Change in coreboot[master]: mb/google/guybrush: Enable CONSOLE_CBMEM_DUMP_TO_UART

[Raul Rangel (Code Review)]

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/61612 )

Change subject: mb/google/guybrush: Enable CONSOLE_CBMEM_DUMP_TO_UART
......................................................................

mb/google/guybrush: Enable CONSOLE_CBMEM_DUMP_TO_UART

This will make debugging boot failures with a non-serial firmware
easier. If we encounter an error that requires a reboot, this will dump
the entire CBMEM contents onto the UART. This is especially helpful
during S0i3 resume because the PSP verstage console logs are not
exposed anywhere.

BUG=b:215599230
TEST=Cause verstage error in S0i3 with non-serial firmware and see that
the verstage logs were dumped to the UART before rebooting.

Entering PSP verstage S0i3 resume
    tpm_setup failed rv:1
    VB2:vb2api_fail() Need recovery, reason: 0x3f / 0xcc
    Saving nvdata

Signed-off-by: Raul E Rangel 
Change-Id: I908037527206cc7bed2302fab60b2912d6dabc73
---
M src/mainboard/google/guybrush/Kconfig
1 file changed, 1 insertion(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/61612/1

diff --git a/src/mainboard/google/guybrush/Kconfig b/src/mainboard/google/guybrush/Kconfig
index 43cbdde..b2fce84 100644
--- a/src/mainboard/google/guybrush/Kconfig
+++ b/src/mainboard/google/guybrush/Kconfig
@@ -12,6 +12,7 @@
    def_bool y
    select AMD_SOC_CONSOLE_UART
    select BOARD_ROMSIZE_KB_16384
+	select CONSOLE_CBMEM_DUMP_TO_UART if !CONSOLE_SERIAL
    select DISABLE_KEYBOARD_RESET_PIN
    select DISABLE_SPI_FLASH_ROM_SHARING
    select DRIVERS_ACPI_THERMAL_ZONE