[coreboot-gerrit] Patch merged into coreboot/master: nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0

the following patch was just integrated into master:
commit 29dd5da1dc577bf97cb85998b17b2e163a5ab86e
Author: Timothy Pearson 
Date:   Fri Apr 29 01:35:21 2016 -0500

nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0

During DQS receiver enable cycle training on Family 15h platforms the
    read data timing registers were inadvertently set to zero on every
    lane training attempt.

Ensure that the read data timing registers are correctly set after
    each lane is trained in receiver enable cycle training.  This allows
    more than one RDIMM to function on a given DCT channel.

Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9
    Tested-On: ASUS KGPE-D16
    Tested-With: 1x Opteron 6262HE
    Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1)
    Signed-off-by: Timothy Pearson 
    Reviewed-on: https://review.coreboot.org/14543
    Tested-by: build bot (Jenkins)
    Tested-by: Raptor Engineering Automated Test Stand 
    Reviewed-by: Martin Roth

See https://review.coreboot.org/14543 for details.

-gerrit