[XS] Change in coreboot[main]: mb/starlabs/starlite_adl: Disconnect PEDET GPIO

[Sean Rhodes (Code Review)]

Sean Rhodes has submitted this change. ( https://review.coreboot.org/c/coreboot/+/86235?usp=email )

Change subject: mb/starlabs/starlite_adl: Disconnect PEDET GPIO
......................................................................

mb/starlabs/starlite_adl: Disconnect PEDET GPIO

This GPIO is only used for SATA SSDs so set it as not
connected.

Change-Id: I42c0ec36eee81a849f744a2d03862797f2463921
Signed-off-by: Sean Rhodes 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86235
Tested-by: build bot (Jenkins) 
Reviewed-by: Matt DeVillier 
---
M src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
1 file changed, 2 insertions(+), 2 deletions(-)

Approvals:
  Matt DeVillier: Looks good to me, approved
  build bot (Jenkins): Verified

diff --git a/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c b/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
index 0bf0cd8..4ca0ca5 100644
--- a/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
+++ b/src/mainboard/starlabs/starlite_adl/variants/mk_v/gpio.c
@@ -60,8 +60,8 @@
    /* A10:		ESPI Reset					*/
    /* A11:		Webcam Camera Reset				*/
    PAD_NC(GPP_A11, NONE),
-	/* A12:		PCH M.2 SSD PEDET				*/
-	PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
+	/* A12:		Not Connected					*/
+	PAD_NC(GPP_A12, NONE),
    /* A13:		BlueTooth RF Kill				*/
    PAD_CFG_GPO_GPIO_DRIVER(GPP_A13, 1, DEEP, NONE),
    /* A14:		Camera Power Enable				*/