[S] Change in coreboot[master]: mb/google/nissa/var/gothrax: Supplement register settings for sar sensor

[Yunlong Jia (Code Review)]

Yunlong Jia has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/78289?usp=email )

Change subject: mb/google/nissa/var/gothrax: Supplement register settings for sar sensor
......................................................................

mb/google/nissa/var/gothrax: Supplement register settings for sar sensor

Set the following register value to make the sar sensor work normally
    "ph0_pin" = "{1, 3, 3}"
    "ph1_pin" = "{3, 2, 1}"
    "ph2_pin" = "{3, 3, 1}"
    "ph3_pin" = "{1, 3, 3}"
    "ph01_resolution" = "512"
    "ph23_resolution" = "1024"
    "startup_sensor" = "1"
    "ph01_proxraw_strength" = "2"
    "ph23_proxraw_strength" = "2"
    "avg_pos_strength" = "256"
    "cs_idle_sleep" = ""gnd""
    "int_comp_resistor" = ""lowest""
    "input_precharge_resistor_ohms" = "4000"
    "input_analog_gain" = "3"

BUG=b:295109511
TEST=emerge-nissa coreboot chromeos-bootimage & Check sar sensor data

Change-Id: Ib15f12d754fec8b379afd702b27d0701fac78072
---
M src/mainboard/google/brya/variants/gothrax/overridetree.cb
1 file changed, 15 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/89/78289/1

diff --git a/src/mainboard/google/brya/variants/gothrax/overridetree.cb b/src/mainboard/google/brya/variants/gothrax/overridetree.cb
index 552c140..87a2b48 100644
--- a/src/mainboard/google/brya/variants/gothrax/overridetree.cb
+++ b/src/mainboard/google/brya/variants/gothrax/overridetree.cb
@@ -271,6 +271,21 @@
    			register "reg_adv_ctrl18" = "0x33"
    			register "reg_adv_ctrl19" = "0xf0"
    			register "reg_adv_ctrl20" = "0xf0"
+
+				register "ph0_pin" = "{1, 3, 3}"
+				register "ph1_pin" = "{3, 2, 1}"
+				register "ph2_pin" = "{3, 3, 1}"
+				register "ph3_pin" = "{1, 3, 3}"
+				register "ph01_resolution" = "512"
+				register "ph23_resolution" = "1024"
+				register "startup_sensor" = "1"
+				register "ph01_proxraw_strength" = "2"
+				register "ph23_proxraw_strength" = "2"
+				register "avg_pos_strength" = "256"
+				register "cs_idle_sleep" = ""gnd""
+				register "int_comp_resistor" = ""lowest""
+				register "input_precharge_resistor_ohms" = "4000"
+				register "input_analog_gain" = "3"
    			device i2c 28 on end
    		end
    	end