Change in coreboot[master]: mb/google/brya/variants/primus: Fix GL9755S SD card reader power sequ...

[Malik Hsu (Code Review)]

Malik Hsu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/56981 )

Change subject: mb/google/brya/variants/primus: Fix GL9755S SD card reader power sequence
......................................................................

mb/google/brya/variants/primus: Fix GL9755S SD card reader power
sequence

- Enable EN_PP3300_SD
- Configure SD_PE_RST_L correctly

BUG=b:195625340
TEST=Able to boot with SD card

Signed-off-by: Malik_Hsu 
Change-Id: I33c17e88cabdc9b13634fc8f341aa6a09b7bfde5
---
M src/mainboard/google/brya/variants/primus/gpio.c
1 file changed, 5 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/81/56981/1

diff --git a/src/mainboard/google/brya/variants/primus/gpio.c b/src/mainboard/google/brya/variants/primus/gpio.c
index d07dd0e..8e92447 100644
--- a/src/mainboard/google/brya/variants/primus/gpio.c
+++ b/src/mainboard/google/brya/variants/primus/gpio.c
@@ -37,6 +37,8 @@
    PAD_NC(GPP_D13, NONE),
    /* D14 : ISH_UART0_TXD ==> USB_A1_RT_RST_ODL */
    PAD_CFG_GPO(GPP_D14, 1, DEEP),
+	/* D18 : UART1_TXD ==> SD_PE_RST_L */
+	PAD_CFG_GPO(GPP_D18, 1, PLTRST),

/* E3  : PROC_GP0 ==> NC */
    PAD_NC(GPP_E3, NONE),
@@ -98,6 +100,8 @@
    PAD_CFG_GPO(GPP_D1, 0, DEEP),
    /* D2  : ISH_GP2 ==> EN_FP_PWR */
    PAD_CFG_GPO(GPP_D2, 1, DEEP),
+	/* D18 : UART1_TXD ==> SD_PE_RST_L */
+	PAD_CFG_GPO(GPP_D18, 0, PLTRST),
    /* E0  : SATAXPCIE0 ==> WWAN_PERST_L */
    PAD_CFG_GPO(GPP_E0, 0, DEEP),
    /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
@@ -111,7 +115,7 @@
    /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
    PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
    /* H13 : I2C7_SCL ==> EN_PP3300_SD */
-	PAD_NC(GPP_H13, UP_20K),
+	PAD_CFG_GPO(GPP_H13, 1, PLTRST),
 };

const struct pad_config *variant_gpio_override_table(size_t *num)