Won Chung has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/81363?usp=email )
Change subject: mb/google/brya: Correct _PLD values ......................................................................
mb/google/brya: Correct _PLD values
For Mithrax and Felwinter, port C1 is on the left side and port C2 is on the right side. Correct the values accordingly.
BUG=b:321051330 TEST=emerge-${BOARD} coreboot then check ACPI table on DUT
Change-Id: I977c3b4081987592a1d46529eb848a07a6c4cb47 Signed-off-by: Won Chung wonchung@google.com --- M src/mainboard/google/brya/variants/felwinter/overridetree.cb M src/mainboard/google/brya/variants/mithrax/overridetree.cb 2 files changed, 10 insertions(+), 10 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/81363/1
diff --git a/src/mainboard/google/brya/variants/felwinter/overridetree.cb b/src/mainboard/google/brya/variants/felwinter/overridetree.cb index 40cbe4e..61cb500 100644 --- a/src/mainboard/google/brya/variants/felwinter/overridetree.cb +++ b/src/mainboard/google/brya/variants/felwinter/overridetree.cb @@ -377,7 +377,7 @@ register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" register "usb_lpm_incapable" = "true" device ref tcss_usb3_port2 on end end @@ -385,7 +385,7 @@ register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" device ref tcss_usb3_port3 on end end end @@ -398,14 +398,14 @@ register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" device ref usb2_port3 on end end chip drivers/usb/acpi diff --git a/src/mainboard/google/brya/variants/mithrax/overridetree.cb b/src/mainboard/google/brya/variants/mithrax/overridetree.cb index 6075351..61344d7 100644 --- a/src/mainboard/google/brya/variants/mithrax/overridetree.cb +++ b/src/mainboard/google/brya/variants/mithrax/overridetree.cb @@ -325,7 +325,7 @@ register "desc" = ""USB3 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" register "usb_lpm_incapable" = "true" device ref tcss_usb3_port2 on end end @@ -333,7 +333,7 @@ register "desc" = ""USB3 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" device ref tcss_usb3_port3 on end end end @@ -346,14 +346,14 @@ register "desc" = ""USB2 Type-C Port C1 (DB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" device ref usb2_port2 on end end chip drivers/usb/acpi register "desc" = ""USB2 Type-C Port C2 (MLB)"" register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" device ref usb2_port3 on end end chip drivers/usb/acpi @@ -365,7 +365,7 @@ register "desc" = ""USB2 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_A" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb2_port9 on end end chip drivers/usb/acpi @@ -379,7 +379,7 @@ register "desc" = ""USB3 Type-A Port A0 (DB)"" register "type" = "UPC_TYPE_USB3_A" register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" device ref usb3_port1 on end end end
-
Won Chung (Code Review)