[coreboot-gerrit] Change in ...coreboot[master]: soc/mediatek/mt8173/i2c.c: Remove variable set but not used

[HAOUAS Elyes (Code Review)]

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33062

Change subject: soc/mediatek/mt8173/i2c.c: Remove variable set but not used
......................................................................

soc/mediatek/mt8173/i2c.c: Remove variable set but not used

Change-Id: I52d841aed31ce6d447280c75c1a1e7a08d8e0ca2
Signed-off-by: Elyes HAOUAS 
---
M src/soc/mediatek/mt8173/i2c.c
1 file changed, 15 insertions(+), 19 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/62/33062/1

diff --git a/src/soc/mediatek/mt8173/i2c.c b/src/soc/mediatek/mt8173/i2c.c
index 3395539..c09eeb1 100644
--- a/src/soc/mediatek/mt8173/i2c.c
+++ b/src/soc/mediatek/mt8173/i2c.c
@@ -111,30 +111,26 @@

static inline void mtk_i2c_dump_info(uint8_t bus)
 {
-	struct mt8173_i2c_regs *regs;
-
-	regs = i2c[bus].i2c_regs;
-
    I2CLOG("I2C register:\nSLAVE_ADDR %x\nINTR_MASK %x\nINTR_STAT %x\n"
           "CONTROL %x\nTRANSFER_LEN %x\nTRANSAC_LEN %x\nDELAY_LEN %x\n"
           "TIMING %x\nSTART %x\nFIFO_STAT %x\nIO_CONFIG %x\nHS %x\n"
           "DEBUGSTAT %x\nEXT_CONF %x\n",
-		(read32(&regs->salve_addr)),
-		(read32(&regs->intr_mask)),
-		(read32(&regs->intr_stat)),
-		(read32(&regs->control)),
-		(read32(&regs->transfer_len)),
-		(read32(&regs->transac_len)),
-		(read32(&regs->delay_len)),
-		(read32(&regs->timing)),
-		(read32(&regs->start)),
-		(read32(&regs->fifo_stat)),
-		(read32(&regs->io_config)),
-		(read32(&regs->hs)),
-		(read32(&regs->debug_stat)),
-		(read32(&regs->ext_conf)));
+		(read32(&i2c[bus].i2c_regs->salve_addr)),
+		(read32(&i2c[bus].i2c_regs->intr_mask)),
+		(read32(&i2c[bus].i2c_regs->intr_stat)),
+		(read32(&i2c[bus].i2c_regs->control)),
+		(read32(&i2c[bus].i2c_regs->transfer_len)),
+		(read32(&i2c[bus].i2c_regs->transac_len)),
+		(read32(&i2c[bus].i2c_regs->delay_len)),
+		(read32(&i2c[bus].i2c_regs->timing)),
+		(read32(&i2c[bus].i2c_regs->start)),
+		(read32(&i2c[bus].i2c_regs->fifo_stat)),
+		(read32(&i2c[bus].i2c_regs->io_config)),
+		(read32(&i2c[bus].i2c_regs->hs)),
+		(read32(&i2c[bus].i2c_regs->debug_stat)),
+		(read32(&i2c[bus].i2c_regs->ext_conf)));

-	I2CLOG("addr address %x\n", (uint32_t)regs);
+	I2CLOG("addr address %x\n", (uint32_t)i2c[bus].i2c_regs);
 }

static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,