coreboot-gerrit March 2022

coreboot-gerrit@coreboot.org

1 participants
6700 discussions

Change in coreboot[master]: drivers/tpm/cr50: Use cr50_get_firmware_version in get_board_cfg
by Julius Werner (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: Tim Wawrzynczak, Nick Vaccaro. Julius Werner has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62964 ) Change subject: drivers/tpm/cr50: Use cr50_get_firmware_version in get_board_cfg ...................................................................... Patch Set 4: Code-Review+2 -- To view, visit https://review.coreboot.org/c/coreboot/+/62964 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia6e5f4965a8852793d2f95e6eb21ea87860335a9 Gerrit-Change-Number: 62964 Gerrit-PatchSet: 4 Gerrit-Owner: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)google.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)google.com> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:25:44 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

Change in coreboot[master]: mb/google/brya/var/brya0: Replace amp max98357 with max98360
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: Frank Wu, Eric Lai, Amanda Hwang. Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62998 ) Change subject: mb/google/brya/var/brya0: Replace amp max98357 with max98360 ...................................................................... Patch Set 1: Code-Review+1 (1 comment) File src/mainboard/google/brya/variants/brya0/overridetree.cb: https://review.coreboot.org/c/coreboot/+/62998/comment/0b68d234_7d8a4993 PS1, Line 15: option AUDIO_UNKNOWN 0 : option MAX98357_ALC5682I_I2S 1 : option MAX98373_ALC5682_SNDW 2 : option MAX98373_NAU88L25B_I2S 3 : option ALC1019_NAU88L25B_I2S 4 : option MAX98360_ALC5682I_I2S_AMP_SSP2 5 can you please align the right-hand side of all of these to match? -- To view, visit https://review.coreboot.org/c/coreboot/+/62998 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3033e31cf5c2dade02dc19531f5e5365eeeb7a78 Gerrit-Change-Number: 62998 Gerrit-PatchSet: 1 Gerrit-Owner: Amanda Hwang <amanda_hwang(a)compal.corp-partner.google.com> Gerrit-Reviewer: Eric Lai <eric_lai(a)quanta.corp-partner.google.com> Gerrit-Reviewer: Frank Wu <frank_wu(a)compal.corp-partner.google.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Van Chen <van_chen(a)compal.corp-partner.google.com> Gerrit-Attention: Frank Wu <frank_wu(a)compal.corp-partner.google.com> Gerrit-Attention: Eric Lai <eric_lai(a)quanta.corp-partner.google.com> Gerrit-Attention: Amanda Hwang <amanda_hwang(a)compal.corp-partner.google.com> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:14:34 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

Change in coreboot[master]: soc/intel: Move `pmc_clear_pmcon_sts()` into IA common code
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: Felix Singer, Jeff Daly, Mariusz Szafrański, Jonathan Zhang, Arthur Heymans, Michael Niewöhner, Andrey Petrov, Patrick Rudolph, Nico Huber, Anjaneya "Reddy" Chagam, Subrata Banik, Johnny Lin, Suresh Bellampalli, Christian Walter, Vanessa Eusebio, Lean Sheng Tan, Michal Motyl, Werner Zeh, Tim Chu. Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62064 ) Change subject: soc/intel: Move `pmc_clear_pmcon_sts()` into IA common code ...................................................................... Patch Set 13: Code-Review+1 -- To view, visit https://review.coreboot.org/c/coreboot/+/62064 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I8d15f421c128630f928a1b6a7e2840056d68d7b1 Gerrit-Change-Number: 62064 Gerrit-PatchSet: 13 Gerrit-Owner: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Andrey Petrov <andrey.petrov(a)gmail.com> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Anjaneya "Reddy" Chagam <anjaneya.chagam(a)intel.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Christian Walter <christian.walter(a)9elements.com> Gerrit-Reviewer: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Jeff Daly <jeffd(a)silicom-usa.com> Gerrit-Reviewer: Johnny Lin <Johnny_Lin(a)wiwynn.com> Gerrit-Reviewer: Jonathan Zhang <jonzhang(a)fb.com> Gerrit-Reviewer: Lean Sheng Tan <sheng.tan(a)9elements.com> Gerrit-Reviewer: Mariusz Szafrański <mariuszx.szafranski(a)intel.com> Gerrit-Reviewer: Michael Niewöhner <foss(a)mniewoehner.de> Gerrit-Reviewer: Michal Motyl <michalx.motyl(a)intel.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Suresh Bellampalli <suresh.bellampalli(a)intel.com> Gerrit-Reviewer: Tim Chu <Tim.Chu(a)quantatw.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: Vanessa Eusebio <vanessa.f.eusebio(a)intel.com> Gerrit-Reviewer: Werner Zeh <werner.zeh(a)siemens.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Reviewer: siemens-bot Gerrit-CC: Nico Huber <nico.h(a)gmx.de> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Felix Singer <felixsinger(a)posteo.net> Gerrit-Attention: Jeff Daly <jeffd(a)silicom-usa.com> Gerrit-Attention: Mariusz Szafrański <mariuszx.szafranski(a)intel.com> Gerrit-Attention: Jonathan Zhang <jonzhang(a)fb.com> Gerrit-Attention: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Attention: Michael Niewöhner <foss(a)mniewoehner.de> Gerrit-Attention: Andrey Petrov <andrey.petrov(a)gmail.com> Gerrit-Attention: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Anjaneya "Reddy" Chagam <anjaneya.chagam(a)intel.com> Gerrit-Attention: Subrata Banik <subratabanik(a)google.com> Gerrit-Attention: Johnny Lin <Johnny_Lin(a)wiwynn.com> Gerrit-Attention: Suresh Bellampalli <suresh.bellampalli(a)intel.com> Gerrit-Attention: Christian Walter <christian.walter(a)9elements.com> Gerrit-Attention: Vanessa Eusebio <vanessa.f.eusebio(a)intel.com> Gerrit-Attention: Lean Sheng Tan <sheng.tan(a)9elements.com> Gerrit-Attention: Michal Motyl <michalx.motyl(a)intel.com> Gerrit-Attention: Werner Zeh <werner.zeh(a)siemens.com> Gerrit-Attention: Tim Chu <Tim.Chu(a)quantatw.com> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:12:45 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

Change in coreboot[master]: driver/i2c/sx9360: Add pre-charge resistance setting
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: Paul Menzel, Gwendal Grignou. Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62842 ) Change subject: driver/i2c/sx9360: Add pre-charge resistance setting ...................................................................... Patch Set 3: Code-Review+1 (2 comments) Commit Message: https://review.coreboot.org/c/coreboot/+/62842/comment/190f2759_8f6379eb PS3, Line 14: is there a BUG? File src/drivers/i2c/sx9360/chip.h: https://review.coreboot.org/c/coreboot/+/62842/comment/80e6537d_cddf4def PS1, Line 39: /* Precharge input resistance. Driver default: 0. */ > Looks like the field is 5 bits, and the unit is just ohms? can we add that information here? Done -- To view, visit https://review.coreboot.org/c/coreboot/+/62842 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I197b88d92784015b94c836dc128bacf3f1ef5b62 Gerrit-Change-Number: 62842 Gerrit-PatchSet: 3 Gerrit-Owner: Gwendal Grignou <gwendal(a)chromium.org> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Gwendal Grignou <gwendal(a)chromium.org> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:11:42 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Comment-In-Reply-To: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-MessageType: comment

1 0

Change in coreboot[master]: soc/intel/alderlake: Log CSE RO write protection info for ADL
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: Sridhar Siricilla. Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62987 ) Change subject: soc/intel/alderlake: Log CSE RO write protection info for ADL ...................................................................... Patch Set 3: (1 comment) File src/soc/intel/alderlake/me.c: https://review.coreboot.org/c/coreboot/+/62987/comment/c11e8f3e_bcbff8ac PS3, Line 179: assert if you use `die()` you can at least get a message on the screen. -- To view, visit https://review.coreboot.org/c/coreboot/+/62987 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I766d5358bb7dd495b4a9b22a2f1b41dc90f3d8d5 Gerrit-Change-Number: 62987 Gerrit-PatchSet: 3 Gerrit-Owner: Sridhar Siricilla <sridhar.siricilla(a)intel.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Sridhar Siricilla <sridhar.siricilla(a)intel.com> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:10:16 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

Change in coreboot[master]: soc/intel/common: Add APIs to check CSE's write protection info
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: Subrata Banik, Sridhar Siricilla. Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62986 ) Change subject: soc/intel/common: Add APIs to check CSE's write protection info ...................................................................... Patch Set 3: Code-Review+1 (1 comment) File src/soc/intel/common/block/spi/spi.c: https://review.coreboot.org/c/coreboot/+/62986/comment/12d34d22_82368f45 PS3, Line 53: #if ENV_RAMSTAGE Is this required? -- To view, visit https://review.coreboot.org/c/coreboot/+/62986 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If1da0fc410a15996f2e139809f7652127ef8761b Gerrit-Change-Number: 62986 Gerrit-PatchSet: 3 Gerrit-Owner: Sridhar Siricilla <sridhar.siricilla(a)intel.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Subrata Banik <subratabanik(a)google.com> Gerrit-Attention: Sridhar Siricilla <sridhar.siricilla(a)intel.com> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:09:02 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

Change in coreboot[master]: mb/google/brya/var/taeko: Add new FW_CONFIG option for THERMAL
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: YH Lin, Joey Peng, Paul Menzel. Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62954 ) Change subject: mb/google/brya/var/taeko: Add new FW_CONFIG option for THERMAL ...................................................................... Patch Set 6: (1 comment) Patchset: PS6: you will probably still need critical policies and the fan table, etc. here too -- To view, visit https://review.coreboot.org/c/coreboot/+/62954 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I37f79cde502115bbf65bb97216eddb6ea22b1648 Gerrit-Change-Number: 62954 Gerrit-PatchSet: 6 Gerrit-Owner: Joey Peng <joey.peng(a)lcfc.corp-partner.google.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: YH Lin <yueherngl(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Jerry2 Huang <jerry2.huang(a)lcfc.corp-partner.google.com> Gerrit-CC: Kevin Chang <kevin.chang(a)lcfc.corp-partner.google.com> Gerrit-CC: Melo Chuang <melo.chuang(a)lcfc.corp-partner.google.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Rasheed Hsueh <rasheed.hsueh(a)lcfc.corp-partner.google.com> Gerrit-CC: Sunshine Chao <sunshine.chao(a)lcfc.corp-partner.google.com> Gerrit-Attention: YH Lin <yueherngl(a)google.com> Gerrit-Attention: Joey Peng <joey.peng(a)lcfc.corp-partner.google.com> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:02:56 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

Change in coreboot[master]: mb/google/brask/variants/moli: init overridetree for moli
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Tim Wawrzynczak has submitted this change. ( https://review.coreboot.org/c/coreboot/+/62321 ) Change subject: mb/google/brask/variants/moli: init overridetree for moli ...................................................................... mb/google/brask/variants/moli: init overridetree for moli init overridetree.cb based on the schematic adl_rfq_mb_20220310.pdf BUG=b:220814038 Signed-off-by: Raihow Shi <raihow_shi(a)wistron.corp-partner.google.com> Change-Id: I8829d4b39d48ae574eeccbfc62e79b671211ae2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62321 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak(a)chromium.org> --- M src/mainboard/google/brya/variants/moli/overridetree.cb 1 file changed, 229 insertions(+), 3 deletions(-) Approvals: build bot (Jenkins): Verified Tim Wawrzynczak: Looks good to me, approved diff --git a/src/mainboard/google/brya/variants/moli/overridetree.cb b/src/mainboard/google/brya/variants/moli/overridetree.cb index 4f2c04a..a11f8e9 100644 --- a/src/mainboard/google/brya/variants/moli/overridetree.cb +++ b/src/mainboard/google/brya/variants/moli/overridetree.cb @@ -1,6 +1,232 @@ +fw_config + field DB_OPT 2 3 + option OPT_ABSENT 0 + option OPT_HDMI 1 + option OPT_DP 2 + end +end chip soc/intel/alderlake - - device domain 0 on - end + # Enable HDMI2 in PortA, HDMI1 in PortB, HDMI/DP in Port2 + register "ddi_ports_config" = "{ + [DDI_PORT_A] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + [DDI_PORT_2] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + }" + register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2_Type-A Port A2 + register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC2)" # USB2_Type-A Port A3 + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Disable USB2_Type-A Port A9 + register "tcss_ports[2]" = "TCSS_PORT_EMPTY" # Disable TCP3 + register "CnviBtAudioOffload" = "true" + device domain 0 on + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port1 as dfp[0].typec_port + device generic 0 on end + end + end + device ref pcie4_0 on + # Enable CPU PCIE RP 1 using CLK 0 + register "cpu_pcie_rp[CPU_RP(1)]" = "{ + .clk_req = 0, + .clk_src = 0, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end # SSD gen4 + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end # WiFi + device ref i2c0 on + chip drivers/i2c/nau8825 + register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" + register "jkdet_pull_up" = "0" + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0C" + register "sar_threshold[1]" = "0x1C" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "6" + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on end + end + end # Audio Nau8825 + device ref pcie_rp6 on + # Enable PCIe-to-i225 bridge PCIe 6 using clk 5 + register "pch_pcie_rp[PCH_RP(6)]" = "{ + .clk_src = 5, + .clk_req = 5, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + device pci 00.0 on end + end # IntelI225V Ethernet NIC + device ref pcie_rp7 on + chip drivers/net + register "customized_leds" = "0x05af" + register "wake" = "GPE0_DW0_07" + register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H22)" + register "stop_delay_ms" = "12" # NIC needs time to quiesce + register "stop_off_delay_ms" = "1" + register "has_power_resource" = "1" + register "device_index" = "0" + device pci 00.0 on end + end + end # RTL8111K Ethernet NIC + device ref pcie_rp8 on + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)" + register "srcclk_pin" = "3" + device generic 0 on end + end + end # PCIE8 SD card + device ref pcie_rp9 off end #pcie_rp 9 Empty + device ref pcie_rp10 off end #pcie_rp 10 Empty + device ref pcie_rp11 off end #pcie_rp 11 Empty + device ref pcie_rp12 on + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E20)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B3)" + register "srcclk_pin" = "1" + device generic 0 alias emmc_rtd3 on end + end # Enable PCIe-to-eMMC bridge PCIE 12 using clk 1 + register "pch_pcie_rp[PCH_RP(12)]" = "{ + .clk_src = 1, + .clk_req = 1, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end # PCIE12 BH799BB + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 0 alias conn0 on end + end + end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C2 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port2 on end + end + end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C2 (MLB)"" + register "type" = "UPC_TYPE_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A4 (MLB)"" + register "type" = "UPC_TYPE_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb2_port4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 NFC"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A3 (MLB)"" + register "type" = "UPC_TYPE_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(5, 1))" + device ref usb2_port6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A2 (MLB)"" + register "type" = "UPC_TYPE_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(6, 1))" + device ref usb2_port7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1 (MLB)"" + register "type" = "UPC_TYPE_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, CENTER, ACPI_PLD_GROUP(7, 1))" + device ref usb2_port8 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, CENTER, ACPI_PLD_GROUP(7, 2))" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A2 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, LEFT, ACPI_PLD_GROUP(6, 1))" + device ref usb3_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A3 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(5, 1))" + device ref usb3_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A4 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb3_port4 on end + end + end + end + end #USB2 and USB3 Port + device ref i2c1 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)" + device i2c 50 on end + end + end # tpm + end end -- To view, visit https://review.coreboot.org/c/coreboot/+/62321 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I8829d4b39d48ae574eeccbfc62e79b671211ae2d Gerrit-Change-Number: 62321 Gerrit-PatchSet: 33 Gerrit-Owner: Raihow Shi <raihow_shi(a)wistron.corp-partner.google.com> Gerrit-Reviewer: EricR Lai <ericr_lai(a)compal.corp-partner.google.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: YH Lin <yueherngl(a)google.com> Gerrit-Reviewer: Zhuohao Lee <zhuohao(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: 9elements QA <hardwaretestrobot(a)gmail.com> Gerrit-CC: Anfernee Chen <anfernee_chen(a)wistron.corp-partner.google.com> Gerrit-CC: Ariel Fang <ariel_fang(a)wistron.corp-partner.google.com> Gerrit-CC: Casper Chang <casper_chang(a)wistron.corp-partner.google.com> Gerrit-CC: Johnny Li <johnny_li(a)wistron.corp-partner.google.com> Gerrit-CC: Malik Hsu <malik_hsu(a)wistron.com> Gerrit-CC: Mark Hsieh <mark_hsieh(a)wistron.corp-partner.google.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Peter Chi <peter_chi(a)wistron.corp-partner.google.com> Gerrit-CC: Scott Chao <scott_chao(a)wistron.corp-partner.google.com> Gerrit-CC: Terry Chen <terry_chen(a)wistron.corp-partner.google.com> Gerrit-CC: Will Tsai <will_tsai(a)wistron.corp-partner.google.com> Gerrit-CC: Zoey Wu <zoey_wu(a)wistron.corp-partner.google.com> Gerrit-MessageType: merged

1 0

Change in coreboot[master]: mb/google/brya/variants/crota: set up gpio
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Tim Wawrzynczak has submitted this change. ( https://review.coreboot.org/c/coreboot/+/62854 ) Change subject: mb/google/brya/variants/crota: set up gpio ...................................................................... mb/google/brya/variants/crota: set up gpio Set the GPIO configuration of crota by bernadino 14 adl-p 20220112.pdf BUG=b:219891328 Signed-off-by: Terry Chen <terry_chen(a)wistron.corp-partner.google.com> Change-Id: I164bc7a8b682eb8682f02b06708bc7c72a5c449a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62854 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak(a)chromium.org> --- A src/mainboard/google/brya/variants/crota/Makefile.inc A src/mainboard/google/brya/variants/crota/gpio.c 2 files changed, 172 insertions(+), 0 deletions(-) Approvals: build bot (Jenkins): Verified Tim Wawrzynczak: Looks good to me, approved diff --git a/src/mainboard/google/brya/variants/crota/Makefile.inc b/src/mainboard/google/brya/variants/crota/Makefile.inc new file mode 100644 index 0000000..6c29346 --- /dev/null +++ b/src/mainboard/google/brya/variants/crota/Makefile.inc @@ -0,0 +1,5 @@ +bootblock-y += gpio.c + +romstage-y += gpio.c + +ramstage-y += gpio.c diff --git a/src/mainboard/google/brya/variants/crota/gpio.c b/src/mainboard/google/brya/variants/crota/gpio.c new file mode 100644 index 0000000..ad13426 --- /dev/null +++ b/src/mainboard/google/brya/variants/crota/gpio.c @@ -0,0 +1,167 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A19 : DDSP_HPD1 ==> NC */ + PAD_NC(GPP_A19, NONE), + /* A20 : DDSP_HPD2 ==> NC */ + PAD_NC(GPP_A20, NONE), + /* A21 : DDPC_CTRCLK ==> NC */ + PAD_NC(GPP_A21, NONE), + /* A22 : DDPC_CTRLDATA ==> NC */ + PAD_NC(GPP_A22, NONE), + + /* C3 : SML0CLK ==> SML0_SMBCLK */ + PAD_CFG_GPO(GPP_C3, 0, DEEP), + /* C4 : SML0DATA ==> SML0_SMBDATA */ + PAD_CFG_GPO(GPP_C4, 0, DEEP), + + /* D3 : ISH_GP3 ==> NC */ + PAD_NC(GPP_D3, NONE), + /* D5 : SRCCLKREQ0# ==> SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), + /* D6 : SRCCLKREQ1# ==> EMMC_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), + /* D13 : ISH_UART0_RXD ==> NC */ + PAD_NC(GPP_D13, NONE), + /* D14 : ISH_UART0_TXD ==> NC */ + PAD_NC(GPP_D14, NONE), + /* D15 : ISH_UART0_RTS# ==> NC */ + PAD_NC(GPP_D15, NONE), + /* D19 : I2S_MCLK1_OUT ==> NC */ + PAD_NC(GPP_D19, NONE), + + /* E3 : PROC_GP0 ==> NC */ + PAD_NC(GPP_E3, NONE), + /* E5 : SATA_DEVSLP1 ==> NC */ + PAD_NC(GPP_E5, NONE), + /* E7 : PROC_GP1 ==> NC */ + PAD_NC(GPP_E7, NONE), + /* E20 : DDP2_CTRLCLK ==> NC */ + PAD_NC(GPP_E20, NONE), + /* E21 : DDP2_CTRLDATA ==> NC */ + PAD_NC(GPP_E21, NONE), + /* E22 : DDPA_CTRLCLK ==> NC */ + PAD_NC(GPP_E22, NONE), + /* E23 : DDPA_CTRLDATA ==> NC */ + PAD_NC(GPP_E23, NONE), + + /* F20 : EXT_PWR_GATE# ==> NC */ + PAD_NC(GPP_F20, NONE), + + /* H21 : IMGCLKOUT2 ==> VPRO_STRAP */ + PAD_CFG_GPI(GPP_H21, NONE, DEEP), + /* H22 : IMGCLKOUT3 ==> NC */ + PAD_NC(GPP_H22, NONE), + + /* R4 : HDA_RST# ==> DMIC_CLK0_R */ + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), + /* R5 : HDA_SDI1 ==> DMIC_DATA0_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), + /* R6 : I2S2_TXD ==> NC */ + PAD_NC(GPP_R6, NONE), + /* R7 : I2S2_RXD ==> NC */ + PAD_NC(GPP_R7, NONE), + + /* S0 : SNDW0_CLK ==> I2S_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), + /* S1 : SNDW0_DATA ==> I2S_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), + /* S2 : SNDW1_CLK ==> I2S_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), + /* S3 : SNDW1_DATA ==> I2S_PCH_RX_SPKR_TX */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), + /* S4 : SNDW2_CLK ==> NC */ + PAD_NC(GPP_S4, NONE), + /* S5 : SNDW2_DATA ==> NC */ + PAD_NC(GPP_S5, NONE), + /* S6 : SNDW3_CLK ==> NC */ + PAD_NC(GPP_S6, NONE), + /* S7 : SNDW3_DATA ==> NC */ + PAD_NC(GPP_S7, NONE), + + /* T2 : GPP_T2 ==> eMMC_CFG */ + PAD_CFG_GPI(GPP_T2, NONE, DEEP), + + /* GPD11: LANPHYC ==> NC */ + PAD_NC(GPD11, NONE), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */ + PAD_CFG_GPO(GPP_A12, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B3 : PROC_GP2 ==> eMMC_PERST_L */ + PAD_CFG_GPO(GPP_B3, 0, DEEP), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), + /* H6 : I2C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : I2C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_D11, 1, DEEP), + /* D18 : UART1_TXD ==> SD_PE_RST_L */ + PAD_CFG_GPO(GPP_D18, 0, PLTRST), + /* E0 : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E0, 0, DEEP), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E16, 0, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */ + PAD_CFG_GPO(GPP_F21, 0, DEEP), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_CFG_GPO(GPP_H13, 1, PLTRST), +}; + +static const struct pad_config romstage_gpio_table[] = { + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 1, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (set here for correct power sequencing) */ + PAD_CFG_GPO(GPP_F21, 1, DEEP), +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +const struct pad_config *variant_romstage_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(romstage_gpio_table); + return romstage_gpio_table; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/62854 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I164bc7a8b682eb8682f02b06708bc7c72a5c449a Gerrit-Change-Number: 62854 Gerrit-PatchSet: 9 Gerrit-Owner: Terry Chen <terry_chen(a)wistron.corp-partner.google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)google.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: YH Lin <yueherngl(a)chromium.org> Gerrit-Reviewer: Zhuohao Lee <zhuohao(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Anfernee Chen <anfernee_chen(a)wistron.corp-partner.google.com> Gerrit-CC: Casper Chang <casper_chang(a)wistron.corp-partner.google.com> Gerrit-CC: Malik Hsu <malik_hsu(a)wistron.com> Gerrit-CC: Mark Hsieh <mark_hsieh(a)wistron.corp-partner.google.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Peter Chi <peter_chi(a)wistron.corp-partner.google.com> Gerrit-CC: Scott Chao <scott_chao(a)wistron.corp-partner.google.com> Gerrit-MessageType: merged

1 0

Change in coreboot[master]: mb/google/brask/variants/moli: init overridetree for moli
by Tim Wawrzynczak (Code Review) 22 Mar '22

22 Mar '22

Attention is currently required from: Raihow Shi. Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/62321 ) Change subject: mb/google/brask/variants/moli: init overridetree for moli ...................................................................... Patch Set 32: Code-Review+2 -- To view, visit https://review.coreboot.org/c/coreboot/+/62321 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I8829d4b39d48ae574eeccbfc62e79b671211ae2d Gerrit-Change-Number: 62321 Gerrit-PatchSet: 32 Gerrit-Owner: Raihow Shi <raihow_shi(a)wistron.corp-partner.google.com> Gerrit-Reviewer: EricR Lai <ericr_lai(a)compal.corp-partner.google.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Tim Wawrzynczak <twawrzynczak(a)chromium.org> Gerrit-Reviewer: YH Lin <yueherngl(a)google.com> Gerrit-Reviewer: Zhuohao Lee <zhuohao(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: 9elements QA <hardwaretestrobot(a)gmail.com> Gerrit-CC: Anfernee Chen <anfernee_chen(a)wistron.corp-partner.google.com> Gerrit-CC: Ariel Fang <ariel_fang(a)wistron.corp-partner.google.com> Gerrit-CC: Casper Chang <casper_chang(a)wistron.corp-partner.google.com> Gerrit-CC: Johnny Li <johnny_li(a)wistron.corp-partner.google.com> Gerrit-CC: Malik Hsu <malik_hsu(a)wistron.com> Gerrit-CC: Mark Hsieh <mark_hsieh(a)wistron.corp-partner.google.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Peter Chi <peter_chi(a)wistron.corp-partner.google.com> Gerrit-CC: Scott Chao <scott_chao(a)wistron.corp-partner.google.com> Gerrit-CC: Terry Chen <terry_chen(a)wistron.corp-partner.google.com> Gerrit-CC: Will Tsai <will_tsai(a)wistron.corp-partner.google.com> Gerrit-CC: Zoey Wu <zoey_wu(a)wistron.corp-partner.google.com> Gerrit-Attention: Raihow Shi <raihow_shi(a)wistron.corp-partner.google.com> Gerrit-Comment-Date: Tue, 22 Mar 2022 19:00:04 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit March 2022