HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mb/{lipper,adlink}: Drop unmaintained ROMCC boards ......................................................................
mb/{lipper,adlink}: Drop unmaintained ROMCC boards
Change-Id: I031fd3538787323188f6c5f0d0bba082f6bdee7e Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/adlink/CM2-GF/board_info.txt D src/mainboard/adlink/Kconfig D src/mainboard/adlink/Kconfig.name D src/mainboard/adlink/cExpress-GFR/board_info.txt D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb.asl D src/mainboard/lippert/frontrunner-af/acpi_tables.c D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/mptable.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/romstage.c D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/toucan-af/BiosCallOuts.c D src/mainboard/lippert/toucan-af/Kconfig D src/mainboard/lippert/toucan-af/Kconfig.name D src/mainboard/lippert/toucan-af/Makefile.inc D src/mainboard/lippert/toucan-af/OemCustomize.c D src/mainboard/lippert/toucan-af/OptionsIds.h D src/mainboard/lippert/toucan-af/acpi/routing.asl D src/mainboard/lippert/toucan-af/acpi/sata.asl D src/mainboard/lippert/toucan-af/acpi/superio.asl D src/mainboard/lippert/toucan-af/acpi/usb.asl D src/mainboard/lippert/toucan-af/acpi_tables.c D src/mainboard/lippert/toucan-af/board_info.txt D src/mainboard/lippert/toucan-af/buildOpts.c D src/mainboard/lippert/toucan-af/cmos.layout D src/mainboard/lippert/toucan-af/devicetree.cb D src/mainboard/lippert/toucan-af/dsdt.asl D src/mainboard/lippert/toucan-af/irq_tables.c D src/mainboard/lippert/toucan-af/mainboard.c D src/mainboard/lippert/toucan-af/mptable.c D src/mainboard/lippert/toucan-af/platform_cfg.h D src/mainboard/lippert/toucan-af/romstage.c 50 files changed, 0 insertions(+), 7,997 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/38358/1
diff --git a/src/mainboard/adlink/CM2-GF/board_info.txt b/src/mainboard/adlink/CM2-GF/board_info.txt deleted file mode 100644 index 4244bfc..0000000 --- a/src/mainboard/adlink/CM2-GF/board_info.txt +++ /dev/null @@ -1,8 +0,0 @@ -Category: half -Board name: CoreModule2-GF -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1277 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y -Clone of: lippert/frontrunner-af diff --git a/src/mainboard/adlink/Kconfig b/src/mainboard/adlink/Kconfig deleted file mode 100644 index f71d6a9..0000000 --- a/src/mainboard/adlink/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -if VENDOR_ADLINK - -comment "see under vendor LiPPERT" -# any further boards will then be ADLINK - -config MAINBOARD_VENDOR - string - default "ADLINK" - -endif # VENDOR_ADLINK diff --git a/src/mainboard/adlink/Kconfig.name b/src/mainboard/adlink/Kconfig.name deleted file mode 100644 index fb8d433..0000000 --- a/src/mainboard/adlink/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_ADLINK - bool "ADLINK" diff --git a/src/mainboard/adlink/cExpress-GFR/board_info.txt b/src/mainboard/adlink/cExpress-GFR/board_info.txt deleted file mode 100644 index 7f883db..0000000 --- a/src/mainboard/adlink/cExpress-GFR/board_info.txt +++ /dev/null @@ -1,8 +0,0 @@ -Category: half -Board name: cExpress-GFR -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1132 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y -Clone of: lippert/toucan-af diff --git a/src/mainboard/lippert/Kconfig b/src/mainboard/lippert/Kconfig deleted file mode 100644 index e45fc3e..0000000 --- a/src/mainboard/lippert/Kconfig +++ /dev/null @@ -1,21 +0,0 @@ -if VENDOR_LIPPERT - -comment "was acquired by ADLINK" - -choice - prompt "Mainboard model" - -config LIPPERT_BOARDS_DISABLED - bool "Boards from vendor are disabled" - -source "src/mainboard/lippert/*/Kconfig.name" - -endchoice - -source "src/mainboard/lippert/*/Kconfig" - -config MAINBOARD_VENDOR - string - default "LiPPERT" - -endif # VENDOR_LIPPERT diff --git a/src/mainboard/lippert/Kconfig.name b/src/mainboard/lippert/Kconfig.name deleted file mode 100644 index 9a0c11c..0000000 --- a/src/mainboard/lippert/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_LIPPERT - bool "LiPPERT" diff --git a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c deleted file mode 100644 index 9ce9ec7..0000000 --- a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <AGESA.h> -#include <console/console.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <SB800.h> -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include <stdlib.h> - -/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess? - * - * Dedicated reset is not needed for the on-board Intel I210 GbE controller. - */ - -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported }, - {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, - {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/* Call the host environment interface to provide a user hook opportunity. */ -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr) -{ - MEM_DATA_STRUCT *MemData = ConfigPtr; - - printk(BIOS_INFO, "Setting DDR3 voltage: "); - FCH_IOMUX(184) = 2; // GPIO184: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V - switch (MemData->ParameterListPtr->DDR3Voltage) { - case VOLT1_25: // board is not able to provide this - MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry - printk(BIOS_INFO, "can't provide 1.25 V, using "); - // fall through - default: // AGESA.h says in mixed case 1.5V DIMMs get excluded - case VOLT1_35: - FCH_GPIO(184) = 0x08; // = output, disable PU, set to 0 - printk(BIOS_INFO, "1.35 V\n"); - break; - case VOLT1_5: - FCH_GPIO(184) = 0xC8; // = output, disable PU, set to 1 - printk(BIOS_INFO, "1.5 V\n"); - } - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig b/src/mainboard/lippert/frontrunner-af/Kconfig deleted file mode 100644 index 4a007bf..0000000 --- a/src/mainboard/lippert/frontrunner-af/Kconfig +++ /dev/null @@ -1,79 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -config BOARD_LIPPERT_FRONTRUNNER_AF - def_bool n - -if BOARD_LIPPERT_FRONTRUNNER_AF - -config BOARD_SPECIFIC_OPTIONS - def_bool y - #select ROMCC_BOOTBLOCK - select CPU_AMD_AGESA_FAMILY14 - select NORTHBRIDGE_AMD_AGESA_FAMILY14 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - # This erases 28 KB and writes 10 KB register dumps to SPI flash on every - # boot, wasting 3 s and causing wear! Therefore disable S3 for now. - #select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - -config MAINBOARD_DIR - string - default "lippert/frontrunner-af" - -config MAINBOARD_PART_NUMBER - string - default "FrontRunner-AF" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 2 - -config IRQ_SLOT_COUNT - int - default 11 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n - -#config VGA_BIOS_FILE -# string "VGA BIOS path and filename" -# depends on VGA_BIOS -# default "rom/video/OntarioGenericVbios.bin" - -config VGA_BIOS_ID - string - default "1002,9802" - -config SB800_AHCI_ROM - bool - default n - -endif # BOARD_LIPPERT_FRONTRUNNER_AF diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig.name b/src/mainboard/lippert/frontrunner-af/Kconfig.name deleted file mode 100644 index 1939264..0000000 --- a/src/mainboard/lippert/frontrunner-af/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -#config BOARD_LIPPERT_FRONTRUNNER_AF -# bool"FrontRunner-AF aka ADLINK CoreModule2-GF" diff --git a/src/mainboard/lippert/frontrunner-af/Makefile.inc b/src/mainboard/lippert/frontrunner-af/Makefile.inc deleted file mode 100644 index 3ea57cd..0000000 --- a/src/mainboard/lippert/frontrunner-af/Makefile.inc +++ /dev/null @@ -1,33 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -ifeq ($(CONFIG_AHCI_BIOS),y) -stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) -cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom -pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) -pci$(stripped_ahcibios_id).rom-type := optionrom -endif - -romstage-y += buildOpts.c -romstage-y += BiosCallOuts.c -romstage-y += OemCustomize.c - -ramstage-y += buildOpts.c -ramstage-y += BiosCallOuts.c -ramstage-y += OemCustomize.c - -# Minimal SEMA watchdog support -romstage-y += sema.c -ramstage-y += sema.c diff --git a/src/mainboard/lippert/frontrunner-af/OemCustomize.c b/src/mainboard/lippert/frontrunner-af/OemCustomize.c deleted file mode 100644 index 5010c63..0000000 --- a/src/mainboard/lippert/frontrunner-af/OemCustomize.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <AGESA.h> -#include <PlatformMemoryConfiguration.h> - -#include <northbridge/amd/agesa/state_machine.h> - -static const PCIe_PORT_DESCRIPTOR PortList[] = { - // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 4, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER(PortDisabled, ChannelTypeExt6db, 5, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER(PortDisabled, ChannelTypeExt6db, 6, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER(PortDisabled, ChannelTypeExt6db, 7, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 8, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - } -}; - -static const PCIe_DDI_DESCRIPTOR DdiList[] = { - // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeTravisDpToLvds, Aux1, Hdp1) - }, - // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeDP, Aux2, Hdp2) - } -}; - -static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList, -}; - -void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly) -{ - InitEarly->GnbConfig.PcieComplexList = &PcieComplex; - InitEarly->GnbConfig.PsppPolicy = 0; -} - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = { - HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), - NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 1), - PSO_END -}; - -void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost) -{ - InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable; -} diff --git a/src/mainboard/lippert/frontrunner-af/OptionsIds.h b/src/mainboard/lippert/frontrunner-af/OptionsIds.h deleted file mode 100644 index 2d8381b..0000000 --- a/src/mainboard/lippert/frontrunner-af/OptionsIds.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_ASSERT_ENABLED TRUE - -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl deleted file mode 100644 index 985cac0..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl +++ /dev/null @@ -1,408 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - Package(){0x0003FFFF, 1, 0, 16 }, - Package(){0x0003FFFF, 2, 0, 17 }, - Package(){0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - Package(){0x0005FFFF, 1, 0, 18 }, - Package(){0x0005FFFF, 2, 0, 19 }, - Package(){0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - Package(){0x0006FFFF, 1, 0, 19 }, - Package(){0x0006FFFF, 2, 0, 16 }, - Package(){0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - Package(){0x0007FFFF, 1, 0, 16 }, - Package(){0x0007FFFF, 2, 0, 17 }, - Package(){0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - Package(){0x0009FFFF, 1, 0, 16 }, - Package(){0x0009FFFF, 2, 0, 17 }, - Package(){0x0009FFFF, 3, 0, 18 }, - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - Package(){0x000AFFFF, 1, 0, 16 }, - Package(){0x000AFFFF, 2, 0, 17 }, - Package(){0x000AFFFF, 3, 0, 18 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2, slot 3 behind Dev14, Fun4. */ - Package(){0x0004FFFF, 0, 0, 0x14 }, - Package(){0x0004FFFF, 1, 0, 0x15 }, - Package(){0x0004FFFF, 2, 0, 0x16 }, - Package(){0x0004FFFF, 3, 0, 0x17 }, - Package(){0x0005FFFF, 0, 0, 0x15 }, - Package(){0x0005FFFF, 1, 0, 0x16 }, - Package(){0x0005FFFF, 2, 0, 0x17 }, - Package(){0x0005FFFF, 3, 0, 0x14 }, - Package(){0x0006FFFF, 0, 0, 0x16 }, - Package(){0x0006FFFF, 1, 0, 0x17 }, - Package(){0x0006FFFF, 2, 0, 0x14 }, - Package(){0x0006FFFF, 3, 0, 0x15 }, - Package(){0x0007FFFF, 0, 0, 0x17 }, - Package(){0x0007FFFF, 1, 0, 0x14 }, - Package(){0x0007FFFF, 2, 0, 0x15 }, - Package(){0x0007FFFF, 3, 0, 0x16 }, - }) -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi/sata.asl b/src/mainboard/lippert/frontrunner-af/acpi/sata.asl deleted file mode 100644 index 9e0e535..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi/superio.asl b/src/mainboard/lippert/frontrunner-af/acpi/superio.asl deleted file mode 100644 index 57ef408..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/superio.asl +++ /dev/null @@ -1,35 +0,0 @@ -/* - * SuperI/O devices - * - * This file is part of the coreboot project. - * - * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH - * (Written by Jens Rottmann JRottmann@LiPPERTembedded.de for LiPPERT) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* PS/2 Keyboard */ -Device(KBC) { - Name(_HID, EISAID("PNP0303")) - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0060, 0x0060, 1, 1) - IO(Decode16, 0x0064, 0x0064, 1, 1) - IRQNoFlags(){1} - }) -} - -/* PS/2 Mouse */ -Device(PS2M) { - Name(_HID, EISAID("PNP0F13")) - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){12} - }) -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi/usb.asl b/src/mainboard/lippert/frontrunner-af/acpi/usb.asl deleted file mode 100644 index cd76bf1..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/usb.asl +++ /dev/null @@ -1,158 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi_tables.c b/src/mainboard/lippert/frontrunner-af/acpi_tables.c deleted file mode 100644 index 97ea649..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi_tables.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/acpi.h> -#include <arch/ioapic.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/lippert/frontrunner-af/board_info.txt b/src/mainboard/lippert/frontrunner-af/board_info.txt deleted file mode 100644 index 9246cdb..0000000 --- a/src/mainboard/lippert/frontrunner-af/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1277 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/lippert/frontrunner-af/buildOpts.c b/src/mainboard/lippert/frontrunner-af/buildOpts.c deleted file mode 100644 index 0563243..0000000 --- a/src/mainboard/lippert/frontrunner-af/buildOpts.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - */ - -#include <stdlib.h> - - - -/* Select the CPU family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT TRUE -#define INSTALL_FAMILY_15_SUPPORT FALSE - -/* Select the CPU socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP1_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT TRUE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE -#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE - -#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE -#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE - -#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_ECC_SUPPORT FALSE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE -#define BLDOPT_REMOVE_DQS_TRAINING FALSE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ACPI_PSTATES FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE - #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE -#define BLDOPT_REMOVE_SRAT FALSE -#define BLDOPT_REMOVE_SLIT FALSE -#define BLDOPT_REMOVE_WHEA FALSE -#define BLDOPT_REMOVE_DMI TRUE -#define BLDOPT_REMOVE_HT_ASSIST TRUE -#define BLDOPT_REMOVE_ATM_MODE TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE -//#define BLDOPT_REMOVE_C6_STATE TRUE -#define BLDOPT_REMOVE_GFX_RECOVERY TRUE -#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE - - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -#define BLDCFG_VRM_CURRENT_LIMIT 24000 -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 -#define BLDCFG_VRM_SLEW_RATE 5000 -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 -//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 - -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE -#define BLDCFG_PLAT_NUM_IO_APICS 3 -//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled -//#define BLDCFG_PLATFORM_C1E_OPDATA 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -//#define BLDCFG_STARTING_BUSNUM 0 -//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 -//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 -//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 -//#define BLDCFG_BUID_SWAP_LIST 0 -//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 -//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 -//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 -//#define BLDCFG_BUS_NUMBERS_LIST 0 -//#define BLDCFG_IGNORE_LINK_LIST 0 -//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 -//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 -//#define BLDCFG_USE_HT_ASSIST TRUE -//#define BLDCFG_USE_ATM_MODE TRUE -//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm -#define BLDCFG_S3_LATE_RESTORE TRUE -//#define BLDCFG_USE_32_BYTE_REFRESH FALSE -//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance -//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE -//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 -#define BLDCFG_CFG_GNB_HD_AUDIO FALSE -//#define BLDCFG_CFG_ABM_SUPPORT FALSE -//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 -//#define BLDCFG_MEM_INIT_PSTATE 0 -//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -//#define BLDCFG_ONLINE_SPARE FALSE -//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -//#define BLDCFG_ENABLE_ECC_FEATURE TRUE -//#define BLDCFG_ECC_REDIRECTION FALSE -//#define BLDCFG_SCRUB_DRAM_RATE 0 -//#define BLDCFG_SCRUB_L2_RATE 0 -//#define BLDCFG_SCRUB_L3_RATE 0 -//#define BLDCFG_SCRUB_IC_RATE 0 -//#define BLDCFG_SCRUB_DC_RATE 0 -//#define BLDCFG_ECC_SYNC_FLOOD 0 -//#define BLDCFG_ECC_SYMBOL_SIZE 0 -//#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_UMA_ALLOCATION_SIZE 0 -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 - -/* - * Agesa configuration values selection. - * Uncomment and specify the value for the configuration options - * needed by the system. - */ -#include <AGESA.h> - -/* The fixed MTRR values to be set after memory initialization. */ -CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, - { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, - { CPU_LIST_TERMINAL } -}; - -/* Include the files that instantiate the configuration definitions. */ - -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - -/***************************************************************************** - * Define the RELEASE VERSION string - * - * The Release Version string should identify the next planned release. - * When a branch is made in preparation for a release, the release manager - * should change/confirm that the branch version of this file contains the - * string matching the desired version for the release. The trunk version of - * the file should always contain a trailing 'X'. This will make sure that a - * development build from trunk will not be confused for a released version. - * The release manager will need to remove the trailing 'X' and update the - * version string as appropriate for the release. The trunk copy of this file - * should also be updated/incremented for the next expected version, + trailing 'X' - ****************************************************************************/ -// This is the delivery package title, "BrazosPI" -// This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - -// This is the release version number of the AGESA component -// This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -// Instantiate all solution relevant data. -#include <PlatformInstall.h> diff --git a/src/mainboard/lippert/frontrunner-af/cmos.layout b/src/mainboard/lippert/frontrunner-af/cmos.layout deleted file mode 100644 index f9f52f7..0000000 --- a/src/mainboard/lippert/frontrunner-af/cmos.layout +++ /dev/null @@ -1,68 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -#***************************************************************************** - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb deleted file mode 100644 index 0f89d25..0000000 --- a/src/mainboard/lippert/frontrunner-af/devicetree.cb +++ /dev/null @@ -1,102 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -chip northbridge/amd/agesa/family14/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] - device pci 4.0 on end # PCIE P2P bridge on-board NIC - device pci 5.0 off end # PCIE P2P bridge - device pci 6.0 off end # PCIE P2P bridge - device pci 7.0 off end # PCIE P2P bridge - device pci 8.0 off end # NB/SB Link P2P bridge - end # agesa northbridge - - chip southbridge/amd/cimx/sb800 - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/smsc/smscsuperio - device pnp 4e.0 off end # Floppy - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.7 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 4e.A on # Runtime Regs - io 0x60 = 0x0E00 - drq 0xF0 = 0x0B # no 32kHz - end - end # smscsuperio - end #LPC - - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 off end # OHCI FS/LS USB - device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 off end # PCIe PortA - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 - - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 - - chip northbridge/amd/agesa/family14 - - # These seem unnecessary - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - device pci 18.6 on end - device pci 18.7 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end # agesa northbridge - - end #domain -end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/lippert/frontrunner-af/dsdt.asl b/src/mainboard/lippert/frontrunner-af/dsdt.asl deleted file mode 100644 index 07b5071..0000000 --- a/src/mainboard/lippert/frontrunner-af/dsdt.asl +++ /dev/null @@ -1,1642 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* DefinitionBlock Statement */ -#include <arch/acpi.h> -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - OEM_ID, - ACPI_TABLE_CREATOR, - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/i386/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Device (C000) { - Name (_HID, "ACPI0007") - Name (_UID, 0) - } - Device (C001) { - Name (_HID, "ACPI0007") - Name (_UID, 1) - } - Device (C002) { - Name (_HID, "ACPI0007") - Name (_UID, 2) - } - Device (C003) { - Name (_HID, "ACPI0007") - Name (_UID, 3) - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if (DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */ - Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */ - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - - /* Operating System Capabilities Method */ - Method (_OSC, 4) - { - /* Check for PCI/PCI-X/PCIe GUID */ - If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) - { - /* Let OS control everything */ - Return (Arg3) - } - Else - { - /* Unrecognized UUID, so set bit 2 of Arg3 to 1 */ - CreateDWordField (Arg3, 0, CDW1) - Or (CDW1, 4, CDW1) - Return (Arg3) - } - } /* End _OSC */ - - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBX) - Store(HPBA, HPBX) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - #include "acpi/superio.asl" - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - /* Set the Bus number and Secondary Bus number for the PCI0 device - * The Secondary bus range for PCI0 lets the system - * know what bus values are allowed on the downstream - * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which - * range from [0-0xFF] but they do not need to be - * sequential. - */ - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x00FF, /* range maximum */ - 0x0000, /* translation */ - 0x0100, /* length */ - ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ - - IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ - IO(Decode16, 0x0E00, 0x0E00, 1, 0x80) /* SIO runtime regs */ - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ -#if 0 - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -} -/* End of ASL file */ diff --git a/src/mainboard/lippert/frontrunner-af/irq_tables.c b/src/mainboard/lippert/frontrunner-af/irq_tables.c deleted file mode 100644 index a066864..0000000 --- a/src/mainboard/lippert/frontrunner-af/irq_tables.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c deleted file mode 100644 index 6ad5234..0000000 --- a/src/mainboard/lippert/frontrunner-af/mainboard.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdlib.h> -#include <amdblocks/acpimmio.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/mmio.h> -#include <device/pci_ops.h> -#include <device/pci_def.h> -#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> -#include <vendorcode/amd/cimx/sb800/OEM.h> /* SMBUS0_BASE_ADDRESS */ -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include "sema.h" - -/* Init SIO GPIOs. */ -#define SIO_RUNTIME_BASE 0x0E00 -static const u16 sio_init_table[] = { // hi = offset, lo = value - 0x4BA0, // GP1x: COM1/2 control = RS232, no term, max 115200 - 0x2300, // GP10: COM1 termination = push/pull output - 0x2400, // GP11: COM2 termination = push/pull output - 0x2500, // GP12: COM1 RS485 mode = push/pull output - 0x2600, // GP13: COM2 RS485 mode = push/pull output - 0x2700, // GP14: COM1 speed A = push/pull output - 0x2900, // GP15: COM1 speed B = push/pull output - 0x2A00, // GP16: COM2 speed A = push/pull output - 0x2B00, // GP17: COM2 speed B = push/pull output - - 0x3904, // GP36 = KBDRST# function - - 0x4E74, // GP4x: Ethernet enable = on - 0x6E84, // GP44: Ethernet enable = open drain output - - // GP5x = COM2 function instead of GPIO - 0x3F05, 0x4005, 0x4105, 0x4204, 0x4305, 0x4404, 0x4505, 0x4604, - - 0x470C, // GP60 = WDT function - 0x5E00, // LED2: Live LED = off - 0x4884, // GP61: Live LED = LED2 function - - 0x5038, // GP6x: USB power = 3x on - 0x5580, // GP63: USB power 0/1 = open drain output - 0x5680, // GP64: USB power 2/3 = open drain output - 0x5780, // GP65: USB power 4/5 = open drain output -}; - -static void init(struct device *dev) -{ - volatile u8 *spi_base; // base addr of Hudson's SPI host controller - int i; - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); - - /* Init Hudson GPIOs. */ - printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); - FCH_IOMUX(50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices - FCH_GPIO (50) = 0xC0; // = output set to 1 as it's never needed - FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU) - FCH_IOMUX(56) = 1; // GPIO58-56: REV_ID2-0 - FCH_GPIO (56) = 0x28; // = inputs, disable int. pull-ups - FCH_IOMUX(57) = 1; - FCH_GPIO (57) = 0x28; - FCH_IOMUX(58) = 1; - FCH_GPIO (58) = 0x28; - FCH_IOMUX(96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU) - FCH_IOMUX(52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector - FCH_IOMUX(61) = 2; // default to inputs with int. PU - FCH_IOMUX(62) = 2; - FCH_IOMUX(187) = 2; - FCH_IOMUX(188) = 2; - FCH_IOMUX(189) = 1; - FCH_IOMUX(190) = 1; - FCH_IOMUX(191) = 1; - FCH_IOMUX(192) = 1; - if (!fch_gpio_state(197)) // just in case anyone cares - printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); - printk(BIOS_INFO, "Board revision ID: %u\n", - fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); - - /* Init SIO GPIOs. */ - printk(BIOS_DEBUG, "Init SIO GPIOs @ 0x%04x\n", SIO_RUNTIME_BASE); - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 val = sio_init_table[i]; - outb((u8)val, SIO_RUNTIME_BASE + (val >> 8)); - } - - /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ - spi_base = (u8 *)((uintptr_t)pci_read_config32(pcidev_on_root(0x14, 3), - 0xA0) & 0xFFFFFFE0); - spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register - - /* Notify the SMC we're alive and kicking, or after a while it will - * effect a power cycle and switch to the alternate BIOS chip. - * Should be done as late as possible. - * Failure here does not matter if watchdog was already disabled, - * by configuration or previous boot, so ignore return value. - */ - sema_send_alive(); - - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); -} - -/********************************************** - * Enable the dedicated functions of the board. - **********************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - dev->ops->init = init; - - /* enable GPP CLK0 */ - /* disable GPP CLK1 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0x0F); - write8(misc_mem_clk_cntrl + 1, 0x00); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); - - /* - * Initialize ASF registers to an arbitrary address because someone - * long ago set things up this way inside the SPD read code. The - * SPD read code has been made generic and moved out of the board - * directory, so the ASF init is being done here. - */ - pm_write8(0x29, 0x80); - pm_write8(0x28, 0x61); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/frontrunner-af/mptable.c b/src/mainboard/lippert/frontrunner-af/mptable.c deleted file mode 100644 index 347b781..0000000 --- a/src/mainboard/lippert/frontrunner-af/mptable.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); - - u8 byte; - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* Southbridge HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - struct device *dev = pcidev_on_root(0x14, 4); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/lippert/frontrunner-af/platform_cfg.h b/src/mainboard/lippert/frontrunner-af/platform_cfg.h deleted file mode 100644 index c64ad04..0000000 --- a/src/mainboard/lippert/frontrunner-af/platform_cfg.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE - * BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x3F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#define AZALIA_SDIN_PIN 0x02 - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_DISABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GPP_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 1 - -static const CODECENTRY frontrunneraf_codec_alc886[] = /* Realtek ALC886/8 */ -{ - /* NID, PinConfig (Verbs 71F..C) */ - {0x11, 0x411111F0}, /* NPC */ - {0x12, 0x411111F0}, /* DMIC */ - {0x14, 0x01214110}, /* FRONT (Port-D) */ - {0x15, 0x01011112}, /* SURR (Port-A) */ - {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ - {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ - {0x18, 0x01A19930}, /* MIC1 (Port-B) */ - {0x19, 0x411111F0}, /* MIC2 (Port-F) */ - {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ - {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ - {0x1C, 0x411111F0}, /* CD-IN */ - {0x1D, 0x40132601}, /* BEEP-IN */ - {0x1E, 0x01441120}, /* S/PDIF-OUT */ - {0x1F, 0x01C46140}, /* S/PDIF-IN */ - {0xff, 0xffffffff} /* end of table */ -}; - -static const CODECTBLLIST codec_tablelist[] = -{ - {0x10ec0888, (CODECENTRY*)&frontrunneraf_codec_alc886[0]}, - {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} -}; - -/** - * @def AZALIA_OEM_VERB_TABLE - * Mainboard specific codec verb table list - */ -#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) - -/* set up an ACPI preferred power management profile */ -/* from acpi.h - * PM_UNSPECIFIED = 0, - * PM_DESKTOP = 1, - * PM_MOBILE = 2, - * PM_WORKSTATION = 3, - * PM_ENTERPRISE_SERVER = 4, - * PM_SOHO_SERVER = 5, - * PM_APPLIANCE_PC = 6, - * PM_PERFORMANCE_SERVER = 7, - * PM_TABLET = 8 - */ -#define FADT_PM_PROFILE 1 - -#endif diff --git a/src/mainboard/lippert/frontrunner-af/romstage.c b/src/mainboard/lippert/frontrunner-af/romstage.c deleted file mode 100644 index f8e6091..0000000 --- a/src/mainboard/lippert/frontrunner-af/romstage.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <northbridge/amd/agesa/state_machine.h> -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include <sb_cimx.h> - -#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1) - -void board_BeforeAgesa(struct sysinfo *cb) -{ - sb_Poweron_Init(); - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); -} diff --git a/src/mainboard/lippert/frontrunner-af/sema.c b/src/mainboard/lippert/frontrunner-af/sema.c deleted file mode 100644 index 757d8da..0000000 --- a/src/mainboard/lippert/frontrunner-af/sema.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdlib.h> -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <delay.h> -#include <OEM.h> /* SMBUS0_BASE_ADDRESS */ - -#include <Porting.h> -#include <AGESA.h> -#include <northbridge/amd/agesa/dimmSpd.h> -#include "sema.h" - -/* Write data block to slave on SMBUS0. */ -#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) -#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) -#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) -#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) -#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) -#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) - -static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) -{ - __outbyte(SMB0_STATUS, 0x1E); // clear error status - __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction = out - __outbyte(SMB0_HOSTCMD, command); // or destination offset - __outbyte(SMB0_DATA0, length); // sent before data - __inbyte(SMB0_CONTROL); // reset block data array - while (length--) - __outbyte(SMB0_BLOCKDATA, *(data++)); - __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ - - while (__inbyte(SMB0_STATUS) == 0x01); // busy, no errors - return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors -} - -#define RETRY_COUNT 100 - -/* Use of mdelay() here would fail in romstage. */ -static void early_mdelay(int msecs) -{ - while (msecs--) { - int i; - for (i = 0; i < 1000; i++) - inb(0x80); - } -} - -int sema_send_alive(void) -{ - const u8 i_am_alive[] = { 0x03 }; - int i, j = 0; - char one_spd_byte; - - /* Fake read just to setup SMBUS controller. */ - if (ENV_ROMSTAGE) - smbus_readSpd(0xa0, &one_spd_byte, 1); - - /* Notify the SMC we're alive and kicking, or after a while it will - * effect a power cycle and switch to the alternate BIOS chip. - * Should be done as late as possible. */ - - printk(BIOS_CRIT, "Sending BIOS alive message... "); - - do { - i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive); - early_mdelay(25); - } while ((++j < RETRY_COUNT) && i); - - if (j == RETRY_COUNT) { - printk(BIOS_INFO, "failed\n"); - return -1; - } - printk(BIOS_CRIT, "took %d tries\n", j); - - return 0; -} diff --git a/src/mainboard/lippert/frontrunner-af/sema.h b/src/mainboard/lippert/frontrunner-af/sema.h deleted file mode 100644 index ea8ee31..0000000 --- a/src/mainboard/lippert/frontrunner-af/sema.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __LIPPERT_SEMA_H__ -#define __LIPPERT_SEMA_H__ - -/* Signal SEMA watchdog a successful boot. - * Returns < 0 is SMBus message failed after - * several retries. - */ -int sema_send_alive(void); - -#endif diff --git a/src/mainboard/lippert/toucan-af/BiosCallOuts.c b/src/mainboard/lippert/toucan-af/BiosCallOuts.c deleted file mode 100644 index 7e6d0c4..0000000 --- a/src/mainboard/lippert/toucan-af/BiosCallOuts.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <AGESA.h> -#include <console/console.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <SB800.h> -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include <stdlib.h> - -/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess? - * - * COM Express doesn't provide dedicated resets for individual lanes - * and it's not needed for the on-board Intel I210 GbE controller. - */ - -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported }, - {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit}, - {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/* Call the host environment interface to provide a user hook opportunity. */ -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr) -{ - MEM_DATA_STRUCT *MemData = ConfigPtr; - - printk(BIOS_INFO, "Setting DDR3 voltage: "); - FCH_IOMUX(65) = 1; // GPIO65: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V - switch (MemData->ParameterListPtr->DDR3Voltage) { - case VOLT1_25: // board is not able to provide this - MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry - printk(BIOS_INFO, "can't provide 1.25 V, using "); - // fall through - default: // AGESA.h says in mixed case 1.5V DIMMs get excluded - case VOLT1_35: - FCH_GPIO(65) = 0x08; // = output, disable PU, set to 0 - printk(BIOS_INFO, "1.35 V\n"); - break; - case VOLT1_5: - FCH_GPIO(65) = 0xC8; // = output, disable PU, set to 1 - printk(BIOS_INFO, "1.5 V\n"); - } - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/lippert/toucan-af/Kconfig b/src/mainboard/lippert/toucan-af/Kconfig deleted file mode 100644 index b62da2e..0000000 --- a/src/mainboard/lippert/toucan-af/Kconfig +++ /dev/null @@ -1,81 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -config BOARD_LIPPERT_TOUCAN_AF - def_bool n - -if BOARD_LIPPERT_TOUCAN_AF - -config BOARD_SPECIFIC_OPTIONS - def_bool y - #select ROMCC_BOOTBLOCK - select CPU_AMD_AGESA_FAMILY14 - select NORTHBRIDGE_AMD_AGESA_FAMILY14 - select SOUTHBRIDGE_AMD_CIMX_SB800 - # The Toucan-AF is meant to work on any COM Express Type 6 baseboard. - # The ADLINK ExpressBase-6 baseboard happens to use this SIO: - select SUPERIO_WINBOND_W83627DHG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - # This erases 28 KB and writes 10 KB register dumps to SPI flash on every - # boot, wasting 3 s and causing wear! Therefore disable S3 for now. - #select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - -config MAINBOARD_DIR - string - default "lippert/toucan-af" - -config MAINBOARD_PART_NUMBER - string - default "Toucan-AF" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 2 - -config IRQ_SLOT_COUNT - int - default 11 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n - -#config VGA_BIOS_FILE -# string "VGA BIOS path and filename" -# depends on VGA_BIOS -# default "rom/video/OntarioGenericVbios.bin" - -config VGA_BIOS_ID - string - default "1002,9802" - -config SB800_AHCI_ROM - bool - default n - -endif # BOARD_LIPPERT_TOUCAN_AF diff --git a/src/mainboard/lippert/toucan-af/Kconfig.name b/src/mainboard/lippert/toucan-af/Kconfig.name deleted file mode 100644 index 6eceb51..0000000 --- a/src/mainboard/lippert/toucan-af/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -#config BOARD_LIPPERT_TOUCAN_AF -# bool"Toucan-AF aka cExpress-GFR (+W83627DHG SIO)" diff --git a/src/mainboard/lippert/toucan-af/Makefile.inc b/src/mainboard/lippert/toucan-af/Makefile.inc deleted file mode 100644 index 1080c64..0000000 --- a/src/mainboard/lippert/toucan-af/Makefile.inc +++ /dev/null @@ -1,33 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -ifeq ($(CONFIG_AHCI_BIOS),y) -stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) -cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom -pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) -pci$(stripped_ahcibios_id).rom-type := optionrom -endif - -romstage-y += buildOpts.c -romstage-y += BiosCallOuts.c -romstage-y += OemCustomize.c - -ramstage-y += buildOpts.c -ramstage-y += BiosCallOuts.c -ramstage-y += OemCustomize.c - -# Minimal SEMA watchdog support -romstage-y += ../frontrunner-af/sema.c -ramstage-y += ../frontrunner-af/sema.c diff --git a/src/mainboard/lippert/toucan-af/OemCustomize.c b/src/mainboard/lippert/toucan-af/OemCustomize.c deleted file mode 100644 index 22addb5..0000000 --- a/src/mainboard/lippert/toucan-af/OemCustomize.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <AGESA.h> -#include <PlatformMemoryConfiguration.h> - -#include <northbridge/amd/agesa/state_machine.h> - -static const PCIe_PORT_DESCRIPTOR PortList[] = { - // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 4, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 5, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 6, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 7, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 8, - HotplugDisabled, - PcieGen2, - PcieGen2, - AspmL0sL1, 0) - } -}; - -static const PCIe_DDI_DESCRIPTOR DdiList[] = { - // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeAutoDetect, Aux1, Hdp1) - }, - // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER(ConnectorTypeAutoDetect, Aux2, Hdp2) - } -}; - -static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList, -}; - -void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly) -{ - InitEarly->GnbConfig.PcieComplexList = &PcieComplex; - InitEarly->GnbConfig.PsppPolicy = 0; -} - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = { - HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), - NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 1), - PSO_END -}; - -void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost) -{ - InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable; -} diff --git a/src/mainboard/lippert/toucan-af/OptionsIds.h b/src/mainboard/lippert/toucan-af/OptionsIds.h deleted file mode 100644 index 2d8381b..0000000 --- a/src/mainboard/lippert/toucan-af/OptionsIds.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_ASSERT_ENABLED TRUE - -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/lippert/toucan-af/acpi/routing.asl b/src/mainboard/lippert/toucan-af/acpi/routing.asl deleted file mode 100644 index 997843d..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/routing.asl +++ /dev/null @@ -1,404 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - Package(){0x0003FFFF, 1, 0, 16 }, - Package(){0x0003FFFF, 2, 0, 17 }, - Package(){0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - Package(){0x0005FFFF, 1, 0, 18 }, - Package(){0x0005FFFF, 2, 0, 19 }, - Package(){0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - Package(){0x0006FFFF, 1, 0, 19 }, - Package(){0x0006FFFF, 2, 0, 16 }, - Package(){0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - Package(){0x0007FFFF, 1, 0, 16 }, - Package(){0x0007FFFF, 2, 0, 17 }, - Package(){0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - Package(){0x0009FFFF, 1, 0, 16 }, - Package(){0x0009FFFF, 2, 0, 17 }, - Package(){0x0009FFFF, 3, 0, 18 }, - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - Package(){0x000AFFFF, 1, 0, 16 }, - Package(){0x000AFFFF, 2, 0, 17 }, - Package(){0x000AFFFF, 3, 0, 18 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0003FFFF, 0, 0, 0x14 }, - Package(){0x0003FFFF, 1, 0, 0x15 }, - Package(){0x0003FFFF, 2, 0, 0x16 }, - Package(){0x0003FFFF, 3, 0, 0x17 }, - Package(){0x0004FFFF, 0, 0, 0x15 }, - Package(){0x0004FFFF, 1, 0, 0x16 }, - Package(){0x0004FFFF, 2, 0, 0x17 }, - Package(){0x0004FFFF, 3, 0, 0x14 }, - Package(){0x0005FFFF, 0, 0, 0x16 }, - Package(){0x0005FFFF, 1, 0, 0x17 }, - Package(){0x0005FFFF, 2, 0, 0x14 }, - Package(){0x0005FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/lippert/toucan-af/acpi/sata.asl b/src/mainboard/lippert/toucan-af/acpi/sata.asl deleted file mode 100644 index 9e0e535..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/lippert/toucan-af/acpi/superio.asl b/src/mainboard/lippert/toucan-af/acpi/superio.asl deleted file mode 100644 index 57ef408..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/superio.asl +++ /dev/null @@ -1,35 +0,0 @@ -/* - * SuperI/O devices - * - * This file is part of the coreboot project. - * - * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH - * (Written by Jens Rottmann JRottmann@LiPPERTembedded.de for LiPPERT) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* PS/2 Keyboard */ -Device(KBC) { - Name(_HID, EISAID("PNP0303")) - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0060, 0x0060, 1, 1) - IO(Decode16, 0x0064, 0x0064, 1, 1) - IRQNoFlags(){1} - }) -} - -/* PS/2 Mouse */ -Device(PS2M) { - Name(_HID, EISAID("PNP0F13")) - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){12} - }) -} diff --git a/src/mainboard/lippert/toucan-af/acpi/usb.asl b/src/mainboard/lippert/toucan-af/acpi/usb.asl deleted file mode 100644 index cd76bf1..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/usb.asl +++ /dev/null @@ -1,158 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -#include <arch/acpi.h> -DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/lippert/toucan-af/acpi_tables.c b/src/mainboard/lippert/toucan-af/acpi_tables.c deleted file mode 100644 index 97ea649..0000000 --- a/src/mainboard/lippert/toucan-af/acpi_tables.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/acpi.h> -#include <arch/ioapic.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/lippert/toucan-af/board_info.txt b/src/mainboard/lippert/toucan-af/board_info.txt deleted file mode 100644 index 77acfae..0000000 --- a/src/mainboard/lippert/toucan-af/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1132 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/lippert/toucan-af/buildOpts.c b/src/mainboard/lippert/toucan-af/buildOpts.c deleted file mode 100644 index 0563243..0000000 --- a/src/mainboard/lippert/toucan-af/buildOpts.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - */ - -#include <stdlib.h> - - - -/* Select the CPU family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT TRUE -#define INSTALL_FAMILY_15_SUPPORT FALSE - -/* Select the CPU socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP1_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT TRUE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE -#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE - -#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE -#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE - -#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_ECC_SUPPORT FALSE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE -#define BLDOPT_REMOVE_DQS_TRAINING FALSE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ACPI_PSTATES FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE - #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE -#define BLDOPT_REMOVE_SRAT FALSE -#define BLDOPT_REMOVE_SLIT FALSE -#define BLDOPT_REMOVE_WHEA FALSE -#define BLDOPT_REMOVE_DMI TRUE -#define BLDOPT_REMOVE_HT_ASSIST TRUE -#define BLDOPT_REMOVE_ATM_MODE TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE -//#define BLDOPT_REMOVE_C6_STATE TRUE -#define BLDOPT_REMOVE_GFX_RECOVERY TRUE -#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE - - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -#define BLDCFG_VRM_CURRENT_LIMIT 24000 -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 -#define BLDCFG_VRM_SLEW_RATE 5000 -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 -//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 - -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE -#define BLDCFG_PLAT_NUM_IO_APICS 3 -//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled -//#define BLDCFG_PLATFORM_C1E_OPDATA 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -//#define BLDCFG_STARTING_BUSNUM 0 -//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 -//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 -//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 -//#define BLDCFG_BUID_SWAP_LIST 0 -//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 -//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 -//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 -//#define BLDCFG_BUS_NUMBERS_LIST 0 -//#define BLDCFG_IGNORE_LINK_LIST 0 -//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 -//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 -//#define BLDCFG_USE_HT_ASSIST TRUE -//#define BLDCFG_USE_ATM_MODE TRUE -//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm -#define BLDCFG_S3_LATE_RESTORE TRUE -//#define BLDCFG_USE_32_BYTE_REFRESH FALSE -//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance -//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE -//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 -#define BLDCFG_CFG_GNB_HD_AUDIO FALSE -//#define BLDCFG_CFG_ABM_SUPPORT FALSE -//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 -//#define BLDCFG_MEM_INIT_PSTATE 0 -//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -//#define BLDCFG_ONLINE_SPARE FALSE -//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -//#define BLDCFG_ENABLE_ECC_FEATURE TRUE -//#define BLDCFG_ECC_REDIRECTION FALSE -//#define BLDCFG_SCRUB_DRAM_RATE 0 -//#define BLDCFG_SCRUB_L2_RATE 0 -//#define BLDCFG_SCRUB_L3_RATE 0 -//#define BLDCFG_SCRUB_IC_RATE 0 -//#define BLDCFG_SCRUB_DC_RATE 0 -//#define BLDCFG_ECC_SYNC_FLOOD 0 -//#define BLDCFG_ECC_SYMBOL_SIZE 0 -//#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_UMA_ALLOCATION_SIZE 0 -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 - -/* - * Agesa configuration values selection. - * Uncomment and specify the value for the configuration options - * needed by the system. - */ -#include <AGESA.h> - -/* The fixed MTRR values to be set after memory initialization. */ -CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, - { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, - { CPU_LIST_TERMINAL } -}; - -/* Include the files that instantiate the configuration definitions. */ - -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - -/***************************************************************************** - * Define the RELEASE VERSION string - * - * The Release Version string should identify the next planned release. - * When a branch is made in preparation for a release, the release manager - * should change/confirm that the branch version of this file contains the - * string matching the desired version for the release. The trunk version of - * the file should always contain a trailing 'X'. This will make sure that a - * development build from trunk will not be confused for a released version. - * The release manager will need to remove the trailing 'X' and update the - * version string as appropriate for the release. The trunk copy of this file - * should also be updated/incremented for the next expected version, + trailing 'X' - ****************************************************************************/ -// This is the delivery package title, "BrazosPI" -// This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - -// This is the release version number of the AGESA component -// This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -// Instantiate all solution relevant data. -#include <PlatformInstall.h> diff --git a/src/mainboard/lippert/toucan-af/cmos.layout b/src/mainboard/lippert/toucan-af/cmos.layout deleted file mode 100644 index f9f52f7..0000000 --- a/src/mainboard/lippert/toucan-af/cmos.layout +++ /dev/null @@ -1,68 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -#***************************************************************************** - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb deleted file mode 100644 index ce05afc..0000000 --- a/src/mainboard/lippert/toucan-af/devicetree.cb +++ /dev/null @@ -1,105 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -chip northbridge/amd/agesa/family14/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] - #device pci 1.1 on end # Internal HDMI Audio - device pci 4.0 on end # PCIE P2P bridge - device pci 5.0 on end # PCIE P2P bridge - device pci 6.0 on end # PCIE P2P bridge - device pci 7.0 on end # PCIE P2P bridge on-board NIC - device pci 8.0 off end # NB/SB Link P2P bridge - end # agesa northbridge - - chip southbridge/amd/cimx/sb800 - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/winbond/w83627dhg - device pnp 4e.0 off end # Floppy - device pnp 4e.1 off end # Parallel Port - device pnp 4e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # Keyboard, Mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - #device pnp 4e.6 off end # SPI - device pnp 4e.307 off end # GPIO6 - device pnp 4e.8 off end # WDTO, PLED - device pnp 4e.009 off end # GPIO2 - device pnp 4e.109 off end # GPIO3 - device pnp 4e.209 off end # GPIO4 - device pnp 4e.309 off end # GPIO5 - device pnp 4e.A off end # ACPI - device pnp 4e.B off end # HW Monitor - end # w83627dhg - end #LPC - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 off end # OHCI FS/LS USB - device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA - device pci 15.1 on end # PCIe PortB - device pci 15.2 on end # PCIe PortC - device pci 15.3 on end # PCIe PortD - device pci 16.0 off end # OHCI USB 10-13 - device pci 16.2 off end # EHCI USB 10-13 - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 - - chip northbridge/amd/agesa/family14 - - # These seem unnecessary - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - device pci 18.6 on end - device pci 18.7 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - end # agesa northbridge - - end #domain -end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/lippert/toucan-af/dsdt.asl b/src/mainboard/lippert/toucan-af/dsdt.asl deleted file mode 100644 index 347f1a1..0000000 --- a/src/mainboard/lippert/toucan-af/dsdt.asl +++ /dev/null @@ -1,1640 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* DefinitionBlock Statement */ -#include <arch/acpi.h> -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - OEM_ID, - ACPI_TABLE_CREATOR, - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/i386/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Device (C000) { - Name (_HID, "ACPI0007") - Name (_UID, 0) - } - Device (C001) { - Name (_HID, "ACPI0007") - Name (_UID, 1) - } - Device (C002) { - Name (_HID, "ACPI0007") - Name (_UID, 2) - } - Device (C003) { - Name (_HID, "ACPI0007") - Name (_UID, 3) - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if (DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */ - Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */ - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - - /* Operating System Capabilities Method */ - Method (_OSC, 4) - { - /* Check for PCI/PCI-X/PCIe GUID */ - If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) - { - /* Let OS control everything */ - Return (Arg3) - } - Else - { - /* Unrecognized UUID, so set bit 2 of Arg3 to 1 */ - CreateDWordField (Arg3, 0, CDW1) - Or (CDW1, 4, CDW1) - Return (Arg3) - } - } /* End _OSC */ - - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBX) - Store(HPBA, HPBX) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - #include "acpi/superio.asl" - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - /* Set the Bus number and Secondary Bus number for the PCI0 device - * The Secondary bus range for PCI0 lets the system - * know what bus values are allowed on the downstream - * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which - * range from [0-0xFF] but they do not need to be - * sequential. - */ - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x00FF, /* range maximum */ - 0x0000, /* translation */ - 0x0100, /* length */ - ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ - - IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ -#if 0 - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -} -/* End of ASL file */ diff --git a/src/mainboard/lippert/toucan-af/irq_tables.c b/src/mainboard/lippert/toucan-af/irq_tables.c deleted file mode 100644 index a066864..0000000 --- a/src/mainboard/lippert/toucan-af/irq_tables.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c deleted file mode 100644 index 1c9c5a6..0000000 --- a/src/mainboard/lippert/toucan-af/mainboard.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdlib.h> -#include <amdblocks/acpimmio.h> -#include <console/console.h> -#include <device/device.h> -#include <device/mmio.h> -#include <device/pci_ops.h> -#include <device/pci_def.h> -#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> -#include <vendorcode/amd/cimx/sb800/OEM.h> /* SMBUS0_BASE_ADDRESS */ -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include "mainboard/lippert/frontrunner-af/sema.h" - -static void init(struct device *dev) -{ - volatile u8 *spi_base; // base addr of Hudson's SPI host controller - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); - - /* Init Hudson GPIOs. */ - printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); - FCH_IOMUX(50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices - FCH_GPIO (50) = 0xC0; // = output set to 1 as it's never needed - FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# - FCH_GPIO (197) = 0x28; // = input, disable int. pull-up - FCH_IOMUX(56) = 1; // GPIO58-56: REV_ID2-0 - FCH_GPIO (56) = 0x28; // = inputs, disable int. pull-ups - FCH_IOMUX(57) = 1; - FCH_GPIO (57) = 0x28; - FCH_IOMUX(58) = 1; - FCH_GPIO (58) = 0x28; - FCH_IOMUX(187) = 2; // GPIO187,188,166,GPO160: GPO0-3 on COM Express connector - FCH_GPIO (187) = 0x08; // = outputs, disable PUs, default to 0 - FCH_IOMUX(188) = 2; - FCH_GPIO (188) = 0x08; - FCH_IOMUX(166) = 2; - FCH_GPIO (166) = 0x08; - // needed to make GPO160 work (Hudson Register Reference section 2.3.6.1) - FCH_PMIO(0xDC) &= ~0x80; FCH_PMIO(0xE6) = (FCH_PMIO(0xE6) & ~0x02) | 0x01; - FCH_IOMUX(160) = 1; - FCH_GPIO (160) = 0x08; - FCH_IOMUX(189) = 1; // GPIO189-192: GPI0-3 on COM Express connector - FCH_IOMUX(190) = 1; // default to inputs with int. PU - FCH_IOMUX(191) = 1; - FCH_IOMUX(192) = 1; - if (!fch_gpio_state(197)) // just in case anyone cares - printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); - printk(BIOS_INFO, "Board revision ID: %u\n", - fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); - - /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ - spi_base = (u8 *)((uintptr_t)pci_read_config32(pcidev_on_root(0x14, 3), - 0xA0) & 0xFFFFFFE0); - spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register - - /* Notify the SMC we're alive and kicking, or after a while it will - * effect a power cycle and switch to the alternate BIOS chip. - * Should be done as late as possible. - * Failure here does not matter if watchdog was already disabled, - * by configuration or previous boot, so ignore return value. - */ - sema_send_alive(); - - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); -} - -/********************************************** - * Enable the dedicated functions of the board. - **********************************************/ -static void mainboard_enable(struct device *dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - dev->ops->init = init; - - /* enable GPP CLK0 thru CLK1 */ - /* disable GPP CLK2 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0xFF); - write8(misc_mem_clk_cntrl + 1, 0x00); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); - - /* - * Initialize ASF registers to an arbitrary address because someone - * long ago set things up this way inside the SPD read code. The - * SPD read code has been made generic and moved out of the board - * directory, so the ASF init is being done here. - */ - pm_write8(0x29, 0x80); - pm_write8(0x28, 0x61); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/toucan-af/mptable.c b/src/mainboard/lippert/toucan-af/mptable.c deleted file mode 100644 index 347b781..0000000 --- a/src/mainboard/lippert/toucan-af/mptable.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); - - u8 byte; - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* Southbridge HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - struct device *dev = pcidev_on_root(0x14, 4); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/lippert/toucan-af/platform_cfg.h b/src/mainboard/lippert/toucan-af/platform_cfg.h deleted file mode 100644 index 3285d16..0000000 --- a/src/mainboard/lippert/toucan-af/platform_cfg.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE - * BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x0F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1E - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GPP_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 1 - -static const CODECENTRY sample_codec_alc886[] = /* Realtek ALC886/8 */ -{ - /* NID, PinConfig (Verbs 71F..C) */ - {0x11, 0x411111F0}, /* NPC */ - {0x12, 0x411111F0}, /* DMIC */ - {0x14, 0x01214110}, /* FRONT (Port-D) */ - {0x15, 0x01011112}, /* SURR (Port-A) */ - {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ - {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ - {0x18, 0x01A19930}, /* MIC1 (Port-B) */ - {0x19, 0x411111F0}, /* MIC2 (Port-F) */ - {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ - {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ - {0x1C, 0x411111F0}, /* CD-IN */ - {0x1D, 0x40132601}, /* BEEP-IN */ - {0x1E, 0x01441120}, /* S/PDIF-OUT */ - {0x1F, 0x01C46140}, /* S/PDIF-IN */ - {0xff, 0xffffffff} /* end of table */ -}; - -static const CODECTBLLIST codec_tablelist[] = -{ - {0x10ec0888, (CODECENTRY*)&sample_codec_alc886[0]}, - {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} -}; - -/** - * @def AZALIA_OEM_VERB_TABLE - * Mainboard specific codec verb table list - */ -#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) - -/* set up an ACPI preferred power management profile */ -/* from acpi.h - * PM_UNSPECIFIED = 0, - * PM_DESKTOP = 1, - * PM_MOBILE = 2, - * PM_WORKSTATION = 3, - * PM_ENTERPRISE_SERVER = 4, - * PM_SOHO_SERVER = 5, - * PM_APPLIANCE_PC = 6, - * PM_PERFORMANCE_SERVER = 7, - * PM_TABLET = 8 - */ -#define FADT_PM_PROFILE 1 - -#endif diff --git a/src/mainboard/lippert/toucan-af/romstage.c b/src/mainboard/lippert/toucan-af/romstage.c deleted file mode 100644 index ebbe4fc..0000000 --- a/src/mainboard/lippert/toucan-af/romstage.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <northbridge/amd/agesa/state_machine.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627dhg/w83627dhg.h> -#include <sb_cimx.h> - -#define SERIAL_DEV PNP_DEV(0x4e, W83627DHG_SP1) - -void board_BeforeAgesa(struct sysinfo *cb) -{ - sb_Poweron_Init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); -}
Hello build bot (Jenkins), Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38358
to look at the new patch set (#2).
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
mainboard: Drop unmaintained ROMCC boards
Remove unmaintained and unsupported old ROMCC boards. Those boards weren't hooked up for build.
Change-Id: I031fd3538787323188f6c5f0d0bba082f6bdee7e Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/adlink/CM2-GF/board_info.txt D src/mainboard/adlink/Kconfig D src/mainboard/adlink/Kconfig.name D src/mainboard/adlink/cExpress-GFR/board_info.txt D src/mainboard/amd/db-ft3b-lc/BiosCallOuts.c D src/mainboard/amd/db-ft3b-lc/Kconfig D src/mainboard/amd/db-ft3b-lc/Kconfig.name D src/mainboard/amd/db-ft3b-lc/Makefile.inc D src/mainboard/amd/db-ft3b-lc/Memphis_MEM4G16D3EABG.spd.hex D src/mainboard/amd/db-ft3b-lc/OemCustomize.c D src/mainboard/amd/db-ft3b-lc/acpi/gpe.asl D src/mainboard/amd/db-ft3b-lc/acpi/ide.asl D src/mainboard/amd/db-ft3b-lc/acpi/mainboard.asl D src/mainboard/amd/db-ft3b-lc/acpi/routing.asl D src/mainboard/amd/db-ft3b-lc/acpi/si.asl D src/mainboard/amd/db-ft3b-lc/acpi/sleep.asl D src/mainboard/amd/db-ft3b-lc/acpi/thermal.asl D src/mainboard/amd/db-ft3b-lc/acpi/usb_oc.asl D src/mainboard/amd/db-ft3b-lc/acpi_tables.c D src/mainboard/amd/db-ft3b-lc/board_info.txt D src/mainboard/amd/db-ft3b-lc/cmos.layout D src/mainboard/amd/db-ft3b-lc/devicetree.cb D src/mainboard/amd/db-ft3b-lc/dsdt.asl D src/mainboard/amd/db-ft3b-lc/irq_tables.c D src/mainboard/amd/db-ft3b-lc/mainboard.c D src/mainboard/amd/db-ft3b-lc/mptable.c D src/mainboard/amd/db-ft3b-lc/romstage.c D src/mainboard/amd/inagua/BiosCallOuts.c D src/mainboard/amd/inagua/Kconfig D src/mainboard/amd/inagua/Kconfig.name D src/mainboard/amd/inagua/Makefile.inc D src/mainboard/amd/inagua/OemCustomize.c D src/mainboard/amd/inagua/OptionsIds.h D src/mainboard/amd/inagua/acpi/gpe.asl D src/mainboard/amd/inagua/acpi/ide.asl D src/mainboard/amd/inagua/acpi/mainboard.asl D src/mainboard/amd/inagua/acpi/routing.asl D src/mainboard/amd/inagua/acpi/sata.asl D src/mainboard/amd/inagua/acpi/sleep.asl D src/mainboard/amd/inagua/acpi/superio.asl D src/mainboard/amd/inagua/acpi/usb_oc.asl D src/mainboard/amd/inagua/acpi_tables.c D src/mainboard/amd/inagua/board_info.txt D src/mainboard/amd/inagua/buildOpts.c D src/mainboard/amd/inagua/cmos.layout D src/mainboard/amd/inagua/devicetree.cb D src/mainboard/amd/inagua/dsdt.asl D src/mainboard/amd/inagua/irq_tables.c D src/mainboard/amd/inagua/mainboard.c D src/mainboard/amd/inagua/mptable.c D src/mainboard/amd/inagua/platform_cfg.h D src/mainboard/amd/inagua/romstage.c D src/mainboard/amd/lamar/BiosCallOuts.c D src/mainboard/amd/lamar/Kconfig D src/mainboard/amd/lamar/Kconfig.name D src/mainboard/amd/lamar/Makefile.inc D src/mainboard/amd/lamar/OemCustomize.c D src/mainboard/amd/lamar/acpi/gpe.asl D src/mainboard/amd/lamar/acpi/mainboard.asl D src/mainboard/amd/lamar/acpi/routing.asl D src/mainboard/amd/lamar/acpi/si.asl D src/mainboard/amd/lamar/acpi/sleep.asl D src/mainboard/amd/lamar/acpi/thermal.asl D src/mainboard/amd/lamar/acpi/usb_oc.asl D src/mainboard/amd/lamar/acpi_tables.c D src/mainboard/amd/lamar/board_info.txt D src/mainboard/amd/lamar/cmos.layout D src/mainboard/amd/lamar/devicetree.cb D src/mainboard/amd/lamar/dsdt.asl D src/mainboard/amd/lamar/irq_tables.c D src/mainboard/amd/lamar/mainboard.c D src/mainboard/amd/lamar/mptable.c D src/mainboard/amd/lamar/romstage.c D src/mainboard/amd/olivehill/BiosCallOuts.c D src/mainboard/amd/olivehill/Kconfig D src/mainboard/amd/olivehill/Kconfig.name D src/mainboard/amd/olivehill/Makefile.inc D src/mainboard/amd/olivehill/OemCustomize.c D src/mainboard/amd/olivehill/OptionsIds.h D src/mainboard/amd/olivehill/acpi/gpe.asl D src/mainboard/amd/olivehill/acpi/ide.asl D src/mainboard/amd/olivehill/acpi/mainboard.asl D src/mainboard/amd/olivehill/acpi/routing.asl D src/mainboard/amd/olivehill/acpi/sata.asl D src/mainboard/amd/olivehill/acpi/si.asl D src/mainboard/amd/olivehill/acpi/sleep.asl D src/mainboard/amd/olivehill/acpi/superio.asl D src/mainboard/amd/olivehill/acpi/thermal.asl D src/mainboard/amd/olivehill/acpi/usb_oc.asl D src/mainboard/amd/olivehill/acpi_tables.c D src/mainboard/amd/olivehill/board_info.txt D src/mainboard/amd/olivehill/buildOpts.c D src/mainboard/amd/olivehill/cmos.layout D src/mainboard/amd/olivehill/devicetree.cb D src/mainboard/amd/olivehill/dsdt.asl D src/mainboard/amd/olivehill/irq_tables.c D src/mainboard/amd/olivehill/mainboard.c D src/mainboard/amd/olivehill/mptable.c D src/mainboard/amd/olivehill/romstage.c D src/mainboard/amd/olivehillplus/BiosCallOuts.c D src/mainboard/amd/olivehillplus/Kconfig D src/mainboard/amd/olivehillplus/Kconfig.name D src/mainboard/amd/olivehillplus/Makefile.inc D src/mainboard/amd/olivehillplus/OemCustomize.c D src/mainboard/amd/olivehillplus/acpi/gpe.asl D src/mainboard/amd/olivehillplus/acpi/ide.asl D src/mainboard/amd/olivehillplus/acpi/mainboard.asl D src/mainboard/amd/olivehillplus/acpi/routing.asl D src/mainboard/amd/olivehillplus/acpi/si.asl D src/mainboard/amd/olivehillplus/acpi/sleep.asl D src/mainboard/amd/olivehillplus/acpi/thermal.asl D src/mainboard/amd/olivehillplus/acpi/usb_oc.asl D src/mainboard/amd/olivehillplus/acpi_tables.c D src/mainboard/amd/olivehillplus/board_info.txt D src/mainboard/amd/olivehillplus/cmos.layout D src/mainboard/amd/olivehillplus/devicetree.cb D src/mainboard/amd/olivehillplus/dsdt.asl D src/mainboard/amd/olivehillplus/irq_tables.c D src/mainboard/amd/olivehillplus/mainboard.c D src/mainboard/amd/olivehillplus/mptable.c D src/mainboard/amd/olivehillplus/romstage.c D src/mainboard/amd/parmer/BiosCallOuts.c D src/mainboard/amd/parmer/Kconfig D src/mainboard/amd/parmer/Kconfig.name D src/mainboard/amd/parmer/Makefile.inc D src/mainboard/amd/parmer/OemCustomize.c D src/mainboard/amd/parmer/OptionsIds.h D src/mainboard/amd/parmer/acpi/gpe.asl D src/mainboard/amd/parmer/acpi/mainboard.asl D src/mainboard/amd/parmer/acpi/routing.asl D src/mainboard/amd/parmer/acpi/sata.asl D src/mainboard/amd/parmer/acpi/si.asl D src/mainboard/amd/parmer/acpi/sleep.asl D src/mainboard/amd/parmer/acpi/superio.asl D src/mainboard/amd/parmer/acpi/thermal.asl D src/mainboard/amd/parmer/acpi/usb_oc.asl D src/mainboard/amd/parmer/acpi_tables.c D src/mainboard/amd/parmer/board_info.txt D src/mainboard/amd/parmer/buildOpts.c D src/mainboard/amd/parmer/cmos.layout D src/mainboard/amd/parmer/devicetree.cb D src/mainboard/amd/parmer/dsdt.asl D src/mainboard/amd/parmer/irq_tables.c D src/mainboard/amd/parmer/mainboard.c D src/mainboard/amd/parmer/mptable.c D src/mainboard/amd/parmer/romstage.c D src/mainboard/amd/persimmon/BiosCallOuts.c D src/mainboard/amd/persimmon/Kconfig D src/mainboard/amd/persimmon/Kconfig.name D src/mainboard/amd/persimmon/Makefile.inc D src/mainboard/amd/persimmon/OemCustomize.c D src/mainboard/amd/persimmon/OptionsIds.h D src/mainboard/amd/persimmon/acpi/gpe.asl D src/mainboard/amd/persimmon/acpi/ide.asl D src/mainboard/amd/persimmon/acpi/mainboard.asl D src/mainboard/amd/persimmon/acpi/routing.asl D src/mainboard/amd/persimmon/acpi/sata.asl D src/mainboard/amd/persimmon/acpi/sleep.asl D src/mainboard/amd/persimmon/acpi/superio.asl D src/mainboard/amd/persimmon/acpi/usb_oc.asl D src/mainboard/amd/persimmon/acpi_tables.c D src/mainboard/amd/persimmon/board_info.txt D src/mainboard/amd/persimmon/buildOpts.c D src/mainboard/amd/persimmon/cmos.layout D src/mainboard/amd/persimmon/devicetree.cb D src/mainboard/amd/persimmon/dsdt.asl D src/mainboard/amd/persimmon/irq_tables.c D src/mainboard/amd/persimmon/mainboard.c D src/mainboard/amd/persimmon/mptable.c D src/mainboard/amd/persimmon/platform_cfg.h D src/mainboard/amd/persimmon/romstage.c D src/mainboard/amd/south_station/BiosCallOuts.c D src/mainboard/amd/south_station/Kconfig D src/mainboard/amd/south_station/Kconfig.name D src/mainboard/amd/south_station/Makefile.inc D src/mainboard/amd/south_station/OemCustomize.c D src/mainboard/amd/south_station/OptionsIds.h D src/mainboard/amd/south_station/acpi/gpe.asl D src/mainboard/amd/south_station/acpi/ide.asl D src/mainboard/amd/south_station/acpi/mainboard.asl D src/mainboard/amd/south_station/acpi/routing.asl D src/mainboard/amd/south_station/acpi/sata.asl D src/mainboard/amd/south_station/acpi/sleep.asl D src/mainboard/amd/south_station/acpi/superio.asl D src/mainboard/amd/south_station/acpi/usb_oc.asl D src/mainboard/amd/south_station/acpi_tables.c D src/mainboard/amd/south_station/board_info.txt D src/mainboard/amd/south_station/buildOpts.c D src/mainboard/amd/south_station/cmos.layout D src/mainboard/amd/south_station/devicetree.cb D src/mainboard/amd/south_station/dsdt.asl D src/mainboard/amd/south_station/irq_tables.c D src/mainboard/amd/south_station/mainboard.c D src/mainboard/amd/south_station/mptable.c D src/mainboard/amd/south_station/platform_cfg.h D src/mainboard/amd/south_station/romstage.c D src/mainboard/amd/thatcher/BiosCallOuts.c D src/mainboard/amd/thatcher/Kconfig D src/mainboard/amd/thatcher/Kconfig.name D src/mainboard/amd/thatcher/Makefile.inc D src/mainboard/amd/thatcher/OemCustomize.c D src/mainboard/amd/thatcher/OptionsIds.h D src/mainboard/amd/thatcher/acpi/cpstate.asl D src/mainboard/amd/thatcher/acpi/gpe.asl D src/mainboard/amd/thatcher/acpi/mainboard.asl D src/mainboard/amd/thatcher/acpi/routing.asl D src/mainboard/amd/thatcher/acpi/sata.asl D src/mainboard/amd/thatcher/acpi/si.asl D src/mainboard/amd/thatcher/acpi/sleep.asl D src/mainboard/amd/thatcher/acpi/superio.asl D src/mainboard/amd/thatcher/acpi/thermal.asl D src/mainboard/amd/thatcher/acpi/usb_oc.asl D src/mainboard/amd/thatcher/acpi_tables.c D src/mainboard/amd/thatcher/board_info.txt D src/mainboard/amd/thatcher/buildOpts.c D src/mainboard/amd/thatcher/cmos.layout D src/mainboard/amd/thatcher/devicetree.cb D src/mainboard/amd/thatcher/dsdt.asl D src/mainboard/amd/thatcher/irq_tables.c D src/mainboard/amd/thatcher/mainboard.c D src/mainboard/amd/thatcher/mptable.c D src/mainboard/amd/thatcher/romstage.c D src/mainboard/amd/union_station/BiosCallOuts.c D src/mainboard/amd/union_station/Kconfig D src/mainboard/amd/union_station/Kconfig.name D src/mainboard/amd/union_station/Makefile.inc D src/mainboard/amd/union_station/OemCustomize.c D src/mainboard/amd/union_station/OptionsIds.h D src/mainboard/amd/union_station/acpi/gpe.asl D src/mainboard/amd/union_station/acpi/ide.asl D src/mainboard/amd/union_station/acpi/mainboard.asl D src/mainboard/amd/union_station/acpi/routing.asl D src/mainboard/amd/union_station/acpi/sata.asl D src/mainboard/amd/union_station/acpi/sleep.asl D src/mainboard/amd/union_station/acpi/superio.asl D src/mainboard/amd/union_station/acpi/usb_oc.asl D src/mainboard/amd/union_station/acpi_tables.c D src/mainboard/amd/union_station/board_info.txt D src/mainboard/amd/union_station/buildOpts.c D src/mainboard/amd/union_station/cmos.layout D src/mainboard/amd/union_station/devicetree.cb D src/mainboard/amd/union_station/dsdt.asl D src/mainboard/amd/union_station/irq_tables.c D src/mainboard/amd/union_station/mainboard.c D src/mainboard/amd/union_station/mptable.c D src/mainboard/amd/union_station/platform_cfg.h D src/mainboard/amd/union_station/romstage.c M src/mainboard/asus/am1i-a/BiosCallOuts.c M src/mainboard/asus/f2a85-m/mainboard.c D src/mainboard/bap/Kconfig D src/mainboard/bap/Kconfig.name D src/mainboard/bap/ode_e20XX/BAP_Q7_1066.spd.hex D src/mainboard/bap/ode_e20XX/BAP_Q7_800.spd.hex D src/mainboard/bap/ode_e20XX/BiosCallOuts.c D src/mainboard/bap/ode_e20XX/Kconfig D src/mainboard/bap/ode_e20XX/Kconfig.name D src/mainboard/bap/ode_e20XX/Makefile.inc D src/mainboard/bap/ode_e20XX/OemCustomize.c D src/mainboard/bap/ode_e20XX/OptionsIds.h D src/mainboard/bap/ode_e20XX/acpi/gpe.asl D src/mainboard/bap/ode_e20XX/acpi/ide.asl D src/mainboard/bap/ode_e20XX/acpi/mainboard.asl D src/mainboard/bap/ode_e20XX/acpi/routing.asl D src/mainboard/bap/ode_e20XX/acpi/sata.asl D src/mainboard/bap/ode_e20XX/acpi/si.asl D src/mainboard/bap/ode_e20XX/acpi/sleep.asl D src/mainboard/bap/ode_e20XX/acpi/superio.asl D src/mainboard/bap/ode_e20XX/acpi/thermal.asl D src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl D src/mainboard/bap/ode_e20XX/acpi_tables.c D src/mainboard/bap/ode_e20XX/board_info.txt D src/mainboard/bap/ode_e20XX/buildOpts.c D src/mainboard/bap/ode_e20XX/cmos.layout D src/mainboard/bap/ode_e20XX/devicetree.cb D src/mainboard/bap/ode_e20XX/dsdt.asl D src/mainboard/bap/ode_e20XX/irq_tables.c D src/mainboard/bap/ode_e20XX/mainboard.c D src/mainboard/bap/ode_e20XX/mptable.c D src/mainboard/bap/ode_e20XX/romstage.c D src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex D src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex D src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex D src/mainboard/bap/ode_e21XX/BiosCallOuts.c D src/mainboard/bap/ode_e21XX/Kconfig D src/mainboard/bap/ode_e21XX/Kconfig.name D src/mainboard/bap/ode_e21XX/Makefile.inc D src/mainboard/bap/ode_e21XX/OemCustomize.c D src/mainboard/bap/ode_e21XX/acpi/gpe.asl D src/mainboard/bap/ode_e21XX/acpi/ide.asl D src/mainboard/bap/ode_e21XX/acpi/mainboard.asl D src/mainboard/bap/ode_e21XX/acpi/routing.asl D src/mainboard/bap/ode_e21XX/acpi/si.asl D src/mainboard/bap/ode_e21XX/acpi/sleep.asl D src/mainboard/bap/ode_e21XX/acpi/superio.asl D src/mainboard/bap/ode_e21XX/acpi/thermal.asl D src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl D src/mainboard/bap/ode_e21XX/acpi_tables.c D src/mainboard/bap/ode_e21XX/board_info.txt D src/mainboard/bap/ode_e21XX/cmos.layout D src/mainboard/bap/ode_e21XX/devicetree.cb D src/mainboard/bap/ode_e21XX/dsdt.asl D src/mainboard/bap/ode_e21XX/irq_tables.c D src/mainboard/bap/ode_e21XX/mainboard.c D src/mainboard/bap/ode_e21XX/mptable.c D src/mainboard/bap/ode_e21XX/romstage.c D src/mainboard/biostar/a68n_5200/BiosCallOuts.c D src/mainboard/biostar/a68n_5200/Kconfig D src/mainboard/biostar/a68n_5200/Kconfig.name D src/mainboard/biostar/a68n_5200/Makefile.inc D src/mainboard/biostar/a68n_5200/OemCustomize.c D src/mainboard/biostar/a68n_5200/OptionsIds.h D src/mainboard/biostar/a68n_5200/acpi/AmdImc.asl D src/mainboard/biostar/a68n_5200/acpi/gpe.asl D src/mainboard/biostar/a68n_5200/acpi/ide.asl D src/mainboard/biostar/a68n_5200/acpi/mainboard.asl D src/mainboard/biostar/a68n_5200/acpi/routing.asl D src/mainboard/biostar/a68n_5200/acpi/sata.asl D src/mainboard/biostar/a68n_5200/acpi/si.asl D src/mainboard/biostar/a68n_5200/acpi/sleep.asl D src/mainboard/biostar/a68n_5200/acpi/superio.asl D src/mainboard/biostar/a68n_5200/acpi/thermal.asl D src/mainboard/biostar/a68n_5200/acpi/usb_oc.asl D src/mainboard/biostar/a68n_5200/acpi_tables.c D src/mainboard/biostar/a68n_5200/board_info.txt D src/mainboard/biostar/a68n_5200/buildOpts.c D src/mainboard/biostar/a68n_5200/cmos.layout D src/mainboard/biostar/a68n_5200/devicetree.cb D src/mainboard/biostar/a68n_5200/dsdt.asl D src/mainboard/biostar/a68n_5200/irq_tables.c D src/mainboard/biostar/a68n_5200/mainboard.c D src/mainboard/biostar/a68n_5200/mptable.c D src/mainboard/biostar/a68n_5200/romstage.c M src/mainboard/biostar/am1ml/BiosCallOuts.c D src/mainboard/elmex/pcm205400/BiosCallOuts.c D src/mainboard/elmex/pcm205400/Kconfig D src/mainboard/elmex/pcm205400/Kconfig.name D src/mainboard/elmex/pcm205400/Makefile.inc D src/mainboard/elmex/pcm205400/OemCustomize.c D src/mainboard/elmex/pcm205400/OptionsIds.h D src/mainboard/elmex/pcm205400/acpi/gpe.asl D src/mainboard/elmex/pcm205400/acpi/ide.asl D src/mainboard/elmex/pcm205400/acpi/mainboard.asl D src/mainboard/elmex/pcm205400/acpi/routing.asl D src/mainboard/elmex/pcm205400/acpi/sata.asl D src/mainboard/elmex/pcm205400/acpi/sleep.asl D src/mainboard/elmex/pcm205400/acpi/superio.asl D src/mainboard/elmex/pcm205400/acpi/usb_oc.asl D src/mainboard/elmex/pcm205400/acpi_tables.c D src/mainboard/elmex/pcm205400/board_info.txt D src/mainboard/elmex/pcm205400/buildOpts.c D src/mainboard/elmex/pcm205400/cmos.layout D src/mainboard/elmex/pcm205400/devicetree.cb D src/mainboard/elmex/pcm205400/dsdt.asl D src/mainboard/elmex/pcm205400/irq_tables.c D src/mainboard/elmex/pcm205400/mainboard.c D src/mainboard/elmex/pcm205400/mptable.c D src/mainboard/elmex/pcm205400/platform_cfg.h D src/mainboard/elmex/pcm205400/romstage.c D src/mainboard/elmex/pcm205401/Kconfig D src/mainboard/elmex/pcm205401/Kconfig.name D src/mainboard/elmex/pcm205401/board_info.txt M src/mainboard/gizmosphere/gizmo/BiosCallOuts.c M src/mainboard/gizmosphere/gizmo/platform_cfg.h D src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c D src/mainboard/gizmosphere/gizmo2/Kconfig D src/mainboard/gizmosphere/gizmo2/Kconfig.name D src/mainboard/gizmosphere/gizmo2/Makefile.inc D src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex D src/mainboard/gizmosphere/gizmo2/OemCustomize.c D src/mainboard/gizmosphere/gizmo2/OptionsIds.h D src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl D src/mainboard/gizmosphere/gizmo2/acpi/ide.asl D src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl D src/mainboard/gizmosphere/gizmo2/acpi/routing.asl D src/mainboard/gizmosphere/gizmo2/acpi/sata.asl D src/mainboard/gizmosphere/gizmo2/acpi/si.asl D src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl D src/mainboard/gizmosphere/gizmo2/acpi/superio.asl D src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl D src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl D src/mainboard/gizmosphere/gizmo2/acpi_tables.c D src/mainboard/gizmosphere/gizmo2/board_info.txt D src/mainboard/gizmosphere/gizmo2/buildOpts.c D src/mainboard/gizmosphere/gizmo2/cmos.layout D src/mainboard/gizmosphere/gizmo2/devicetree.cb D src/mainboard/gizmosphere/gizmo2/dsdt.asl D src/mainboard/gizmosphere/gizmo2/irq_tables.c D src/mainboard/gizmosphere/gizmo2/mainboard.c D src/mainboard/gizmosphere/gizmo2/mptable.c D src/mainboard/gizmosphere/gizmo2/romstage.c D src/mainboard/hp/abm/BiosCallOuts.c D src/mainboard/hp/abm/Kconfig D src/mainboard/hp/abm/Kconfig.name D src/mainboard/hp/abm/Makefile.inc D src/mainboard/hp/abm/OemCustomize.c D src/mainboard/hp/abm/OptionsIds.h D src/mainboard/hp/abm/acpi/gpe.asl D src/mainboard/hp/abm/acpi/ide.asl D src/mainboard/hp/abm/acpi/mainboard.asl D src/mainboard/hp/abm/acpi/routing.asl D src/mainboard/hp/abm/acpi/sata.asl D src/mainboard/hp/abm/acpi/si.asl D src/mainboard/hp/abm/acpi/sleep.asl D src/mainboard/hp/abm/acpi/superio.asl D src/mainboard/hp/abm/acpi/thermal.asl D src/mainboard/hp/abm/acpi/usb_oc.asl D src/mainboard/hp/abm/acpi_tables.c D src/mainboard/hp/abm/board_info.txt D src/mainboard/hp/abm/buildOpts.c D src/mainboard/hp/abm/cmos.layout D src/mainboard/hp/abm/devicetree.cb D src/mainboard/hp/abm/dsdt.asl D src/mainboard/hp/abm/irq_tables.c D src/mainboard/hp/abm/mainboard.c D src/mainboard/hp/abm/mptable.c D src/mainboard/hp/abm/romstage.c D src/mainboard/jetway/Kconfig D src/mainboard/jetway/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c D src/mainboard/jetway/nf81-t56n-lf/Kconfig D src/mainboard/jetway/nf81-t56n-lf/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/Makefile.inc D src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c D src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h D src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/mainboard.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl D src/mainboard/jetway/nf81-t56n-lf/acpi_tables.c D src/mainboard/jetway/nf81-t56n-lf/board_info.txt D src/mainboard/jetway/nf81-t56n-lf/buildOpts.c D src/mainboard/jetway/nf81-t56n-lf/cmos.layout D src/mainboard/jetway/nf81-t56n-lf/devicetree.cb D src/mainboard/jetway/nf81-t56n-lf/dsdt.asl D src/mainboard/jetway/nf81-t56n-lf/irq_tables.c D src/mainboard/jetway/nf81-t56n-lf/mainboard.c D src/mainboard/jetway/nf81-t56n-lf/mptable.c D src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h D src/mainboard/jetway/nf81-t56n-lf/romstage.c D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb.asl D src/mainboard/lippert/frontrunner-af/acpi_tables.c D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/mptable.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/romstage.c D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/toucan-af/BiosCallOuts.c D src/mainboard/lippert/toucan-af/Kconfig D src/mainboard/lippert/toucan-af/Kconfig.name D src/mainboard/lippert/toucan-af/Makefile.inc D src/mainboard/lippert/toucan-af/OemCustomize.c D src/mainboard/lippert/toucan-af/OptionsIds.h D src/mainboard/lippert/toucan-af/acpi/routing.asl D src/mainboard/lippert/toucan-af/acpi/sata.asl D src/mainboard/lippert/toucan-af/acpi/superio.asl D src/mainboard/lippert/toucan-af/acpi/usb.asl D src/mainboard/lippert/toucan-af/acpi_tables.c D src/mainboard/lippert/toucan-af/board_info.txt D src/mainboard/lippert/toucan-af/buildOpts.c D src/mainboard/lippert/toucan-af/cmos.layout D src/mainboard/lippert/toucan-af/devicetree.cb D src/mainboard/lippert/toucan-af/dsdt.asl D src/mainboard/lippert/toucan-af/irq_tables.c D src/mainboard/lippert/toucan-af/mainboard.c D src/mainboard/lippert/toucan-af/mptable.c D src/mainboard/lippert/toucan-af/platform_cfg.h D src/mainboard/lippert/toucan-af/romstage.c M src/mainboard/msi/ms7721/mainboard.c M src/mainboard/pcengines/apu1/BiosCallOuts.c M src/mainboard/pcengines/apu1/platform_cfg.h 491 files changed, 1 insertion(+), 50,081 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/38358/2
Kyösti Mälkki has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 2: Code-Review-2
As I told in some (now abandoned) commit comments, I am going to land some changes prior to any board removals. Also I showed green light to Mike that he can move board to !ROMCC_BOOTBLOCK if he wishes to do so.
There is mailing list thread setting new deadlines to February, there ie no point rebasing this change until that.
Nico Huber has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 2:
Patch Set 2: Code-Review-2
As I told in some (now abandoned) commit comments, I am going to land some changes prior to any board removals. Also I showed green light to Mike that he can move board to !ROMCC_BOOTBLOCK if he wishes to do so.
There is mailing list thread setting new deadlines to February, there ie no point rebasing this change until that.
Are you sure the mailing list was included? Was there anything after the "last calls"? (where you set a February deadline for three boards that don't show up here)
Hello Kyösti Mälkki, Piotr Król, build bot (Jenkins), Nico Huber, Michał Żygowski, Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38358
to look at the new patch set (#3).
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
mainboard: Drop unmaintained ROMCC boards
Remove unmaintained and unsupported old ROMCC boards. Those boards weren't hooked up for build.
Change-Id: I031fd3538787323188f6c5f0d0bba082f6bdee7e Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/adlink/CM2-GF/board_info.txt D src/mainboard/adlink/Kconfig D src/mainboard/adlink/Kconfig.name D src/mainboard/adlink/cExpress-GFR/board_info.txt D src/mainboard/amd/db-ft3b-lc/BiosCallOuts.c D src/mainboard/amd/db-ft3b-lc/Kconfig D src/mainboard/amd/db-ft3b-lc/Kconfig.name D src/mainboard/amd/db-ft3b-lc/Makefile.inc D src/mainboard/amd/db-ft3b-lc/Memphis_MEM4G16D3EABG.spd.hex D src/mainboard/amd/db-ft3b-lc/OemCustomize.c D src/mainboard/amd/db-ft3b-lc/acpi/gpe.asl D src/mainboard/amd/db-ft3b-lc/acpi/ide.asl D src/mainboard/amd/db-ft3b-lc/acpi/mainboard.asl D src/mainboard/amd/db-ft3b-lc/acpi/routing.asl D src/mainboard/amd/db-ft3b-lc/acpi/si.asl D src/mainboard/amd/db-ft3b-lc/acpi/sleep.asl D src/mainboard/amd/db-ft3b-lc/acpi/thermal.asl D src/mainboard/amd/db-ft3b-lc/acpi/usb_oc.asl D src/mainboard/amd/db-ft3b-lc/acpi_tables.c D src/mainboard/amd/db-ft3b-lc/board_info.txt D src/mainboard/amd/db-ft3b-lc/cmos.layout D src/mainboard/amd/db-ft3b-lc/devicetree.cb D src/mainboard/amd/db-ft3b-lc/dsdt.asl D src/mainboard/amd/db-ft3b-lc/irq_tables.c D src/mainboard/amd/db-ft3b-lc/mainboard.c D src/mainboard/amd/db-ft3b-lc/mptable.c D src/mainboard/amd/db-ft3b-lc/romstage.c D src/mainboard/amd/inagua/BiosCallOuts.c D src/mainboard/amd/inagua/Kconfig D src/mainboard/amd/inagua/Kconfig.name D src/mainboard/amd/inagua/Makefile.inc D src/mainboard/amd/inagua/OemCustomize.c D src/mainboard/amd/inagua/OptionsIds.h D src/mainboard/amd/inagua/acpi/gpe.asl D src/mainboard/amd/inagua/acpi/ide.asl D src/mainboard/amd/inagua/acpi/mainboard.asl D src/mainboard/amd/inagua/acpi/routing.asl D src/mainboard/amd/inagua/acpi/sata.asl D src/mainboard/amd/inagua/acpi/sleep.asl D src/mainboard/amd/inagua/acpi/superio.asl D src/mainboard/amd/inagua/acpi/usb_oc.asl D src/mainboard/amd/inagua/acpi_tables.c D src/mainboard/amd/inagua/board_info.txt D src/mainboard/amd/inagua/buildOpts.c D src/mainboard/amd/inagua/cmos.layout D src/mainboard/amd/inagua/devicetree.cb D src/mainboard/amd/inagua/dsdt.asl D src/mainboard/amd/inagua/irq_tables.c D src/mainboard/amd/inagua/mainboard.c D src/mainboard/amd/inagua/mptable.c D src/mainboard/amd/inagua/platform_cfg.h D src/mainboard/amd/inagua/romstage.c D src/mainboard/amd/lamar/BiosCallOuts.c D src/mainboard/amd/lamar/Kconfig D src/mainboard/amd/lamar/Kconfig.name D src/mainboard/amd/lamar/Makefile.inc D src/mainboard/amd/lamar/OemCustomize.c D src/mainboard/amd/lamar/acpi/gpe.asl D src/mainboard/amd/lamar/acpi/mainboard.asl D src/mainboard/amd/lamar/acpi/routing.asl D src/mainboard/amd/lamar/acpi/si.asl D src/mainboard/amd/lamar/acpi/sleep.asl D src/mainboard/amd/lamar/acpi/thermal.asl D src/mainboard/amd/lamar/acpi/usb_oc.asl D src/mainboard/amd/lamar/acpi_tables.c D src/mainboard/amd/lamar/board_info.txt D src/mainboard/amd/lamar/cmos.layout D src/mainboard/amd/lamar/devicetree.cb D src/mainboard/amd/lamar/dsdt.asl D src/mainboard/amd/lamar/irq_tables.c D src/mainboard/amd/lamar/mainboard.c D src/mainboard/amd/lamar/mptable.c D src/mainboard/amd/lamar/romstage.c D src/mainboard/amd/olivehill/BiosCallOuts.c D src/mainboard/amd/olivehill/Kconfig D src/mainboard/amd/olivehill/Kconfig.name D src/mainboard/amd/olivehill/Makefile.inc D src/mainboard/amd/olivehill/OemCustomize.c D src/mainboard/amd/olivehill/OptionsIds.h D src/mainboard/amd/olivehill/acpi/gpe.asl D src/mainboard/amd/olivehill/acpi/ide.asl D src/mainboard/amd/olivehill/acpi/mainboard.asl D src/mainboard/amd/olivehill/acpi/routing.asl D src/mainboard/amd/olivehill/acpi/sata.asl D src/mainboard/amd/olivehill/acpi/si.asl D src/mainboard/amd/olivehill/acpi/sleep.asl D src/mainboard/amd/olivehill/acpi/superio.asl D src/mainboard/amd/olivehill/acpi/thermal.asl D src/mainboard/amd/olivehill/acpi/usb_oc.asl D src/mainboard/amd/olivehill/acpi_tables.c D src/mainboard/amd/olivehill/board_info.txt D src/mainboard/amd/olivehill/buildOpts.c D src/mainboard/amd/olivehill/cmos.layout D src/mainboard/amd/olivehill/devicetree.cb D src/mainboard/amd/olivehill/dsdt.asl D src/mainboard/amd/olivehill/irq_tables.c D src/mainboard/amd/olivehill/mainboard.c D src/mainboard/amd/olivehill/mptable.c D src/mainboard/amd/olivehill/romstage.c D src/mainboard/amd/olivehillplus/BiosCallOuts.c D src/mainboard/amd/olivehillplus/Kconfig D src/mainboard/amd/olivehillplus/Kconfig.name D src/mainboard/amd/olivehillplus/Makefile.inc D src/mainboard/amd/olivehillplus/OemCustomize.c D src/mainboard/amd/olivehillplus/acpi/gpe.asl D src/mainboard/amd/olivehillplus/acpi/ide.asl D src/mainboard/amd/olivehillplus/acpi/mainboard.asl D src/mainboard/amd/olivehillplus/acpi/routing.asl D src/mainboard/amd/olivehillplus/acpi/si.asl D src/mainboard/amd/olivehillplus/acpi/sleep.asl D src/mainboard/amd/olivehillplus/acpi/thermal.asl D src/mainboard/amd/olivehillplus/acpi/usb_oc.asl D src/mainboard/amd/olivehillplus/acpi_tables.c D src/mainboard/amd/olivehillplus/board_info.txt D src/mainboard/amd/olivehillplus/cmos.layout D src/mainboard/amd/olivehillplus/devicetree.cb D src/mainboard/amd/olivehillplus/dsdt.asl D src/mainboard/amd/olivehillplus/irq_tables.c D src/mainboard/amd/olivehillplus/mainboard.c D src/mainboard/amd/olivehillplus/mptable.c D src/mainboard/amd/olivehillplus/romstage.c D src/mainboard/amd/parmer/BiosCallOuts.c D src/mainboard/amd/parmer/Kconfig D src/mainboard/amd/parmer/Kconfig.name D src/mainboard/amd/parmer/Makefile.inc D src/mainboard/amd/parmer/OemCustomize.c D src/mainboard/amd/parmer/OptionsIds.h D src/mainboard/amd/parmer/acpi/gpe.asl D src/mainboard/amd/parmer/acpi/mainboard.asl D src/mainboard/amd/parmer/acpi/routing.asl D src/mainboard/amd/parmer/acpi/sata.asl D src/mainboard/amd/parmer/acpi/si.asl D src/mainboard/amd/parmer/acpi/sleep.asl D src/mainboard/amd/parmer/acpi/superio.asl D src/mainboard/amd/parmer/acpi/thermal.asl D src/mainboard/amd/parmer/acpi/usb_oc.asl D src/mainboard/amd/parmer/acpi_tables.c D src/mainboard/amd/parmer/board_info.txt D src/mainboard/amd/parmer/buildOpts.c D src/mainboard/amd/parmer/cmos.layout D src/mainboard/amd/parmer/devicetree.cb D src/mainboard/amd/parmer/dsdt.asl D src/mainboard/amd/parmer/irq_tables.c D src/mainboard/amd/parmer/mainboard.c D src/mainboard/amd/parmer/mptable.c D src/mainboard/amd/parmer/romstage.c D src/mainboard/amd/persimmon/BiosCallOuts.c D src/mainboard/amd/persimmon/Kconfig D src/mainboard/amd/persimmon/Kconfig.name D src/mainboard/amd/persimmon/Makefile.inc D src/mainboard/amd/persimmon/OemCustomize.c D src/mainboard/amd/persimmon/OptionsIds.h D src/mainboard/amd/persimmon/acpi/gpe.asl D src/mainboard/amd/persimmon/acpi/ide.asl D src/mainboard/amd/persimmon/acpi/mainboard.asl D src/mainboard/amd/persimmon/acpi/routing.asl D src/mainboard/amd/persimmon/acpi/sata.asl D src/mainboard/amd/persimmon/acpi/sleep.asl D src/mainboard/amd/persimmon/acpi/superio.asl D src/mainboard/amd/persimmon/acpi/usb_oc.asl D src/mainboard/amd/persimmon/acpi_tables.c D src/mainboard/amd/persimmon/board_info.txt D src/mainboard/amd/persimmon/buildOpts.c D src/mainboard/amd/persimmon/cmos.layout D src/mainboard/amd/persimmon/devicetree.cb D src/mainboard/amd/persimmon/dsdt.asl D src/mainboard/amd/persimmon/irq_tables.c D src/mainboard/amd/persimmon/mainboard.c D src/mainboard/amd/persimmon/mptable.c D src/mainboard/amd/persimmon/platform_cfg.h D src/mainboard/amd/persimmon/romstage.c D src/mainboard/amd/south_station/BiosCallOuts.c D src/mainboard/amd/south_station/Kconfig D src/mainboard/amd/south_station/Kconfig.name D src/mainboard/amd/south_station/Makefile.inc D src/mainboard/amd/south_station/OemCustomize.c D src/mainboard/amd/south_station/OptionsIds.h D src/mainboard/amd/south_station/acpi/gpe.asl D src/mainboard/amd/south_station/acpi/ide.asl D src/mainboard/amd/south_station/acpi/mainboard.asl D src/mainboard/amd/south_station/acpi/routing.asl D src/mainboard/amd/south_station/acpi/sata.asl D src/mainboard/amd/south_station/acpi/sleep.asl D src/mainboard/amd/south_station/acpi/superio.asl D src/mainboard/amd/south_station/acpi/usb_oc.asl D src/mainboard/amd/south_station/acpi_tables.c D src/mainboard/amd/south_station/board_info.txt D src/mainboard/amd/south_station/buildOpts.c D src/mainboard/amd/south_station/cmos.layout D src/mainboard/amd/south_station/devicetree.cb D src/mainboard/amd/south_station/dsdt.asl D src/mainboard/amd/south_station/irq_tables.c D src/mainboard/amd/south_station/mainboard.c D src/mainboard/amd/south_station/mptable.c D src/mainboard/amd/south_station/platform_cfg.h D src/mainboard/amd/south_station/romstage.c D src/mainboard/amd/thatcher/BiosCallOuts.c D src/mainboard/amd/thatcher/Kconfig D src/mainboard/amd/thatcher/Kconfig.name D src/mainboard/amd/thatcher/Makefile.inc D src/mainboard/amd/thatcher/OemCustomize.c D src/mainboard/amd/thatcher/OptionsIds.h D src/mainboard/amd/thatcher/acpi/cpstate.asl D src/mainboard/amd/thatcher/acpi/gpe.asl D src/mainboard/amd/thatcher/acpi/mainboard.asl D src/mainboard/amd/thatcher/acpi/routing.asl D src/mainboard/amd/thatcher/acpi/sata.asl D src/mainboard/amd/thatcher/acpi/si.asl D src/mainboard/amd/thatcher/acpi/sleep.asl D src/mainboard/amd/thatcher/acpi/superio.asl D src/mainboard/amd/thatcher/acpi/thermal.asl D src/mainboard/amd/thatcher/acpi/usb_oc.asl D src/mainboard/amd/thatcher/acpi_tables.c D src/mainboard/amd/thatcher/board_info.txt D src/mainboard/amd/thatcher/buildOpts.c D src/mainboard/amd/thatcher/cmos.layout D src/mainboard/amd/thatcher/devicetree.cb D src/mainboard/amd/thatcher/dsdt.asl D src/mainboard/amd/thatcher/irq_tables.c D src/mainboard/amd/thatcher/mainboard.c D src/mainboard/amd/thatcher/mptable.c D src/mainboard/amd/thatcher/romstage.c D src/mainboard/amd/union_station/BiosCallOuts.c D src/mainboard/amd/union_station/Kconfig D src/mainboard/amd/union_station/Kconfig.name D src/mainboard/amd/union_station/Makefile.inc D src/mainboard/amd/union_station/OemCustomize.c D src/mainboard/amd/union_station/OptionsIds.h D src/mainboard/amd/union_station/acpi/gpe.asl D src/mainboard/amd/union_station/acpi/ide.asl D src/mainboard/amd/union_station/acpi/mainboard.asl D src/mainboard/amd/union_station/acpi/routing.asl D src/mainboard/amd/union_station/acpi/sata.asl D src/mainboard/amd/union_station/acpi/sleep.asl D src/mainboard/amd/union_station/acpi/superio.asl D src/mainboard/amd/union_station/acpi/usb_oc.asl D src/mainboard/amd/union_station/acpi_tables.c D src/mainboard/amd/union_station/board_info.txt D src/mainboard/amd/union_station/buildOpts.c D src/mainboard/amd/union_station/cmos.layout D src/mainboard/amd/union_station/devicetree.cb D src/mainboard/amd/union_station/dsdt.asl D src/mainboard/amd/union_station/irq_tables.c D src/mainboard/amd/union_station/mainboard.c D src/mainboard/amd/union_station/mptable.c D src/mainboard/amd/union_station/platform_cfg.h D src/mainboard/amd/union_station/romstage.c M src/mainboard/asus/am1i-a/BiosCallOuts.c M src/mainboard/asus/f2a85-m/mainboard.c D src/mainboard/bap/Kconfig D src/mainboard/bap/Kconfig.name D src/mainboard/bap/ode_e20XX/BAP_Q7_1066.spd.hex D src/mainboard/bap/ode_e20XX/BAP_Q7_800.spd.hex D src/mainboard/bap/ode_e20XX/BiosCallOuts.c D src/mainboard/bap/ode_e20XX/Kconfig D src/mainboard/bap/ode_e20XX/Kconfig.name D src/mainboard/bap/ode_e20XX/Makefile.inc D src/mainboard/bap/ode_e20XX/OemCustomize.c D src/mainboard/bap/ode_e20XX/OptionsIds.h D src/mainboard/bap/ode_e20XX/acpi/gpe.asl D src/mainboard/bap/ode_e20XX/acpi/ide.asl D src/mainboard/bap/ode_e20XX/acpi/mainboard.asl D src/mainboard/bap/ode_e20XX/acpi/routing.asl D src/mainboard/bap/ode_e20XX/acpi/sata.asl D src/mainboard/bap/ode_e20XX/acpi/si.asl D src/mainboard/bap/ode_e20XX/acpi/sleep.asl D src/mainboard/bap/ode_e20XX/acpi/superio.asl D src/mainboard/bap/ode_e20XX/acpi/thermal.asl D src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl D src/mainboard/bap/ode_e20XX/acpi_tables.c D src/mainboard/bap/ode_e20XX/board_info.txt D src/mainboard/bap/ode_e20XX/buildOpts.c D src/mainboard/bap/ode_e20XX/cmos.layout D src/mainboard/bap/ode_e20XX/devicetree.cb D src/mainboard/bap/ode_e20XX/dsdt.asl D src/mainboard/bap/ode_e20XX/irq_tables.c D src/mainboard/bap/ode_e20XX/mainboard.c D src/mainboard/bap/ode_e20XX/mptable.c D src/mainboard/bap/ode_e20XX/romstage.c D src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex D src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex D src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex D src/mainboard/bap/ode_e21XX/BiosCallOuts.c D src/mainboard/bap/ode_e21XX/Kconfig D src/mainboard/bap/ode_e21XX/Kconfig.name D src/mainboard/bap/ode_e21XX/Makefile.inc D src/mainboard/bap/ode_e21XX/OemCustomize.c D src/mainboard/bap/ode_e21XX/acpi/gpe.asl D src/mainboard/bap/ode_e21XX/acpi/ide.asl D src/mainboard/bap/ode_e21XX/acpi/mainboard.asl D src/mainboard/bap/ode_e21XX/acpi/routing.asl D src/mainboard/bap/ode_e21XX/acpi/si.asl D src/mainboard/bap/ode_e21XX/acpi/sleep.asl D src/mainboard/bap/ode_e21XX/acpi/superio.asl D src/mainboard/bap/ode_e21XX/acpi/thermal.asl D src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl D src/mainboard/bap/ode_e21XX/acpi_tables.c D src/mainboard/bap/ode_e21XX/board_info.txt D src/mainboard/bap/ode_e21XX/cmos.layout D src/mainboard/bap/ode_e21XX/devicetree.cb D src/mainboard/bap/ode_e21XX/dsdt.asl D src/mainboard/bap/ode_e21XX/irq_tables.c D src/mainboard/bap/ode_e21XX/mainboard.c D src/mainboard/bap/ode_e21XX/mptable.c D src/mainboard/bap/ode_e21XX/romstage.c D src/mainboard/biostar/a68n_5200/BiosCallOuts.c D src/mainboard/biostar/a68n_5200/Kconfig D src/mainboard/biostar/a68n_5200/Kconfig.name D src/mainboard/biostar/a68n_5200/Makefile.inc D src/mainboard/biostar/a68n_5200/OemCustomize.c D src/mainboard/biostar/a68n_5200/OptionsIds.h D src/mainboard/biostar/a68n_5200/acpi/AmdImc.asl D src/mainboard/biostar/a68n_5200/acpi/gpe.asl D src/mainboard/biostar/a68n_5200/acpi/ide.asl D src/mainboard/biostar/a68n_5200/acpi/mainboard.asl D src/mainboard/biostar/a68n_5200/acpi/routing.asl D src/mainboard/biostar/a68n_5200/acpi/sata.asl D src/mainboard/biostar/a68n_5200/acpi/si.asl D src/mainboard/biostar/a68n_5200/acpi/sleep.asl D src/mainboard/biostar/a68n_5200/acpi/superio.asl D src/mainboard/biostar/a68n_5200/acpi/thermal.asl D src/mainboard/biostar/a68n_5200/acpi/usb_oc.asl D src/mainboard/biostar/a68n_5200/acpi_tables.c D src/mainboard/biostar/a68n_5200/board_info.txt D src/mainboard/biostar/a68n_5200/buildOpts.c D src/mainboard/biostar/a68n_5200/cmos.layout D src/mainboard/biostar/a68n_5200/devicetree.cb D src/mainboard/biostar/a68n_5200/dsdt.asl D src/mainboard/biostar/a68n_5200/irq_tables.c D src/mainboard/biostar/a68n_5200/mainboard.c D src/mainboard/biostar/a68n_5200/mptable.c D src/mainboard/biostar/a68n_5200/romstage.c M src/mainboard/biostar/am1ml/BiosCallOuts.c D src/mainboard/elmex/Kconfig D src/mainboard/elmex/Kconfig.name D src/mainboard/elmex/pcm205400/BiosCallOuts.c D src/mainboard/elmex/pcm205400/Kconfig D src/mainboard/elmex/pcm205400/Kconfig.name D src/mainboard/elmex/pcm205400/Makefile.inc D src/mainboard/elmex/pcm205400/OemCustomize.c D src/mainboard/elmex/pcm205400/OptionsIds.h D src/mainboard/elmex/pcm205400/acpi/gpe.asl D src/mainboard/elmex/pcm205400/acpi/ide.asl D src/mainboard/elmex/pcm205400/acpi/mainboard.asl D src/mainboard/elmex/pcm205400/acpi/routing.asl D src/mainboard/elmex/pcm205400/acpi/sata.asl D src/mainboard/elmex/pcm205400/acpi/sleep.asl D src/mainboard/elmex/pcm205400/acpi/superio.asl D src/mainboard/elmex/pcm205400/acpi/usb_oc.asl D src/mainboard/elmex/pcm205400/acpi_tables.c D src/mainboard/elmex/pcm205400/board_info.txt D src/mainboard/elmex/pcm205400/buildOpts.c D src/mainboard/elmex/pcm205400/cmos.layout D src/mainboard/elmex/pcm205400/devicetree.cb D src/mainboard/elmex/pcm205400/dsdt.asl D src/mainboard/elmex/pcm205400/irq_tables.c D src/mainboard/elmex/pcm205400/mainboard.c D src/mainboard/elmex/pcm205400/mptable.c D src/mainboard/elmex/pcm205400/platform_cfg.h D src/mainboard/elmex/pcm205400/romstage.c D src/mainboard/elmex/pcm205401/Kconfig D src/mainboard/elmex/pcm205401/Kconfig.name D src/mainboard/elmex/pcm205401/board_info.txt M src/mainboard/gizmosphere/gizmo/BiosCallOuts.c M src/mainboard/gizmosphere/gizmo/platform_cfg.h D src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c D src/mainboard/gizmosphere/gizmo2/Kconfig D src/mainboard/gizmosphere/gizmo2/Kconfig.name D src/mainboard/gizmosphere/gizmo2/Makefile.inc D src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex D src/mainboard/gizmosphere/gizmo2/OemCustomize.c D src/mainboard/gizmosphere/gizmo2/OptionsIds.h D src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl D src/mainboard/gizmosphere/gizmo2/acpi/ide.asl D src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl D src/mainboard/gizmosphere/gizmo2/acpi/routing.asl D src/mainboard/gizmosphere/gizmo2/acpi/sata.asl D src/mainboard/gizmosphere/gizmo2/acpi/si.asl D src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl D src/mainboard/gizmosphere/gizmo2/acpi/superio.asl D src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl D src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl D src/mainboard/gizmosphere/gizmo2/acpi_tables.c D src/mainboard/gizmosphere/gizmo2/board_info.txt D src/mainboard/gizmosphere/gizmo2/buildOpts.c D src/mainboard/gizmosphere/gizmo2/cmos.layout D src/mainboard/gizmosphere/gizmo2/devicetree.cb D src/mainboard/gizmosphere/gizmo2/dsdt.asl D src/mainboard/gizmosphere/gizmo2/irq_tables.c D src/mainboard/gizmosphere/gizmo2/mainboard.c D src/mainboard/gizmosphere/gizmo2/mptable.c D src/mainboard/gizmosphere/gizmo2/romstage.c D src/mainboard/hp/abm/BiosCallOuts.c D src/mainboard/hp/abm/Kconfig D src/mainboard/hp/abm/Kconfig.name D src/mainboard/hp/abm/Makefile.inc D src/mainboard/hp/abm/OemCustomize.c D src/mainboard/hp/abm/OptionsIds.h D src/mainboard/hp/abm/acpi/gpe.asl D src/mainboard/hp/abm/acpi/ide.asl D src/mainboard/hp/abm/acpi/mainboard.asl D src/mainboard/hp/abm/acpi/routing.asl D src/mainboard/hp/abm/acpi/sata.asl D src/mainboard/hp/abm/acpi/si.asl D src/mainboard/hp/abm/acpi/sleep.asl D src/mainboard/hp/abm/acpi/superio.asl D src/mainboard/hp/abm/acpi/thermal.asl D src/mainboard/hp/abm/acpi/usb_oc.asl D src/mainboard/hp/abm/acpi_tables.c D src/mainboard/hp/abm/board_info.txt D src/mainboard/hp/abm/buildOpts.c D src/mainboard/hp/abm/cmos.layout D src/mainboard/hp/abm/devicetree.cb D src/mainboard/hp/abm/dsdt.asl D src/mainboard/hp/abm/irq_tables.c D src/mainboard/hp/abm/mainboard.c D src/mainboard/hp/abm/mptable.c D src/mainboard/hp/abm/romstage.c D src/mainboard/jetway/Kconfig D src/mainboard/jetway/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c D src/mainboard/jetway/nf81-t56n-lf/Kconfig D src/mainboard/jetway/nf81-t56n-lf/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/Makefile.inc D src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c D src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h D src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/mainboard.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl D src/mainboard/jetway/nf81-t56n-lf/acpi_tables.c D src/mainboard/jetway/nf81-t56n-lf/board_info.txt D src/mainboard/jetway/nf81-t56n-lf/buildOpts.c D src/mainboard/jetway/nf81-t56n-lf/cmos.layout D src/mainboard/jetway/nf81-t56n-lf/devicetree.cb D src/mainboard/jetway/nf81-t56n-lf/dsdt.asl D src/mainboard/jetway/nf81-t56n-lf/irq_tables.c D src/mainboard/jetway/nf81-t56n-lf/mainboard.c D src/mainboard/jetway/nf81-t56n-lf/mptable.c D src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h D src/mainboard/jetway/nf81-t56n-lf/romstage.c D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb.asl D src/mainboard/lippert/frontrunner-af/acpi_tables.c D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/mptable.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/romstage.c D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/toucan-af/BiosCallOuts.c D src/mainboard/lippert/toucan-af/Kconfig D src/mainboard/lippert/toucan-af/Kconfig.name D src/mainboard/lippert/toucan-af/Makefile.inc D src/mainboard/lippert/toucan-af/OemCustomize.c D src/mainboard/lippert/toucan-af/OptionsIds.h D src/mainboard/lippert/toucan-af/acpi/routing.asl D src/mainboard/lippert/toucan-af/acpi/sata.asl D src/mainboard/lippert/toucan-af/acpi/superio.asl D src/mainboard/lippert/toucan-af/acpi/usb.asl D src/mainboard/lippert/toucan-af/acpi_tables.c D src/mainboard/lippert/toucan-af/board_info.txt D src/mainboard/lippert/toucan-af/buildOpts.c D src/mainboard/lippert/toucan-af/cmos.layout D src/mainboard/lippert/toucan-af/devicetree.cb D src/mainboard/lippert/toucan-af/dsdt.asl D src/mainboard/lippert/toucan-af/irq_tables.c D src/mainboard/lippert/toucan-af/mainboard.c D src/mainboard/lippert/toucan-af/mptable.c D src/mainboard/lippert/toucan-af/platform_cfg.h D src/mainboard/lippert/toucan-af/romstage.c M src/mainboard/msi/ms7721/mainboard.c M src/mainboard/pcengines/apu1/BiosCallOuts.c M src/mainboard/pcengines/apu1/platform_cfg.h 493 files changed, 1 insertion(+), 50,102 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/38358/3
Mike Banon has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 3:
Patch Set 2: Code-Review-2
As I told in some (now abandoned) commit comments, I am going to land some changes prior to any board removals. Also I showed green light to Mike that he can move board to !ROMCC_BOOTBLOCK if he wishes to do so.
There is mailing list thread setting new deadlines to February, there ie no point rebasing this change until that.
What should I do regarding the "switch away from ROMCC_BOOTBLOCK" changes by Haouas that have been abandoned by him but seemed to build fine? Could I reupload them? (I have these diffs saved). If I remember correctly, only like 5 boards couldn't be switched away successfully.
HAOUAS Elyes has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 3:
Patch Set 3:
Patch Set 2: Code-Review-2
As I told in some (now abandoned) commit comments, I am going to land some changes prior to any board removals. Also I showed green light to Mike that he can move board to !ROMCC_BOOTBLOCK if he wishes to do so.
There is mailing list thread setting new deadlines to February, there ie no point rebasing this change until that.
What should I do regarding the "switch away from ROMCC_BOOTBLOCK" changes by Haouas that have been abandoned by him but seemed to build fine? Could I reupload them? (I have these diffs saved). If I remember correctly, only like 5 boards couldn't be switched away successfully.
Changes are here : https://review.coreboot.org/q/owner:ehaouas%2540noos.fr+status:abandoned+rom... But the main question is how will you test those unmaintained mainboards? do you have those boards?
Mike Banon has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 3:
Patch Set 3:
But the main question is how will you test those unmaintained mainboards? do you have those boards?
Sadly I don't have them, but this "switch away from ROMCC" change is pretty straightforward and I got it right at my first attempt for two other boards which I have. So if these boards worked before this "switch away", most likely they will work after. I don't know if they work at the moment - but the people who are looking to get a coreboot board, will see that a board status of these is pretty old and would pick another. However, those who just happen to already have a board like this Biostar or Jetway, will see that this board is coreboot-supported, could give it a try and maybe join our coreboot community. If we drop them simply because unmaintained, we lose these potential newcomers.
Kyösti Mälkki has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 3:
Patch Set 2:
Patch Set 2: Code-Review-2
As I told in some (now abandoned) commit comments, I am going to land some changes prior to any board removals. Also I showed green light to Mike that he can move board to !ROMCC_BOOTBLOCK if he wishes to do so.
There is mailing list thread setting new deadlines to February, there ie no point rebasing this change until that.
Are you sure the mailing list was included? Was there anything after the "last calls"? (where you set a February deadline for three boards that don't show up here)
No, there was no mail besides the one you refer to. It was clear from that message that I wanted to drop those boards and I was not going to make the changes without testers. But lack of board-status was never part of the announced release requirements and Mike wanted to keep these regardless. With the work "Switch away from ROMCC_BOOTBLOCK" in the review queue already, I don't want to thrash the work of volunteer.
All the urgency with the deadlines was for util/romcc and arch/x86 cleanup to proceed and we accomplished that already. I am going to allow "Switch away from ROMCC bootblock" changes go in untested, just need to find motivation and time to review those later January if they still rebase cleanly.
HAOUAS Elyes has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 3:
Patch Set 3:
Patch Set 2:
Patch Set 2: Code-Review-2
As I told in some (now abandoned) commit comments, I am going to land some changes prior to any board removals. Also I showed green light to Mike that he can move board to !ROMCC_BOOTBLOCK if he wishes to do so.
There is mailing list thread setting new deadlines to February, there ie no point rebasing this change until that.
Are you sure the mailing list was included? Was there anything after the "last calls"? (where you set a February deadline for three boards that don't show up here)
No, there was no mail besides the one you refer to. It was clear from that message that I wanted to drop those boards and I was not going to make the changes without testers. But lack of board-status was never part of the announced release requirements and Mike wanted to keep these regardless. With the work "Switch away from ROMCC_BOOTBLOCK" in the review queue already, I don't want to thrash the work of volunteer.
All the urgency with the deadlines was for util/romcc and arch/x86 cleanup to proceed and we accomplished that already. I am going to allow "Switch away from ROMCC bootblock" changes go in untested, just need to find motivation and time to review those later January if they still rebase cleanly.
ok, I'll restore 'm for review/test.
HAOUAS Elyes has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 3: Code-Review-1
HAOUAS Elyes has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 3:
This change is ready for review.
HAOUAS Elyes has removed a vote from this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Removed Code-Review-1 by HAOUAS Elyes ehaouas@noos.fr
Hello Kyösti Mälkki, Piotr Król, build bot (Jenkins), Nico Huber, Michał Żygowski, Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38358
to look at the new patch set (#4).
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
mainboard: Drop unmaintained ROMCC boards
Remove unmaintained and unsupported old ROMCC boards. Those boards weren't hooked up for build.
Change-Id: I031fd3538787323188f6c5f0d0bba082f6bdee7e Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/adlink/CM2-GF/board_info.txt D src/mainboard/adlink/Kconfig D src/mainboard/adlink/Kconfig.name D src/mainboard/adlink/cExpress-GFR/board_info.txt D src/mainboard/amd/bettong/BiosCallOuts.c D src/mainboard/amd/bettong/BiosCallOuts.h D src/mainboard/amd/bettong/Kconfig D src/mainboard/amd/bettong/Kconfig.name D src/mainboard/amd/bettong/Makefile.inc D src/mainboard/amd/bettong/OemCustomize.c D src/mainboard/amd/bettong/README D src/mainboard/amd/bettong/acpi/carrizo_fch.asl D src/mainboard/amd/bettong/acpi/gpe.asl D src/mainboard/amd/bettong/acpi/mainboard.asl D src/mainboard/amd/bettong/acpi/routing.asl D src/mainboard/amd/bettong/acpi/sleep.asl D src/mainboard/amd/bettong/acpi/usb_oc.asl D src/mainboard/amd/bettong/acpi_tables.c D src/mainboard/amd/bettong/board_info.txt D src/mainboard/amd/bettong/boardid.c D src/mainboard/amd/bettong/cmos.layout D src/mainboard/amd/bettong/devicetree.cb D src/mainboard/amd/bettong/dsdt.asl D src/mainboard/amd/bettong/fchec.c D src/mainboard/amd/bettong/irq_tables.c D src/mainboard/amd/bettong/mainboard.c D src/mainboard/amd/bettong/mptable.c D src/mainboard/amd/bettong/romstage.c D src/mainboard/amd/db-ft3b-lc/BiosCallOuts.c D src/mainboard/amd/db-ft3b-lc/Kconfig D src/mainboard/amd/db-ft3b-lc/Kconfig.name D src/mainboard/amd/db-ft3b-lc/Makefile.inc D src/mainboard/amd/db-ft3b-lc/Memphis_MEM4G16D3EABG.spd.hex D src/mainboard/amd/db-ft3b-lc/OemCustomize.c D src/mainboard/amd/db-ft3b-lc/acpi/gpe.asl D src/mainboard/amd/db-ft3b-lc/acpi/ide.asl D src/mainboard/amd/db-ft3b-lc/acpi/mainboard.asl D src/mainboard/amd/db-ft3b-lc/acpi/routing.asl D src/mainboard/amd/db-ft3b-lc/acpi/si.asl D src/mainboard/amd/db-ft3b-lc/acpi/sleep.asl D src/mainboard/amd/db-ft3b-lc/acpi/thermal.asl D src/mainboard/amd/db-ft3b-lc/acpi/usb_oc.asl D src/mainboard/amd/db-ft3b-lc/acpi_tables.c D src/mainboard/amd/db-ft3b-lc/board_info.txt D src/mainboard/amd/db-ft3b-lc/cmos.layout D src/mainboard/amd/db-ft3b-lc/devicetree.cb D src/mainboard/amd/db-ft3b-lc/dsdt.asl D src/mainboard/amd/db-ft3b-lc/irq_tables.c D src/mainboard/amd/db-ft3b-lc/mainboard.c D src/mainboard/amd/db-ft3b-lc/mptable.c D src/mainboard/amd/db-ft3b-lc/romstage.c D src/mainboard/amd/inagua/BiosCallOuts.c D src/mainboard/amd/inagua/Kconfig D src/mainboard/amd/inagua/Kconfig.name D src/mainboard/amd/inagua/Makefile.inc D src/mainboard/amd/inagua/OemCustomize.c D src/mainboard/amd/inagua/OptionsIds.h D src/mainboard/amd/inagua/acpi/gpe.asl D src/mainboard/amd/inagua/acpi/ide.asl D src/mainboard/amd/inagua/acpi/mainboard.asl D src/mainboard/amd/inagua/acpi/routing.asl D src/mainboard/amd/inagua/acpi/sata.asl D src/mainboard/amd/inagua/acpi/sleep.asl D src/mainboard/amd/inagua/acpi/superio.asl D src/mainboard/amd/inagua/acpi/usb_oc.asl D src/mainboard/amd/inagua/acpi_tables.c D src/mainboard/amd/inagua/board_info.txt D src/mainboard/amd/inagua/buildOpts.c D src/mainboard/amd/inagua/cmos.layout D src/mainboard/amd/inagua/devicetree.cb D src/mainboard/amd/inagua/dsdt.asl D src/mainboard/amd/inagua/irq_tables.c D src/mainboard/amd/inagua/mainboard.c D src/mainboard/amd/inagua/mptable.c D src/mainboard/amd/inagua/platform_cfg.h D src/mainboard/amd/inagua/romstage.c D src/mainboard/amd/lamar/BiosCallOuts.c D src/mainboard/amd/lamar/Kconfig D src/mainboard/amd/lamar/Kconfig.name D src/mainboard/amd/lamar/Makefile.inc D src/mainboard/amd/lamar/OemCustomize.c D src/mainboard/amd/lamar/acpi/gpe.asl D src/mainboard/amd/lamar/acpi/mainboard.asl D src/mainboard/amd/lamar/acpi/routing.asl D src/mainboard/amd/lamar/acpi/si.asl D src/mainboard/amd/lamar/acpi/sleep.asl D src/mainboard/amd/lamar/acpi/thermal.asl D src/mainboard/amd/lamar/acpi/usb_oc.asl D src/mainboard/amd/lamar/acpi_tables.c D src/mainboard/amd/lamar/board_info.txt D src/mainboard/amd/lamar/cmos.layout D src/mainboard/amd/lamar/devicetree.cb D src/mainboard/amd/lamar/dsdt.asl D src/mainboard/amd/lamar/irq_tables.c D src/mainboard/amd/lamar/mainboard.c D src/mainboard/amd/lamar/mptable.c D src/mainboard/amd/lamar/romstage.c D src/mainboard/amd/olivehill/BiosCallOuts.c D src/mainboard/amd/olivehill/Kconfig D src/mainboard/amd/olivehill/Kconfig.name D src/mainboard/amd/olivehill/Makefile.inc D src/mainboard/amd/olivehill/OemCustomize.c D src/mainboard/amd/olivehill/OptionsIds.h D src/mainboard/amd/olivehill/acpi/gpe.asl D src/mainboard/amd/olivehill/acpi/ide.asl D src/mainboard/amd/olivehill/acpi/mainboard.asl D src/mainboard/amd/olivehill/acpi/routing.asl D src/mainboard/amd/olivehill/acpi/sata.asl D src/mainboard/amd/olivehill/acpi/si.asl D src/mainboard/amd/olivehill/acpi/sleep.asl D src/mainboard/amd/olivehill/acpi/superio.asl D src/mainboard/amd/olivehill/acpi/thermal.asl D src/mainboard/amd/olivehill/acpi/usb_oc.asl D src/mainboard/amd/olivehill/acpi_tables.c D src/mainboard/amd/olivehill/board_info.txt D src/mainboard/amd/olivehill/buildOpts.c D src/mainboard/amd/olivehill/cmos.layout D src/mainboard/amd/olivehill/devicetree.cb D src/mainboard/amd/olivehill/dsdt.asl D src/mainboard/amd/olivehill/irq_tables.c D src/mainboard/amd/olivehill/mainboard.c D src/mainboard/amd/olivehill/mptable.c D src/mainboard/amd/olivehill/romstage.c D src/mainboard/amd/olivehillplus/BiosCallOuts.c D src/mainboard/amd/olivehillplus/Kconfig D src/mainboard/amd/olivehillplus/Kconfig.name D src/mainboard/amd/olivehillplus/Makefile.inc D src/mainboard/amd/olivehillplus/OemCustomize.c D src/mainboard/amd/olivehillplus/acpi/gpe.asl D src/mainboard/amd/olivehillplus/acpi/ide.asl D src/mainboard/amd/olivehillplus/acpi/mainboard.asl D src/mainboard/amd/olivehillplus/acpi/routing.asl D src/mainboard/amd/olivehillplus/acpi/si.asl D src/mainboard/amd/olivehillplus/acpi/sleep.asl D src/mainboard/amd/olivehillplus/acpi/thermal.asl D src/mainboard/amd/olivehillplus/acpi/usb_oc.asl D src/mainboard/amd/olivehillplus/acpi_tables.c D src/mainboard/amd/olivehillplus/board_info.txt D src/mainboard/amd/olivehillplus/cmos.layout D src/mainboard/amd/olivehillplus/devicetree.cb D src/mainboard/amd/olivehillplus/dsdt.asl D src/mainboard/amd/olivehillplus/irq_tables.c D src/mainboard/amd/olivehillplus/mainboard.c D src/mainboard/amd/olivehillplus/mptable.c D src/mainboard/amd/olivehillplus/romstage.c D src/mainboard/amd/parmer/BiosCallOuts.c D src/mainboard/amd/parmer/Kconfig D src/mainboard/amd/parmer/Kconfig.name D src/mainboard/amd/parmer/Makefile.inc D src/mainboard/amd/parmer/OemCustomize.c D src/mainboard/amd/parmer/OptionsIds.h D src/mainboard/amd/parmer/acpi/gpe.asl D src/mainboard/amd/parmer/acpi/mainboard.asl D src/mainboard/amd/parmer/acpi/routing.asl D src/mainboard/amd/parmer/acpi/sata.asl D src/mainboard/amd/parmer/acpi/si.asl D src/mainboard/amd/parmer/acpi/sleep.asl D src/mainboard/amd/parmer/acpi/superio.asl D src/mainboard/amd/parmer/acpi/thermal.asl D src/mainboard/amd/parmer/acpi/usb_oc.asl D src/mainboard/amd/parmer/acpi_tables.c D src/mainboard/amd/parmer/board_info.txt D src/mainboard/amd/parmer/buildOpts.c D src/mainboard/amd/parmer/cmos.layout D src/mainboard/amd/parmer/devicetree.cb D src/mainboard/amd/parmer/dsdt.asl D src/mainboard/amd/parmer/irq_tables.c D src/mainboard/amd/parmer/mainboard.c D src/mainboard/amd/parmer/mptable.c D src/mainboard/amd/parmer/romstage.c D src/mainboard/amd/persimmon/BiosCallOuts.c D src/mainboard/amd/persimmon/Kconfig D src/mainboard/amd/persimmon/Kconfig.name D src/mainboard/amd/persimmon/Makefile.inc D src/mainboard/amd/persimmon/OemCustomize.c D src/mainboard/amd/persimmon/OptionsIds.h D src/mainboard/amd/persimmon/acpi/gpe.asl D src/mainboard/amd/persimmon/acpi/ide.asl D src/mainboard/amd/persimmon/acpi/mainboard.asl D src/mainboard/amd/persimmon/acpi/routing.asl D src/mainboard/amd/persimmon/acpi/sata.asl D src/mainboard/amd/persimmon/acpi/sleep.asl D src/mainboard/amd/persimmon/acpi/superio.asl D src/mainboard/amd/persimmon/acpi/usb_oc.asl D src/mainboard/amd/persimmon/acpi_tables.c D src/mainboard/amd/persimmon/board_info.txt D src/mainboard/amd/persimmon/buildOpts.c D src/mainboard/amd/persimmon/cmos.layout D src/mainboard/amd/persimmon/devicetree.cb D src/mainboard/amd/persimmon/dsdt.asl D src/mainboard/amd/persimmon/irq_tables.c D src/mainboard/amd/persimmon/mainboard.c D src/mainboard/amd/persimmon/mptable.c D src/mainboard/amd/persimmon/platform_cfg.h D src/mainboard/amd/persimmon/romstage.c D src/mainboard/amd/south_station/BiosCallOuts.c D src/mainboard/amd/south_station/Kconfig D src/mainboard/amd/south_station/Kconfig.name D src/mainboard/amd/south_station/Makefile.inc D src/mainboard/amd/south_station/OemCustomize.c D src/mainboard/amd/south_station/OptionsIds.h D src/mainboard/amd/south_station/acpi/gpe.asl D src/mainboard/amd/south_station/acpi/ide.asl D src/mainboard/amd/south_station/acpi/mainboard.asl D src/mainboard/amd/south_station/acpi/routing.asl D src/mainboard/amd/south_station/acpi/sata.asl D src/mainboard/amd/south_station/acpi/sleep.asl D src/mainboard/amd/south_station/acpi/superio.asl D src/mainboard/amd/south_station/acpi/usb_oc.asl D src/mainboard/amd/south_station/acpi_tables.c D src/mainboard/amd/south_station/board_info.txt D src/mainboard/amd/south_station/buildOpts.c D src/mainboard/amd/south_station/cmos.layout D src/mainboard/amd/south_station/devicetree.cb D src/mainboard/amd/south_station/dsdt.asl D src/mainboard/amd/south_station/irq_tables.c D src/mainboard/amd/south_station/mainboard.c D src/mainboard/amd/south_station/mptable.c D src/mainboard/amd/south_station/platform_cfg.h D src/mainboard/amd/south_station/romstage.c D src/mainboard/amd/thatcher/BiosCallOuts.c D src/mainboard/amd/thatcher/Kconfig D src/mainboard/amd/thatcher/Kconfig.name D src/mainboard/amd/thatcher/Makefile.inc D src/mainboard/amd/thatcher/OemCustomize.c D src/mainboard/amd/thatcher/OptionsIds.h D src/mainboard/amd/thatcher/acpi/cpstate.asl D src/mainboard/amd/thatcher/acpi/gpe.asl D src/mainboard/amd/thatcher/acpi/mainboard.asl D src/mainboard/amd/thatcher/acpi/routing.asl D src/mainboard/amd/thatcher/acpi/sata.asl D src/mainboard/amd/thatcher/acpi/si.asl D src/mainboard/amd/thatcher/acpi/sleep.asl D src/mainboard/amd/thatcher/acpi/superio.asl D src/mainboard/amd/thatcher/acpi/thermal.asl D src/mainboard/amd/thatcher/acpi/usb_oc.asl D src/mainboard/amd/thatcher/acpi_tables.c D src/mainboard/amd/thatcher/board_info.txt D src/mainboard/amd/thatcher/buildOpts.c D src/mainboard/amd/thatcher/cmos.layout D src/mainboard/amd/thatcher/devicetree.cb D src/mainboard/amd/thatcher/dsdt.asl D src/mainboard/amd/thatcher/irq_tables.c D src/mainboard/amd/thatcher/mainboard.c D src/mainboard/amd/thatcher/mptable.c D src/mainboard/amd/thatcher/romstage.c D src/mainboard/amd/union_station/BiosCallOuts.c D src/mainboard/amd/union_station/Kconfig D src/mainboard/amd/union_station/Kconfig.name D src/mainboard/amd/union_station/Makefile.inc D src/mainboard/amd/union_station/OemCustomize.c D src/mainboard/amd/union_station/OptionsIds.h D src/mainboard/amd/union_station/acpi/gpe.asl D src/mainboard/amd/union_station/acpi/ide.asl D src/mainboard/amd/union_station/acpi/mainboard.asl D src/mainboard/amd/union_station/acpi/routing.asl D src/mainboard/amd/union_station/acpi/sata.asl D src/mainboard/amd/union_station/acpi/sleep.asl D src/mainboard/amd/union_station/acpi/superio.asl D src/mainboard/amd/union_station/acpi/usb_oc.asl D src/mainboard/amd/union_station/acpi_tables.c D src/mainboard/amd/union_station/board_info.txt D src/mainboard/amd/union_station/buildOpts.c D src/mainboard/amd/union_station/cmos.layout D src/mainboard/amd/union_station/devicetree.cb D src/mainboard/amd/union_station/dsdt.asl D src/mainboard/amd/union_station/irq_tables.c D src/mainboard/amd/union_station/mainboard.c D src/mainboard/amd/union_station/mptable.c D src/mainboard/amd/union_station/platform_cfg.h D src/mainboard/amd/union_station/romstage.c M src/mainboard/asrock/e350m1/platform_cfg.h D src/mainboard/bap/Kconfig D src/mainboard/bap/Kconfig.name D src/mainboard/bap/ode_e20XX/BAP_Q7_1066.spd.hex D src/mainboard/bap/ode_e20XX/BAP_Q7_800.spd.hex D src/mainboard/bap/ode_e20XX/BiosCallOuts.c D src/mainboard/bap/ode_e20XX/Kconfig D src/mainboard/bap/ode_e20XX/Kconfig.name D src/mainboard/bap/ode_e20XX/Makefile.inc D src/mainboard/bap/ode_e20XX/OemCustomize.c D src/mainboard/bap/ode_e20XX/OptionsIds.h D src/mainboard/bap/ode_e20XX/acpi/gpe.asl D src/mainboard/bap/ode_e20XX/acpi/ide.asl D src/mainboard/bap/ode_e20XX/acpi/mainboard.asl D src/mainboard/bap/ode_e20XX/acpi/routing.asl D src/mainboard/bap/ode_e20XX/acpi/sata.asl D src/mainboard/bap/ode_e20XX/acpi/si.asl D src/mainboard/bap/ode_e20XX/acpi/sleep.asl D src/mainboard/bap/ode_e20XX/acpi/superio.asl D src/mainboard/bap/ode_e20XX/acpi/thermal.asl D src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl D src/mainboard/bap/ode_e20XX/acpi_tables.c D src/mainboard/bap/ode_e20XX/board_info.txt D src/mainboard/bap/ode_e20XX/buildOpts.c D src/mainboard/bap/ode_e20XX/cmos.layout D src/mainboard/bap/ode_e20XX/devicetree.cb D src/mainboard/bap/ode_e20XX/dsdt.asl D src/mainboard/bap/ode_e20XX/irq_tables.c D src/mainboard/bap/ode_e20XX/mainboard.c D src/mainboard/bap/ode_e20XX/mptable.c D src/mainboard/bap/ode_e20XX/romstage.c D src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex D src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex D src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex D src/mainboard/bap/ode_e21XX/BiosCallOuts.c D src/mainboard/bap/ode_e21XX/Kconfig D src/mainboard/bap/ode_e21XX/Kconfig.name D src/mainboard/bap/ode_e21XX/Makefile.inc D src/mainboard/bap/ode_e21XX/OemCustomize.c D src/mainboard/bap/ode_e21XX/acpi/gpe.asl D src/mainboard/bap/ode_e21XX/acpi/ide.asl D src/mainboard/bap/ode_e21XX/acpi/mainboard.asl D src/mainboard/bap/ode_e21XX/acpi/routing.asl D src/mainboard/bap/ode_e21XX/acpi/si.asl D src/mainboard/bap/ode_e21XX/acpi/sleep.asl D src/mainboard/bap/ode_e21XX/acpi/superio.asl D src/mainboard/bap/ode_e21XX/acpi/thermal.asl D src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl D src/mainboard/bap/ode_e21XX/acpi_tables.c D src/mainboard/bap/ode_e21XX/board_info.txt D src/mainboard/bap/ode_e21XX/cmos.layout D src/mainboard/bap/ode_e21XX/devicetree.cb D src/mainboard/bap/ode_e21XX/dsdt.asl D src/mainboard/bap/ode_e21XX/irq_tables.c D src/mainboard/bap/ode_e21XX/mainboard.c D src/mainboard/bap/ode_e21XX/mptable.c D src/mainboard/bap/ode_e21XX/romstage.c D src/mainboard/elmex/Kconfig D src/mainboard/elmex/Kconfig.name D src/mainboard/elmex/pcm205400/BiosCallOuts.c D src/mainboard/elmex/pcm205400/Kconfig D src/mainboard/elmex/pcm205400/Kconfig.name D src/mainboard/elmex/pcm205400/Makefile.inc D src/mainboard/elmex/pcm205400/OemCustomize.c D src/mainboard/elmex/pcm205400/OptionsIds.h D src/mainboard/elmex/pcm205400/acpi/gpe.asl D src/mainboard/elmex/pcm205400/acpi/ide.asl D src/mainboard/elmex/pcm205400/acpi/mainboard.asl D src/mainboard/elmex/pcm205400/acpi/routing.asl D src/mainboard/elmex/pcm205400/acpi/sata.asl D src/mainboard/elmex/pcm205400/acpi/sleep.asl D src/mainboard/elmex/pcm205400/acpi/superio.asl D src/mainboard/elmex/pcm205400/acpi/usb_oc.asl D src/mainboard/elmex/pcm205400/acpi_tables.c D src/mainboard/elmex/pcm205400/board_info.txt D src/mainboard/elmex/pcm205400/buildOpts.c D src/mainboard/elmex/pcm205400/cmos.layout D src/mainboard/elmex/pcm205400/devicetree.cb D src/mainboard/elmex/pcm205400/dsdt.asl D src/mainboard/elmex/pcm205400/irq_tables.c D src/mainboard/elmex/pcm205400/mainboard.c D src/mainboard/elmex/pcm205400/mptable.c D src/mainboard/elmex/pcm205400/platform_cfg.h D src/mainboard/elmex/pcm205400/romstage.c D src/mainboard/elmex/pcm205401/Kconfig D src/mainboard/elmex/pcm205401/Kconfig.name D src/mainboard/elmex/pcm205401/board_info.txt M src/mainboard/gizmosphere/gizmo/platform_cfg.h D src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c D src/mainboard/gizmosphere/gizmo2/Kconfig D src/mainboard/gizmosphere/gizmo2/Kconfig.name D src/mainboard/gizmosphere/gizmo2/Makefile.inc D src/mainboard/gizmosphere/gizmo2/Micron_MT41J128M16JT.spd.hex D src/mainboard/gizmosphere/gizmo2/OemCustomize.c D src/mainboard/gizmosphere/gizmo2/OptionsIds.h D src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl D src/mainboard/gizmosphere/gizmo2/acpi/ide.asl D src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl D src/mainboard/gizmosphere/gizmo2/acpi/routing.asl D src/mainboard/gizmosphere/gizmo2/acpi/sata.asl D src/mainboard/gizmosphere/gizmo2/acpi/si.asl D src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl D src/mainboard/gizmosphere/gizmo2/acpi/superio.asl D src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl D src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl D src/mainboard/gizmosphere/gizmo2/acpi_tables.c D src/mainboard/gizmosphere/gizmo2/board_info.txt D src/mainboard/gizmosphere/gizmo2/buildOpts.c D src/mainboard/gizmosphere/gizmo2/cmos.layout D src/mainboard/gizmosphere/gizmo2/devicetree.cb D src/mainboard/gizmosphere/gizmo2/dsdt.asl D src/mainboard/gizmosphere/gizmo2/irq_tables.c D src/mainboard/gizmosphere/gizmo2/mainboard.c D src/mainboard/gizmosphere/gizmo2/mptable.c D src/mainboard/gizmosphere/gizmo2/romstage.c D src/mainboard/hp/abm/BiosCallOuts.c D src/mainboard/hp/abm/Kconfig D src/mainboard/hp/abm/Kconfig.name D src/mainboard/hp/abm/Makefile.inc D src/mainboard/hp/abm/OemCustomize.c D src/mainboard/hp/abm/OptionsIds.h D src/mainboard/hp/abm/acpi/gpe.asl D src/mainboard/hp/abm/acpi/ide.asl D src/mainboard/hp/abm/acpi/mainboard.asl D src/mainboard/hp/abm/acpi/routing.asl D src/mainboard/hp/abm/acpi/sata.asl D src/mainboard/hp/abm/acpi/si.asl D src/mainboard/hp/abm/acpi/sleep.asl D src/mainboard/hp/abm/acpi/superio.asl D src/mainboard/hp/abm/acpi/thermal.asl D src/mainboard/hp/abm/acpi/usb_oc.asl D src/mainboard/hp/abm/acpi_tables.c D src/mainboard/hp/abm/board_info.txt D src/mainboard/hp/abm/buildOpts.c D src/mainboard/hp/abm/cmos.layout D src/mainboard/hp/abm/devicetree.cb D src/mainboard/hp/abm/dsdt.asl D src/mainboard/hp/abm/irq_tables.c D src/mainboard/hp/abm/mainboard.c D src/mainboard/hp/abm/mptable.c D src/mainboard/hp/abm/romstage.c D src/mainboard/jetway/Kconfig D src/mainboard/jetway/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c D src/mainboard/jetway/nf81-t56n-lf/Kconfig D src/mainboard/jetway/nf81-t56n-lf/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/Makefile.inc D src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c D src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h D src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/mainboard.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl D src/mainboard/jetway/nf81-t56n-lf/acpi_tables.c D src/mainboard/jetway/nf81-t56n-lf/board_info.txt D src/mainboard/jetway/nf81-t56n-lf/buildOpts.c D src/mainboard/jetway/nf81-t56n-lf/cmos.layout D src/mainboard/jetway/nf81-t56n-lf/devicetree.cb D src/mainboard/jetway/nf81-t56n-lf/dsdt.asl D src/mainboard/jetway/nf81-t56n-lf/irq_tables.c D src/mainboard/jetway/nf81-t56n-lf/mainboard.c D src/mainboard/jetway/nf81-t56n-lf/mptable.c D src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h D src/mainboard/jetway/nf81-t56n-lf/romstage.c D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb.asl D src/mainboard/lippert/frontrunner-af/acpi_tables.c D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/mptable.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/romstage.c D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/toucan-af/BiosCallOuts.c D src/mainboard/lippert/toucan-af/Kconfig D src/mainboard/lippert/toucan-af/Kconfig.name D src/mainboard/lippert/toucan-af/Makefile.inc D src/mainboard/lippert/toucan-af/OemCustomize.c D src/mainboard/lippert/toucan-af/OptionsIds.h D src/mainboard/lippert/toucan-af/acpi/routing.asl D src/mainboard/lippert/toucan-af/acpi/sata.asl D src/mainboard/lippert/toucan-af/acpi/superio.asl D src/mainboard/lippert/toucan-af/acpi/usb.asl D src/mainboard/lippert/toucan-af/acpi_tables.c D src/mainboard/lippert/toucan-af/board_info.txt D src/mainboard/lippert/toucan-af/buildOpts.c D src/mainboard/lippert/toucan-af/cmos.layout D src/mainboard/lippert/toucan-af/devicetree.cb D src/mainboard/lippert/toucan-af/dsdt.asl D src/mainboard/lippert/toucan-af/irq_tables.c D src/mainboard/lippert/toucan-af/mainboard.c D src/mainboard/lippert/toucan-af/mptable.c D src/mainboard/lippert/toucan-af/platform_cfg.h D src/mainboard/lippert/toucan-af/romstage.c M src/mainboard/pcengines/apu1/platform_cfg.h M util/lint/check_lint_tests M util/lint/lint-extended-007-checkpatch 487 files changed, 1 insertion(+), 49,398 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/38358/4
build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Patch Set 4:
(1 comment)
https://review.coreboot.org/c/coreboot/+/38358/4/util/lint/check_lint_tests File util/lint/check_lint_tests:
https://review.coreboot.org/c/coreboot/+/38358/4/util/lint/check_lint_tests@... PS4, Line 29: sed -i "s/for more details./for more details.\n * You${SPACE}should${SPACE}have received a copy of the GNU General Public License\n * along with this program; if not, write to the Free Software\n * Foundation, Inc./" ${TESTFILE009} Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL.
HAOUAS Elyes has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Abandoned
boring
HAOUAS Elyes has restored this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC boards ......................................................................
Restored
Hello Kyösti Mälkki, Piotr Król, build bot (Jenkins), Nico Huber, Michał Żygowski, Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38358
to look at the new patch set (#5).
Change subject: mainboard: Drop unmaintained ROMCC {adlink,lippert} ......................................................................
mainboard: Drop unmaintained ROMCC {adlink,lippert}
Remove unmaintained and unsupported old ROMCC boards. Those boards weren't hooked up for build.
Change-Id: I031fd3538787323188f6c5f0d0bba082f6bdee7e Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/adlink/CM2-GF/board_info.txt D src/mainboard/adlink/Kconfig D src/mainboard/adlink/Kconfig.name D src/mainboard/adlink/cExpress-GFR/board_info.txt D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb.asl D src/mainboard/lippert/frontrunner-af/acpi_tables.c D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/mptable.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/romstage.c D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/toucan-af/BiosCallOuts.c D src/mainboard/lippert/toucan-af/Kconfig D src/mainboard/lippert/toucan-af/Kconfig.name D src/mainboard/lippert/toucan-af/Makefile.inc D src/mainboard/lippert/toucan-af/OemCustomize.c D src/mainboard/lippert/toucan-af/OptionsIds.h D src/mainboard/lippert/toucan-af/acpi/routing.asl D src/mainboard/lippert/toucan-af/acpi/sata.asl D src/mainboard/lippert/toucan-af/acpi/superio.asl D src/mainboard/lippert/toucan-af/acpi/usb.asl D src/mainboard/lippert/toucan-af/acpi_tables.c D src/mainboard/lippert/toucan-af/board_info.txt D src/mainboard/lippert/toucan-af/buildOpts.c D src/mainboard/lippert/toucan-af/cmos.layout D src/mainboard/lippert/toucan-af/devicetree.cb D src/mainboard/lippert/toucan-af/dsdt.asl D src/mainboard/lippert/toucan-af/irq_tables.c D src/mainboard/lippert/toucan-af/mainboard.c D src/mainboard/lippert/toucan-af/mptable.c D src/mainboard/lippert/toucan-af/platform_cfg.h D src/mainboard/lippert/toucan-af/romstage.c M util/lint/check_lint_tests M util/lint/lint-extended-007-checkpatch 52 files changed, 1 insertion(+), 8,031 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/38358/5
build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mainboard: Drop unmaintained ROMCC {adlink,lippert} ......................................................................
Patch Set 5:
(1 comment)
https://review.coreboot.org/c/coreboot/+/38358/5/util/lint/check_lint_tests File util/lint/check_lint_tests:
https://review.coreboot.org/c/coreboot/+/38358/5/util/lint/check_lint_tests@... PS5, Line 29: sed -i "s/for more details./for more details.\n * You${SPACE}should${SPACE}have received a copy of the GNU General Public License\n * along with this program; if not, write to the Free Software\n * Foundation, Inc./" ${TESTFILE009} Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL.
Hello Kyösti Mälkki, Piotr Król, build bot (Jenkins), Nico Huber, Michał Żygowski, Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38358
to look at the new patch set (#6).
Change subject: mb/{adlink,lippert}: Drop unmaintained ROMCC ......................................................................
mb/{adlink,lippert}: Drop unmaintained ROMCC
Remove unmaintained and unsupported old ROMCC boards. Those boards weren't hooked up for build.
Change-Id: I031fd3538787323188f6c5f0d0bba082f6bdee7e Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/adlink/CM2-GF/board_info.txt D src/mainboard/adlink/Kconfig D src/mainboard/adlink/Kconfig.name D src/mainboard/adlink/cExpress-GFR/board_info.txt D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb.asl D src/mainboard/lippert/frontrunner-af/acpi_tables.c D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/mptable.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/romstage.c D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/toucan-af/BiosCallOuts.c D src/mainboard/lippert/toucan-af/Kconfig D src/mainboard/lippert/toucan-af/Kconfig.name D src/mainboard/lippert/toucan-af/Makefile.inc D src/mainboard/lippert/toucan-af/OemCustomize.c D src/mainboard/lippert/toucan-af/OptionsIds.h D src/mainboard/lippert/toucan-af/acpi/routing.asl D src/mainboard/lippert/toucan-af/acpi/sata.asl D src/mainboard/lippert/toucan-af/acpi/superio.asl D src/mainboard/lippert/toucan-af/acpi/usb.asl D src/mainboard/lippert/toucan-af/acpi_tables.c D src/mainboard/lippert/toucan-af/board_info.txt D src/mainboard/lippert/toucan-af/buildOpts.c D src/mainboard/lippert/toucan-af/cmos.layout D src/mainboard/lippert/toucan-af/devicetree.cb D src/mainboard/lippert/toucan-af/dsdt.asl D src/mainboard/lippert/toucan-af/irq_tables.c D src/mainboard/lippert/toucan-af/mainboard.c D src/mainboard/lippert/toucan-af/mptable.c D src/mainboard/lippert/toucan-af/platform_cfg.h D src/mainboard/lippert/toucan-af/romstage.c M util/lint/check_lint_tests M util/lint/lint-extended-007-checkpatch 52 files changed, 1 insertion(+), 8,031 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/38358/6
Hello Kyösti Mälkki, Piotr Król, build bot (Jenkins), Nico Huber, Michał Żygowski, Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38358
to look at the new patch set (#7).
Change subject: mb/{adlink,lippert}: Drop unmaintained ROMCC board ......................................................................
mb/{adlink,lippert}: Drop unmaintained ROMCC board
Remove unmaintained and unsupported old ROMCC boards. Those boards weren't hooked up for build.
Change-Id: I031fd3538787323188f6c5f0d0bba082f6bdee7e Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- D src/mainboard/adlink/CM2-GF/board_info.txt D src/mainboard/adlink/Kconfig D src/mainboard/adlink/Kconfig.name D src/mainboard/adlink/cExpress-GFR/board_info.txt D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb.asl D src/mainboard/lippert/frontrunner-af/acpi_tables.c D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/mptable.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/romstage.c D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/toucan-af/BiosCallOuts.c D src/mainboard/lippert/toucan-af/Kconfig D src/mainboard/lippert/toucan-af/Kconfig.name D src/mainboard/lippert/toucan-af/Makefile.inc D src/mainboard/lippert/toucan-af/OemCustomize.c D src/mainboard/lippert/toucan-af/OptionsIds.h D src/mainboard/lippert/toucan-af/acpi/routing.asl D src/mainboard/lippert/toucan-af/acpi/sata.asl D src/mainboard/lippert/toucan-af/acpi/superio.asl D src/mainboard/lippert/toucan-af/acpi/usb.asl D src/mainboard/lippert/toucan-af/acpi_tables.c D src/mainboard/lippert/toucan-af/board_info.txt D src/mainboard/lippert/toucan-af/buildOpts.c D src/mainboard/lippert/toucan-af/cmos.layout D src/mainboard/lippert/toucan-af/devicetree.cb D src/mainboard/lippert/toucan-af/dsdt.asl D src/mainboard/lippert/toucan-af/irq_tables.c D src/mainboard/lippert/toucan-af/mainboard.c D src/mainboard/lippert/toucan-af/mptable.c D src/mainboard/lippert/toucan-af/platform_cfg.h D src/mainboard/lippert/toucan-af/romstage.c M util/lint/check_lint_tests M util/lint/lint-extended-007-checkpatch 52 files changed, 1 insertion(+), 8,031 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/38358/7
HAOUAS Elyes has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/38358 )
Change subject: mb/{adlink,lippert}: Drop unmaintained ROMCC board ......................................................................
Abandoned
-
build bot (Jenkins) (Code Review) -
HAOUAS Elyes (Code Review)
-
Kyösti Mälkki (Code Review)
-
Mike Banon (Code Review)
-
Nico Huber (Code Review)