Change in ...coreboot[master]: libpayload: Add UART for qcs405

[Prudhvi Yarlagadda (Code Review)]

Prudhvi Yarlagadda has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/29957 )

Change subject: libpayload: Add UART for qcs405
......................................................................

Patch Set 26:

(1 comment)

https://review.coreboot.org/#/c/29957/20/payloads/libpayload/drivers/serial/... 
File payloads/libpayload/drivers/serial/qcs405.c:

https://review.coreboot.org/#/c/29957/20/payloads/libpayload/drivers/serial/... 
PS20, Line 544: /* For simplicity sake let's rely on coreboot initalizing the UART. */
> Thanks ! we will release the remaining changes and continue to debug the current issue.

We have identified that uart rx command registers are getting reset at the end of coreboot stage due to which we are facing issues if we remove the initialization here.
Please let us know if we can go ahead by initializing only the UART rx command registers or do the complete UART initialization as it is there at present?