Change in coreboot[master]: mainboard/google/soraka: Remove wacom digitizer

[Wisley Chen (Code Review)]

Wisley Chen has uploaded this change for review. ( https://review.coreboot.org/21309

Change subject: mainboard/google/soraka: Remove wacom digitizer
......................................................................

mainboard/google/soraka: Remove wacom digitizer

We have no wacom digitizer on I2C#3, so remove it.

TEST=build and boot on soraka.

Change-Id: I3f5a1b9ece6fc9a9443477c7a7aa77dbcdf6a703
signed-off-by: Wisley Chen 
---
M src/mainboard/google/poppy/variants/soraka/devicetree.cb
1 file changed, 1 insertion(+), 9 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/09/21309/1

diff --git a/src/mainboard/google/poppy/variants/soraka/devicetree.cb b/src/mainboard/google/poppy/variants/soraka/devicetree.cb
index b39092b..0c87611 100644
--- a/src/mainboard/google/poppy/variants/soraka/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/soraka/devicetree.cb
@@ -298,15 +298,7 @@
    		end
    	end # I2C #1
    	device pci 15.2 on end # I2C #2
-		device pci 15.3 on
-			chip drivers/i2c/hid
-				register "generic.hid" = ""WCOM50C1""
-				register "generic.desc" = ""WCOM Digitizer""
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)"
-				register "hid_desc_reg_offset" = "0x1"
-				device i2c 0x9 on end
-			end
-		end # I2C #3
+		device pci 15.3 on end # I2C #3
    	device pci 16.0 on  end # Management Engine Interface 1
    	device pci 16.1 off end # Management Engine Interface 2
    	device pci 16.2 off end # Management Engine IDE-R