coreboot-gerrit June 2022

coreboot-gerrit@coreboot.org

1 participants
1232 discussions

Change in coreboot[master]: soc/intel/skylake: Improve comment for DISB
by Patrick Rudolph (Code Review) 10 Jun '23

10 Jun '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36650 ) Change subject: soc/intel/skylake: Improve comment for DISB ...................................................................... soc/intel/skylake: Improve comment for DISB Either documentation or FSP is wrong, as the behaviour of DISB is actually reversed. Document that and warn about clearing the bit. Change-Id: I9ca748ddb245cae632e423a417c6a25d52a15354 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/soc/intel/skylake/pmc.c 1 file changed, 10 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/50/36650/1 diff --git a/src/soc/intel/skylake/pmc.c b/src/soc/intel/skylake/pmc.c index ab9297f..3bc5c68 100644 --- a/src/soc/intel/skylake/pmc.c +++ b/src/soc/intel/skylake/pmc.c @@ -31,7 +31,16 @@ void pmc_set_disb(void) { - /* Set the DISB after DRAM init */ + /* + * Set the DISB after DRAM init. + * + * According to Document Number: 332691-002EN + * "Intel 100 Series and Intel C230 Series Chipset Family Platform + * Controller Hub (PCH) Vol2" this bit must be CLEARED after DRAM init. + * + * Tests showed that either documentation or FSP is wrong. Clearing this + * bit here causes full memory training on every boot. + */ u32 disb_val; #if defined(__SIMPLE_DEVICE__) pci_devfn_t dev = PCH_DEV_PMC; -- To view, visit https://review.coreboot.org/c/coreboot/+/36650 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9ca748ddb245cae632e423a417c6a25d52a15354 Gerrit-Change-Number: 36650 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

6 6

Change in coreboot[master]: [WIP]util/inteltool: Add dumping x4x timings
by Arthur Heymans (Code Review) 10 Jun '23

10 Jun '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35812 ) Change subject: [WIP]util/inteltool: Add dumping x4x timings ...................................................................... [WIP]util/inteltool: Add dumping x4x timings TODO DQS RX settings. Change-Id: I8816a3eb43b9a27ea09997e9cc0407c519485943 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M util/inteltool/Makefile M util/inteltool/inteltool.h M util/inteltool/memory.c A util/inteltool/x4x_memory.c 4 files changed, 284 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/35812/1 diff --git a/util/inteltool/Makefile b/util/inteltool/Makefile index cd02fa8..6c7dc80 100644 --- a/util/inteltool/Makefile +++ b/util/inteltool/Makefile @@ -28,7 +28,7 @@ CPPFLAGS += -I$(top)/src/commonlib/include OBJS = inteltool.o pcr.o cpu.o gpio.o gpio_groups.o rootcmplx.o powermgt.o \ - memory.o pcie.o amb.o ivy_memory.o spi.o gfx.o ahci.o \ + memory.o pcie.o amb.o ivy_memory.o spi.o gfx.o ahci.o x4x_memory.o \ OS_ARCH = $(shell uname) ifeq ($(OS_ARCH), Darwin) diff --git a/util/inteltool/inteltool.h b/util/inteltool/inteltool.h index fc6dc4b..cdd42da 100644 --- a/util/inteltool/inteltool.h +++ b/util/inteltool/inteltool.h @@ -400,5 +400,6 @@ int print_ahci(struct pci_dev *ahci); int print_sgx(void); void ivybridge_dump_timings(const char *dump_spd_file); +void x4x_dump_timings(void); #endif diff --git a/util/inteltool/memory.c b/util/inteltool/memory.c index e80f1ba..6fe025d 100644 --- a/util/inteltool/memory.c +++ b/util/inteltool/memory.c @@ -200,6 +200,7 @@ case PCI_DEVICE_ID_INTEL_32X0: mchbar_phys = pci_read_long(nb, 0x48) & 0xfffffffe; mchbar_phys |= ((uint64_t)pci_read_long(nb, 0x4c)) << 32; + x4x_dump_timings(); break; case PCI_DEVICE_ID_INTEL_CORE_1ST_GEN: mchbar_phys = pci_read_long(nb, 0x48); diff --git a/util/inteltool/x4x_memory.c b/util/inteltool/x4x_memory.c new file mode 100644 index 0000000..a00ce82 --- /dev/null +++ b/util/inteltool/x4x_memory.c @@ -0,0 +1,281 @@ +/* + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 or (at your option) any later version of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <inttypes.h> +#include <errno.h> +#include "inteltool.h" + +extern volatile uint8_t *mchbar; + +struct dll_setting { + u8 tap; + u8 pi; + u8 db_en; + u8 db_sel; + u8 clk_delay; + u8 coarse; +}; + +static void print_dll_setting(char *s, const struct dll_setting *dll_setting) +{ + printf("\t%s: %x.%x.%x.%x:%x.%x\n", + s, + dll_setting->coarse, + dll_setting->clk_delay, + dll_setting->tap, + dll_setting->pi, + dll_setting->db_en, + dll_setting->db_sel); +} + + +static uint32_t read_mchbar32(uint32_t addr) +{ + return *(volatile uint32_t *)(mchbar + addr); +} + +static void get_clkset0(u8 channel, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = 0; + reg = read_mchbar32(0x400 * channel + 0x5a0); + setting->clk_delay = (reg >> 14) & 3; + setting->db_sel = (reg >> 6) & 1; + setting->db_en = (reg >> 10) & 1; + reg = read_mchbar32(0x400 * channel + 0x581); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_ctrlset0(u8 channel, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = 0; + reg = read_mchbar32(0x400 * channel + 0x59c); + setting->clk_delay = (reg >> 24) & 3; + setting->db_sel = (reg >> 20) & 1; + setting->db_en = (reg >> 21) & 1; + reg = read_mchbar32(0x400 * channel + 0x584); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_clkset1(u8 channel, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = 0; + reg = read_mchbar32(0x400 * channel + 0x5a0); + setting->clk_delay = (reg >> 16) & 3; + setting->db_sel = (reg >> 7) & 1; + setting->db_en = (reg >> 11) & 1; + reg = read_mchbar32(0x400 * channel + 0x582); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_cmdset(u8 channel, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = 0; + reg = read_mchbar32(0x400 * channel + 0x598); + setting->clk_delay = (reg >> 4) & 3; + reg = read_mchbar32(0x400 * channel + 0x594); + setting->db_sel = (reg >> 5) & 1; + setting->db_en = (reg >> 6) & 1; + reg = read_mchbar32(0x400 * channel + 0x580); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_ctrlset1(u8 channel, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = 0; + reg = read_mchbar32(0x400 * channel + 0x59c); + setting->clk_delay = (reg >> 27) & 3; + setting->db_sel = (reg >> 22) & 1; + setting->db_en = (reg >> 23) & 1; + reg = read_mchbar32(0x400 * channel + 0x585); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_ctrlset2(u8 channel, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = 0; + reg = read_mchbar32(0x400 * channel + 0x598); + setting->clk_delay = (reg >> 14) & 3; + setting->db_sel = (reg >> 12) & 1; + setting->db_en = (reg >> 13) & 1; + reg = read_mchbar32(0x400 * channel + 0x586); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_ctrlset3(u8 channel, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = 0; + reg = read_mchbar32(0x400 * channel + 0x598); + setting->clk_delay = (reg >> 10) & 3; + setting->db_sel = (reg >> 8) & 1; + setting->db_en = (reg >> 9) & 1; + reg = read_mchbar32(0x400 * channel + 0x587); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_dqs(u8 channel, u8 rank, u8 lane, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = (read_mchbar32(0x400 * channel + 0x5fc) >> (lane * 4 +1) & 1); + reg = read_mchbar32(0x400 * channel + rank * 4 + 0x5b4); + setting->db_sel = (reg >> lane) & 1; + setting->db_en = (reg >> (9 + lane)) & 1; + reg = read_mchbar32(0x400 * channel + rank * 4 + 0x5c8); + setting->clk_delay = (reg >> (16 + lane * 2)) & 3; + reg = read_mchbar32(0x400 * channel + rank + lane * 4 + 0x520); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +static void get_dq(u8 channel, u8 rank, u8 lane, struct dll_setting *setting) +{ + u32 reg; + setting->coarse = (read_mchbar32(0x400 * channel + 0x5fc) >> (lane * 4) & 1); + reg = read_mchbar32(0x400 * channel + rank * 4 + 0x5a4); + setting->db_sel = (reg >> lane) & 1; + setting->db_en = (reg >> (9 + lane)) & 1; + reg = read_mchbar32(0x400 * channel + rank * 4 + 0x5c8); + setting->clk_delay = (reg >> (lane * 2)) & 3; + reg = read_mchbar32(0x400 * channel + rank + lane * 4 + 0x500); + setting->pi = (reg >> 4) & 0xf; + setting->tap = reg & 0xf; +} + +void x4x_dump_timings(void) +{ + u32 reg = 0; + + printf("\nG45 Memory controller settings\n==============================\n\n"); + printf("Programmed timings:\n"); + switch (read_mchbar32(0xc00) & 0x7) { + case 0: + reg = 1066; + break; + case 2: + reg = 800; + break; + case 4: + reg = 1333; + break; + default: + printf("Unsupported FSB frequency.\n"); + break; + } + if (reg) + printf("\tFSB freq : %dMHZ\n", reg); + + u32 mem_clk = (read_mchbar32(0xc00) & 0x70) >> 4; + switch (mem_clk) { + case 0: + reg = 400; + break; + case 1: + reg = 533; + break; + case 2: + reg = 667; + break; + case 3: + reg = 800; + break; + case 4: + reg = 1066; + break; + case 5: + reg = 1333; + break; + default: + printf("Unsupported MEM frequency.\n"); + break; + } + if (reg) + printf("\tMEM freq : %dMT\n", reg); + + int is_ddr3 = (read_mchbar32(0x1a8) & 4) >> 2; + printf("\tDDR TYPE : %d\n", is_ddr3 ? 3 : 2); + + u8 tcas, tras, twl, twr, trrd, trp, trfc, trcd, twtr, trtp; + + for (int channel = 0; channel < 2; channel++) { + tcas = (read_mchbar32(0x240 + 0x400 * channel) & 0xf) + 3; + tras = read_mchbar32(0x25d + 0x400 * channel) & 0x3f; + twl = is_ddr3 ? (mem_clk - 3 + 5) : (tcas - 1U); + twr = ((read_mchbar32(0x250 + 0x400 * channel) >> 6) & 0x3f) - twl - 4; + trrd = (read_mchbar32(0x252 + 0x400 * channel) >> 17) & 0x1f; + trp = (read_mchbar32(0x252 + 0x400 * channel) >> 13) & 0x1f; + trfc = read_mchbar32(0x252 + 0x400 * channel) & 0x1ff; + trcd = (read_mchbar32(0x256 + 0x400 * channel) >> 12) & 0xf; + twtr = ((read_mchbar32(0x258 + 0x400 * channel) >> 12) & 0x1f) - 4 - twl; + trtp = ((read_mchbar32(0x250 + 0x400 * channel) >> 2) & 0xf) - 2; + + printf("Channel %d\n", channel); + printf("\ttCAS: %d\n", tcas); + printf("\ttRAS: %d\n", tras); + printf("\ttRP : %d\n", trp); + printf("\ttRCD: %d\n", trcd); + printf("\ttWR : %d\n", twr); + printf("\ttRFC: %d\n", trfc); + printf("\ttWTR: %d\n", twtr); + printf("\ttRRD: %d\n", trrd); + printf("\ttRTP: %d\n", trtp); + printf("\ttWL : %d\n", twl); + } + printf("\nProgrammed delays:\n"); + for (int channel = 0; channel < 2; channel++) { + printf("Channel %d\n", channel); + struct dll_setting setting; + char s[20]; + get_clkset0(channel, &setting); + print_dll_setting("clkset0 ", &setting); + get_ctrlset0(channel, &setting); + print_dll_setting("ctrlset0", &setting); + get_clkset1(channel, &setting); + print_dll_setting("clkset1 ", &setting); + get_cmdset(channel, &setting); + print_dll_setting("cmdset ", &setting); + get_ctrlset1(channel, &setting); + print_dll_setting("ctrlset1", &setting); + get_ctrlset2(channel, &setting); + print_dll_setting("ctrlset2", &setting); + get_ctrlset3(channel, &setting); + print_dll_setting("ctrlset3", &setting); + for (int lane = 0; lane < 8; lane++) { + sprintf(s, "DQS%d ", lane); + /* All rank should be programmed the same */ + get_dqs(channel, 0, lane, &setting); + print_dll_setting(s, &setting); + } + for (int lane = 0; lane < 8; lane++) { + sprintf(s, "DQ%d ", lane); + /* All rank should be programmed the same */ + get_dq(channel, 0, lane, &setting); + print_dll_setting(s, &setting); + } + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/35812 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I8816a3eb43b9a27ea09997e9cc0407c519485943 Gerrit-Change-Number: 35812 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

2 3

Change in coreboot[master]: [TEST_ONLY]:mb/google/hatch/variants/baseboard: Update tcc_offset value
by Sumeet R Pawnikar (Code Review) 10 Jun '23

10 Jun '23

Sumeet R Pawnikar has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36748 ) Change subject: [TEST_ONLY]:mb/google/hatch/variants/baseboard: Update tcc_offset value ...................................................................... [TEST_ONLY]:mb/google/hatch/variants/baseboard: Update tcc_offset value Update tcc_offset value to 5 degree C to test this on i7 Helios systems. Change-Id: Ie319bf1460a5bdeeb86bdf579a24103cac273295 --- M src/mainboard/google/hatch/variants/baseboard/devicetree.cb 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/48/36748/1 diff --git a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb index a2831e1..386df3b 100644 --- a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb @@ -45,7 +45,7 @@ # Enable HPD for DDI ports B/C register "DdiPortBHpd" = "1" register "DdiPortCHpd" = "1" - register "tcc_offset" = "10" # TCC of 90C + register "tcc_offset" = "5" # TCC of 95C # Unlock GPIO pads register "PchUnlockGpioPads" = "1" # SD card WP pin confguration -- To view, visit https://review.coreboot.org/c/coreboot/+/36748 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ie319bf1460a5bdeeb86bdf579a24103cac273295 Gerrit-Change-Number: 36748 Gerrit-PatchSet: 1 Gerrit-Owner: Sumeet R Pawnikar <sumeet.r.pawnikar(a)intel.com> Gerrit-MessageType: newchange

2 1

Change in coreboot[master]: nb/intel/sandybridge: Start VBOOT in bootblock
by Arthur Heymans (Code Review) 10 Jun '23

10 Jun '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36926 ) Change subject: nb/intel/sandybridge: Start VBOOT in bootblock ...................................................................... nb/intel/sandybridge: Start VBOOT in bootblock This also puts romstage in RW fmap regions. Change-Id: Ie79fd70f45d115ead6bb0b238ccea1897ceec2f6 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/northbridge/intel/sandybridge/Kconfig 1 file changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/26/36926/1 diff --git a/src/northbridge/intel/sandybridge/Kconfig b/src/northbridge/intel/sandybridge/Kconfig index 0502b50..2ef6299 100644 --- a/src/northbridge/intel/sandybridge/Kconfig +++ b/src/northbridge/intel/sandybridge/Kconfig @@ -24,7 +24,8 @@ if NORTHBRIDGE_INTEL_SANDYBRIDGE config VBOOT - select VBOOT_STARTS_IN_ROMSTAGE + select VBOOT_STARTS_IN_BOOTBLOCK + select VBOOT_SEPARATE_VERSTAGE config USE_NATIVE_RAMINIT bool "Use native raminit" -- To view, visit https://review.coreboot.org/c/coreboot/+/36926 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ie79fd70f45d115ead6bb0b238ccea1897ceec2f6 Gerrit-Change-Number: 36926 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: [TESTONLY]nb/intel/x4x: force COMMAND 2N mode
by Arthur Heymans (Code Review) 10 Jun '23

10 Jun '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36829 ) Change subject: [TESTONLY]nb/intel/x4x: force COMMAND 2N mode ...................................................................... [TESTONLY]nb/intel/x4x: force COMMAND 2N mode Change-Id: I4348ecdcdf07b025dccd68aae2c1d2599cbdd4f2 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/northbridge/intel/x4x/raminit_ddr23.c 1 file changed, 7 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/29/36829/1 diff --git a/src/northbridge/intel/x4x/raminit_ddr23.c b/src/northbridge/intel/x4x/raminit_ddr23.c index efdcbb6..3626497 100644 --- a/src/northbridge/intel/x4x/raminit_ddr23.c +++ b/src/northbridge/intel/x4x/raminit_ddr23.c @@ -234,13 +234,13 @@ /* Default 2N mode */ s->nmode = 2; - if (s->selected_timings.mem_clk <= MEM_CLOCK_1066MHz) - s->nmode = 1; - /* 2N on DDR3 1066 with with 2 dimms per channel */ - if ((s->selected_timings.mem_clk == MEM_CLOCK_1066MHz) && - (BOTH_DIMMS_ARE_POPULATED(s->dimms, 0) || - BOTH_DIMMS_ARE_POPULATED(s->dimms, 1))) - s->nmode = 2; + /* if (s->selected_timings.mem_clk <= MEM_CLOCK_1066MHz) */ + /* s->nmode = 1; */ + /* /\* 2N on DDR3 1066 with with 2 dimms per channel *\/ */ + /* if ((s->selected_timings.mem_clk == MEM_CLOCK_1066MHz) && */ + /* (BOTH_DIMMS_ARE_POPULATED(s->dimms, 0) || */ + /* BOTH_DIMMS_ARE_POPULATED(s->dimms, 1))) */ + /* s->nmode = 2; */ launch1 = ddr3_launch1_tab[s->nmode - 1] [s->selected_timings.mem_clk - MEM_CLOCK_800MHz]; launch2 = ddr3_launch2_tab[s->nmode - 1] -- To view, visit https://review.coreboot.org/c/coreboot/+/36829 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4348ecdcdf07b025dccd68aae2c1d2599cbdd4f2 Gerrit-Change-Number: 36829 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

2 4

Change in coreboot[master]: TEST ONLY: DO NOT MERGE
by Casper Chang (Code Review) 10 Jun '23

10 Jun '23

Casper Chang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36766 ) Change subject: TEST ONLY: DO NOT MERGE ...................................................................... TEST ONLY: DO NOT MERGE Change-Id: I53ef63261537acdaf74edc13047a3e5e499e749f --- A src/mainboard/google/kukui/TESTONLY 1 file changed, 0 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/36766/1 diff --git a/src/mainboard/google/kukui/TESTONLY b/src/mainboard/google/kukui/TESTONLY new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/google/kukui/TESTONLY -- To view, visit https://review.coreboot.org/c/coreboot/+/36766 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I53ef63261537acdaf74edc13047a3e5e499e749f Gerrit-Change-Number: 36766 Gerrit-PatchSet: 1 Gerrit-Owner: Casper Chang <casper.chang(a)bitland.corp-partner.google.com> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: soc/mediatek/mt8183: Always run full calibration for debug DRAM issue...
by huayang duan (Code Review) 10 Jun '23

10 Jun '23

huayang duan has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36906 ) Change subject: soc/mediatek/mt8183: Always run full calibration for debug DRAM issue [DONOT MERGE] Disable fast calibration, that is always run full calibration for debug DRAM bitfilp issue. ...................................................................... soc/mediatek/mt8183: Always run full calibration for debug DRAM issue [DONOT MERGE] Disable fast calibration, that is always run full calibration for debug DRAM bitfilp issue. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I693cfe98ea4317c4b856e9bb1f18046a10fe72f8 --- M src/soc/mediatek/mt8183/memory.c 1 file changed, 6 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/36906/1 diff --git a/src/soc/mediatek/mt8183/memory.c b/src/soc/mediatek/mt8183/memory.c index 13c3d9a..fafe2a6 100644 --- a/src/soc/mediatek/mt8183/memory.c +++ b/src/soc/mediatek/mt8183/memory.c @@ -170,6 +170,11 @@ if (CONFIG(MT8183_DRAM_DVFS) && !recovery_mode) config |= DRAMC_CONFIG_DVFS; + +printk(BIOS_ERR, "DRAM-K: Force disable Fast Calibration for debug DRAM issue\n"); + +// disable fast calibration for debug DRAM issue +if (0) { /* Load calibration params from flash and run fast calibration */ if (recovery_mode) { printk(BIOS_WARNING, "Skip loading cached calibration data\n"); @@ -195,6 +200,7 @@ printk(BIOS_WARNING, "Failed to read calibration data from flash\n"); } +} /* Run full calibration */ printk(BIOS_INFO, "DRAM-K: Full Calibration\n"); -- To view, visit https://review.coreboot.org/c/coreboot/+/36906 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I693cfe98ea4317c4b856e9bb1f18046a10fe72f8 Gerrit-Change-Number: 36906 Gerrit-PatchSet: 1 Gerrit-Owner: huayang duan <huayangduan(a)gmail.com> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: amd/bettong: Enable SATA controller
by Jorge Fernandez (Code Review) 10 Jun '23

10 Jun '23

Jorge Fernandez has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37618 ) Change subject: amd/bettong: Enable SATA controller ...................................................................... amd/bettong: Enable SATA controller A minor typo fixed and the SATA controller is enabled on FCH reset. Change-Id: Ib5a66a99379f53b7376dd69e58bb4c1cb082f20b Signed-off-by: Jorge Fernandez <jorgefm(a)cirsa.com> --- M src/mainboard/amd/bettong/BiosCallOuts.c 1 file changed, 5 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/18/37618/1 diff --git a/src/mainboard/amd/bettong/BiosCallOuts.c b/src/mainboard/amd/bettong/BiosCallOuts.c index e983690..3d2aa48 100644 --- a/src/mainboard/amd/bettong/BiosCallOuts.c +++ b/src/mainboard/amd/bettong/BiosCallOuts.c @@ -60,7 +60,7 @@ */ static void oem_fan_control(FCH_DATA_BLOCK *FchParams) { - /* Enable IMC fan control. the recommand way */ + /* Enable IMC fan control. the recommended way */ imc_reg_init(); FchParams->Imc.ImcEnable = TRUE; @@ -87,6 +87,10 @@ FchParams_reset->FchReset.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE); FchParams_reset->FchReset.Xhci1Enable = FALSE; FchParams_reset->EarlyOemGpioTable = oem_bettong_gpio; + + /* SATA configuration */ + FchParams_reset->FchReset.SataEnable = TRUE; + } else if (StdHeader->Func == AMD_INIT_ENV) { FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); @@ -103,7 +107,6 @@ FchParams_env->Usb.Xhci1Enable = FALSE; FchParams_env->Usb.USB30PortInit = 8; /* 8: If USB3 port is unremoveable. */ - /* sata configuration */ /* SD configuration */ /* Rev F has an on-board eMMC, which only supports SD 2.0 */ if (board_id() == 'F') { -- To view, visit https://review.coreboot.org/c/coreboot/+/37618 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib5a66a99379f53b7376dd69e58bb4c1cb082f20b Gerrit-Change-Number: 37618 Gerrit-PatchSet: 1 Gerrit-Owner: Jorge Fernandez Gerrit-MessageType: newchange

3 4

Change in coreboot[master]: [TEST-ONLY] Enable compliance mode for test
by Peichao Li (Code Review) 10 Jun '23

10 Jun '23

Peichao Li has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37323 ) Change subject: [TEST-ONLY] Enable compliance mode for test ...................................................................... [TEST-ONLY] Enable compliance mode for test BUG=None TEST=compliance mode test Signed-off-by: Peichao Wang <peichao.wang(a)bitland.corp-partner.google.com> Change-Id: Ieb65c2062352ae12b3355381a14d8ab66677febe --- M src/soc/intel/cannonlake/fsp_params.c 1 file changed, 3 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/37323/1 diff --git a/src/soc/intel/cannonlake/fsp_params.c b/src/soc/intel/cannonlake/fsp_params.c index 0713ef4..f533d04 100644 --- a/src/soc/intel/cannonlake/fsp_params.c +++ b/src/soc/intel/cannonlake/fsp_params.c @@ -218,6 +218,9 @@ ignore_gbe_ltr(); } } + + /* enable compliance mode */ + params->PchEnableComplianceMode = 1; /* Audio */ params->PchHdaDspEnable = config->PchHdaDspEnable; -- To view, visit https://review.coreboot.org/c/coreboot/+/37323 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ieb65c2062352ae12b3355381a14d8ab66677febe Gerrit-Change-Number: 37323 Gerrit-PatchSet: 1 Gerrit-Owner: Peichao Li <peichao.wang(a)bitland.corp-partner.google.com> Gerrit-MessageType: newchange

3 5

Change in coreboot[master]: [TEST]cpu/x86/mp_init: Park APs in C7
by Nico Huber (Code Review) 10 Jun '23

10 Jun '23

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37007 ) Change subject: [TEST]cpu/x86/mp_init: Park APs in C7 ...................................................................... [TEST]cpu/x86/mp_init: Park APs in C7 Change-Id: I960871450407ade6e8f18e69921ce74aa7fbca24 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M src/cpu/x86/mp_init.c 1 file changed, 16 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/37007/1 diff --git a/src/cpu/x86/mp_init.c b/src/cpu/x86/mp_init.c index 29ae3de..16435fc 100644 --- a/src/cpu/x86/mp_init.c +++ b/src/cpu/x86/mp_init.c @@ -184,7 +184,22 @@ static void park_this_cpu(void *unused) { - stop_this_cpu(); + /* need some address of write-back memory, use AP's stack for now */ + const struct cpu_info *const info = cpu_info(); + const uintptr_t stack_bottom = ALIGN_DOWN((uintptr_t)&_estack, CONFIG_STACK_SIZE) + - (info->index + 1) * CONFIG_STACK_SIZE; + asm volatile( + "xor %%ecx, %%ecx\n\t" + "xor %%edx, %%edx\n" + "__monitor:\n\t" + "mov %0, %%eax\n\t" + "monitor\n\t" + "mov $0x60, %%eax\n\t" + "mwait\n\t" + "jmp __monitor\n\t" + : + : "r" (stack_bottom) + : "eax", "ecx", "edx"); } /* By the time APs call ap_init() caching has been setup, and microcode has -- To view, visit https://review.coreboot.org/c/coreboot/+/37007 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I960871450407ade6e8f18e69921ce74aa7fbca24 Gerrit-Change-Number: 37007 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

5 7

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit June 2022