Change in coreboot[master]: mb/ocp/tiogapass: Implement port 80h direct to GPIO and init UART pins

[9elements QA (Code Review)]

9elements QA has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/40481 )

Change subject: mb/ocp/tiogapass: Implement port 80h direct to GPIO and init UART pins
......................................................................

Patch Set 5:

Automatic boot test returned (PASS/FAIL/TOTAL): 4/0/4
Emulation targets:
"QEMU x86 q35/ich9" using payload TianoCore : SUCCESS : https://lava.9esec.io/r/2946
"QEMU x86 q35/ich9" using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/2945
"QEMU x86 i440fx/piix4" using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/2944
"QEMU AArch64" using payload LinuxBoot_u-root_kexec : SUCCESS : https://lava.9esec.io/r/2943

Please note: This test is under development and might not be accurate at all!