Patch set updated for coreboot: cpu/amd/fam10h-15h: Fix Family 15h boot hang when BSP lift enabled

[Timothy Pearson]

Timothy Pearson ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/13158

-gerrit

commit f4c65e48ea2ef9a1814573b7f02d0d91baad8238
Author: Timothy Pearson 
Date:   Tue Nov 24 14:11:58 2015 -0600

cpu/amd/fam10h-15h: Fix Family 15h boot hang when BSP lift enabled

The existing code did not allow for the second core of the BSP to
    reside on an APIC ID other than 1, leading to a boot hang on Family
    15h processors when APIC_ID_OFFSET was set to anything other than 0.
    Furthermore, insufficient AP stack space was allocated for AP start.

Change-Id: I4ded3cfb3736149e2265848014352d7622d5042a
    Signed-off-by: Timothy Pearson 
---
 src/cpu/amd/family_10h-family_15h/Kconfig     | 2 +-
 src/cpu/amd/family_10h-family_15h/init_cpus.c | 8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/src/cpu/amd/family_10h-family_15h/Kconfig b/src/cpu/amd/family_10h-family_15h/Kconfig
index bfb6751..2f3dfc0 100644
--- a/src/cpu/amd/family_10h-family_15h/Kconfig
+++ b/src/cpu/amd/family_10h-family_15h/Kconfig
@@ -48,7 +48,7 @@ config DCACHE_BSP_STACK_SLUSH

config DCACHE_AP_STACK_SIZE
    hex
-	default 0x400
+	default 0x500

config UDELAY_IO
    bool
diff --git a/src/cpu/amd/family_10h-family_15h/init_cpus.c b/src/cpu/amd/family_10h-family_15h/init_cpus.c
index 5a67601..e8e81d2 100644
--- a/src/cpu/amd/family_10h-family_15h/init_cpus.c
+++ b/src/cpu/amd/family_10h-family_15h/init_cpus.c
@@ -356,6 +356,7 @@ static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
    uint32_t dword;
    uint8_t set_mtrrs;
    uint8_t node_count;
+	uint8_t fam15_bsp_core1_apicid;
    struct node_core_id id;

/* Please refer to the calculations and explaination in cache_as_ram.inc before modifying these values */
@@ -483,7 +484,12 @@ static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
    	if (is_fam15h()) {
    		/* core 1 on node 0 is special; to avoid corrupting the
    		 * BSP do not alter MTRRs on that core */
-			if (apicid == 1)
+			if (IS_ENABLED(CONFIG_ENABLE_APIC_EXT_ID) && (CONFIG_APIC_ID_OFFSET > 0))
+				fam15_bsp_core1_apicid = CONFIG_APIC_ID_OFFSET + 1;
+			else
+				fam15_bsp_core1_apicid = 1;
+
+			if (apicid == fam15_bsp_core1_apicid)
    			set_mtrrs = 0;
    		else
    			set_mtrrs = !!(apicid & 0x1);