* Back panel */ - [13] = USB2_PORT_MAX(OC_SKIP), /* Back panel */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-C Port */ - [1] = USB3_PORT_DEFAULT(OC1), /* Back panel */ - [2] = USB3_PORT_DEFAULT(OC1), /* Back panel */ - [3] = USB3_PORT_DEFAULT(OC0), /* Back panel-2 */ - [4] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ - [5] = USB3_PORT_DEFAULT(OC_SKIP), /* Front Panel */ - [6] = USB3_PORT_DEFAULT(OC2), /* Front Panel */ - [7] = USB3_PORT_DEFAULT(OC2), /* Front Panel */ - [8] = USB3_PORT_DEFAULT(OC3), /* Back panel */ - [9] = USB3_PORT_DEFAULT(OC_SKIP), /* LAN */ - }"
register "SsicPortEnable" = "1" # Enable SSIC for WWAN
@@ -160,6 +131,37 @@ }"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MAX(OC2), /* Type-C Port */ + [1] = USB2_PORT_MAX(OC5), /* Front panel */ + [2] = USB2_PORT_MAX(OC4), /* Back panel */ + [3] = USB2_PORT_MAX(OC4), /* Back panel */ + [4] = USB2_PORT_MAX(OC1), /* Back panel-1 */ + [5] = USB2_PORT_MAX(OC1), /* Back panel */ + [6] = USB2_PORT_MAX(OC_SKIP), /* Back panel */ + [7] = USB2_PORT_MAX(OC_SKIP), /* Front panel */ + [8] = USB2_PORT_MAX(OC_SKIP), /* M.2 BT */ + [9] = USB2_PORT_MAX(OC2), /* Front panel */ + [10] = USB2_PORT_MAX(OC_SKIP), /* Back panel */ + [11] = USB2_PORT_MAX(OC_SKIP), /* Back panel-1 */ + [12] = USB2_PORT_MAX(OC3), /* Back panel */ + [13] = USB2_PORT_MAX(OC_SKIP), /* Back panel */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-C Port */ + [1] = USB3_PORT_DEFAULT(OC1), /* Back panel */ + [2] = USB3_PORT_DEFAULT(OC1), /* Back panel */ + [3] = USB3_PORT_DEFAULT(OC0), /* Back panel-2 */ + [4] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ + [5] = USB3_PORT_DEFAULT(OC_SKIP), /* Front Panel */ + [6] = USB3_PORT_DEFAULT(OC2), /* Front Panel */ + [7] = USB3_PORT_DEFAULT(OC2), /* Front Panel */ + [8] = USB3_PORT_DEFAULT(OC3), /* Back panel */ + [9] = USB3_PORT_DEFAULT(OC_SKIP), /* LAN */ + }" + end device ref i2c2 off end device ref i2c3 off end device ref sata on end diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb index d09a4d1..45f7103 100644 --- a/src/mainboard/intel/kunimitsu/devicetree.cb +++ b/src/mainboard/intel/kunimitsu/devicetree.cb @@ -117,21 +117,6 @@ register "PcieRpClkReqNumber[0]" = "1" register "PcieRpClkReqNumber[4]" = "2"
- register "usb2_ports" = "{ - [0] = USB2_PORT_TYPE_C(OC0), /* Type-C Port 1 */ - [1] = USB2_PORT_TYPE_C(OC1), /* Type-C Port 2 */ - [2] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */ - [4] = USB2_PORT_MID(OC2), /* Type-A Port (card) */ - [6] = USB2_PORT_FLEX(OC_SKIP), /* Camera */ - [8] = USB2_PORT_LONG(OC3), /* Type-A Port (board) */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC0), /* Type-C Port 1 */ - [1] = USB3_PORT_DEFAULT(OC1), /* Type-C Port 2 */ - [2] = USB3_PORT_DEFAULT(OC2), /* Type-A Port (card) */ - [3] = USB3_PORT_DEFAULT(OC3), /* Type-A Port (board) */ - }"
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
@@ -164,7 +149,23 @@ device domain 0 on device ref igpu on end device ref sa_thermal on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC0), /* Type-C Port 1 */ + [1] = USB2_PORT_TYPE_C(OC1), /* Type-C Port 2 */ + [2] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */ + [4] = USB2_PORT_MID(OC2), /* Type-A Port (card) */ + [6] = USB2_PORT_FLEX(OC_SKIP), /* Camera */ + [8] = USB2_PORT_LONG(OC3), /* Type-A Port (board) */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), /* Type-C Port 1 */ + [1] = USB3_PORT_DEFAULT(OC1), /* Type-C Port 2 */ + [2] = USB3_PORT_DEFAULT(OC2), /* Type-A Port (card) */ + [3] = USB3_PORT_DEFAULT(OC3), /* Type-A Port (board) */ + }" + end device ref thermal on end device ref i2c0 on chip drivers/i2c/generic diff --git a/src/mainboard/intel/saddlebrook/devicetree.cb b/src/mainboard/intel/saddlebrook/devicetree.cb index d888de4..067cb59 100644 --- a/src/mainboard/intel/saddlebrook/devicetree.cb +++ b/src/mainboard/intel/saddlebrook/devicetree.cb @@ -125,35 +125,6 @@ # USB related register "SsicPortEnable" = "1"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MID(OC_SKIP), /* OTG */ - [1] = USB2_PORT_MID(OC3), /* Touch Pad */ - [2] = USB2_PORT_MID(OC_SKIP), /* M.2 BT */ - [3] = USB2_PORT_MID(OC_SKIP), /* Touch Panel */ - [4] = USB2_PORT_MID(OC_SKIP), /* M.2 WWAN */ - [5] = USB2_PORT_MID(OC0), /* Front Panel */ - [6] = USB2_PORT_MID(OC0), /* Front Panel */ - [7] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ - [8] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ - [9] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ - [10] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ - [11] = USB2_PORT_MID(OC_SKIP), /* Finger print sensor */ - [12] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ - [13] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC5), /* OTG */ - [1] = USB3_PORT_DEFAULT(OC_SKIP), /* M.2 WWAN */ - [2] = USB3_PORT_DEFAULT(OC3), /* Flex */ - [3] = USB3_PORT_DEFAULT(OC_SKIP), /* IVCAM */ - [4] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ - [5] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ - [6] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ - [7] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ - [8] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ - [9] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ - }"
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V
@@ -197,7 +168,37 @@
device domain 0 on device ref igpu on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC_SKIP), /* OTG */ + [1] = USB2_PORT_MID(OC3), /* Touch Pad */ + [2] = USB2_PORT_MID(OC_SKIP), /* M.2 BT */ + [3] = USB2_PORT_MID(OC_SKIP), /* Touch Panel */ + [4] = USB2_PORT_MID(OC_SKIP), /* M.2 WWAN */ + [5] = USB2_PORT_MID(OC0), /* Front Panel */ + [6] = USB2_PORT_MID(OC0), /* Front Panel */ + [7] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ + [8] = USB2_PORT_MID(OC2), /* Stacked conn (lan + usb) */ + [9] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ + [10] = USB2_PORT_MID(OC1), /* LAN MAGJACK */ + [11] = USB2_PORT_MID(OC_SKIP), /* Finger print sensor */ + [12] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ + [13] = USB2_PORT_MID(OC4), /* USB 2 stack conn */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC5), /* OTG */ + [1] = USB3_PORT_DEFAULT(OC_SKIP), /* M.2 WWAN */ + [2] = USB3_PORT_DEFAULT(OC3), /* Flex */ + [3] = USB3_PORT_DEFAULT(OC_SKIP), /* IVCAM */ + [4] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ + [5] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ + [6] = USB3_PORT_DEFAULT(OC0), /* Front Panel */ + [7] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ + [8] = USB3_PORT_DEFAULT(OC2), /* Stack Conn */ + [9] = USB3_PORT_DEFAULT(OC1), /* LAN MAGJACK */ + }" + end device ref thermal on end device ref i2c0 on end device ref i2c1 on end diff --git a/src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb b/src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb index ecfcd6f..6657fa9 100644 --- a/src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb +++ b/src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb @@ -8,19 +8,24 @@ register "PcieRpEnable[ 3]" = "1" register "PcieRpEnable[11]" = "1"
- register "usb2_ports[5]" = "USB2_PORT_LONG(OC2)" - register "usb2_ports[6]" = "USB2_PORT_LONG(OC3)" - register "usb2_ports[7]" = "USB2_PORT_LONG(OC3)" - register "usb2_ports[8]" = "USB2_PORT_MID(OC4)" - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" - register "SataPortsEnable[3]" = "1"
device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [5] = USB2_PORT_LONG(OC2), + [6] = USB2_PORT_LONG(OC3), + [7] = USB2_PORT_LONG(OC3), + [8] = USB2_PORT_MID(OC4), + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC0), + [1] = USB3_PORT_DEFAULT(OC0), + [2] = USB3_PORT_DEFAULT(OC1), + [3] = USB3_PORT_DEFAULT(OC1), + }" + end device ref pcie_rp1 on end device ref pcie_rp2 on end device ref pcie_rp3 on end diff --git a/src/mainboard/libretrend/lt1000/devicetree.cb b/src/mainboard/libretrend/lt1000/devicetree.cb index dd2fc60..d6bc990 100644 --- a/src/mainboard/libretrend/lt1000/devicetree.cb +++ b/src/mainboard/libretrend/lt1000/devicetree.cb @@ -125,24 +125,6 @@ register "PcieRpClkSrcNumber[10]" = "3" register "PcieRpClkSrcNumber[11]" = "3"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (right) */ - [1] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (right) */ - [2] = USB2_PORT_MID(OC_SKIP), /* WiFi */ - [3] = USB2_PORT_MID(OC_SKIP), /* F_USB3 header */ - [4] = USB2_PORT_MID(OC_SKIP), /* F_USB3 header */ - [5] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (left) */ - [6] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (left) */ - [7] = USB2_PORT_MID(OC_SKIP), /* GL850G for F_USB1 and F_USB2 headers */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A Port (right) */ - [1] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A Port (right) */ - [2] = USB3_PORT_DEFAULT(OC_SKIP), /* F_USB3 header */ - [3] = USB3_PORT_DEFAULT(OC_SKIP), /* F_USB3 header */ - }" - # PL2 override 25W register "power_limits_config" = "{ .tdp_pl2_override = 25, @@ -154,7 +136,25 @@ device domain 0 on device ref igpu on end device ref sa_thermal on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (right) */ + [1] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (right) */ + [2] = USB2_PORT_MID(OC_SKIP), /* WiFi */ + [3] = USB2_PORT_MID(OC_SKIP), /* F_USB3 header */ + [4] = USB2_PORT_MID(OC_SKIP), /* F_USB3 header */ + [5] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (left) */ + [6] = USB2_PORT_MID(OC_SKIP), /* Type-A Port (left) */ + [7] = USB2_PORT_MID(OC_SKIP), /* GL850G for F_USB1 and F_USB2 headers */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A Port (right) */ + [1] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A Port (right) */ + [2] = USB3_PORT_DEFAULT(OC_SKIP), /* F_USB3 header */ + [3] = USB3_PORT_DEFAULT(OC_SKIP), /* F_USB3 header */ + }" + end device ref south_xdci on end device ref thermal on end device ref heci1 on end diff --git a/src/mainboard/protectli/vault_kbl/devicetree.cb b/src/mainboard/protectli/vault_kbl/devicetree.cb index f57f978..6148196 100644 --- a/src/mainboard/protectli/vault_kbl/devicetree.cb +++ b/src/mainboard/protectli/vault_kbl/devicetree.cb @@ -152,23 +152,6 @@ # RP 9 shares CLKSRC5# with RP 6 register "PcieRpClkSrcNumber[8]" = "5"
- - # USB 2.0 enable ports 1-8, disable ports 9-12 - register "usb2_ports[0]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port - register "usb2_ports[1]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port - register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port - register "usb2_ports[3]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port - register "usb2_ports[4]" = "USB2_PORT_SHORT(OC_SKIP)" # Type-A Port - register "usb2_ports[5]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port - register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port - register "usb2_ports[7]" = "USB2_PORT_SHORT(OC_SKIP)" # mPCIe slot - - # USB 3.0 enable ports 1-4, disable ports 5-6 - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port - register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoDisabled, [PchSerialIoIndexI2C1] = PchSerialIoDisabled, @@ -185,7 +168,25 @@
device domain 0 on device ref igpu on end - device ref south_xhci on end + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_SHORT(OC_SKIP), // TYPE-A Port + [1] = USB2_PORT_SHORT(OC_SKIP), // TYPE-A Port + [2] = USB2_PORT_SHORT(OC_SKIP), // TYPE-A Port + [3] = USB2_PORT_SHORT(OC_SKIP), // TYPE-A Port + [4] = USB2_PORT_SHORT(OC_SKIP), // Type-A Port + [5] = USB2_PORT_SHORT(OC_SKIP), // TYPE-A Port + [6] = USB2_PORT_SHORT(OC_SKIP), // TYPE-A Port + [7] = USB2_PORT_SHORT(OC_SKIP), // mPCIe slot + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), // TYPE-A Port + [1] = USB3_PORT_DEFAULT(OC_SKIP), // TYPE-A Port + [2] = USB3_PORT_DEFAULT(OC_SKIP), // TYPE-A Port + [3] = USB3_PORT_DEFAULT(OC_SKIP), // TYPE-A Port + }" + end device ref heci1 on end device ref sata on end device ref pcie_rp1 on end diff --git a/src/mainboard/purism/librem_skl/variants/librem13/overridetree.cb b/src/mainboard/purism/librem_skl/variants/librem13/overridetree.cb index 18ce220..08cf745 100644 --- a/src/mainboard/purism/librem_skl/variants/librem13/overridetree.cb +++ b/src/mainboard/purism/librem_skl/variants/librem13/overridetree.cb @@ -1,17 +1,23 @@ chip soc/intel/skylake
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port - register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-A Port (right) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[3]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[5]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # SD + device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC_SKIP), // Type-C Port + [1] = USB2_PORT_MID(OC0), // Type-A Port (right) + [2] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [3] = USB2_PORT_FLEX(OC_SKIP), // Camera + [5] = USB2_PORT_FLEX(OC2), // Type-A Port (left) + [6] = USB2_PORT_MID(OC_SKIP), // SD + }"
- # OC1 should be for Type-C but it seems to not have been wired, according to - # the available schematics, even though it is labeled as USB_OC_TYPEC. - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port (right) - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - - device domain 0 on end + # OC1 should be for Type-C but it seems to not have been wired, according to + # the available schematics, even though it is labeled as USB_OC_TYPEC. + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port + [1] = USB3_PORT_DEFAULT(OC0), // Type-A Port (right) + [2] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port + }" + end + end end diff --git a/src/mainboard/purism/librem_skl/variants/librem15/overridetree.cb b/src/mainboard/purism/librem_skl/variants/librem15/overridetree.cb index 343944e..fa76a78 100644 --- a/src/mainboard/purism/librem_skl/variants/librem15/overridetree.cb +++ b/src/mainboard/purism/librem_skl/variants/librem15/overridetree.cb @@ -5,23 +5,28 @@ # SRCCLKREQ2# for NVMe per schematic register "PcieRpClkReqNumber[8]" = "2"
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port - register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) - register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) - register "usb2_ports[3]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) - register "usb2_ports[4]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[7]" = "USB2_PORT_FLEX(OC_SKIP)" # SD - - # OC0 should be for Type-C but it seems to not have been wired, according to - # the available schematics, even though it is labeled as USB_OC_TYPEC. - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_TYPE_C(OC_SKIP), // Type-C Port + [1] = USB2_PORT_MID(OC1), // Type-A Port (right) + [2] = USB2_PORT_MID(OC1), // Type-A Port (right) + [3] = USB2_PORT_FLEX(OC2), // Type-A Port (left) + [4] = USB2_PORT_FLEX(OC2), // Type-A Port (left) + [5] = USB2_PORT_MID(OC_SKIP), // Bluetooth + [6] = USB2_PORT_FLEX(OC_SKIP), // Camera + [7] = USB2_PORT_FLEX(OC_SKIP), // SD + }" + + # OC0 should be for Type-C but it seems to not have been wired, according to + # the available schematics, even though it is labeled as USB_OC_TYPEC. + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port + [1] = USB3_PORT_DEFAULT(OC1), // Type-A Port (right) + [2] = USB3_PORT_DEFAULT(OC1), // Type-A Port (right) + [3] = USB3_PORT_DEFAULT(OC_SKIP), // Type-C Port + }" + end device ref pcie_rp5 on end end end diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb index 98bfb04..4063bed 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-f/overridetree.cb @@ -15,32 +15,33 @@ # This board has an IGD with no output. register "PrimaryDisplay" = "Display_Auto"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MID(OC0), /* USB 2 */ - [1] = USB2_PORT_MID(OC0), /* USB 3 */ - [2] = USB2_PORT_MID(OC1), /* USB 4 */ - [3] = USB2_PORT_MID(OC1), /* USB 5 */ - [4] = USB2_PORT_MID(OC2), /* USB 0 */ - [5] = USB2_PORT_MID(OC2), /* USB 1 */ - [8] = USB2_PORT_MID(OC3), /* USB 9 (3.0) */ - [9] = USB2_PORT_MID(OC5), /* USB 8 (3.0) */ - [10] = USB2_PORT_MID(OC4), /* USB 6 (3.0) */ - [11] = USB2_PORT_MID(OC4), /* USB 7 (3.0) */ - [12] = USB2_PORT_MID(OC3), /* USB 10 (3.0) */ - [13] = USB2_PORT_MID(OC_SKIP), /* IPMI USB hub */ - [14] = USB2_PORT_MID(OC0), /* Unknown */ - [15] = USB2_PORT_MID(OC0), /* Unknown */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC5), /* USB 8 */ - [1] = USB3_PORT_DEFAULT(OC4), /* USB 6 */ - [2] = USB3_PORT_DEFAULT(OC4), /* USB 7 */ - [3] = USB3_PORT_DEFAULT(OC3), /* USB 9 */ - [4] = USB3_PORT_DEFAULT(OC3), /* USB 10 */ - }" - device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC0), /* USB 2 */ + [1] = USB2_PORT_MID(OC0), /* USB 3 */ + [2] = USB2_PORT_MID(OC1), /* USB 4 */ + [3] = USB2_PORT_MID(OC1), /* USB 5 */ + [4] = USB2_PORT_MID(OC2), /* USB 0 */ + [5] = USB2_PORT_MID(OC2), /* USB 1 */ + [8] = USB2_PORT_MID(OC3), /* USB 9 (3.0) */ + [9] = USB2_PORT_MID(OC5), /* USB 8 (3.0) */ + [10] = USB2_PORT_MID(OC4), /* USB 6 (3.0) */ + [11] = USB2_PORT_MID(OC4), /* USB 7 (3.0) */ + [12] = USB2_PORT_MID(OC3), /* USB 10 (3.0) */ + [13] = USB2_PORT_MID(OC_SKIP), /* IPMI USB hub */ + [14] = USB2_PORT_MID(OC0), /* Unknown */ + [15] = USB2_PORT_MID(OC0), /* Unknown */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC5), /* USB 8 */ + [1] = USB3_PORT_DEFAULT(OC4), /* USB 6 */ + [2] = USB3_PORT_DEFAULT(OC4), /* USB 7 */ + [3] = USB3_PORT_DEFAULT(OC3), /* USB 9 */ + [4] = USB3_PORT_DEFAULT(OC3), /* USB 10 */ + }" + end device ref peg0 on # Slot JPCIE3 smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthShort" "CPU SLOT6 PCI-E 3.0 X8(IN X16)" "SlotDataBusWidth8X" diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb index b46b220..035811f 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb @@ -14,32 +14,33 @@ # FIXME: find out why FSP crashes without this register "PchHdaVcType" = "Vc1"
- register "usb2_ports" = "{ - [0] = USB2_PORT_MID(OC0), /* USB 2 */ - [1] = USB2_PORT_MID(OC0), /* USB 3 */ - [2] = USB2_PORT_MID(OC1), /* USB 4 */ - [3] = USB2_PORT_MID(OC1), /* USB 5 */ - [4] = USB2_PORT_MID(OC2), /* USB 0 */ - [5] = USB2_PORT_MID(OC2), /* USB 1 */ - [8] = USB2_PORT_MID(OC3), /* USB 9 (3.0) */ - [9] = USB2_PORT_MID(OC5), /* USB 8 (3.0) */ - [10] = USB2_PORT_MID(OC4), /* USB 6 (3.0) */ - [11] = USB2_PORT_MID(OC4), /* USB 7 (3.0) */ - [12] = USB2_PORT_MID(OC3), /* USB 10 (3.0) */ - [13] = USB2_PORT_MID(OC_SKIP), /* IPMI USB hub */ - [14] = USB2_PORT_MID(OC0), /* Unknown */ - [15] = USB2_PORT_MID(OC0), /* Unknown */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC5), /* USB 8 */ - [1] = USB3_PORT_DEFAULT(OC4), /* USB 6 */ - [2] = USB3_PORT_DEFAULT(OC4), /* USB 7 */ - [3] = USB3_PORT_DEFAULT(OC3), /* USB 9 */ - [4] = USB3_PORT_DEFAULT(OC3), /* USB 10 */ - }" - device domain 0 on + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC0), /* USB 2 */ + [1] = USB2_PORT_MID(OC0), /* USB 3 */ + [2] = USB2_PORT_MID(OC1), /* USB 4 */ + [3] = USB2_PORT_MID(OC1), /* USB 5 */ + [4] = USB2_PORT_MID(OC2), /* USB 0 */ + [5] = USB2_PORT_MID(OC2), /* USB 1 */ + [8] = USB2_PORT_MID(OC3), /* USB 9 (3.0) */ + [9] = USB2_PORT_MID(OC5), /* USB 8 (3.0) */ + [10] = USB2_PORT_MID(OC4), /* USB 6 (3.0) */ + [11] = USB2_PORT_MID(OC4), /* USB 7 (3.0) */ + [12] = USB2_PORT_MID(OC3), /* USB 10 (3.0) */ + [13] = USB2_PORT_MID(OC_SKIP), /* IPMI USB hub */ + [14] = USB2_PORT_MID(OC0), /* Unknown */ + [15] = USB2_PORT_MID(OC0), /* Unknown */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC5), /* USB 8 */ + [1] = USB3_PORT_DEFAULT(OC4), /* USB 6 */ + [2] = USB3_PORT_DEFAULT(OC4), /* USB 7 */ + [3] = USB3_PORT_DEFAULT(OC3), /* USB 9 */ + [4] = USB3_PORT_DEFAULT(OC3), /* USB 10 */ + }" + end device ref peg0 on end # unused device ref peg1 on # Slot JPCIE1 diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb index 29252fe..1b553d1 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb @@ -11,31 +11,32 @@ register "gen1_dec" = "0x007c0a01" # Super IO SWC register "gen2_dec" = "0x000c0ca1" # IPMI KCS
- register "usb2_ports" = "{ - [0] = USB2_PORT_MID(OC3), /* USB 9 (3.0) */ - [1] = USB2_PORT_MID(OC3), /* USB 8 (3.0) */ - [2] = USB2_PORT_MID(OC1), /* USB 3 */ - [3] = USB2_PORT_MID(OC1), /* USB 2 */ - [4] = USB2_PORT_MID(OC2), /* USB 1 */ - [5] = USB2_PORT_MID(OC2), /* USB 0 */ - [6] = USB2_PORT_MID(OC0), /* USB 5 */ - [7] = USB2_PORT_MID(OC0), /* USB 4 */ - [8] = USB2_PORT_MID(OC_SKIP), /* IPMI USB HUB */ - [9] = USB2_PORT_MID(OC5), /* USB 10 (3.0) */ - [10] = USB2_PORT_MID(OC4), /* USB 7 (3.0) */ - [11] = USB2_PORT_MID(OC4), /* USB 6 (3.0) */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC4), /* USB 7 */ - [1] = USB3_PORT_DEFAULT(OC4), /* USB 6 */ - [2] = USB3_PORT_DEFAULT(OC5), /* USB 10 */ - [3] = USB3_PORT_DEFAULT(OC3), /* USB 9 */ - [4] = USB3_PORT_DEFAULT(OC3), /* USB 8 */ - }" - device domain 0 on subsystemid 0x15d9 0x0896 inherit + device ref south_xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC3), /* USB 9 (3.0) */ + [1] = USB2_PORT_MID(OC3), /* USB 8 (3.0) */ + [2] = USB2_PORT_MID(OC1), /* USB 3 */ + [3] = USB2_PORT_MID(OC1), /* USB 2 */ + [4] = USB2_PORT_MID(OC2), /* USB 1 */ + [5] = USB2_PORT_MID(OC2), /* USB 0 */ + [6] = USB2_PORT_MID(OC0), /* USB 5 */ + [7] = USB2_PORT_MID(OC0), /* USB 4 */ + [8] = USB2_PORT_MID(OC_SKIP), /* IPMI USB HUB */ + [9] = USB2_PORT_MID(OC5), /* USB 10 (3.0) */ + [10] = USB2_PORT_MID(OC4), /* USB 7 (3.0) */ + [11] = USB2_PORT_MID(OC4), /* USB 6 (3.0) */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC4), /* USB 7 */ + [1] = USB3_PORT_DEFAULT(OC4), /* USB 6 */ + [2] = USB3_PORT_DEFAULT(OC5), /* USB 10 */ + [3] = USB3_PORT_DEFAULT(OC3), /* USB 9 */ + [4] = USB3_PORT_DEFAULT(OC3), /* USB 8 */ + }" + end device ref peg0 on # Slot JPCIE6 smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong" "CPU SLOT6 PCI-E 3.0 X8(IN X16)" "SlotDataBusWidth8X" diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssw-f/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssw-f/overridetree.cb index 29babda..17ba31b 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssw-f/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssw-f/overridetree.cb @@ -15,33 +15,34 @@ # This board has an IGD with no output. register "PrimaryDisplay" = "Display_Auto"
- # NB: Overcurrent OCx values untested - register "usb2_ports" = "{ - [0] = USB2_PORT_MID(OC3), /* USB 6 (3.0) */ - [1] = USB2_PORT_MID(OC3), /* USB 7 (3.0) */ - [2] = USB2_PORT_MID(OC2), /* USB 0 */ - [3] = USB2_PORT_MID(OC2), /* USB 1 */ - [4] = USB2_PORT_MID(OC1), /* USB 4 */ - [5] = USB2_PORT_MID(OC1), /* USB 5 */ - [8] = USB2_PORT_MID(OC0), /* USB 2 */ - [9] = USB2_PORT_MID(OC0), /* USB 3 */ - [10] = USB2_PORT_MID(OC5), /* USB 9 (3.0) */ - [11] = USB2_PORT_MID(OC5), /* USB 10 (3.0) */ - [12] = USB2_PORT_MID(OC4), /* USB 8 (3.0) */ - [13] = USB2_PORT_MID(OC_SKIP), /* IPMI USB hub */ - [14] = USB2_PORT_MID(OC0), /* Unknown */ - [15] = USB2_PORT_MID(OC0), /* Unknown */ - }" - - register "usb3_ports" = "{ - [0] = USB3_PORT_DEFAULT(OC3), /* USB 6 */ - [1] = USB3_PORT_DEFAULT(OC3), /* USB 7 */ - [2] = USB3_PORT_DEFAULT(OC4), /* USB 8 */ - [3] = USB3_PORT_DEFAULT(OC5), /* USB 9 */ - [4] = USB3_PORT_DEFAULT(OC5), /* USB 10 */ - }" - device domain 0 on + device ref south_xhci on + # NB: Overcurrent OCx values untested + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC3), /* USB 6 (3.0) */ + [1] = USB2_PORT_MID(OC3), /* USB 7 (3.0) */ + [2] = USB2_PORT_MID(OC2), /* USB 0 */ + [3] = USB2_PORT_MID(OC2), /* USB 1 */ + [4] = USB2_PORT_MID(OC1), /* USB 4 */ + [5] = USB2_PORT_MID(OC1), /* USB 5 */ + [8] = USB2_PORT_MID(OC0), /* USB 2 */ + [9] = USB2_PORT_MID(OC0), /* USB 3 */ + [10] = USB2_PORT_MID(OC5), /* USB 9 (3.0) */ + [11] = USB2_PORT_MID(OC5), /* USB 10 (3.0) */ + [12] = USB2_PORT_MID(OC4), /* USB 8 (3.0) */ + [13] = USB2_PORT_MID(OC_SKIP), /* IPMI USB hub */ + [14] = USB2_PORT_MID(OC0), /* Unknown */ + [15] = USB2_PORT_MID(OC0), /* Unknown */ + }" + + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC3), /* USB 6 */ + [1] = USB3_PORT_DEFAULT(OC3), /* USB 7 */ + [2] = USB3_PORT_DEFAULT(OC4), /* USB 8 */ + [3] = USB3_PORT_DEFAULT(OC5), /* USB 9 */ + [4] = USB3_PORT_DEFAULT(OC5), /* USB 10 */ + }" + end device ref peg0 on # Slot JSXB1B smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong" "CPU SLOT1 PCI-E 3.0 X16" "SlotDataBusWidth16X"
-
Felix Singer (Code Review)