Kevin Chiu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/46545 )
Change subject: mb/google/zork: update USB 2.0 controller Lane Parameter for berknip ......................................................................
mb/google/zork: update USB 2.0 controller Lane Parameter for berknip
Enhance USB 2.0 C0/C1 A0/A1 HS DC Voltage Level.
BUG=b:166398726 BRANCH=zork TEST=1. emerge-zork coreboot 2. check U2 register is set correctly.
Change-Id: I69d942605c6d43ece0d71f67df3a5e00b998219b Signed-off-by: Kevin Chiu kevin.chiu@quantatw.com --- M src/mainboard/google/zork/variants/berknip/overridetree.cb 1 file changed, 48 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/45/46545/1
diff --git a/src/mainboard/google/zork/variants/berknip/overridetree.cb b/src/mainboard/google/zork/variants/berknip/overridetree.cb index 674d557..e294168 100644 --- a/src/mainboard/google/zork/variants/berknip/overridetree.cb +++ b/src/mainboard/google/zork/variants/berknip/overridetree.cb @@ -21,6 +21,54 @@ register "telemetry_vddcr_soc_offset" = "0"
# End : OPN Performance Configuration + #USB 2.0 strength + register "usb_2_port_tune_params[0]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0xf, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + register "usb_2_port_tune_params[1]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0xf, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + register "usb_2_port_tune_params[2]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0xf, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + register "usb_2_port_tune_params[3]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0xf, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }"
# Enable I2C2 for trackpad, touchscreen, pen at 400kHz register "i2c[2]" = "{