Hello Angel Pons, build bot (Jenkins), Patrick Georgi, Martin Roth,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/38346
to look at the new patch set (#7).
Change subject: mainboard: add Supermicro X9SCL/X9SCM ......................................................................
mainboard: add Supermicro X9SCL/X9SCM
Boots to Linux.
Works: - CPU (Core i3-2120 tested) - Memory (one 1GB 1Rx8 PC3-10600E module tested) - Slots 4, 6, 7
To fix: - SuperIO hardware monitor setup for PECI and fan control - SuperIO ASL in DSDT (e.g. UART Devices) - PEG PCIe lanes (should show x8 max width instead of x16 on 0:1.0 for Slot 7) - Interrupt routing for G200e graphics on legacy PCI
Untested: - IPMI where BMC is fully implemented (X9SC[LM](+)-F variants) - GbE on X9SCL+-F (where there are two 82574L instead of one) - Slot 5 (x4 on 0:06.0) (only applicable to X9SCM variants)
Signed-off-by: Jonathan A. Kollasch jakllsch@kollasch.net Change-Id: I985db89d67de21bbafbdc34d7044496434a6eb17 Depends-On: I5b7599746195cfa996a48320404a8dbe6820483a, I1206746332c9939a78b67e7b48d3098bdef8a2ed --- A src/mainboard/supermicro/x9scl/Kconfig A src/mainboard/supermicro/x9scl/Kconfig.name A src/mainboard/supermicro/x9scl/Makefile.inc A src/mainboard/supermicro/x9scl/acpi/ec.asl A src/mainboard/supermicro/x9scl/acpi/platform.asl A src/mainboard/supermicro/x9scl/acpi/superio.asl A src/mainboard/supermicro/x9scl/acpi_tables.c A src/mainboard/supermicro/x9scl/board_info.txt A src/mainboard/supermicro/x9scl/devicetree.cb A src/mainboard/supermicro/x9scl/dsdt.asl A src/mainboard/supermicro/x9scl/early_init.c A src/mainboard/supermicro/x9scl/gpio.c A src/mainboard/supermicro/x9scl/hda_verb.c A src/mainboard/supermicro/x9scl/superio.h 14 files changed, 698 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/46/38346/7