Change in coreboot[master]: siemens/mc_apl4: Remove reduced clock rate for I2C0

[Werner Zeh (Code Review)]

Werner Zeh has submitted this change and it was merged. ( https://review.coreboot.org/29558 )

Change subject: siemens/mc_apl4: Remove reduced clock rate for I2C0
......................................................................

siemens/mc_apl4: Remove reduced clock rate for I2C0

There is no device on I2C0 which requires a lower clock rate.

Change-Id: Ib7c4e3251545b2d32368dd56206e3b4844a24800
Signed-off-by: Mario Scheithauer 
Reviewed-on: https://review.coreboot.org/29558
Tested-by: build bot (Jenkins) 
Reviewed-by: Werner Zeh 
---
M src/mainboard/siemens/mc_apl1/variants/mc_apl4/devicetree.cb
1 file changed, 0 insertions(+), 12 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Werner Zeh: Looks good to me, approved

diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/devicetree.cb b/src/mainboard/siemens/mc_apl1/variants/mc_apl4/devicetree.cb
index a2a2ba1..8c219af 100644
--- a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/devicetree.cb
+++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl4/devicetree.cb
@@ -47,18 +47,6 @@
    # 0:HS400(Default), 1:HS200, 2:DDR50
    register "emmc_host_max_speed" = "2"

-	# Intel Common SoC Config
-	#+-------------------+---------------------------+
-	#| Field             |  Value                    |
-	#+-------------------+---------------------------+
-	#| I2C0              | Proximity Sensor          |
-	#+-------------------+---------------------------+
-	register "common_soc_config" = "{
-		.i2c[0] = {
-			.speed = I2C_SPEED_STANDARD
-		},
-	}"
-
    device domain 0 on
    	device pci 00.0 on  end	# - Host Bridge
    	device pci 00.1 off end	# - DPTF