Thomas has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/48769 )
Change subject: mb/yanling: Add Yanling YL-KBR6L mainboard + doc ......................................................................
mb/yanling: Add Yanling YL-KBR6L mainboard + doc
The Yanling YL-KBR6L (aka Yanling N18) is a Protecli FW6 with a newer CPUs (i5-8250U), different SuperIO chip (ITE IT8613F), slightly different (newer?) flash memory chip (MX25L6436F) and support for a mPCIe modem.
Working: - USB 3.0 front ports (SeaBIOS, Linux and FreeBSD) - 6 Ethernet ports - HDMI port with libgfxinit and VGA Option ROM - flashrom - PCIe WiFi - SATA and mSATA - mPCIe Modem in mSATA slot (tested with Simcom SIM7100E mPCIe) - Super I/O serial port 0 (RS232 via front RJ45 connector) - SeaBIOS payload (version rel-1.14.0) - Booting Ubuntu 20.04, FreeBSD 12.2 - 64GB RAM (tested with Crucial CT2K32G4SFD8266)
Untested (same as Protectli FW6): - Internal USB 2.0 headers - Boot with cleaned ME
Misc: - Removed "ProbelessTrace" in devicetree as done for other boards by coreboot.
Change-Id: Icbc18914670f87f0943b371400c509ff0eeacf6a Signed-off-by: Thomas Kupper thomas.kupper@gmail.com --- M Documentation/mainboard/index.md A Documentation/mainboard/yanling/yl-kbr6l.md A Documentation/mainboard/yanling/yl-kbr6l_front.jpg A src/mainboard/yanling/Kconfig A src/mainboard/yanling/Kconfig.name A src/mainboard/yanling/yl_kbr6l/Kconfig A src/mainboard/yanling/yl_kbr6l/Kconfig.name A src/mainboard/yanling/yl_kbr6l/Makefile.inc A src/mainboard/yanling/yl_kbr6l/acpi/ec.asl A src/mainboard/yanling/yl_kbr6l/acpi/superio.asl A src/mainboard/yanling/yl_kbr6l/board_info.txt A src/mainboard/yanling/yl_kbr6l/bootblock.c A src/mainboard/yanling/yl_kbr6l/data.vbt A src/mainboard/yanling/yl_kbr6l/devicetree.cb A src/mainboard/yanling/yl_kbr6l/dsdt.asl A src/mainboard/yanling/yl_kbr6l/gma-mainboard.ads A src/mainboard/yanling/yl_kbr6l/gpio.h A src/mainboard/yanling/yl_kbr6l/ramstage.c A src/mainboard/yanling/yl_kbr6l/romstage.c 19 files changed, 820 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/69/48769/1
diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md index 95efe55..2480069 100644 --- a/Documentation/mainboard/index.md +++ b/Documentation/mainboard/index.md @@ -179,3 +179,7 @@ ## UP
- [Squared](up/squared/index.md) + +## Yanling + +- [YL-KBR6L](yanling/yl-kbr6l.md) \ No newline at end of file diff --git a/Documentation/mainboard/yanling/yl-kbr6l.md b/Documentation/mainboard/yanling/yl-kbr6l.md new file mode 100644 index 0000000..28d1d56 --- /dev/null +++ b/Documentation/mainboard/yanling/yl-kbr6l.md @@ -0,0 +1,133 @@ +# Yanling YL-KBR6L + +This board and therefore its documentation is very, very similar to the Protectli FW6. This document is based on theirs, all praise to 3mdeb/Protectli. + +This page describes how to run coreboot on the [Yanling YL-KBR6L], or [Yanling N18] as it seems to be called officially (and its three CPU variants). + + + +## Required proprietary blobs + +To build a minimal working coreboot image some blobs are required (assuming +only the BIOS region is being modified). + +```eval_rst ++-----------------+---------------------------------+---------------------+ +| Binary file | Apply | Required / Optional | ++=================+=================================+=====================+ +| FSP-M, FSP-S | Intel Firmware Support Package | Required | ++-----------------+---------------------------------+---------------------+ +| microcode | CPU microcode | Required | ++-----------------+---------------------------------+---------------------+ +| vgabios | VGA Option ROM | Optional | ++-----------------+---------------------------------+---------------------+ +``` + +FSP-M and FSP-S are obtained after splitting the Kaby Lake FSP binary (done +automatically by the coreboot build system and included into the image) from +the `3rdparty/fsp` submodule. + +Microcode updates are automatically included into the coreboot image by build +system from the `3rdparty/intel-microcode` submodule. + +VGA Option ROM is not required to boot, but if one needs graphics in pre-OS +stage, it should be included (if not using libgfxinit). + +## Flashing coreboot + +### Internal programming + +The main SPI flash can be accessed using [flashrom]. The first version +supporting the chipset is flashrom v1.1. Firmware an be easily flashed +with internal programmer (either BIOS region or full image). + +### External programming + +The system has an internal flash chip which is a 8 MiB soldered SOIC-8 chip. +This chip is located on the bottom side of the case (the radiator side). One +has to remove all screws (in order): 4 top cover screws, 4 side cover screws +(one side is enough), 4 mainboard screws, 4 CPU screws (under DIMMs). Lift up +the mainboard and turn around it. The flash chip is near the SoC on the DIMM +slots side. Use a clip (or solder the wires) to program the chip. Specifically, +it's a Macronix MX25L6436F M2I-08Q (3V) - [datasheet][MX25L6436F]. + +## Known issues + +- assume the same as for Protectli FW6: + +- After flashing with external programmer it is always required to reset RTC + with jumper or disconnect coin cell temporarily. Only then the platform will + boot after flashing. +- FW6A does not always work reliably with all DIMMs. Linux happens to hang or + gives many panics. This issue was present also with vendor BIOS. +- Sometimes FSPMemoryInit return errors or hangs (especially with 2 DIMMs + connected). A workaround is to power cycle the board (even a few times) or + temporarily disconnect DIMM when platform is powered off. +- When using libgfxinit and SeaBIOS bootsplash, the red color is dim + +## Untested + +- assume the same as for Protectli FW6: + +Not all mainboard's peripherals and functions were tested because of lack of +the cables or not being populated on the board case. + +- Internal USB 2.0 headers +- Boot with cleaned ME + +## Working + +- USB 3.0 front ports (SeaBIOS and Linux) +- 6 Ethernet ports +- HDMI port with libgfxinit and VGA Option ROM +- flashrom +- PCIe WiFi +- SATA and mSATA +- mPCIe Modem in mSATA slot (tested with Simcom SIM7100E mPCIe) +- Super I/O serial port 0 (RS232 via front RJ45 connector) +- SeaBIOS payload (version rel-1.14) +- Booting Ubuntu 20.04, FreeBSD 12.2 +- 64GB RAM (tested with Crucial CT2K32G4SFD8266) + +## Technology + +```eval_rst ++---------------------+-----------------------------------------------+ +| CPU | [Intel Core i5-8250U] | ++---------------------+-----------------------------------------------+ +| PCH | Kaby Lake U w/ iHDCP2.2 Premium | ++---------------------+-----------------------------------------------+ +| Super I/O, EC | ITE IT8613F | ++---------------------+-----------------------------------------------+ +| Coprocessor | Intel Management Engine | ++---------------------+-----------------------------------------------+ +| Ethernet Controller | 6x Intel I211AT | ++---------------------+-----------------------------------------------+ +``` +Information about the PCH can be found in [Intel 7th and 8th gen datasheet vol 1] and [Intel 7th and 8th gen datasheet vol 2]. + +## Ports + +```eval_rst ++---------------------+-----------------------------------------------+ +| Ethernet | 6x 1GbE | ++---------------------+-----------------------------------------------+ +| USB | 4x USB 3.0 | ++---------------------+-----------------------------------------------+ +| Serial/COM | 1x RJ-45 serial port | ++---------------------+-----------------------------------------------+ +| SATA | 1x mSATA (port 0) + 1x SATA 3.0 (port 1) | ++---------------------+-----------------------------------------------+ +| Cellular Modem | 1x mPCIe, shared with mSATA slot, nano-SIM | ++---------------------+-----------------------------------------------+ +| Wifi/Bluetooth | 1x mPCIe slot, under mSATA/Modem, | +| | supports half-size cards only | ++---------------------+-----------------------------------------------+ +``` + +[flashrom]: https://flashrom.org/Flashrom +[Intel 7th and 8th gen datasheet vol 1]: https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/7th-... +[Intel 7th and 8th gen datasheet vol 2]: https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/7th-... +[MX25L6436F]: https://www.mxic.com.tw/Lists/Datasheet/Attachments/7405/MX25L6436F,%203V,%2... +[Yanling YL-KBR6L]: https://www.aliexpress.com/item/1005001813291053.html +[Yanling N18]:https://www.ylipc.com/product/network_server_network_server/N18_Firewall_Min... diff --git a/Documentation/mainboard/yanling/yl-kbr6l_front.jpg b/Documentation/mainboard/yanling/yl-kbr6l_front.jpg new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/Documentation/mainboard/yanling/yl-kbr6l_front.jpg diff --git a/src/mainboard/yanling/Kconfig b/src/mainboard/yanling/Kconfig new file mode 100644 index 0000000..2972a38 --- /dev/null +++ b/src/mainboard/yanling/Kconfig @@ -0,0 +1,15 @@ +if VENDOR_YANLING + +choice + prompt "Mainboard model" + +source "src/mainboard/yanling/*/Kconfig.name" + +endchoice + +source "src/mainboard/yanling/*/Kconfig" + +config MAINBOARD_VENDOR + default "Yanling" + +endif # VENDOR_YANLING diff --git a/src/mainboard/yanling/Kconfig.name b/src/mainboard/yanling/Kconfig.name new file mode 100644 index 0000000..6cc7ef1 --- /dev/null +++ b/src/mainboard/yanling/Kconfig.name @@ -0,0 +1,2 @@ +config VENDOR_YANLING + bool "Yanling" diff --git a/src/mainboard/yanling/yl_kbr6l/Kconfig b/src/mainboard/yanling/yl_kbr6l/Kconfig new file mode 100644 index 0000000..838bc44 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/Kconfig @@ -0,0 +1,57 @@ +if BOARD_YANLING_YLKBR6L + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_GMA_HAVE_VBT + select MAINBOARD_HAS_LIBGFXINIT + select SEABIOS_ADD_SERCON_PORT_FILE if PAYLOAD_SEABIOS + select SOC_INTEL_KABYLAKE + select SPI_FLASH_MACRONIX + select SUPERIO_ITE_IT8613E + select MAINBOARD_HAS_CRB_TPM + select HAVE_INTEL_PTT + select TPM2 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAINBOARD_DIR + string + default "yanling/yl_kbr6l" + +config MAINBOARD_PART_NUMBER + string + default "YLKBR6L" + +config DIMM_MAX + int + default 2 + +config DIMM_SPD_SIZE + int + default 512 + +config MAX_CPUS + int + default 8 + +config VGA_BIOS_ID + string + default "8086,5917" + +config PXE_ROM_ID + string + default "8086,1539" + +config CBFS_SIZE + hex + default 0x600000 + +config USE_PM_ACPI_TIMER + default n + +endif diff --git a/src/mainboard/yanling/yl_kbr6l/Kconfig.name b/src/mainboard/yanling/yl_kbr6l/Kconfig.name new file mode 100644 index 0000000..8b039de --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_YANLING_YLKBR6L + bool "YLKBR6L" diff --git a/src/mainboard/yanling/yl_kbr6l/Makefile.inc b/src/mainboard/yanling/yl_kbr6l/Makefile.inc new file mode 100644 index 0000000..4cd7aac --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/Makefile.inc @@ -0,0 +1,7 @@ +## SPDX-License-Identifier: GPL-2.0-or-later + +bootblock-y += bootblock.c + +ramstage-y += ramstage.c + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/yanling/yl_kbr6l/acpi/ec.asl b/src/mainboard/yanling/yl_kbr6l/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/acpi/ec.asl diff --git a/src/mainboard/yanling/yl_kbr6l/acpi/superio.asl b/src/mainboard/yanling/yl_kbr6l/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/acpi/superio.asl diff --git a/src/mainboard/yanling/yl_kbr6l/board_info.txt b/src/mainboard/yanling/yl_kbr6l/board_info.txt new file mode 100644 index 0000000..c12e388 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Yanling +Board name: YL-KBR6L +Category: sbc +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/yanling/yl_kbr6l/bootblock.c b/src/mainboard/yanling/yl_kbr6l/bootblock.c new file mode 100644 index 0000000..e35a7cc --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/bootblock.c @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <bootblock_common.h> +#include <superio/ite/it8613e/it8613e.h> +#include <superio/ite/common/ite.h> + +#define GPIO_DEV PNP_DEV(0x2e, IT8613E_GPIO) +#define UART_DEV PNP_DEV(0x2e, IT8613E_SP1) + +void bootblock_mainboard_early_init(void) +{ + ite_reg_write(GPIO_DEV, 0x2c, 0x41); /* disable K8 power seq */ + ite_reg_write(GPIO_DEV, 0x2d, 0x02); /* PCICLK 25MHz */ + ite_enable_serial(UART_DEV, CONFIG_TTYS0_BASE); +} diff --git a/src/mainboard/yanling/yl_kbr6l/data.vbt b/src/mainboard/yanling/yl_kbr6l/data.vbt new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/data.vbt diff --git a/src/mainboard/yanling/yl_kbr6l/devicetree.cb b/src/mainboard/yanling/yl_kbr6l/devicetree.cb new file mode 100644 index 0000000..b57ab96 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/devicetree.cb @@ -0,0 +1,278 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD" + register "s0ix_enable" = "1" + + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + register "gen1_dec" = "0x00fc0201" + register "gen2_dec" = "0x007c0a01" + register "gen3_dec" = "0x000c03e1" + register "gen4_dec" = "0x001c02e1" + + register "eist_enable" = "1" + + # Disable DPTF + register "dptf_enable" = "0" + + # Enable VT-d + register "ignore_vtd" = "0" + + # Enable SERIRQ continuous + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + register "tcc_offset" = "5" # TCC of 95C + + # FSP Configuration + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "DspEnable" = "0" + register "IoBufferOwnership" = "0" + register "SsicPortEnable" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "SkipExtGfxScan" = "1" + register "HeciEnabled" = "1" + register "SaGv" = "SaGv_Enabled" + register "IslVrCmd" = "2" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "4" # 4s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline(ohm)| 10.3m | 2.4m | 3.1m | 3.1m | + #| DcLoadline(ohm)| 10.3m | 2.4m | 3.1m | 3.1m | + #+----------------+-------+-------+-------+-------+ + #Note: IccMax settings are moved to SoC code + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + }" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Enable SATA ports 1,2 + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsEnable[2]" = "0" + register "SataPortsDevSlp[0]" = "0" + register "SataPortsDevSlp[1]" = "0" + + # Enable Root ports. 1-6 for LAN and Root Port 9 + register "PcieRpEnable[0]" = "1" + register "PcieRpEnable[1]" = "1" + register "PcieRpEnable[2]" = "1" + register "PcieRpEnable[3]" = "1" + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[5]" = "1" + register "PcieRpEnable[8]" = "1" # mPCIe WiFi + + # Enable Advanced Error Reporting for RP 1-6, 9 + register "PcieRpAdvancedErrorReporting[0]" = "1" + register "PcieRpAdvancedErrorReporting[1]" = "1" + register "PcieRpAdvancedErrorReporting[2]" = "1" + register "PcieRpAdvancedErrorReporting[3]" = "1" + register "PcieRpAdvancedErrorReporting[4]" = "1" + register "PcieRpAdvancedErrorReporting[5]" = "1" + register "PcieRpAdvancedErrorReporting[8]" = "1" + + # Enable Latency Tolerance Reporting Mechanism RP 1-6, 9 + register "PcieRpLtrEnable[0]" = "1" + register "PcieRpLtrEnable[1]" = "1" + register "PcieRpLtrEnable[2]" = "1" + register "PcieRpLtrEnable[3]" = "1" + register "PcieRpLtrEnable[4]" = "1" + register "PcieRpLtrEnable[5]" = "1" + register "PcieRpLtrEnable[8]" = "1" + + # TODO: Check why protectli used them and WiFi won't work + # for me if I set them -> err: lost pci device + # Enable RP 9 CLKREQ# support + #register "PcieRpClkReqSupport[8]" = "1" + # RP 9 uses CLKREQ0# + #register "PcieRpClkReqNumber[8]" = "0" + + # Clocks 0-5 for RP 1-6 + register "PcieRpClkSrcNumber[0]" = "0" + register "PcieRpClkSrcNumber[1]" = "1" + register "PcieRpClkSrcNumber[2]" = "2" + register "PcieRpClkSrcNumber[3]" = "3" + register "PcieRpClkSrcNumber[4]" = "4" + register "PcieRpClkSrcNumber[5]" = "5" + # RP 9 shares CLKSRC5# with RP 6 + register "PcieRpClkSrcNumber[8]" = "5" + + + # USB 2.0 enable ports 1-8, disable ports 9-12 + register "usb2_ports[0]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port + register "usb2_ports[1]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port + register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port + register "usb2_ports[3]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port + register "usb2_ports[4]" = "USB2_PORT_SHORT(OC_SKIP)" # Type-A Port + register "usb2_ports[5]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port + register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # TYPE-A Port + register "usb2_ports[7]" = "USB2_PORT_SHORT(OC_SKIP)" # mPCIe slot + + # USB 3.0 enable ports 1-4, disable ports 5-6 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoDisabled, \ + }" + + # Lock Down CHIPSET_LOCKDOWN_COREBOOT + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # 8086 5914 - Host Bridge + device pci 02.0 on end # 8086 5917 - Integrated Graphics Device + device pci 04.0 off end # 8086 ???? - SA thermal subsystem + device pci 05.0 off end # 8086 ???? - SA IMGU + device pci 08.0 off end # 8086 ???? - Gaussian Mixture Model + device pci 13.0 off end # 8086 9d35 - Integrated Sensor Hub + device pci 14.0 on end # 8086 9d2f - USB xHCI + device pci 14.1 off end # 8086 9d30 - USB xDCI (OTG) + device pci 14.2 off end # 8086 9d31 - Thermal Subsystem + device pci 14.3 off end # 8086 9d32 - Camera I/O Host Controller + device pci 15.0 off end # 8086 9d60 - I2C #0 + device pci 15.1 off end # 8086 9d61 - I2C #1 + device pci 15.2 off end # 8086 9d62 - I2C #2 + device pci 15.3 off end # 8086 9d63 - I2C #3 + device pci 16.0 on end # 8086 9d3a - Management Engine Interface 1 + device pci 16.1 off end # 8086 9d3b - Management Engine Interface 2 + device pci 16.2 off end # 8086 9d3c - Management Engine IDE-Redirection + device pci 16.3 off end # 8086 9d3d - Management Engine KT Redirection + device pci 16.4 off end # 8086 9d3e - Management Engine Interface 3 + device pci 17.0 on end # 8086 9d03 - SATA + device pci 19.0 off end # 8086 9d66 - UART #2 + device pci 19.1 off end # 8086 9d65 - I2C #5 + device pci 19.2 off end # 8086 9d64 - I2C #4 + device pci 1c.0 on end # 8086 9d10 - PCI Express Port 1 + device pci 1c.1 on end # 8086 9d11 - PCI Express Port 2 + device pci 1c.2 on end # 8086 9d12 - PCI Express Port 3 + device pci 1c.3 on end # 8086 9d13 - PCI Express Port 4 + device pci 1c.4 on end # 8086 9d14 - PCI Express Port 5 + device pci 1c.5 on end # 8086 9d15 - PCI Express Port 6 + device pci 1c.6 off end # 8086 9d16 - PCI Express Port 7 + device pci 1c.7 off end # 8086 9d17 - PCI Express Port 8 + device pci 1d.0 on # 8086 9d18 - PCI Express Port 9 - WiFi + smbios_slot_desc + "SlotTypePciExpressMini52pinWithoutBSKO" + "SlotLengthShort" "WIFI1" "SlotDataBusWidth1X" + end + device pci 1d.1 off end # 8086 9d19 - PCI Express Port 10 + device pci 1d.2 off end # 8086 9d1a - PCI Express Port 11 + device pci 1d.3 off end # 8086 9d1b - PCI Express Port 12 + device pci 1e.0 off end # 8086 9d27 - UART #0 + device pci 1e.1 off end # 8086 9d28 - UART #1 + device pci 1e.2 off end # 8086 9d29 - GSPI #0 + device pci 1e.3 off end # 8086 9d2a - GSPI #1 + device pci 1e.4 off end # 8086 9d2b - eMMC + device pci 1e.5 off end # 8086 ???? - SDIO + device pci 1e.6 off end # 8086 9d2d = SDXC + device pci 1f.0 on # 8086 9d4e - LPC Controller + chip superio/ite/it8613e + device pnp 2e.0 off end + device pnp 2e.1 on # COM 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # Environment Controller + device pnp 2e.5 off end # Keyboard + device pnp 2e.6 off end # Mouse + device pnp 2e.7 off end # GPIO + device pnp 2e.a off end # CIR + end + end # LPC Interface + device pci 1f.1 on end # 8086 9d20 - P2SB + device pci 1f.2 on end # 8086 9d21 - Power Management Controller + device pci 1f.3 off end # 8086 9d71 - Intel HDA + device pci 1f.4 on end # 8086 9d23 - SMBus + device pci 1f.5 off end # 8086 9d24 - PCH SPI + device pci 1f.6 off end # 8086 9d25 - GbE + end + chip drivers/crb + device mmio 0xfed40000 on end + end +end diff --git a/src/mainboard/yanling/yl_kbr6l/dsdt.asl b/src/mainboard/yanling/yl_kbr6l/dsdt.asl new file mode 100644 index 0000000..3de4e26 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/dsdt.asl @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <acpi/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + ACPI_DSDT_REV_2, + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 /* OEM revision */ +) +{ + #include <soc/intel/common/block/acpi/acpi/platform.asl> + #include <soc/intel/skylake/acpi/globalnvs.asl> + #include <cpu/intel/common/acpi/cpu.asl> + + Device (_SB.PCI0) + { + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + + #include <southbridge/intel/common/acpi/sleepstates.asl> +} diff --git a/src/mainboard/yanling/yl_kbr6l/gma-mainboard.ads b/src/mainboard/yanling/yl_kbr6l/gma-mainboard.ads new file mode 100644 index 0000000..0e0f4f8 --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/gma-mainboard.ads @@ -0,0 +1,15 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (HDMI1, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/yanling/yl_kbr6l/gpio.h b/src/mainboard/yanling/yl_kbr6l/gpio.h new file mode 100644 index 0000000..7ec5a8a --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/gpio.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef _GPIOFW6B_H +#define _GPIOFW6B_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { +/* RCIN# */ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), +/* LPC_LAD_0 */ PAD_CFG_NF(GPP_A1, UP_20K, DEEP, NF1), +/* LPC_LAD_1 */ PAD_CFG_NF(GPP_A2, UP_20K, DEEP, NF1), +/* LPC_LAD_2 */ PAD_CFG_NF(GPP_A3, UP_20K, DEEP, NF1), +/* LPC_LAD_3 */ PAD_CFG_NF(GPP_A4, UP_20K, DEEP, NF1), +/* LPC_FRAME */ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), +/* LPC_SERIRQ */ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), +/* PIRQA_N*/ PAD_CFG_TERM_GPO(GPP_A7, 1, NONE, DEEP), +/* LPC_CLKRUN */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), +/* PCH_LPC_CLK0 */ PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), +/* PCH_LPC_CLK1 */ PAD_CFG_NF(GPP_A10, DN_20K, DEEP, NF1), +/* PME# */ PAD_CFG_NF(GPP_A11, UP_20K, DEEP, NF1), +/* ISH_GP6 */ PAD_NC(GPP_A12, NONE), +/* PCH_SUSPWRACB */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), +/* PCH_SUSSTAT */ PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), +/* PCH_SUSACK */ PAD_CFG_NF(GPP_A15, DN_20K, DEEP, NF1), +/* SD_1P8_SEL */ PAD_NC(GPP_A16, NONE), +/* SD_PWR_EN */ PAD_NC(GPP_A17, NONE), +/* ISH_GP0 */ PAD_NC(GPP_A18, NONE), +/* ISH_GP1 */ PAD_NC(GPP_A19, NONE), +/* ISH_GP2 */ PAD_NC(GPP_A20, NONE), +/* ISH_GP3 */ PAD_NC(GPP_A21, NONE), +/* ISH_GP4 */ PAD_NC(GPP_A22, NONE), +/* ISH_GP5 */ PAD_NC(GPP_A23, NONE), +/* CORE_VID0 */ PAD_NC(GPP_B0, NONE), +/* CORE_VID1 */ PAD_NC(GPP_B1, NONE), +/* VRALERT_N */ PAD_CFG_NF(GPP_B2, NONE, DEEP, NF1), +/* CPU_GP2 */ PAD_NC(GPP_B3, NONE), +/* CPU_GP3 */ PAD_NC(GPP_B4, NONE), +/* SRCCLKREQ0_N */ PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), +/* SRCCLKREQ1_N*/ PAD_NC(GPP_B6, NONE), +/* SRCCLKREQ2_N*/ PAD_NC(GPP_B7, NONE), +/* SRCCLKREQ3_N*/ PAD_NC(GPP_B8, NONE), +/* SRCCLKREQ4_N*/ PAD_NC(GPP_B9, NONE), +/* SRCCLKREQ5_N*/ PAD_NC(GPP_B10, NONE), +/* EXT_PWR_GATE_N */ PAD_CFG_NF(GPP_B11, NONE, DEEP, NF1), +/* SLP_S0# */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), +/* PCH_PLT_RST */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), +/* SPKR */ PAD_CFG_NF(GPP_B14, DN_20K, PLTRST, NF1), +/* GSPI0_CS_N */ PAD_NC(GPP_B15, NONE), +/* GSPI0_CLK */ PAD_NC(GPP_B16, NONE), +/* GSPI0_MISO */ PAD_NC(GPP_B17, NONE), +/* GSPI0_MOSI */ PAD_NC(GPP_B18, NONE), +/* GSPI1_CS_N */ PAD_NC(GPP_B19, NONE), +/* GSPI1_CLK */ PAD_NC(GPP_B20, NONE), +/* GSPI1_MISO */ PAD_NC(GPP_B21, NONE), +/* GSPI1_MOSI */ PAD_NC(GPP_B22, NONE), +/* SM1ALERT# */ PAD_NC(GPP_B23, NONE), +/* SMB_CLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), +/* SMB_DATA */ PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), +/* SMBALERT# */ PAD_CFG_NF(GPP_C2, NONE, DEEP, NF1), +/* SML0_CLK */ PAD_NC(GPP_C3, NONE), +/* SML0DATA */ PAD_NC(GPP_C4, NONE), +/* SML0ALERT# */ PAD_NC(GPP_C5, NONE), +/* UART0_RXD */ PAD_NC(GPP_C8, NONE), +/* UART0_TXD */ PAD_NC(GPP_C9, NONE), +/* UART0_CTS_N */ PAD_NC(GPP_C10, NONE), +/* UART0_RTS_N */ PAD_NC(GPP_C11, NONE), +/* UART1_RXD */ PAD_NC(GPP_C12, NONE), +/* UART1_TXD */ PAD_NC(GPP_C13, NONE), +/* UART1_CTS_N */ PAD_NC(GPP_C14, NONE), +/* UART1_RTS_N */ PAD_NC(GPP_C15, NONE), +/* I2C0_SDA */ PAD_NC(GPP_C16, NONE), +/* I2C0_SCL */ PAD_NC(GPP_C17, NONE), +/* I2C1_SDA */ PAD_NC(GPP_C18, NONE), +/* I2C1_SCL */ PAD_NC(GPP_C19, NONE), +/* UART2_RXD */ PAD_NC(GPP_C20, NONE), +/* UART2_TXD */ PAD_NC(GPP_C21, NONE), +/* UART2_CTS_N */ PAD_NC(GPP_C22, NONE), +/* UART2_RTS_N */ PAD_NC(GPP_C23, NONE), +/* ITCH_SPI_CS */ PAD_NC(GPP_D0, NONE), +/* ITCH_SPI_CLK */ PAD_NC(GPP_D1, NONE), +/* ITCH_SPI_MISO_1 */ PAD_NC(GPP_D2, NONE), +/* ITCH_SPI_MISO_0 */ PAD_NC(GPP_D3, NONE), +/* FLASHTRIG */ PAD_NC(GPP_D4, NONE), +/* ISH_I2C0_SDA */ PAD_NC(GPP_D5, NONE), +/* ISH_I2C0_SCL */ PAD_NC(GPP_D6, NONE), +/* ISH_I2C1_SDA */ PAD_NC(GPP_D7, NONE), +/* ISH_I2C1_SCL */ PAD_NC(GPP_D8, NONE), +/* GPP_D9 */ PAD_NC(GPP_D9, NONE), +/* GPP_D10 */ PAD_NC(GPP_D10, NONE), +/* GPP_D11 */ PAD_NC(GPP_D11, NONE), +/* GPP_D12 */ PAD_NC(GPP_D12, NONE), +/* ISH_UART0_RXD */ PAD_NC(GPP_D13, NONE), +/* ISH_UART0_TXD */ PAD_NC(GPP_D14, NONE), +/* ISH_UART0_RTS */ PAD_NC(GPP_D15, NONE), +/* ISH_UART0_CTS */ PAD_NC(GPP_D16, NONE), +/* DMIC_CLK_1 */ PAD_NC(GPP_D17, NONE), +/* DMIC_DATA_1 */ PAD_NC(GPP_D18, NONE), +/* DMIC_CLK_0 */ PAD_NC(GPP_D19, NONE), +/* DMIC_DATA_0 */ PAD_NC(GPP_D20, NONE), +/* ITCH_SPI_D2 */ PAD_NC(GPP_D21, NONE), +/* ITCH_SPI_D3 */ PAD_NC(GPP_D22, NONE), +/* I2S_MCLK */ PAD_NC(GPP_D23, NONE), +/* SATAXPCIE0 (TP8) */ PAD_NC(GPP_E0, NONE), +/* SATAXPCIE1 (TP9)*/ PAD_NC(GPP_E1, NONE), +/* SATAXPCIE2 (TP10) */ PAD_NC(GPP_E2, NONE), +/* CPU_GP0 */ PAD_NC(GPP_E3, NONE), +/* SATA_DEVSLP0 */ PAD_NC(GPP_E4, NONE), +/* SATA_DEVSLP1 */ PAD_NC(GPP_E5, NONE), +/* SATA_DEVSLP2 */ PAD_NC(GPP_E6, NONE), +/* CPU_GP1 */ PAD_NC(GPP_E7, NONE), +/* SATA_LED */ PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1), +/* USB2_OC_0 */ PAD_NC(GPP_E9, NONE), +/* USB2_OC_1 */ PAD_NC(GPP_E10, NONE), +/* USB2_OC_2 */ PAD_NC(GPP_E11, NONE), +/* USB2_OC_3 */ PAD_NC(GPP_E12, NONE), +/* DDI1_HPD */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), +/* DDI2_HPD */ PAD_NC(GPP_E14, NONE), +/* DDI3_HPD */ PAD_NC(GPP_E15, NONE), +/* DDI4_HPD */ PAD_NC(GPP_E16, NONE), +/* EDP_HPD */ PAD_NC(GPP_E17, NONE), +/* DDPB_CTRLCLK */ PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1), +/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_E19, DN_20K, DEEP, NF1), +/* DDPC_CTRLCLK */ PAD_NC(GPP_E20, NONE), +/* DDPC_CTRLDATA */ PAD_NC(GPP_E21, NONE), +/* DDPD_CTRLCLK */ PAD_NC(GPP_E22, NONE), +/* DDPD_CTRLDATA */ PAD_NC(GPP_E23, NONE), +/* I2S2_SCLK */ PAD_NC(GPP_F0, NONE), +/* I2S2_SFRM */ PAD_NC(GPP_F1, NONE), +/* I2S2_TXD */ PAD_NC(GPP_F2, NONE), +/* I2S2_RXD */ PAD_NC(GPP_F3, NONE), +/* I2C2_SDA */ PAD_NC(GPP_F4, NONE), +/* I2C2_SCL */ PAD_NC(GPP_F5, NONE), +/* I2C3_SDA */ PAD_NC(GPP_F6, NONE), +/* I2C3_SCL */ PAD_NC(GPP_F7, NONE), +/* I2C4_SDA */ PAD_NC(GPP_F8, NONE), +/* I2C4_SDA */ PAD_NC(GPP_F9, NONE), +/* I2C5_SDA */ PAD_NC(GPP_F10, NONE), +/* I2C5_SCL */ PAD_NC(GPP_F11, NONE), +/* EMMC_CMD */ PAD_NC(GPP_F12, NONE), +/* EMMC_DATA0 */ PAD_NC(GPP_F13, NONE), +/* EMMC_DATA1 */ PAD_NC(GPP_F14, NONE), +/* EMMC_DATA2 */ PAD_NC(GPP_F15, NONE), +/* EMMC_DATA3 */ PAD_NC(GPP_F16, NONE), +/* EMMC_DATA4 */ PAD_NC(GPP_F17, NONE), +/* EMMC_DATA5 */ PAD_NC(GPP_F18, NONE), +/* EMMC_DATA6 */ PAD_NC(GPP_F19, NONE), +/* EMMC_DATA7 */ PAD_NC(GPP_F20, NONE), +/* EMMC_RCLK */ PAD_NC(GPP_F21, NONE), +/* EMMC_CLK */ PAD_NC(GPP_F22, NONE), +/* GPP_F23 */ PAD_NC(GPP_F23, NONE), +/* SD_CMD */ PAD_NC(GPP_G0, NONE), +/* SD_DATA0 */ PAD_NC(GPP_G1, NONE), +/* SD_DATA1 */ PAD_NC(GPP_G2, NONE), +/* SD_DATA2 */ PAD_NC(GPP_G3, NONE), +/* SD_DATA3 */ PAD_NC(GPP_G4, NONE), +/* SD_CD# */ PAD_NC(GPP_G5, NONE), +/* SD_CLK */ PAD_NC(GPP_G6, NONE), +/* SD_WP */ PAD_NC(GPP_G7, NONE), +/* PCH_BATLOW */ PAD_NC(GPD0, NONE), +/* ACPRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1), +/* LAN_WAKE_N */ PAD_NC(GPD2, NONE), +/* PWRBTN */ PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1), +/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1), +/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1), +/* PM_SLP_SA# (TP7) */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1), +/* GPD7_RSVD */ PAD_CFG_TERM_GPO(GPD7, 1, NONE, DEEP), +/* PM_SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1), +/* SLP_WLAN# (TP6) */ PAD_NC(GPD9, NONE), +/* SLP_S5# (TP3) */ PAD_CFG_NF(GPD10, NONE, DEEP, NF1), +/* LANPHYC */ PAD_NC(GPD11, NONE), +}; + +#endif + +#endif diff --git a/src/mainboard/yanling/yl_kbr6l/ramstage.c b/src/mainboard/yanling/yl_kbr6l/ramstage.c new file mode 100644 index 0000000..9518b1d --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/ramstage.c @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <soc/ramstage.h> + +#include "gpio.h" + +void mainboard_silicon_init_params(FSP_SIL_UPD *params) +{ + /* + * Configure pads prior to SiliconInit() in case there's any + * dependencies during hardware initialization. + */ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); + + params->TurboMode = 1; + params->PchPort61hEnable = 1; + params->CdClock = 3; +} diff --git a/src/mainboard/yanling/yl_kbr6l/romstage.c b/src/mainboard/yanling/yl_kbr6l/romstage.c new file mode 100644 index 0000000..2b68e1a --- /dev/null +++ b/src/mainboard/yanling/yl_kbr6l/romstage.c @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <fsp/api.h> +#include <soc/romstage.h> +#include <spd_bin.h> +#include <string.h> + +static void mainboard_fill_dq_map_data(void *dq_map_ch0, void *dq_map_ch1) +{ + const u8 dq_map[2][12] = { + { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, + 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 }, + { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, + 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } }; + memcpy(dq_map_ch0, dq_map[0], sizeof(dq_map[0])); + memcpy(dq_map_ch1, dq_map[1], sizeof(dq_map[1])); +} + +static void mainboard_fill_dqs_map_data(void *dqs_map_ch0, void *dqs_map_ch1) +{ + const u8 dqs_map[2][8] = { + { 0, 1, 2, 3, 4, 5, 6, 7 }, + { 1, 0, 2, 3, 4, 5, 6, 7 } }; + memcpy(dqs_map_ch0, dqs_map[0], sizeof(dqs_map[0])); + memcpy(dqs_map_ch1, dqs_map[1], sizeof(dqs_map[1])); +} + +static void mainboard_fill_rcomp_res_data(void *rcomp_ptr) +{ + const u16 RcompResistor[3] = { 121, 81, 100 }; + memcpy(rcomp_ptr, RcompResistor, sizeof(RcompResistor)); +} + +static void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) +{ + static const u16 RcompTarget[5] = { 100, 40, 20, 20, 26 }; + memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget)); +} + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *mem_cfg; + mem_cfg = &mupd->FspmConfig; + + mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0, + &mem_cfg->DqByteMapCh1); + mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0, + &mem_cfg->DqsMapCpu2DramCh1); + mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); + mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); + + struct spd_block blk = { + .addr_map = { 0x50, 0x52, }, + }; + + mem_cfg->DqPinsInterleaved = 1; + mem_cfg->CaVrefConfig = 2; + + get_spd_smbus(&blk); + dump_spd_info(&blk); + + mem_cfg->MemorySpdDataLen = blk.len; + mem_cfg->MemorySpdPtr00 = (uintptr_t)blk.spd_array[0]; + mem_cfg->MemorySpdPtr10 = (uintptr_t)blk.spd_array[1]; +}