Change in ...coreboot[master]: sdm845: Add QUPv3 FW load & config

[Akash Asthana (Code Review)]

Akash Asthana has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/25372 )

Change subject: sdm845: Add QUPv3 FW load & config
......................................................................

Patch Set 63:

(1 comment)

https://review.coreboot.org/#/c/25372/6/src/mainboard/google/cheza/qupv3_con... 
File src/mainboard/google/cheza/qupv3_config.c:

https://review.coreboot.org/#/c/25372/6/src/mainboard/google/cheza/qupv3_con... 
PS6, Line 18: struct se_cfg se_mappings[QUPV3_SE_MAX] =
> > Is the loading of FW from respective protocol init function is needed for OTA upgrade OR something […]

Okay, We are planning to load QUPV3 firmware from respective driver init function. Can you please share some reference driver for the same if any exists ?

And if we load FW from respective driver init function then how should we handle the use cases that are only present in HLOS, like fingerprint SPI etc. Should we call respective instance driver init function from ramstage? So that will load FW and configure the required QUP.