[coreboot-gerrit] Change in coreboot[master]: soc/amd/picasso: Remove unused SATA configurations

[Martin Roth (Code Review)]

Martin Roth has submitted this change. ( https://review.coreboot.org/c/coreboot/+/36113 )

Change subject: soc/amd/picasso: Remove unused SATA configurations
......................................................................

soc/amd/picasso: Remove unused SATA configurations

Picasso's SATA controller operates only in AHCI mode.  Remove the
Kconfig symbols previously used to select between other possibilities.

Change-Id: Iaeb8b4a2540e976d2e7361faf8c6d261e60398fd
Signed-off-by: Marshall Dawson 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36113
Tested-by: build bot (Jenkins) 
Reviewed-by: Martin Roth 
---
M src/soc/amd/picasso/Kconfig
1 file changed, 0 insertions(+), 42 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Martin Roth: Looks good to me, approved

diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig
index 9447fd7..33e8c81 100644
--- a/src/soc/amd/picasso/Kconfig
+++ b/src/soc/amd/picasso/Kconfig
@@ -136,48 +136,6 @@
    string "AMD public Key"
    default "3rdparty/blobs/soc/amd/picasso/PSP/AmdPubKeyRV.bin"

-config PICASSO_SATA_MODE
-	int "SATA Mode"
-	default 0
-	range 0 6
-	help
-	  Select the mode in which SATA should be driven.
-	  The default is NATIVE.
-	  0: NATIVE mode does not require a ROM.
-	  2: AHCI may work with or without AHCI ROM. It depends on the payload support.
-	     For example, seabios does not require the AHCI ROM.
-	  3: LEGACY IDE
-	  4: IDE to AHCI
-	  5: AHCI7804: ROM Required, and AMD driver required in the OS.
-	  6: IDE to AHCI7804: ROM Required, and AMD driver required in the OS.
-
-comment "NATIVE"
-	depends on PICASSO_SATA_MODE = 0
-
-comment "AHCI"
-	depends on PICASSO_SATA_MODE = 2
-
-comment "LEGACY IDE"
-	depends on PICASSO_SATA_MODE = 3
-
-comment "IDE to AHCI"
-	depends on PICASSO_SATA_MODE = 4
-
-comment "AHCI7804"
-	depends on PICASSO_SATA_MODE = 5
-
-comment "IDE to AHCI7804"
-	depends on PICASSO_SATA_MODE = 6
-
-if PICASSO_SATA_MODE = 2 || PICASSO_SATA_MODE = 5
-
-config AHCI_ROM_ID
-	string  "AHCI device PCI IDs"
-	default "1022,7801" if PICASSO_SATA_MODE = 2
-	default "1022,7804" if PICASSO_SATA_MODE = 5
-
-endif # PICASSO_SATA_MODE = 2 || PICASSO_SATA_MODE = 5
-
 config SERIRQ_CONTINUOUS_MODE
    bool
    default n