Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4240
-gerrit
commit ff906f45d591fecf0a1e89e55004385ba7d0e889 Author: Gabe Black gabeblack@google.com Date: Wed Apr 24 03:16:21 2013 -0700
Make elog_shrink not depend on having seperate memory/flash descriptors.
The way elog_shrink currently works is that it completely clears the data in the flash/flash descriptor and then recreates it using the part of the log it's going to keep as stored in the memory descriptor. That scheme depends on there being to independent copies of the log.
This change reworks elog_shrink so that it moves the data it wants to keep within a single descriptor and then propogates it to the other and to flash intact. This way, when one of the descriptors goes away, all we have to do is remove the code that would update it.
Built and booted into ChromeOS on Link. Ran mosys eventlog list. Added 2000 events to the log and ran mosys eventlog list again. Echoed a 1 into /sys/firmware/gsmi/clear_eventlog and ran mosys eventlog list. BRANCH=None
Change-Id: I50d77a4f00ea3c6b3e0ec8996dab1a3b31580205 Signed-off-by: Gabe Black gabeblack@google.com Reviewed-on: https://gerrit.chromium.org/gerrit/49305 Reviewed-by: Duncan Laurie dlaurie@chromium.org Commit-Queue: Gabe Black gabeblack@chromium.org Tested-by: Gabe Black gabeblack@chromium.org --- src/drivers/elog/elog.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/src/drivers/elog/elog.c b/src/drivers/elog/elog.c index fd638a5..ab255d8 100644 --- a/src/drivers/elog/elog.c +++ b/src/drivers/elog/elog.c @@ -621,9 +621,11 @@ static int elog_flash_area_bootstrap(void) static int elog_shrink(void) { struct elog_descriptor *mem = elog_get_mem(); + struct elog_descriptor *flash = elog_get_flash(); struct event_header *event; u16 discard_count = 0; u16 offset = 0; + u16 new_size = 0;
elog_debug("elog_shrink()\n");
@@ -645,25 +647,22 @@ static int elog_shrink(void) discard_count++; }
- /* Erase flash area */ - elog_flash_erase_area(); + new_size = mem->next_event_offset - offset; + memmove(&mem->data[0], &mem->data[offset], new_size); + memset(&mem->data[new_size], ELOG_TYPE_EOL, mem->data_size - new_size); + elog_reinit_descriptor(mem); + + elog_flash_erase(flash->backing_store, flash->total_size);
/* Ensure the area was successfully erased */ - if (elog_get_flash()->next_event_offset >= CONFIG_ELOG_FULL_THRESHOLD) { + if (mem->next_event_offset >= CONFIG_ELOG_FULL_THRESHOLD) { printk(BIOS_ERR, "ELOG: Flash area was not erased!\n"); return -1; }
- /* Write new flash area */ - elog_prepare_empty(elog_get_flash(), - (u8*)elog_get_event_base(mem, offset), - mem->next_event_offset - offset); - - /* Update memory area from flash */ - if (elog_sync_flash_to_mem() < 0) { - printk(BIOS_ERR, "Unable to update memory area from flash\n"); - return -1; - } + elog_flash_write(flash->backing_store, mem->backing_store, + mem->total_size); + elog_reinit_descriptor(flash);
/* Add clear event */ elog_add_event_word(ELOG_TYPE_LOG_CLEAR, offset);