coreboot-gerrit February 2022

coreboot-gerrit@coreboot.org

1 participants
6476 discussions

Change in coreboot[master]: sb/intel/i82371eb: Leave I/O ports 0x2e-0x2f unclaimed
by Keith Hui (Code Review) 16 Feb '23

16 Feb '23

Keith Hui has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41458 ) Change subject: sb/intel/i82371eb: Leave I/O ports 0x2e-0x2f unclaimed ...................................................................... sb/intel/i82371eb: Leave I/O ports 0x2e-0x2f unclaimed This change reflects vendor setup for asus/p3b-f. Change-Id: I11972b650d95a48e4d372defe201cc9e743d5b30 Signed-off-by: Keith Hui <buurin(a)gmail.com> --- M src/southbridge/intel/i82371eb/acpi/i82371eb.asl 1 file changed, 3 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/41458/1 diff --git a/src/southbridge/intel/i82371eb/acpi/i82371eb.asl b/src/southbridge/intel/i82371eb/acpi/i82371eb.asl index 4a1b385..f0f6a0c 100644 --- a/src/southbridge/intel/i82371eb/acpi/i82371eb.asl +++ b/src/southbridge/intel/i82371eb/acpi/i82371eb.asl @@ -34,7 +34,9 @@ /* Aliased DMA ports */ IO (Decode16, 0x0010, 0x0010, 0x01, 0x10, ) /* Aliased PIC ports */ - IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E, ) + /* Do not claim 0x2e-0x2f, per P3B-F vendor DSDT */ + IO (Decode16, 0x0022, 0x0022, 0x01, 0x0C, ) + IO (Decode16, 0x0030, 0x0030, 0x01, 0x10, ) /* Aliased timer ports */ IO (Decode16, 0x0050, 0x0050, 0x01, 0x04, ) IO (Decode16, 0x0062, 0x0062, 0x01, 0x02, ) -- To view, visit https://review.coreboot.org/c/coreboot/+/41458 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I11972b650d95a48e4d372defe201cc9e743d5b30 Gerrit-Change-Number: 41458 Gerrit-PatchSet: 1 Gerrit-Owner: Keith Hui <buurin(a)gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

3 6

Change in coreboot[master]: mb/ocp/deltalake: Add SMM console log level override
by Johnny Lin (Code Review) 15 Feb '23

15 Feb '23

Johnny Lin has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/47006 ) Change subject: mb/ocp/deltalake: Add SMM console log level override ...................................................................... mb/ocp/deltalake: Add SMM console log level override The log level is set to a configuration value, since SMI should not take too much time searching flash VPD. Change-Id: I73afc944fbd6c21e884397f3049bd363e2c1ce2c Signed-off-by: Johnny Lin <johnny_lin(a)wiwynn.com> --- M src/mainboard/ocp/deltalake/Kconfig M src/mainboard/ocp/deltalake/Makefile.inc M src/mainboard/ocp/deltalake/loglevel_vpd.c 3 files changed, 11 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/47006/1 diff --git a/src/mainboard/ocp/deltalake/Kconfig b/src/mainboard/ocp/deltalake/Kconfig index bb907f1..1d00c29 100644 --- a/src/mainboard/ocp/deltalake/Kconfig +++ b/src/mainboard/ocp/deltalake/Kconfig @@ -57,4 +57,9 @@ bool default y +config SMM_CONSOLE_LOGLEVEL + int + depends on DEBUG_SMI + default 7 + endif # BOARD_OCP_DELTALAKE diff --git a/src/mainboard/ocp/deltalake/Makefile.inc b/src/mainboard/ocp/deltalake/Makefile.inc index e961a34..9718f4c 100644 --- a/src/mainboard/ocp/deltalake/Makefile.inc +++ b/src/mainboard/ocp/deltalake/Makefile.inc @@ -8,5 +8,9 @@ ramstage-y += ramstage.c ipmi.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += fadt.c all-$(CONFIG_CONSOLE_OVERRIDE_LOGLEVEL) += loglevel_vpd.c +ifeq ($(CONFIG_DEBUG_SMI),y) +smm-$(CONFIG_CONSOLE_OVERRIDE_LOGLEVEL) += loglevel_vpd.c +endif + CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include CPPFLAGS_common += -I$(CONFIG_FSP_HEADER_PATH) diff --git a/src/mainboard/ocp/deltalake/loglevel_vpd.c b/src/mainboard/ocp/deltalake/loglevel_vpd.c index 3faf37a..21f3652 100644 --- a/src/mainboard/ocp/deltalake/loglevel_vpd.c +++ b/src/mainboard/ocp/deltalake/loglevel_vpd.c @@ -11,6 +11,8 @@ int log_level = COREBOOT_LOG_LEVEL_DEFAULT; char val_str[VPD_LEN]; + if (ENV_SMM) + return CONFIG_SMM_CONSOLE_LOGLEVEL; if (vpd_gets(COREBOOT_LOG_LEVEL, val_str, VPD_LEN, VPD_RW_THEN_RO)) { log_level = (int)atol(val_str); if (log_level < 0 || log_level >= BIOS_NEVER) -- To view, visit https://review.coreboot.org/c/coreboot/+/47006 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I73afc944fbd6c21e884397f3049bd363e2c1ce2c Gerrit-Change-Number: 47006 Gerrit-PatchSet: 1 Gerrit-Owner: Johnny Lin <Johnny_Lin(a)wiwynn.com> Gerrit-MessageType: newchange

9 46

Change in ...coreboot[master]: autoport: Add support for Haswell-LynxPoint platform
by Iru Cai (vimacs) (Code Review) 11 Feb '23

11 Feb '23

Hello Iru Cai, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/30890 to review the following change. Change subject: autoport: Add support for Haswell-LynxPoint platform ...................................................................... autoport: Add support for Haswell-LynxPoint platform It can now generate a buildable source for Clevo W650SZ. TODO: - Support Lynx Point LP (GPIO registers differ from non-LP) - Use PCH HD-Audio in azilia instead of the CPU/Northbridge HD-Audio Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Signed-off-by: Iru Cai <mytbk920423(a)gmail.com> --- M util/autoport/azalia.go A util/autoport/haswell.go A util/autoport/lynxpoint.go M util/autoport/main.go 4 files changed, 625 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/30890/1 diff --git a/util/autoport/azalia.go b/util/autoport/azalia.go index c525189..3090dd0 100644 --- a/util/autoport/azalia.go +++ b/util/autoport/azalia.go @@ -62,4 +62,9 @@ RegisterPCI(0x8086, 0x1c20, azalia{}) /* C216/ivybridge */ RegisterPCI(0x8086, 0x1e20, azalia{}) + /* Haswell */ + RegisterPCI(0x8086, 0x0c0c, azalia{}) + /* Lynx Point */ + RegisterPCI(0x8086, 0x8c20, azalia{}) + RegisterPCI(0x8086, 0x9c20, azalia{}) } diff --git a/util/autoport/haswell.go b/util/autoport/haswell.go new file mode 100644 index 0000000..d3c9d9f --- /dev/null +++ b/util/autoport/haswell.go @@ -0,0 +1,119 @@ +package main + +type haswellmc struct { + variant string +} + +func (i haswellmc) Scan(ctx Context, addr PCIDevData) { + inteltool := ctx.InfoSource.GetInteltool() + + /* FIXME:XX Move this somewhere else. */ + MainboardIncludes = append(MainboardIncludes, "drivers/intel/gma/int15.h") + MainboardEnable += (` /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +`) + + DevTree = DevTreeNode{ + Chip: "northbridge/intel/haswell", + MissingParent: "northbridge", + Comment: "FIXME: check gfx.ndid and gfx.did", + Registers: map[string]string{ + "gpu_dp_b_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 2) & 7), + "gpu_dp_c_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 10) & 7), + "gpu_dp_d_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 18) & 7), + "gpu_panel_port_select": FormatInt32((inteltool.IGD[0xc7208] >> 30) & 3), + "gpu_panel_power_up_delay": FormatInt32((inteltool.IGD[0xc7208] >> 16) & 0x1fff), + "gpu_panel_power_backlight_on_delay": FormatInt32(inteltool.IGD[0xc7208] & 0x1fff), + "gpu_panel_power_down_delay": FormatInt32((inteltool.IGD[0xc720c] >> 16) & 0x1fff), + "gpu_panel_power_backlight_off_delay": FormatInt32(inteltool.IGD[0xc720c] & 0x1fff), + "gpu_panel_power_cycle_delay": FormatInt32(inteltool.IGD[0xc7210] & 0xff), + "gpu_cpu_backlight": FormatHex32(inteltool.IGD[0x48254]), + "gpu_pch_backlight": FormatHex32((inteltool.IGD[0xc8254] >> 16) * 0x10001), + "gpu_ddi_e_connected": FormatBool(((inteltool.IGD[0x64000] >> 4) & 1) == 0), + /* FIXME:XX hardcoded. */ + "gfx.ndid": "3", + "gfx.did": "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }", + }, + Children: []DevTreeNode{ + { + Chip: "cpu_cluster", + Dev: 0, + Children: []DevTreeNode{ + { + Chip: "cpu/intel/haswell", + Children: []DevTreeNode{ + { + Chip: "lapic", + Dev: 0, + }, + { + Chip: "lapic", + Dev: 0xacac, + Disabled: true, + }, + }, + Registers: map[string]string{ + /* FIXME:XX hardcoded. */ + "c1_acpower": "1", + "c2_acpower": "3", + "c3_acpower": "5", + "c1_battery": "1", + "c2_battery": "3", + "c3_battery": "5", + }, + }, + }, + }, + + { + Chip: "domain", + Dev: 0, + PCIController: true, + ChildPCIBus: 0, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x0, Func: 0}, writeEmpty: true, additionalComment: "Host bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1, Func: 0}, writeEmpty: true, additionalComment: "PCIe Bridge for discrete graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x2, Func: 0}, writeEmpty: true, additionalComment: "Internal graphics"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x3, Func: 0}, writeEmpty: true, additionalComment: "Mini-HD audio"}, + }, + }, + }, + } + + PutPCIDev(addr, "Host bridge") + + /* FIXME:XX some configs are unsupported. */ + + KconfigBool["CPU_INTEL_HASWELL"] = true + KconfigBool["NORTHBRIDGE_INTEL_HASWELL"] = true + KconfigBool["INTEL_INT15"] = true + KconfigBool["HAVE_ACPI_TABLES"] = true + KconfigBool["HAVE_ACPI_RESUME"] = true + + KconfigInt["MAX_CPUS"] = 8 + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "cpu/intel/common/acpi/cpu.asl", + }) + + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "northbridge/intel/haswell/acpi/haswell.asl", + }, DSDTInclude{ + File: "drivers/intel/gma/acpi/default_brightness_levels.asl", + }) +} + +func init() { + RegisterPCI(0x8086, 0x0c00, haswellmc{variant: "Desktop"}) + RegisterPCI(0x8086, 0x0c04, haswellmc{variant: "Mobile"}) + RegisterPCI(0x8086, 0x0a04, haswellmc{variant: "ULT"}) + RegisterPCI(0x8086, 0x0c08, haswellmc{variant: "Server"}) + for _, id := range []uint16{ + 0x0402, 0x0412, 0x0422, + 0x0406, 0x0416, 0x0426, + 0x0d16, 0x0d26, 0x0d36, + 0x0a06, 0x0a16, 0x0a26, + } { + RegisterPCI(0x8086, id, GenericVGA{GenericPCI{Comment: "VGA controller"}}) + } +} diff --git a/util/autoport/lynxpoint.go b/util/autoport/lynxpoint.go new file mode 100644 index 0000000..df20c3f --- /dev/null +++ b/util/autoport/lynxpoint.go @@ -0,0 +1,495 @@ +package main + +import ( + "fmt" + "os" +) + +type lynxpoint struct { + variant string + node *DevTreeNode +} + +func (b lynxpoint) writeGPIOSet(ctx Context, sb *os.File, + val uint32, set uint, partno int, constraint uint32) { + + max := uint(32) + if set == 3 { + max = 12 + } + + bits := [6][2]string{ + {"GPIO_MODE_NATIVE", "GPIO_MODE_GPIO"}, + {"GPIO_DIR_OUTPUT", "GPIO_DIR_INPUT"}, + {"GPIO_LEVEL_LOW", "GPIO_LEVEL_HIGH"}, + {"GPIO_RESET_PWROK", "GPIO_RESET_RSMRST"}, + {"GPIO_NO_INVERT", "GPIO_INVERT"}, + {"GPIO_NO_BLINK", "GPIO_BLINK"}, + } + + for i := uint(0); i < max; i++ { + if ((constraint>>i)&1 == 1) { + fmt.Fprintf(sb, " .gpio%d = %s,\n", + (set-1)*32+i, + bits[partno][(val>>i)&1]) + } + } +} + +func (b lynxpoint) GPIO(ctx Context, inteltool InteltoolData) { + var constraint uint32 + gpio := Create(ctx, "gpio.c") + defer gpio.Close() + + AddROMStageFile("gpio.c", "") + + Add_gpl(gpio) + gpio.WriteString("#include <southbridge/intel/common/gpio.h>\n\n") + + /* TODO: different in LP PCH */ + addresses := [3][6]int{ + {0x00, 0x04, 0x0c, 0x60, 0x2c, 0x18}, + {0x30, 0x34, 0x38, 0x64, -1, -1}, + {0x40, 0x44, 0x48, 0x68, -1, -1}, + } + + for set := 1; set <= 3; set++ { + for partno, part := range []string{"mode", "direction", "level", "reset", "invert", "blink"} { + addr := addresses[set-1][partno] + if addr < 0 { + continue + } + fmt.Fprintf(gpio, "static const struct pch_gpio_set%d pch_gpio_set%d_%s = {\n", + set, set, part) + + constraint = 0xffffffff + switch part { + case "direction": + /* Ignored on native mode */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + case "level": + /* Level doesn't matter for input */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + case "reset": + /* Only show reset */ + constraint = inteltool.GPIO[uint16(addresses[set-1][3])] + case "invert": + /* Only on input and only show inverted GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][4])] + case "blink": + /* Only on output and only show blinking GPIO */ + constraint = inteltool.GPIO[uint16(addresses[set-1][0])] + constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])] + constraint &= inteltool.GPIO[uint16(addresses[set-1][5])] + } + b.writeGPIOSet(ctx, gpio, inteltool.GPIO[uint16(addr)], uint(set), partno, constraint) + gpio.WriteString("};\n\n") + } + } + + gpio.WriteString(`const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; +`) +} + +func (b lynxpoint) IsPCIeHotplug(ctx Context, port int) bool { + portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}] + if !ok { + return false + } + return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0 +} + +func (b lynxpoint) GetGPIOHeader() string { + return "southbridge/intel/lynxpoint/pch.h" +} + +func (b lynxpoint) EnableGPE(in int) { + b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2" +} + +func (b lynxpoint) EncodeGPE(in int) int { + return in + 0x10 +} + +func (b lynxpoint) DecodeGPE(in int) int { + return in - 0x10 +} + +func (b lynxpoint) NeedRouteGPIOManually() { + b.node.Comment += ", FIXME: set gpiX_routing for EC support" +} + +func (b lynxpoint) Scan(ctx Context, addr PCIDevData) { + + SouthBridge = &b + + inteltool := ctx.InfoSource.GetInteltool() + b.GPIO(ctx, inteltool) + + KconfigBool["SOUTHBRIDGE_INTEL_LYNXPOINT"] = true + if b.variant == "Lynx Point LP" { + KconfigBool["INTEL_LYNXPOINT_LP"] = true + } + KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true + KconfigInt["USBDEBUG_HCD_INDEX"] = 2 + KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this" + dmi := ctx.InfoSource.GetDMI() + if dmi.Vendor == "LENOVO" { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 10 + } else { + KconfigInt["DRAM_RESET_GATE_GPIO"] = 60 + } + KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this" + + /* Not strictly speaking correct. These subsys/subvendor referer to PCI devices. + But most systems don't have any of those. But the config needs to be set + nevertheless. So set it to southbridge subsys/subvendor. */ + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID"] = uint32(GetLE16(addr.ConfigDump[0x2c:0x2e])) + KconfigHex["MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID"] = uint32(GetLE16(addr.ConfigDump[0x2e:0x30])) + + ich9GetFlashSize(ctx) + + DSDTDefines = append(DSDTDefines, + DSDTDefine{ + Key: "BRIGHTNESS_UP", + Value: "\\_SB.PCI0.GFX0.INCB", + }, + DSDTDefine{ + Key: "BRIGHTNESS_DOWN", + Value: "\\_SB.PCI0.GFX0.DECB", + }, + DSDTDefine{ + Key: "ACPI_VIDEO_DEVICE", + Value: "\\_SB.PCI0.GFX0", + }) + + /* SPI init */ + MainboardIncludes = append(MainboardIncludes, "southbridge/intel/lynxpoint/pch.h") + + cur := DevTreeNode{ + Chip: "southbridge/intel/lynxpoint", + Comment: "Intel Series 8 Lynx Point PCH", + + Registers: map[string]string{ + "pirqa_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x60]), + "pirqb_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x61]), + "pirqc_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x62]), + "pirqd_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x63]), + "pirqe_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x68]), + "pirqf_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x69]), + "pirqg_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6a]), + "pirqh_routing": FormatHex8(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x6b]), + "sata_ahci": "1", + "gen1_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]), + "gen2_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]), + "gen3_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]), + "gen4_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]), + "sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f), + }, + PCISlots: []PCISlot{ + PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, additionalComment: "USB 3.0 Controller"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, additionalComment: "Management Engine Interface 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, additionalComment: "Management Engine Interface 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, additionalComment: "Management Engine IDE-R"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, additionalComment: "Management Engine KT"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, additionalComment: "Intel Gigabit Ethernet"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, additionalComment: "High Definition Audio"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, additionalComment: "PCIe Port #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, additionalComment: "PCIe Port #2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, additionalComment: "PCIe Port #3"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, additionalComment: "PCIe Port #4"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, additionalComment: "PCIe Port #5"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, additionalComment: "PCIe Port #6"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, additionalComment: "PCIe Port #7"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, additionalComment: "PCIe Port #8"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, additionalComment: "PCI bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, additionalComment: "LPC bridge"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, additionalComment: "SATA Controller 1"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, additionalComment: "SMBus"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, additionalComment: "SATA Controller 2"}, + PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, additionalComment: "Thermal"}, + }, + } + + b.node = &cur + + PutPCIChip(addr, cur) + PutPCIDevParent(addr, "PCI-LPC bridge", "lpc") + + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/platform.asl", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/globalnvs.asl", + Comment: "global NVS and variables", + }) + DSDTIncludes = append(DSDTIncludes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/sleepstates.asl", + }) + DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{ + File: "southbridge/intel/lynxpoint/acpi/pch.asl", + }) + + sb := Create(ctx, "romstage.c") + defer sb.Close() + Add_gpl(sb) + sb.WriteString(`#include <stdint.h> +#include <cpu/intel/romstage.h> +#include <cpu/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/pei_data.h> +#include <southbridge/intel/common/gpio.h> +#include <southbridge/intel/lynxpoint/pch.h> + +static const struct rcba_config_instruction rcba_config[] = { +`) + RestoreDIRRoute(sb, "D31IR", uint16(inteltool.RCBA[0x3140])) + RestoreDIRRoute(sb, "D29IR", uint16(inteltool.RCBA[0x3144])) + RestoreDIRRoute(sb, "D28IR", uint16(inteltool.RCBA[0x3146])) + RestoreDIRRoute(sb, "D27IR", uint16(inteltool.RCBA[0x3148])) + RestoreDIRRoute(sb, "D26IR", uint16(inteltool.RCBA[0x314c])) + RestoreDIRRoute(sb, "D25IR", uint16(inteltool.RCBA[0x3150])) + RestoreDIRRoute(sb, "D22IR", uint16(inteltool.RCBA[0x315c])) + RestoreDIRRoute(sb, "D20IR", uint16(inteltool.RCBA[0x3160])) + + sb.WriteString(` + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +};`) + + sb.WriteString(` + +void mainboard_config_superio(void) +{ +} + +void mainboard_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 1, /* desktop/server, FIXME: check this */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, /* FIXME: check this */ + .ec_present = 0, + .dimm_channel0_disabled = 0, /* FIXME: leave channel 0 enabled */ + .dimm_channel1_disabled = 0, /* FIXME: leave channel 1 enabled */ + .max_ddr3_freq = 1600, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ +`) + + pdo1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x64] + ocmap1 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1d, Func: 0}].ConfigDump[0x74:0x78] + pdo2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x64] + ocmap2 := PCIMap[PCIAddr{Bus: 0, Dev: 0x1a, Func: 0}].ConfigDump[0x74:0x78] + + for port := uint(0); port < 14; port++ { + var port_oc int = -1 + var port_pos string + var port_disable uint8 + + if port < 8 { + port_disable = (pdo1 >> port) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap1[oc] & (1 << port)) != 0) { + port_oc = oc + break + } + } + } else { + port_disable = (pdo2 >> (port - 8)) & 1 + for oc := 0; oc < 4; oc++ { + if ((ocmap2[oc] & (1 << (port - 8))) != 0) { + port_oc = oc + 4 + break + } + } + } + if port_disable == 1 { + port_pos = "USB_PORT_SKIP" + } else { + port_pos = "USB_PORT_BACK_PANEL" + } + if port_oc == -1 { + fmt.Fprintf(sb, " { 0x0040, %d, USB_OC_PIN_SKIP, %s },\n", + (port_disable ^ 1), port_pos) + } else { + fmt.Fprintf(sb, " { 0x0040, %d, %d, %s },\n", + (port_disable ^ 1), port_oc, port_pos) + } + } + + sb.WriteString(` }, + .usb3_ports = { +`) + + xpdo := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xe8] + u3ocm := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}].ConfigDump[0xc8:0xd0] + + for port := uint(0); port < 6; port++ { + var port_oc int = -1 + port_disable := (xpdo >> port) & 1 + for oc := 0; oc < 8; oc++ { + if (u3ocm[oc] & (1 << port)) != 0 { + port_oc = oc + break + } + } + if port_oc == -1 { + fmt.Fprintf(sb, " { %d, USB_OC_PIN_SKIP },\n", + (port_disable ^ 1)) + } else { + fmt.Fprintf(sb, " { %d, %d },\n", + (port_disable ^ 1), port_oc) + } + } + + sb.WriteString(` }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + }; + + romstage_common(&romstage_params); +}`) + + gnvs := Create(ctx, "acpi_tables.c") + defer gnvs.Close() + + Add_gpl(gnvs) + gnvs.WriteString(`#include <southbridge/intel/lynxpoint/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} +`) + +} + +func init() { + for _, id := range []uint16 { + 0x8c41, 0x8c49, 0x8c4b, 0x8c4f, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Mobile"}) + } + + for _, id := range []uint16 { + 0x8c42, 0x8c44, 0x8c46, 0x8c4a, + 0x8c4c, 0x8c4e, 0x8c50, 0x8c5c, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Desktop"}) + } + + for _, id := range []uint16 { + 0x8c52, 0x8c54, 0x8c56, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point Server"}) + } + + for _, id := range []uint16 { + 0x9c41, 0x9c43, 0x9c45, + } { + RegisterPCI(0x8086, uint16(id), lynxpoint{variant: "Lynx Point LP"}) + } + + /* PCIe bridge */ + for _, id := range []uint16{ + 0x8c10, 0x8c12, 0x8c14, 0x8c16, 0x8c18, 0x8c1a, 0x8c1c, 0x8c1e, + 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* SMBus controller */ + RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x8c22, GenericPCI{MissingParent: "smbus"}) + RegisterPCI(0x8086, 0x9c22, GenericPCI{MissingParent: "smbus"}) + + /* SATA */ + for _, id := range []uint16{ + 0x8c00, 0x8c02, 0x8c04, 0x8c06, 0x8c08, 0x8c0e, + 0x8c01, 0x8c03, 0x8c05, 0x8c07, 0x8c09, 0x8c0f, + 0x9c03, 0x9c05, 0x9c07, 0x9c0f, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* EHCI */ + for _, id := range []uint16{ + 0x9c26, 0x8c26, 0x8c2d, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* XHCI */ + RegisterPCI(0x8086, 0x8c31, GenericPCI{}) + RegisterPCI(0x8086, 0x9c31, GenericPCI{}) + + /* ME and children */ + for _, id := range []uint16{ + 0x8c3a, 0x8c3b, + } { + RegisterPCI(0x8086, id, GenericPCI{}) + } + + /* Ethernet */ + RegisterPCI(0x8086, 0x8c33, GenericPCI{}) +} diff --git a/util/autoport/main.go b/util/autoport/main.go index 05a829b..c1920a7 100644 --- a/util/autoport/main.go +++ b/util/autoport/main.go @@ -236,6 +236,12 @@ pcidev.ConfigDump[addr]) } +func RestoreDIRRoute(f *os.File, regname string, val uint16) { + fmt.Fprintf(f, " RCBA_SET_REG_16(%s, DIR_ROUTE(PIRQ%c, PIRQ%c, PIRQ%c, PIRQ%c)),\n", + regname, 'A' + (val & 7), 'A' + ((val >> 4) & 7), + 'A' + ((val >> 8) & 7), 'A' + ((val >> 12) & 7)) +} + func RestorePCI32Simple(f *os.File, pcidev PCIDevData, addr uint16) { fmt.Fprintf(f, " pci_write_config32(PCI_DEV(%d, 0x%02x, %d), 0x%02x, 0x%02x%02x%02x%02x);\n", pcidev.Bus, pcidev.Dev, pcidev.Func, addr, -- To view, visit https://review.coreboot.org/c/coreboot/+/30890 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a Gerrit-Change-Number: 30890 Gerrit-PatchSet: 1 Gerrit-Owner: Iru Cai (vimacs) <mytbk920423(a)gmail.com> Gerrit-Reviewer: Iru Cai <mytbk920423(a)gmail.com> Gerrit-MessageType: newchange

13 72

Change in ...coreboot[master]: Mistral: Enable USB in romstage
by Name of user not set (Code Review) 16 Jan '23

16 Jan '23

nsekar(a)codeaurora.org has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32063 Change subject: Mistral: Enable USB in romstage ...................................................................... Mistral: Enable USB in romstage Enable USB support for mistral in romstage. TEST=build & run Change-Id: I5c2bbe16aa3601e014a2b77d192565402ed23794 Signed-off-by: Nitheesh Sekar <nsekar(a)codeaurora.org> --- M src/mainboard/google/mistral/Makefile.inc M src/mainboard/google/mistral/mainboard.c A src/mainboard/google/mistral/romstage.c 3 files changed, 48 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/32063/1 diff --git a/src/mainboard/google/mistral/Makefile.inc b/src/mainboard/google/mistral/Makefile.inc index dfb0bbc..2cb9631 100644 --- a/src/mainboard/google/mistral/Makefile.inc +++ b/src/mainboard/google/mistral/Makefile.inc @@ -11,6 +11,7 @@ romstage-y += memlayout.ld romstage-y += chromeos.c romstage-y += reset.c +romstage-y += romstage.c ramstage-y += memlayout.ld ramstage-y += chromeos.c diff --git a/src/mainboard/google/mistral/mainboard.c b/src/mainboard/google/mistral/mainboard.c index b45657f..1d62adb 100644 --- a/src/mainboard/google/mistral/mainboard.c +++ b/src/mainboard/google/mistral/mainboard.c @@ -17,6 +17,20 @@ #include <bootblock_common.h> #include <timestamp.h> #include <vendorcode/google/chromeos/chromeos.h> +#include <soc/usb.h> + +static struct usb_board_data usb1_board_data = { + .parameter_override_x0 = 0x63, + .parameter_override_x1 = 0x03, + .parameter_override_x0 = 0x1d, + .parameter_override_x1 = 0x03, +}; + +static void setup_usb(void) +{ + /* Setting Secondary usb controller */ + setup_usb_host(HSUSB_HS_PORT_1, &usb1_board_data); +} static void mainboard_init(struct device *dev) { @@ -24,6 +38,8 @@ /* Copy WIFI calibration data into CBMEM. */ cbmem_add_vpd_calibration_data(); } + + setup_usb(); } static void mainboard_enable(struct device *dev) diff --git a/src/mainboard/google/mistral/romstage.c b/src/mainboard/google/mistral/romstage.c new file mode 100644 index 0000000..41ee4ed --- /dev/null +++ b/src/mainboard/google/mistral/romstage.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/stages.h> +#include <soc/usb.h> + +static void prepare_usb(void) +{ + /* + * Do DWC3 core and phy reset. Kick these resets off early + * so they get atleast 1msec to settle. + */ + reset_usb(HSUSB_HS_PORT_1); +} + +void platform_romstage_main(void) +{ + prepare_usb(); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/32063 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5c2bbe16aa3601e014a2b77d192565402ed23794 Gerrit-Change-Number: 32063 Gerrit-PatchSet: 1 Gerrit-Owner: nsekar(a)codeaurora.org Gerrit-MessageType: newchange

3 4

Change in ...coreboot[master]: mb/apple: Add MacBook Pro 10,1 (A1398) support
by Evgeny Zinoviev (Code Review) 14 Jan '23

14 Jan '23

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32673 Change subject: mb/apple: Add MacBook Pro 10,1 (A1398) support ...................................................................... mb/apple: Add MacBook Pro 10,1 (A1398) support MacBook Pro Retina 15 (Mid 2012) with Ivy Bridge CPU. This is WIP. Not for merging. Change-Id: Ica03aba442493c0d369a3d360ad569ddc16954df Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- M 3rdparty/vboot A src/mainboard/apple/macbookpro10_1/Kconfig A src/mainboard/apple/macbookpro10_1/Kconfig.name A src/mainboard/apple/macbookpro10_1/Makefile.inc A src/mainboard/apple/macbookpro10_1/acpi/ec.asl A src/mainboard/apple/macbookpro10_1/acpi/platform.asl A src/mainboard/apple/macbookpro10_1/acpi/superio.asl A src/mainboard/apple/macbookpro10_1/acpi_tables.c A src/mainboard/apple/macbookpro10_1/board_info.txt A src/mainboard/apple/macbookpro10_1/devicetree.cb A src/mainboard/apple/macbookpro10_1/dsdt.asl A src/mainboard/apple/macbookpro10_1/gma-mainboard.ads A src/mainboard/apple/macbookpro10_1/gpio.c A src/mainboard/apple/macbookpro10_1/hda_verb.c A src/mainboard/apple/macbookpro10_1/mainboard.c A src/mainboard/apple/macbookpro10_1/romstage.c 16 files changed, 758 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/32673/1 diff --git a/3rdparty/vboot b/3rdparty/vboot index e7edff6..304aa42 160000 --- a/3rdparty/vboot +++ b/3rdparty/vboot @@ -1 +1 @@ -Subproject commit e7edff6653e16ed915c3ad12234d133d1ef4dcc9 +Subproject commit 304aa429c1a04cda3ab2ce37b9e31af84405bfca diff --git a/src/mainboard/apple/macbookpro10_1/Kconfig b/src/mainboard/apple/macbookpro10_1/Kconfig new file mode 100644 index 0000000..603f3ee --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/Kconfig @@ -0,0 +1,46 @@ +if BOARD_APPLE_MACBOOKPRO10_1 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + select MAINBOARD_HAS_LIBGFXINIT + select GFX_GMA_INTERNAL_IS_EDP + select SERIRQ_CONTINUOUS_MODE + +config MAINBOARD_DIR + string + default apple/macbookpro10_1 + +config MAINBOARD_PART_NUMBER + string + default "MacBookPro10,1" + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config VGA_BIOS_ID + string + default "8086,0166" + +config DRAM_RESET_GATE_GPIO + int + default 28 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX # FIXME: check this + int + default 2 +endif diff --git a/src/mainboard/apple/macbookpro10_1/Kconfig.name b/src/mainboard/apple/macbookpro10_1/Kconfig.name new file mode 100644 index 0000000..c257f7a --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_APPLE_MACBOOKPRO10_1 + bool "MacBookPro10,1" diff --git a/src/mainboard/apple/macbookpro10_1/Makefile.inc b/src/mainboard/apple/macbookpro10_1/Makefile.inc new file mode 100644 index 0000000..fd60338 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/Makefile.inc @@ -0,0 +1,7 @@ +romstage-y += gpio.c + +cbfs-files-y += spd.bin +spd.bin-file := spd.bin +spd.bin-type := spd + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/apple/macbookpro10_1/acpi/ec.asl b/src/mainboard/apple/macbookpro10_1/acpi/ec.asl new file mode 100644 index 0000000..f70cb3d --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi/ec.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) +/* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookpro10_1/acpi/platform.asl b/src/mainboard/apple/macbookpro10_1/acpi/platform.asl new file mode 100644 index 0000000..a17c6ea --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi/platform.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookpro10_1/acpi/superio.asl b/src/mainboard/apple/macbookpro10_1/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi/superio.asl diff --git a/src/mainboard/apple/macbookpro10_1/acpi_tables.c b/src/mainboard/apple/macbookpro10_1/acpi_tables.c new file mode 100644 index 0000000..c48f0bd --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/acpi_tables.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookpro10_1/board_info.txt b/src/mainboard/apple/macbookpro10_1/board_info.txt new file mode 100644 index 0000000..81a5134 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/board_info.txt @@ -0,0 +1,6 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +ROM package: SOIC-8 +ROM socketed: n +Release year: 2012 diff --git a/src/mainboard/apple/macbookpro10_1/devicetree.cb b/src/mainboard/apple/macbookpro10_1/devicetree.cb new file mode 100644 index 0000000..f9e7eb4 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/devicetree.cb @@ -0,0 +1,124 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + #register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.did" = "{ 0x80000410, 0x80000320, 0x80000410, 0x80000410, 0x00000005 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0xffffffff" + register "gpu_dp_b_hotplug" = "7" + register "gpu_dp_c_hotplug" = "7" + register "gpu_dp_d_hotplug" = "7" + register "gpu_panel_port_select" = "3" + register "gpu_panel_power_backlight_off_delay" = "8191" + register "gpu_panel_power_backlight_on_delay" = "8191" + register "gpu_panel_power_cycle_delay" = "255" + register "gpu_panel_power_down_delay" = "8191" + register "gpu_panel_power_up_delay" = "8191" + register "gpu_pch_backlight" = "0xffffffff" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on + end + device lapic 0xacac off + end + end + end + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x001c0301" + register "gen4_dec" = "0x00fc0701" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x1" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x08040201" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x8086 0x7270 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x8086 0x7270 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x8086 0x7270 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x8086 0x7270 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x8086 0x7270 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x8086 0x7270 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x8086 0x7270 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBus + subsystemid 0x8086 0x7270 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x106b 0x00f7 + end + device pci 01.0 on # PCIe Bridge for discrete graphics + subsystemid 0x106b 0x00f7 + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x106b 0x00f7 + end + device pci 01.2 on + subsystemid 0x106b 0x00f7 + end + device pci 01.1 on + subsystemid 0x106b 0x00f7 + end + end +end diff --git a/src/mainboard/apple/macbookpro10_1/dsdt.asl b/src/mainboard/apple/macbookpro10_1/dsdt.asl new file mode 100644 index 0000000..455ac17 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/dsdt.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/apple/macbookpro10_1/gma-mainboard.ads b/src/mainboard/apple/macbookpro10_1/gma-mainboard.ads new file mode 100644 index 0000000..d4a5d7d --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/gma-mainboard.ads @@ -0,0 +1,34 @@ +-- +-- This file is part of the coreboot project. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + Internal, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/apple/macbookpro10_1/gpio.c b/src/mainboard/apple/macbookpro10_1/gpio.c new file mode 100644 index 0000000..a445687 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/gpio.c @@ -0,0 +1,243 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio11 = GPIO_RESET_RSMRST, + .gpio15 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_INVERT, + .gpio4 = GPIO_INVERT, + .gpio5 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_GPIO, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/apple/macbookpro10_1/hda_verb.c b/src/mainboard/apple/macbookpro10_1/hda_verb.c new file mode 100644 index 0000000..b8e4855 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/hda_verb.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10134206, /* Codec Vendor / Device ID: Cirrus */ + 0x106b2800, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106b2800), + + /* NID 0x09. */ + AZALIA_PIN_CFG(0x0, 0x09, 0x002b4020), + + /* NID 0x0a. */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x90100112), + + /* NID 0x0b. */ + AZALIA_PIN_CFG(0x0, 0x0b, 0x90100110), + + /* NID 0x0c. */ + AZALIA_PIN_CFG(0x0, 0x0c, 0x400000f0), + + /* NID 0x0d. */ + AZALIA_PIN_CFG(0x0, 0x0d, 0x400000f0), + + /* NID 0x0e. */ + AZALIA_PIN_CFG(0x0, 0x0e, 0x90a60100), + + /* NID 0x0f. */ + AZALIA_PIN_CFG(0x0, 0x0f, 0x400000f0), + + /* NID 0x10. */ + AZALIA_PIN_CFG(0x0, 0x10, 0x004be030), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x400000f0), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbookpro10_1/mainboard.c b/src/mainboard/apple/macbookpro10_1/mainboard.c new file mode 100644 index 0000000..3910541 --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/mainboard.c @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> + +static void mainboard_init(struct device *dev) +{ + +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + + /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/apple/macbookpro10_1/romstage.c b/src/mainboard/apple/macbookpro10_1/romstage.c new file mode 100644 index 0000000..c35604b --- /dev/null +++ b/src/mainboard/apple/macbookpro10_1/romstage.c @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* FIXME: Check if all includes are needed. */ + +#include <stdint.h> +#include <string.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/mmio.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/common/gpio.h> +#include <cbfs.h> + +void pch_enable_lpc(void) +{ + pci_write_config16(PCH_LPC_DEV, 0x82, 0x3f0f); + pci_write_config32(PCH_LPC_DEV, 0x84, 0x000c0681); + pci_write_config32(PCH_LPC_DEV, 0x88, 0x000c1641); + pci_write_config32(PCH_LPC_DEV, 0x8c, 0x001c0301); + pci_write_config32(PCH_LPC_DEV, 0x90, 0x00fc0701); + pci_write_config16(PCH_LPC_DEV, 0x80, 0x0070); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 1 }, + { 1, 0, 2 }, + { 1, 0, 3 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +// FIXME +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + void *spd_file; + size_t spd_file_len = 0; + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (spd_file && spd_file_len >= 128) { + memcpy(&spd[0], spd_file, 128); + memcpy(&spd[2], spd_file, 128); + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/32673 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ica03aba442493c0d369a3d360ad569ddc16954df Gerrit-Change-Number: 32673 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

6 47

Change in ...coreboot[master]: drivers/apple: Add hybrid graphics driver
by Evgeny Zinoviev (Code Review) 14 Jan '23

14 Jan '23

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32719 Change subject: drivers/apple: Add hybrid graphics driver ...................................................................... drivers/apple: Add hybrid graphics driver Hybrid graphics driver for Apple MacBook Pro. Change-Id: I22b66622cd2da0e9951ee726d650d204fbb8a5bc Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- A src/drivers/apple/hybrid_graphics/Kconfig A src/drivers/apple/hybrid_graphics/Makefile.inc A src/drivers/apple/hybrid_graphics/chip.h A src/drivers/apple/hybrid_graphics/gmux.c A src/drivers/apple/hybrid_graphics/gmux.h A src/drivers/apple/hybrid_graphics/hybrid_graphics.c A src/drivers/apple/hybrid_graphics/hybrid_graphics.h A src/drivers/apple/hybrid_graphics/romstage.c 8 files changed, 417 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/19/32719/1 diff --git a/src/drivers/apple/hybrid_graphics/Kconfig b/src/drivers/apple/hybrid_graphics/Kconfig new file mode 100644 index 0000000..252373f --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/Kconfig @@ -0,0 +1,3 @@ +config DRIVERS_APPLE_HYBRID_GRAPHICS + bool + default n diff --git a/src/drivers/apple/hybrid_graphics/Makefile.inc b/src/drivers/apple/hybrid_graphics/Makefile.inc new file mode 100644 index 0000000..ea45b45 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/Makefile.inc @@ -0,0 +1,15 @@ +# +# This file is part of the coreboot project. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +romstage-$(CONFIG_DRIVERS_APPLE_HYBRID_GRAPHICS) += gmux.c romstage.c +ramstage-$(CONFIG_DRIVERS_APPLE_HYBRID_GRAPHICS) += gmux.c hybrid_graphics.c diff --git a/src/drivers/apple/hybrid_graphics/chip.h b/src/drivers/apple/hybrid_graphics/chip.h new file mode 100644 index 0000000..39434f8 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/chip.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _APPLE_HYBRID_GRAPHICS_CHIP_H_ +#define _APPLE_HYBRID_GRAPHICS_CHIP_H_ + +enum hybrid_graphics_req { + HYBRID_GRAPHICS_INTEGRATED = 0, + HYBRID_GRAPHICS_DISCRETE = 1 +}; + +#define HYBRID_GRAPHICS_DEFAULT_GPU HYBRID_GRAPHICS_INTEGRATED + +struct drivers_apple_hybrid_graphics_config { + unsigned int gmux_indexed; +}; + +#endif /* _APPLE_HYBRID_GRAPHICS_CHIP_H_ */ diff --git a/src/drivers/apple/hybrid_graphics/gmux.c b/src/drivers/apple/hybrid_graphics/gmux.c new file mode 100644 index 0000000..e1f763a --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/gmux.c @@ -0,0 +1,158 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) Canonical Ltd. <seth.forshee(a)canonical.com> + * Copyright (C) 2010-2012 Andreas Heider <andreas(a)meetr.de> + * Copyright (C) 2015 Lukas Wunner <lukas(a)wunner.de> + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <delay.h> +#include <arch/io.h> +#include <device/device.h> +#include "gmux.h" +#include "chip.h" + +static int gmux_index_wait_ready(void) +{ + int i = 200; + u8 gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + + while (i && (gwr & 0x01)) { + inb(GMUX_IOSTART + GMUX_PORT_READ); + gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + return !!i; +} + +static int gmux_index_wait_complete(void) +{ + int i = 200; + u8 gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + + while (i && !(gwr & 0x01)) { + gwr = inb(GMUX_IOSTART + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + if (gwr & 0x01) + inb(GMUX_IOSTART + GMUX_PORT_READ); + + return !!i; +} + +u8 gmux_pio_read8(int port) +{ + return inb(GMUX_IOSTART + port); +} + +u8 gmux_index_read8(int port) +{ + u8 val; + + gmux_index_wait_ready(); + outb((port & 0xff), GMUX_IOSTART + GMUX_PORT_READ); + gmux_index_wait_complete(); + val = inb(GMUX_IOSTART + GMUX_PORT_VALUE); + + return val; +} + +void gmux_pio_write8(int port, u8 val) +{ + outb(val, GMUX_IOSTART + port); +} + + +void gmux_index_write8(int port, u8 val) +{ + outb(val, GMUX_IOSTART + GMUX_PORT_VALUE); + gmux_index_wait_ready(); + outb(port & 0xff, GMUX_IOSTART + GMUX_PORT_WRITE); + gmux_index_wait_complete(); +} + +u32 gmux_pio_read32(int port) +{ + return inl(GMUX_IOSTART + port); +} + +u32 gmux_index_read32(int port) +{ + u32 val; + + gmux_index_wait_ready(); + outb((port & 0xff), GMUX_IOSTART + GMUX_PORT_READ); + gmux_index_wait_complete(); + val = inl(GMUX_IOSTART + GMUX_PORT_VALUE); + + return val; +} + +u8 gmux_read8(const struct device *dev, int port) +{ + const struct drivers_apple_hybrid_graphics_config *config = dev->chip_info; + if (config->gmux_indexed) { + return gmux_index_read8(port); + } else { + return gmux_pio_read8(port); + } +} + +void gmux_write8(const struct device *dev, int port, u8 val) +{ + const struct drivers_apple_hybrid_graphics_config *config = dev->chip_info; + if (config->gmux_indexed) { + gmux_index_write8(port, val); + } else { + gmux_pio_write8(port, val); + } +} + +u32 gmux_read32(const struct device *dev, int port) +{ + const struct drivers_apple_hybrid_graphics_config *config = dev->chip_info; + if (config->gmux_indexed) { + return gmux_index_read32(port); + } else { + return gmux_pio_read32(port); + } +} + +void gmux_dgpu_power_enable(const struct device *dev, bool enable) +{ + if (enable) { + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 3); + } else { + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(dev, GMUX_PORT_DISCRETE_POWER, 0); + } +} + +void gmux_switch(const struct device *dev, bool dgpu) +{ + if (dgpu) { + gmux_write8(dev, GMUX_PORT_SWITCH_DDC, 2); + gmux_write8(dev, GMUX_PORT_SWITCH_DISPLAY, 3); + } else { + gmux_write8(dev, GMUX_PORT_SWITCH_DDC, 1); + gmux_write8(dev, GMUX_PORT_SWITCH_DISPLAY, 2); + } +} + + diff --git a/src/drivers/apple/hybrid_graphics/gmux.h b/src/drivers/apple/hybrid_graphics/gmux.h new file mode 100644 index 0000000..18f6722 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/gmux.h @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) Canonical Ltd. <seth.forshee(a)canonical.com> + * Copyright (C) 2010-2012 Andreas Heider <andreas(a)meetr.de> + * Copyright (C) 2015 Lukas Wunner <lukas(a)wunner.de> + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef EC_APPLE_GMUX_H +#define EC_APPLE_GMUX_H + +#define GMUX_PORT_VERSION_MAJOR 0x04 +#define GMUX_PORT_VERSION_MINOR 0x05 +#define GMUX_PORT_VERSION_RELEASE 0x06 + +#define GMUX_PORT_SWITCH_DISPLAY 0x10 +#define GMUX_PORT_SWITCH_DDC 0x28 +#define GMUX_PORT_DISCRETE_POWER 0x50 +#define GMUX_PORT_MAX_BRIGHTNESS 0x70 +#define GMUX_PORT_BRIGHTNESS 0x74 +#define GMUX_PORT_VALUE 0xc2 +#define GMUX_PORT_READ 0xd0 +#define GMUX_PORT_WRITE 0xd4 + +#define GMUX_PORT_INTERRUPT_ENABLE 0x14 +#define GMUX_INTERRUPT_ENABLE 0xff +#define GMUX_INTERRUPT_DISABLE 0x00 + +#define GMUX_BRIGHTNESS_MASK 0x00ffffff +#define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK + +#define GMUX_IOSTART 0x700 + +u8 gmux_index_read8(int port); +u8 gmux_pio_read8(int port); +u8 gmux_read8(const struct device *dev, int port); + +void gmux_index_write8(int port, u8 val); +void gmux_pio_write8(int port, u8 val); +void gmux_write8(const struct device *dev, int port, u8 val); + +u32 gmux_index_read32(int port); +u32 gmux_pio_read32(int port); +u32 gmux_read32(const struct device *dev, int port); + +void gmux_switch(const struct device *dev, bool dgpu); +void gmux_dgpu_power_enable(const struct device *dev, bool enable); + +#endif /* EC_APPLE_GMUX_H */ diff --git a/src/drivers/apple/hybrid_graphics/hybrid_graphics.c b/src/drivers/apple/hybrid_graphics/hybrid_graphics.c new file mode 100644 index 0000000..804eb76 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/hybrid_graphics.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <option.h> +#include <device/device.h> + +#include <southbridge/intel/common/gpio.h> +#include <console/console.h> +#include "chip.h" +#include "gmux.h" + +static void enable_dev(struct device *dev) +{ + printk(BIOS_INFO, "Hybrid graphics enable_dev\n"); + + const struct drivers_lenovo_hybrid_graphics_config *config; + enum hybrid_graphics_req mode; + u8 ver_major, ver_minor, ver_release; + u32 version, max_brightness, brightness; + + /* Don't confuse anyone else and disable the fake device */ + dev->enabled = 0; + + config = dev->chip_info; + if (!config) { + printk(BIOS_INFO, "Hybrid graphics: Not installed\n"); + return; + } + + version = gmux_index_read32(GMUX_PORT_VERSION_MAJOR); + ver_major = (version >> 24) & 0xff; + ver_minor = (version >> 16) & 0xff; + ver_release = (version >> 8) & 0xff; + max_brightness = gmux_index_read32(GMUX_PORT_MAX_BRIGHTNESS); + brightness = gmux_index_read32(GMUX_PORT_BRIGHTNESS) & GMUX_BRIGHTNESS_MASK; + + printk(BIOS_INFO, "gmux version: %d.%d.%d\n", + ver_major, ver_minor, ver_release); + printk(BIOS_INFO, "gmux max brightness: %d\n", max_brightness); + printk(BIOS_INFO, "gmux brightness: %d\n", brightness); + + mode = HYBRID_GRAPHICS_DEFAULT_GPU; + get_option(&mode, "hybrid_graphics_mode"); + + gmux_switch(dev, mode == HYBRID_GRAPHICS_DISCRETE); +} + +struct chip_operations drivers_apple_hybrid_graphics_ops = { + CHIP_NAME("Apple hybrid graphics driver") + .enable_dev = enable_dev +}; diff --git a/src/drivers/apple/hybrid_graphics/hybrid_graphics.h b/src/drivers/apple/hybrid_graphics/hybrid_graphics.h new file mode 100644 index 0000000..782be44 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/hybrid_graphics.h @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DRIVERS_APPLE_HYBRID_GRAPHICS_H_ +#define _DRIVERS_APPLE_HYBRID_GRAPHICS_H_ + +#define HYBRID_GRAPHICS_PORT 0xff +#define HYBRID_GRAPHICS_DEVICE 0xf + +void early_hybrid_graphics(bool *enable_igd, bool *enable_peg); + +#endif /* _DRIVERS_APPLE_HYBRID_GRAPHICS_CHIP_H_ */ diff --git a/src/drivers/apple/hybrid_graphics/romstage.c b/src/drivers/apple/hybrid_graphics/romstage.c new file mode 100644 index 0000000..9cd5098 --- /dev/null +++ b/src/drivers/apple/hybrid_graphics/romstage.c @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Patrick Rudolph <siro(a)das-labor.org> + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <types.h> +#include <option.h> +#include <device/device.h> +#include <console/console.h> +#include "hybrid_graphics.h" +#include "chip.h" +#include "gmux.h" + +void early_hybrid_graphics(bool *enable_igd, bool *enable_peg) +{ + const struct drivers_apple_hybrid_graphics_config *config; + const struct device *dev; + + enum hybrid_graphics_req mode = HYBRID_GRAPHICS_DEFAULT_GPU; + + printk(BIOS_INFO, "Hybrid graphics early_hybrid_graphics\n"); + + /* TODO: Use generic device instead of dummy PNP device */ + dev = dev_find_slot_pnp(HYBRID_GRAPHICS_PORT, HYBRID_GRAPHICS_DEVICE); + + if (!dev || !dev->chip_info) { + printk(BIOS_ERR, "Hybrid graphics: ERROR\n"); + *enable_igd = true; + *enable_peg = false; + return; + } + + config = dev->chip_info; + + get_option(&mode, "hybrid_graphics_mode"); + + if (mode == HYBRID_GRAPHICS_DISCRETE) { + printk(BIOS_DEBUG, "Hybrid graphics:" + " Disabling integrated GPU.\n"); + + *enable_igd = false; + *enable_peg = true; + } else if (mode == HYBRID_GRAPHICS_INTEGRATED) { + printk(BIOS_DEBUG, "Hybrid graphics:" + " Disabling discrete GPU.\n"); + + *enable_igd = true; + *enable_peg = false; + } + + gmux_dgpu_power_enable(dev, *enable_peg); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/32719 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I22b66622cd2da0e9951ee726d650d204fbb8a5bc Gerrit-Change-Number: 32719 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

7 30

Change in coreboot[master]: arch,toolchain,xcompile: Use GCC as linker
by Jacob Garber (Code Review) 13 Jan '23

13 Jan '23

Jacob Garber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40811 ) Change subject: arch,toolchain,xcompile: Use GCC as linker ...................................................................... arch,toolchain,xcompile: Use GCC as linker Code generation when using LTO is not done until after linking, so the compiler must be invoked at all linking stages instead of the linker. Replace $(LD) with GCC, and prefix all linker-specific flags with -Wl so they will be passed to the linker. Change-Id: Ia551cf84c8f6eb3b010450fc572876a318a257d1 Signed-off-by: Jacob Garber <jgarber1(a)ualberta.ca> --- M Makefile.inc M src/arch/arm/Makefile.inc M src/arch/arm64/Makefile.inc M src/arch/ppc64/Makefile.inc M src/arch/riscv/Makefile.inc M src/arch/x86/Makefile.inc M src/cpu/x86/smm/Makefile.inc M src/lib/Makefile.inc M toolchain.inc M util/xcompile/xcompile 10 files changed, 33 insertions(+), 33 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/11/40811/1 diff --git a/Makefile.inc b/Makefile.inc index e315732..ef95870 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -479,7 +479,7 @@ # Disable style checks for now ADAFLAGS_common += -gnatyN -LDFLAGS_common := --gc-sections -nostdlib -nostartfiles -static --emit-relocs +LDFLAGS_common := -nostdlib -nostartfiles -static -Wl,--emit-relocs,--gc-sections ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y) CFLAGS_common += -Werror diff --git a/src/arch/arm/Makefile.inc b/src/arch/arm/Makefile.inc index a8abfaf..f13bf1e 100644 --- a/src/arch/arm/Makefile.inc +++ b/src/arch/arm/Makefile.inc @@ -54,11 +54,11 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) --end-group + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) -Wl,--end-group $(objcbfs)/decompressor.debug: $$(decompressor-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(decompressor-objs)) --end-group + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(decompressor-objs)) -Wl,--end-group endif # CONFIG_ARCH_BOOTBLOCK_ARM @@ -70,7 +70,7 @@ $(objcbfs)/verstage.debug: $$(verstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(verstage-objs)) --end-group + $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(verstage-objs)) -Wl,--end-group verstage-y += boot.c verstage-y += div0.c @@ -103,7 +103,7 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group endif # CONFIG_ARCH_ROMSTAGE_ARM @@ -132,6 +132,6 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group endif # CONFIG_ARCH_RAMSTAGE_ARM diff --git a/src/arch/arm64/Makefile.inc b/src/arch/arm64/Makefile.inc index c3d1fe5..e9d6d05 100644 --- a/src/arch/arm64/Makefile.inc +++ b/src/arch/arm64/Makefile.inc @@ -50,11 +50,11 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) $(obj)/config.h @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) --end-group -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) -Wl,--end-group -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) $(objcbfs)/decompressor.debug: $$(decompressor-objs) $(obj)/config.h @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(decompressor-objs)) --end-group -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(decompressor-objs)) -Wl,--end-group -T $(call src-to-obj,decompressor,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) endif # CONFIG_ARCH_BOOTBLOCK_ARM64 @@ -66,7 +66,7 @@ $(objcbfs)/verstage.debug: $$(verstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(verstage-objs)) --end-group -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_verstage) $(LDFLAGS_verstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(verstage-objs)) -Wl,--end-group -T $(call src-to-obj,verstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) verstage-y += boot.c verstage-y += div0.c @@ -104,7 +104,7 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) endif # CONFIG_ARCH_ROMSTAGE_ARM64 @@ -139,7 +139,7 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) # Build ARM Trusted Firmware (BL31) diff --git a/src/arch/ppc64/Makefile.inc b/src/arch/ppc64/Makefile.inc index 1c35f6f..b8da940 100644 --- a/src/arch/ppc64/Makefile.inc +++ b/src/arch/ppc64/Makefile.inc @@ -29,8 +29,8 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) \ - -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) \ - $(LIBGCC_FILE_NAME_bootblock) --end-group $(COMPILER_RT_bootblock) + -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) \ + $(LIBGCC_FILE_NAME_bootblock) -Wl,--end-group $(COMPILER_RT_bootblock) endif @@ -55,7 +55,7 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group $(COMPILER_RT_romstage) + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group $(COMPILER_RT_romstage) romstage-c-ccopts += $(ppc64_flags) romstage-S-ccopts += $(ppc64_asm_flags) @@ -88,7 +88,7 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group $(COMPILER_RT_ramstage) + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group $(COMPILER_RT_ramstage) ramstage-c-ccopts += $(ppc64_flags) ramstage-S-ccopts += $(ppc64_asm_flags) diff --git a/src/arch/riscv/Makefile.inc b/src/arch/riscv/Makefile.inc index 17f225a..fd18e55 100644 --- a/src/arch/riscv/Makefile.inc +++ b/src/arch/riscv/Makefile.inc @@ -69,14 +69,14 @@ $(objcbfs)/bootblock.debug: $$(bootblock-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" $(LD_bootblock) $(LDFLAGS_bootblock) -o $@ -L$(obj) \ - -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(bootblock-objs)) \ - $(LIBGCC_FILE_NAME_bootblock) --end-group $(COMPILER_RT_bootblock) + -T $(call src-to-obj,bootblock,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(bootblock-objs)) \ + $(LIBGCC_FILE_NAME_bootblock) -Wl,--end-group $(COMPILER_RT_bootblock) bootblock-c-ccopts += $(riscv_flags) bootblock-S-ccopts += $(riscv_asm_flags) ifeq ($(CONFIG_ARCH_RISCV_RV32),y) -LDFLAGS_bootblock += -m elf32lriscv +LDFLAGS_bootblock += -Wl,-m,elf32lriscv endif #CONFIG_ARCH_RISCV_RV32 endif #CONFIG_ARCH_BOOTBLOCK_RISCV @@ -104,13 +104,13 @@ $(objcbfs)/romstage.debug: $$(romstage-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(romstage-objs)) --end-group $(COMPILER_RT_romstage) + $(LD_romstage) $(LDFLAGS_romstage) -o $@ -L$(obj) -T $(call src-to-obj,romstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(romstage-objs)) -Wl,--end-group $(COMPILER_RT_romstage) romstage-c-ccopts += $(riscv_flags) romstage-S-ccopts += $(riscv_asm_flags) ifeq ($(CONFIG_ARCH_RISCV_RV32),y) -LDFLAGS_romstage += -m elf32lriscv +LDFLAGS_romstage += -Wl,-m,elf32lriscv endif #CONFIG_ARCH_RISCV_RV32 endif #CONFIG_ARCH_ROMSTAGE_RISCV @@ -153,13 +153,13 @@ $(objcbfs)/ramstage.debug: $$(ramstage-objs) @printf " CC $(subst $(obj)/,,$(@))\n" - $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) --end-group $(COMPILER_RT_ramstage) + $(LD_ramstage) $(LDFLAGS_ramstage) -o $@ -L$(obj) -T $(call src-to-obj,ramstage,src/mainboard/$(MAINBOARDDIR)/memlayout.ld) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) -Wl,--end-group $(COMPILER_RT_ramstage) ramstage-c-ccopts += $(riscv_flags) ramstage-S-ccopts += $(riscv_asm_flags) ifeq ($(CONFIG_ARCH_RISCV_RV32),y) -LDFLAGS_ramstage += -m elf32lriscv +LDFLAGS_ramstage += -Wl,-m,elf32lriscv endif #CONFIG_ARCH_RISCV_RV32 endif #CONFIG_ARCH_RAMSTAGE_RISCV diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 2d00709..af52f70 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -77,7 +77,7 @@ $$(objcbfs)/$(1).debug: $$$$($(1)-libs) $$$$($(1)-objs) @printf " LINK $$(subst $$(obj)/,,$$(@))\n" - $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) --whole-archive --start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) --no-whole-archive $$(COMPILER_RT_$(1)) --end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) --oformat $(2) + $$(LD_$(1)) $$(LDFLAGS_$(1)) -o $$@ -L$$(obj) $$(COMPILER_RT_FLAGS_$(1)) -Wl,--whole-archive,--start-group $$(filter-out %.ld,$$($(1)-objs)) $$($(1)-libs) -Wl,--no-whole-archive $$(COMPILER_RT_$(1)) -Wl,--end-group -T $(call src-to-obj,$(1),$(dir)/memlayout.ld) -Wl,--oformat=$(2) -LANG=C LC_ALL= $$(OBJCOPY_$(1)) --only-section .illegal_globals $$(@) $$(objcbfs)/$(1)_null.offenders >/dev/null 2>&1 if [ -z "$$$$($$(NM_$(1)) $$(objcbfs)/$(1)_null.offenders 2>&1 | grep 'no symbols')" ];then \ echo "Forbidden global variables in $(1):"; \ @@ -209,11 +209,11 @@ postcar-y += postcar.c postcar-$(CONFIG_COLLECT_TIMESTAMPS_TSC) += timestamp.c -LDFLAGS_postcar += -Map $(objcbfs)/postcar.map +LDFLAGS_postcar += -Wl,-Map,$(objcbfs)/postcar.map $(objcbfs)/postcar.debug: $$(postcar-objs) @printf " LINK $(subst $(obj)/,,$(@))\n" - $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) --whole-archive --start-group $(filter-out %.ld,$^) --no-whole-archive $(COMPILER_RT_postcar) --end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) + $(LD_postcar) $(LDFLAGS_postcar) -o $@ -L$(obj) $(COMPILER_RT_FLAGS_postcar) -Wl,--whole-archive,--start-group $(filter-out %.ld,$^) -Wl,--no-whole-archive $(COMPILER_RT_postcar) -Wl,--end-group -T $(call src-to-obj,postcar,src/arch/x86/memlayout.ld) $(objcbfs)/postcar.elf: $(objcbfs)/postcar.debug.rmod cp $< $@ @@ -314,9 +314,9 @@ $(objgenerated)/ramstage.o: $$(ramstage-objs) $(COMPILER_RT_ramstage) $$(ramstage-libs) @printf " CC $(subst $(obj)/,,$(@))\n" ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) - $(LD_ramstage) -m elf_i386 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group + $(LD_ramstage) -Wl,-m,elf_i386 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) -Wl,--no-whole-archive $(COMPILER_RT_ramstage) -Wl,--end-group else - $(LD_ramstage) -m elf_x86_64 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) --whole-archive --start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) --no-whole-archive $(COMPILER_RT_ramstage) --end-group + $(LD_ramstage) -Wl,-m,elf_x86_64 -r -o $@ $(COMPILER_RT_FLAGS_ramstage) -Wl,--whole-archive,--start-group $(filter-out %.ld,$(ramstage-objs)) $(ramstage-libs) -Wl,--no-whole-archive $(COMPILER_RT_ramstage) -Wl,--end-group endif endif # CONFIG_ARCH_RAMSTAGE_X86_32 / CONFIG_ARCH_RAMSTAGE_X86_64 diff --git a/src/cpu/x86/smm/Makefile.inc b/src/cpu/x86/smm/Makefile.inc index 11a4e67..2e63fb3 100644 --- a/src/cpu/x86/smm/Makefile.inc +++ b/src/cpu/x86/smm/Makefile.inc @@ -26,7 +26,7 @@ smm-c-deps:=$$(OPTION_TABLE_H) $(obj)/smm/smm.o: $$(smm-objs) $(COMPILER_RT_smm) - $(LD_smm) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smm) --whole-archive --start-group $(smm-objs) --no-whole-archive $(COMPILER_RT_smm) --end-group + $(LD_smm) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smm) -Wl,--whole-archive,--start-group $(smm-objs) -Wl,--no-whole-archive $(COMPILER_RT_smm) -Wl,--end-group # change to the target path because objcopy will use the path name in its # ELF symbol names. @@ -53,7 +53,7 @@ # SMM Stub Module. The stub is used as a trampoline for relocation and normal # SMM handling. $(obj)/smmstub/smmstub.o: $$(smmstub-objs) $(COMPILER_RT_smmstub) - $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) --whole-archive --start-group $(smmstub-objs) --no-whole-archive $(COMPILER_RT_smmstub) --end-group + $(LD_smmstub) -nostdlib -r -o $@ $(COMPILER_RT_FLAGS_smmstub) -Wl,--whole-archive,--start-group $(smmstub-objs) -Wl,--no-whole-archive $(COMPILER_RT_smmstub) -Wl,--end-group # Link the SMM stub module with a 0-byte heap. ifeq ($(CONFIG_ARCH_RAMSTAGE_X86_32),y) diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 085f6b2..adcd16a 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -290,7 +290,7 @@ # rmdoule is named $(1).rmod define rmodule_link $(strip $(1)): $(strip $(2)) $$(COMPILER_RT_rmodules_$(4)) $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) | $$(RMODTOOL) - $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) --defsym=__heap_size=$(strip $(3)) -o $$@ --whole-archive --start-group $(filter-out %.ld,$(2)) --end-group + $$(LD_rmodules_$(4)) $$(LDFLAGS_rmodules_$(4)) $(RMODULE_LDFLAGS) -T $(call src-to-obj,rmodules_$(4),src/lib/rmodule.ld) -Wl,--defsym=__heap_size=$(strip $(3)) -o $$@ -Wl,--whole-archive,--start-group $(filter-out %.ld,$(2)) -Wl,--end-group $$(NM_rmodules_$(4)) -n $$@ > $$(basename $$(a)).map endef diff --git a/toolchain.inc b/toolchain.inc index 865227b..f52a518 100644 --- a/toolchain.inc +++ b/toolchain.inc @@ -117,7 +117,7 @@ $(error Check your .config file for CONFIG_ARCH_$(1)_* settings)) CC_$(1) := $(CC_$(2)) GCC_$(1) := $(GCC_CC_$(2)) -LD_$(1) := $(LD_$(2)) +LD_$(1) := $(CC_$(2)) NM_$(1) := $(NM_$(2)) AR_$(1) := $(AR_$(2)) GNATBIND_$(1) := $(GNATBIND_$(2)) @@ -130,7 +130,7 @@ CPPFLAGS_$(1) = $$(CPPFLAGS_common) $$(CPPFLAGS_$(2)) -D__ARCH_$(2)__ COMPILER_RT_$(1) := $$(COMPILER_RT_$(2)) COMPILER_RT_FLAGS_$(1) := $$(COMPILER_RT_FLAGS_$(2)) -LDFLAGS_$(1) = $$(LDFLAGS_common) $$(LDFLAGS_$(2)) +LDFLAGS_$(1) = $$(CFLAGS_$(1)) $$(LDFLAGS_common) $$(LDFLAGS_$(2)) endef # define_class: Allows defining any program as dynamic class and compiler tool diff --git a/util/xcompile/xcompile b/util/xcompile/xcompile index 18e08a0..5e32120 100755 --- a/util/xcompile/xcompile +++ b/util/xcompile/xcompile @@ -363,7 +363,7 @@ TCLIST="i386 x86_64" TWIDTH="32" TABI="elf" - CC_RT_EXTRA_GCC="--wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3" + CC_RT_EXTRA_GCC="-Wl,--wrap=__divdi3,--wrap=__udivdi3,--wrap=__moddi3,--wrap=__umoddi3" } arch_config_ppc64() { -- To view, visit https://review.coreboot.org/c/coreboot/+/40811 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia551cf84c8f6eb3b010450fc572876a318a257d1 Gerrit-Change-Number: 40811 Gerrit-PatchSet: 1 Gerrit-Owner: Jacob Garber <jgarber1(a)ualberta.ca> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Philipp Hug <philipp(a)hug.cx> Gerrit-Reviewer: ron minnich <rminnich(a)gmail.com> Gerrit-MessageType: newchange

10 45

Change in coreboot[master]: soc/intel/apl: Add ACPI for SBMBUS control
by Maxim Polyakov (Code Review) 09 Jan '23

09 Jan '23

Maxim Polyakov has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44507 ) Change subject: soc/intel/apl: Add ACPI for SBMBUS control ...................................................................... soc/intel/apl: Add ACPI for SBMBUS control Based on acpidump from AMI firmware on the Kontron mAL10 COMe module and SMBus Control Methods Interface Specification, Ver 1.0, 1999. Signed-off-by: Maxim Polyakov <max.senia.poliak(a)gmail.com> Change-Id: I3846266d3155bbe831123fef4751748ff0e00511 --- A src/soc/intel/apollolake/acpi/smbus.asl M src/soc/intel/apollolake/acpi/southbridge.asl 2 files changed, 795 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/44507/1 diff --git a/src/soc/intel/apollolake/acpi/smbus.asl b/src/soc/intel/apollolake/acpi/smbus.asl new file mode 100644 index 0000000..b41c0f2 --- /dev/null +++ b/src/soc/intel/apollolake/acpi/smbus.asl @@ -0,0 +1,792 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Device (SBUS) +{ + /* Intel SMBus Controller 0:1f.1 */ + Name (_ADR, 0x001F0001) + + OperationRegion (SMBP, PCI_Config, 0x40, 0xC0) + Field (SMBP, DWordAcc, NoLock, Preserve) + { + , 2, + I2CE, 1 + } + + OperationRegion (SMPB, PCI_Config, 0x20, 0x04) + Field (SMPB, DWordAcc, NoLock, Preserve) + { + , 5, + SBAR, 11 + } + + OperationRegion (SMBI, SystemIO, (SBAR << 0x05), 0x10) + Field (SMBI, ByteAcc, NoLock, Preserve) + { + HSTS, 8, // Host Status + Offset (0x02), + HCON, 8, // Host Control + HCOM, 8, // Host Command + TXSA, 8, // Transmit Slave Address + DAT0, 8, // Host Data 0 + DAT1, 8, // Host Data 1 + HBDR, 8, // Host Block Data Byte + PECR, 8, // Packet Error Check + RXSA, 8, // Receive Slave Data + SDAT, 16 + } + + // SMBus Send Byte + // Arg0: Address + // Arg1: Data + // Return: 1 = Success, 0=Failure + Method (SSXB, 2, Serialized) + { + If (STRT ()) + { // Is the SMBus Controller Ready? + Return (Zero) + } + + // Send Byte + // SMBus Enable + I2CE = Zero + HSTS = 0xBF + TXSA = Arg0 // Write Address + HCOM = Arg1 // Write Data + HCON = 0x48 // Start + Byte Data Protocol + If (COMP ()) + { + HSTS |= 0xFF // Clean up + Return (One) // Success + } + + Return (Zero) + } + + // SMBus Receive Byte + // Arg0: Address + // Return: 0xffff = Failure, Data (8bit) = Success + Method (SRXB, 1, Serialized) + { + // Is the SMBus Controller Ready? + If (STRT ()) + { + Return (0xFFFF) + } + + // Receive Byte + I2CE = Zero // SMBus Enable + HSTS = 0xBF + TXSA = (Arg0 | One) // Write Address + HCON = 0x44 + If (COMP ()) + { + HSTS |= 0xFF // Clean up + Return (DAT0) // Success + } + + Return (0xFFFF) + } + + // SMBus Write Byte + // Arg0: Address + // Arg1: Command + // Arg2: Data + // Return: 1 = Success, 0=Failure + Method (SWRB, 3, Serialized) + { + If (STRT ()) + { // Is the SMBus Controller Ready? + Return (Zero) + } + + I2CE = Zero // SMBus Enable + HSTS = 0xBF + TXSA = Arg0 // Write Address + HCOM = Arg1 // Write Command + DAT0 = Arg2 // Write Data + HCON = 0x48 // Start + Byte Protocol + If (COMP ()) + { + HSTS |= 0xFF // Clean up + Return (One) // Success + } + + Return (Zero) + } + + // SMBus Read Byte + // Arg0: Address + // Arg1: Command + // Return: 0xffff = Failure, Data (8bit) = Success + Method (SRDB, 2, Serialized) + { + If (STRT ()) + { // Is the SMBus Controller Ready? + Return (0xFFFF) + } + + I2CE = Zero // SMBus Enable + HSTS = 0xBF + // Write Address + TXSA = (Arg0 | One) + HCOM = Arg1 // Command + HCON = 0x48 // Start + If (COMP ()) + { + HSTS |= 0xFF // Clean up + Return (DAT0) // Success + } + + Return (0xFFFF) + } + + // SWRW - write word + // Arg0: Address + // Arg1: Command + // Arg2: Data + // Return: 0 on failure, 1, on success + Method (SWRW, 3, Serialized) + { + If (STRT ()) + { + Return (Zero) + } + + I2CE = Zero + HSTS = 0xBF + TXSA = Arg0 + HCOM = Arg1 + DAT1 = (Arg2 & 0xFF) + DAT0 = ((Arg2 >> 0x08) & 0xFF) + HCON = 0x4C + If (COMP ()) + { + HSTS |= 0xFF + Return (One) + } + + Return (Zero) + } + + // SRDW - read word + // Arg0: Address + // Arg1: Command + // Return: 0xffffffff on failure, the read word otherwise + Method (SRDW, 2, Serialized) + { + If (STRT ()) + { + Return (0xFFFF) + } + + I2CE = Zero + HSTS = 0xBF + TXSA = (Arg0 | One) + HCOM = Arg1 + HCON = 0x4C + If (COMP ()) + { + HSTS |= 0xFF + Return (((DAT0 << 0x08) | DAT1)) + } + + Return (0xFFFFFFFF) + } + + // SBLW - write block data + // Arg0: Address + // Arg1: Command + // Arg2: Data - data[0] is the number of bytes that follow + // Return: 0 on failure, 1, on success + Method (SBLW, 4, Serialized) + { + If (STRT ()) + { + Return (Zero) + } + + I2CE = Arg3 + HSTS = 0xBF + TXSA = Arg0 + HCOM = Arg1 + DAT0 = SizeOf (Arg2) + Local1 = Zero + HBDR = DerefOf (Arg2 [Zero]) + HCON = 0x54 + While ((SizeOf (Arg2) > Local1)) + { + Local0 = 0x0FA0 + While ((!(HSTS & 0x80) && Local0)) + { + Local0-- + Stall (0x32) + } + + If (!Local0) + { + KILL () + Return (Zero) + } + + HSTS = 0x80 + Local1++ + If ((SizeOf (Arg2) > Local1)) + { + HBDR = DerefOf (Arg2 [Local1]) + } + } + + If (COMP ()) + { + HSTS |= 0xFF + Return (One) + } + + Return (Zero) + } + + // SBLR - read block data + // Arg0: Address + // Arg1: Command + // Return: 0 on failure, the read data otherwise + Method (SBLR, 3, Serialized) + { + Name (TBUF, Buffer (0x0100){}) + If (STRT ()) + { + Return (Zero) + } + + I2CE = Arg2 + HSTS = 0xBF + TXSA = (Arg0 | One) + HCOM = Arg1 + HCON = 0x54 + Local0 = 0x0FA0 + While ((!(HSTS & 0x80) && Local0)) + { + Local0-- + Stall (0x32) + } + + If (!Local0) + { + KILL () + Return (Zero) + } + + TBUF [Zero] = DAT0 /* \_SB_.PCI0.SBUS.DAT0 */ + HSTS = 0x80 + Local1 = One + While ((Local1 < DerefOf (TBUF [Zero]))) + { + Local0 = 0x0FA0 + While ((!(HSTS & 0x80) && Local0)) + { + Local0-- + Stall (0x32) + } + + If (!Local0) + { + KILL () + Return (Zero) + } + + TBUF [Local1] = HBDR /* \_SB_.PCI0.SBUS.HBDR */ + HSTS = 0x80 + Local1++ + } + + If (COMP ()) + { + HSTS |= 0xFF + Return (TBUF) /* \_SB_.PCI0.SBUS.SBLR.TBUF */ + } + + Return (Zero) + } + + // Wait for SMBus to become ready + Method (STRT, 0, Serialized) + { + // Timeout 200ms + Local0 = 0xC8 + + While (Local0) + { + If ((HSTS & 0x40)) + { // Is used? + // timeout-- + Local0-- + + // Wait 1ms + Sleep (One) + If ((Local0 == Zero)) + { + Return (One) + } + } + Else + { + // We're ready + Local0 = Zero + } + } + + // Timeout 200ms (50us * 4000) + Local0 = 0x0FA0 + While (Local0) + { + If ((HSTS & One)) + { // Is the host busy? + // timeout-- + Local0-- + + // Wait 50us + Stall (0x32) + + If ((Local0 == Zero)) + { + KILL () + } + } + Else + { // Success + Return (Zero) + } + } + // Failure + Return (One) + } + + // Check if last operation completed + // return Failure = 0, Success = 1 + Method (COMP, 0, Serialized) + { + Local0 = 0x0FA0 // Timeout 200ms in 50us steps + While (Local0) + { + If ((HSTS & 0x02)) + { // Completion Status? + // Operation Completed + Return (One) + } + Else + { + Local0-- + Stall (0x32) + If ((Local0 == Zero)) + { + KILL () + } + } + } + Return (Zero) // Failure + } + + // Kill all SMBus communication + Method (KILL, 0, Serialized) + { + HCON |= 0x02 // Send Kill + HSTS |= 0xFF // Clean Status + } + + // SMBus transactional synchronization + Mutex (SBX0, 0x00) + + OperationRegion (SBU0, SystemIO, (SBAR << 0x05), 0x10) + Field (SBU0, ByteAcc, NoLock, Preserve) + { + HSTA, 8, + Offset (0x02), + HCNT, 8, + HCMD, 8, + HADD, 8, + HDT0, 8, + HDT1, 8, + BLKD, 8, + Offset (0x0D), + AUCT, 8 + } + + // SWTC - Wait for Transaction Complete + // Wait until the previous SMBus transaction has completed + // Arg0 : Timeout Value + // return + // 0x00 : OK + // 0x07 : Unknown Failure + // 0x10 : Address Not Acknowledged + // 0x11 : Device Error + // 0x12 : Command Access Denied + // 0x13 : Unknown Error + // 0x17 : Device Access Denied + // 0x18 : Timeout + // 0x19 : Unsupported Protocol + // 0x1A : Bus Busy + // 0x1F : PEC (CRC-8) Error + Method (SWTC, 1, NotSerialized) + { + Local0 = Arg0 + Local2 = 0x07 + // The previous command has completed when the protocol + // register is equal to 0 (zero). Wait <timeout> ms + // for this to occur. + Local1 = One + While ((Local1 == One)) + { + Local3 = (HSTA & 0x1E) + If ((Local3 != Zero)) + { + If ((Local3 == 0x02)) + { + Local2 = Zero + } + Else + { + Local2 = 0x07 + } + + Local1 = Zero + } + // Transaction isn't complete. Check for timeout, and if not, + // sleep 10ms and loop again. + ElseIf ((Local0 < 0x0A)) + { + Local2 = 0x18 // ERROR: Timeout occurred. + Local1 = Zero // Terminate loop. + } + Else + { + Sleep (0x0A) + Local0 -= 0x0A + } + } + Return (Local2) + } + + // SBR - SMBus Read + // Arg0 : Protocol (Integer) + // Arg1 : Slave Address (Integer) + // Arg2 : Command (Integer) + // return + // (0) : Status (Integer) + // (1) : Data Length (Integer) + // (2) : Data (Integer | Buffer) + Method (SBR, 3, Serialized) + { + I2CE = Zero + Local0 = Package (0x12) + { + 0x07, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero, + Zero + } + + // Make sure the protocol is valid, if not return the + // 'invalid protocol' status code. Note that this segment + // does not support packet error checking. + If ((Arg0 != 0x03)) + { // Read Quick + If ((Arg0 != 0x05)) + { // Receive Byte + If ((Arg0 != 0x07)) + { // Read Byte + If ((Arg0 != 0x09)) + { // Read Word + If ((Arg0 != 0x0B)) + { // Read Block + Local0 [Zero] = 0x19 + Return (Local0) + } + } + } + } + } + + // Acquire the SMBus mutex to ensure transactional synchronization. + If ((Acquire (SBX0, 0xFFFF) == Zero)) + { + // Initiate the transaction by writing the slave address, + // command, and protocol registers. Note that the command + // code and data length are always written, even if the + // protocol doesn't require it (it + // will be ignored). + HSTA = (HSTA | 0xFF) + HADD = (Arg1 | One) + HCMD = Arg2 + If ((Arg0 == 0x03)) + { // Read Quick + HCNT = ((HCNT & 0xA0) | 0x40) + } + + If ((Arg0 == 0x05)) + { // Receive Byte + HCNT = ((HCNT & 0xA0) | 0x44) + } + + If ((Arg0 == 0x07)) + { // Read Byte + HCNT = ((HCNT & 0xA0) | 0x48) + } + + If ((Arg0 == 0x09)) + { // Read Word + HCNT = ((HCNT & 0xA0) | 0x4C) + } + + If ((Arg0 == 0x0B)) + { // Read Block + AUCT &= 0xFD + HCNT = ((HCNT & 0xA0) | 0x54) + Local1 = Zero + } + Else + { + // Wait for completion + Local1 = SWTC (0x03E8) + } + + // Save the status code, data size, and data into the return + // package (if required by the protocol). + Local0 [Zero] = Local1 + If ((Local1 == Zero)) + { + If ((Arg0 == 0x05)) + { // Receive Byte + Local0 [One] = One + Local0 [0x02] = HDT0 + } + + If ((Arg0 == 0x07)) + { // Read Byte + Local0 [One] = One + Local0 [0x02] = HDT0 + } + + If ((Arg0 == 0x09)) + { // Read Word + Local0 [One] = 0x02 + Local2 = HDT1 + Local2 <<= 0x08 + Local2 += HDT0 + Local0 [0x02] = Local2 + } + + If ((Arg0 == 0x0B)) + { // Read Block + Local0 [Zero] = 0x07 + Local4 = 0x9C40 + While ((!(HSTA & 0x80) && Local4)) + { + Local4-- + Stall (0x32) + } + + If (!Local4) + { + HCNT |= 0x02 + HSTA |= 0xFF + Local0 [Zero] = 0x17 + Release (SBX0) + Return (Local0) + } + + Local0 [Zero] = Zero + Local2 = HDT0 + If ((Local2 > 0x10)) + { + Local2 = 0x10 + } + + Local0 [One] = Local2 + Local0 [0x02] = BLKD + Local3 = 0x03 + HSTA = 0x80 + While ((Local3 < (Local2 + 0x02))) + { + Local4 = 0x9C40 + While ((!(HSTA & 0x80) && Local4)) + { + Local4-- + Stall (0x32) + } + + If (!Local4) + { + HCNT |= 0x02 + HSTA |= 0xFF + Local0 [Zero] = 0x18 + Release (SBX0) + Return (Local0) + } + + Local0 [Local3] = BLKD + HSTA = 0x80 + Local3++ + } + } + } + + Release (SBX0) + } + + Return (Local0) + } + + // _SBW - SMBus Write + // + // Arg0 : Protocol Value (Integer) + // Arg1 : Slave Address (Integer) + // Arg2 : Command Code (Integer) + // Arg3 : Data Length (Integer) + // Arg4 : Data (Integer | Buffer) + // + // return Value (Package): + // (0) : Status (Integer) + Method (SBW, 5, Serialized) + { + I2CE = Zero + // Local0 is the return package. The status code is defaulted + // to 'unknown failure' (0x07). + Local0 = Package (0x01) + { + 0x07 + } + + // Make sure the protocol is valid, if not return the + // 'invalid protocol' status code. Note that this segment + // does not support packet error checking or the 'process call' + // protocol. + If ((Arg0 != 0x02)) + { // Write Quick + If ((Arg0 != 0x04)) + { // Send Byte + If ((Arg0 != 0x06)) + { // Write Byte + If ((Arg0 != 0x08)) + { // Write Word + If ((Arg0 != 0x0A)) + { // Write Block + Local0 [Zero] = 0x19 + Return (Local0) + } + } + } + } + } + + // Acquire the SMBus mutex to ensure transactional synchronization. + If ((Acquire (SBX0, 0xFFFF) == Zero)) + { + HSTA = (HSTA | 0xFF) + HADD = (Arg1 & 0xFE) + HCMD = Arg2 + If ((Arg0 == 0x02)) + { // Write Quick + HCNT = ((HCNT & 0xA0) | 0x40) + } + + If ((Arg0 == 0x04)) + { // Send Byte + HCNT = ((HCNT & 0xA0) | 0x44) + } + + If ((Arg0 == 0x06)) + { // Write Byte + HDT0 = Arg4 + HCNT = ((HCNT & 0xA0) | 0x48) + } + + If ((Arg0 == 0x08)) + { // Write Word + HDT0 = (Arg4 & 0xFF) + HDT1 = (Arg4 >> 0x08) + HCNT = ((HCNT & 0xA0) | 0x4C) + } + + If ((Arg0 == 0x0A)) + { // Write Block + If ((Arg3 > 0x10)) + { + Local0 [Zero] = 0x12 + Release (SBX0) + Return (Local0) + } + + If ((Arg3 == Zero)) + { + Local0 [Zero] = 0x12 + Release (SBX0) + Return (Local0) + } + + AUCT &= 0xFD + HDT0 = Arg3 + Local3 = One + BLKD = DerefOf (Arg4 [Zero]) + HCNT = ((HCNT & 0x80) | 0x54) + While ((Arg3 > Local3)) + { + Local4 = 0x9C40 + While ((!(HSTA & 0x80) && Local4)) + { + Local4-- + Stall (0x32) + } + + If (!Local4) + { + HCNT |= 0x02 + HSTA |= 0xFF + Local0 [Zero] = 0x18 + Release (SBX0) + Return (Local0) + } + + BLKD = DerefOf (Arg4 [Local3]) + Local3++ + HSTA = 0x80 + } + + Local4 = 0x9C40 + While ((!(HSTA & 0x80) && Local4)) + { + Local4-- + Stall (0x32) + } + + If (!Local4) + { + HCNT |= 0x02 + HSTA |= 0xFF + Local0 [Zero] = 0x18 + Release (SBX0) + Return (Local0) + } + + HSTA = 0x80 + } + + Local0 [Zero] = SWTC (0x03E8) + Release (SBX0) + } + + Return (Local0) + } +} diff --git a/src/soc/intel/apollolake/acpi/southbridge.asl b/src/soc/intel/apollolake/acpi/southbridge.asl index f4d1497..9a5a5ec 100644 --- a/src/soc/intel/apollolake/acpi/southbridge.asl +++ b/src/soc/intel/apollolake/acpi/southbridge.asl @@ -20,6 +20,9 @@ /* LPC */ #include <soc/intel/common/block/acpi/acpi/lpc.asl> +/* SMBus 0:1f.1 */ +#include "smbus.asl" + /* eMMC */ #include "scs.asl" -- To view, visit https://review.coreboot.org/c/coreboot/+/44507 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3846266d3155bbe831123fef4751748ff0e00511 Gerrit-Change-Number: 44507 Gerrit-PatchSet: 1 Gerrit-Owner: Maxim Polyakov <max.senia.poliak(a)gmail.com> Gerrit-Reviewer: Andrey Petrov <andrey.petrov(a)gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

7 19

Change in coreboot[master]: mb/asus/p2b: Add ACPI support for p3b-f
by Keith Hui (Code Review) 02 Jan '23

02 Jan '23

Keith Hui has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41098 ) Change subject: mb/asus/p2b: Add ACPI support for p3b-f ...................................................................... mb/asus/p2b: Add ACPI support for p3b-f Finally! Power button works to turn board on and off. ACPI hooks to manipulate power and message LEDs work. Change-Id: I3736532df0efde4399fb36eb19df8db511fac6ea Signed-off-by: Keith Hui <buurin(a)gmail.com> --- M src/mainboard/asus/p2b/Kconfig M src/mainboard/asus/p2b/dsdt.asl A src/mainboard/asus/p2b/suspend.asl A src/mainboard/asus/p2b/variants/p3b-f/suspend.asl 4 files changed, 393 insertions(+), 36 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/41098/1 diff --git a/src/mainboard/asus/p2b/Kconfig b/src/mainboard/asus/p2b/Kconfig index 1ad25e1..45018d6 100644 --- a/src/mainboard/asus/p2b/Kconfig +++ b/src/mainboard/asus/p2b/Kconfig @@ -29,7 +29,7 @@ select HAVE_PIRQ_TABLE select BOARD_ROMSIZE_KB_256 select SDRAMPWR_4DIMM if BOARD_ASUS_P2B_LS || BOARD_ASUS_P3B_F - select HAVE_ACPI_TABLES if BOARD_ASUS_P2B || BOARD_ASUS_P2B_LS + select HAVE_ACPI_TABLES if BOARD_ASUS_P2B || BOARD_ASUS_P2B_LS || BOARD_ASUS_P3B_F select BASE_ASUS_P2B_D if BOARD_ASUS_P2B_D || BOARD_ASUS_P2B_DS config MAX_CPUS diff --git a/src/mainboard/asus/p2b/dsdt.asl b/src/mainboard/asus/p2b/dsdt.asl index 88be9ba..623b575 100644 --- a/src/mainboard/asus/p2b/dsdt.asl +++ b/src/mainboard/asus/p2b/dsdt.asl @@ -53,6 +53,7 @@ { Offset (0x03), TO12, 1, /* Device trap 12 */ +#if !CONFIG(BOARD_ASUS_P3B_F) Offset (0x08), FANM, 1, /* GPO0, meant for fan */ Offset (0x09), @@ -61,33 +62,25 @@ , 2, , 16, MSG0, 1 /* GPO30, message LED */ +#endif } - /* Prepare To Sleep, Arg0 is target S-state */ - Method (\_PTS, 1, NotSerialized) + OperationRegion (ECOS, SystemIO, 0x72, 0x02) + Field (ECOS, ByteAcc, NoLock, Preserve) { - /* Disable fan, blink power LED, if not turning off */ - If (LNotEqual (Arg0, 0x05)) - { - Store (Zero, FANM) - Store (Zero, PLED) - } - - /* Arms SMI for device 12 */ - Store (One, TO12) - /* Put out a POST code */ - Or (Arg0, 0xF0, P80) + CIDX, 8, + CDAT, 8 } - Method (\_WAK, 1, NotSerialized) + IndexField (CIDX, CDAT, ByteAcc, NoLock, Preserve) { - /* Re-enable fan, stop power led blinking */ - Store (One, FANM) - Store (One, PLED) - /* wake OK */ - Return(Package(0x02){0x00, 0x00}) + Offset (0x58), + RTCS, 8, + Offset (0x5F), + SUS3, 1, + , 3, + SLST, 4 } - /* Root of the bus hierarchy */ Scope (\_SB) { @@ -169,19 +162,9 @@ } } - /* ACPI Message */ - Scope (\_SI) - { - Method (_MSG, 1, NotSerialized) - { - If (LEqual (Arg0, Zero)) - { - Store (One, MSG0) - } - Else - { - Store (Zero, MSG0) - } - } - } +#if CONFIG(BOARD_ASUS_P3B_F) +#include "variants/p3b-f/suspend.asl" +#else +#include "suspend.asl" +#endif } diff --git a/src/mainboard/asus/p2b/suspend.asl b/src/mainboard/asus/p2b/suspend.asl new file mode 100644 index 0000000..5d2b540 --- /dev/null +++ b/src/mainboard/asus/p2b/suspend.asl @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* ASUS P2B family board DSDT declarations (at top level) that does not apply to P3B-F */ + +/** + * ACPI message indicator. + * + * @param Arg0 Number of waiting messages + */ +Scope (\_SI) +{ + Method (_MSG, 1, NotSerialized) + { + If (LEqual (Arg0, Zero)) + { + Store (One, MSG0) + } + Else + { + Store (Zero, MSG0) + } + } +} + +/** + * Prepare To Sleep. + * + * @param Arg0 Target ACPI S-state + */ +Method (\_PTS, 1, NotSerialized) +{ + /*SLST = Arg0*/ + /* Disable fan, blink power LED. S5 will turn them off too */ + If (Arg0 != 5) + { + FANM = 0 + PLED = 0 + } + + /* Arms SMI for device 12 */ + Store (One, TO12) + /* Put out a POST code */ + P80 = 0xF0 | Arg0 +} + +/** + * System wake. + * + * Returns a 2-DWORD package of: + * Status: Wake status (0 = success, 1 = failure (power), 2 = failure (thermal)) + * PSS: Actual S-state power supply entered if not 0 + * + * @param Arg0 Target ACPI S-state + * @return See description + */ +Method (\_WAK, 1, NotSerialized) +{ + /* Re-enable fan, stop power led blinking */ + FANM = 1 + PLED = 1 + /* wake OK */ + Return(Package(0x02){0x00, 0x00}) +} + diff --git a/src/mainboard/asus/p2b/variants/p3b-f/suspend.asl b/src/mainboard/asus/p2b/variants/p3b-f/suspend.asl new file mode 100644 index 0000000..a84c700 --- /dev/null +++ b/src/mainboard/asus/p2b/variants/p3b-f/suspend.asl @@ -0,0 +1,309 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include "southbridge/intel/i82371eb/i82371eb.h" + +/* ASUS P3B-F board specific (top level) DSDT declarations */ + +Name (PRW1, Package (0x04) +{ + Package (0x02) {0x09, 0x01}, + Package (0x02) {0x08, 0x01}, + Package (0x02) {0x0A, 0x01}, + Package (0x02) {0x0B, 0x01} +}) + +Name (PRW3, Package (0x04) +{ + Package (0x02) { 0x09, 0x03 }, + Package (0x02) { 0x08, 0x03 }, + Package (0x02) { 0x0A, 0x03 }, + Package (0x02) { 0x0B, 0x04 } +}) + +Name (PRWT, Package (0x04) +{ + 0x09, + 0x08, + 0x0A, + 0x0B +}) + +/* SPRW(n) = (SUS3==0) ? PRW1[n] : PRW3[n] */ +Method (SPRW, 1, NotSerialized) +{ + Store (Match (PRWT, MEQ, Arg0, MTR, 0x00, 0x00), Local0) + If (LEqual (SUS3, Zero)) + { + Return (DerefOf (Index (PRW1, Local0))) + } + Else + { + Return (DerefOf (Index (PRW3, Local0))) + } +} + +/* + * SMBus driver functions + * + * These functions communicate with the AS99127F ASIC on the P3B-F to handle hardware + * sequencing required around S3 suspend and resume. This chip is undocumented except it has + * W83781D-compatible hardware monitoring features, and seems to be responsible for hiding the + * flashchip from internal programming via flashrom. + * + * Note: The SMBus host controller interface is located in the southbridge. + */ + /* The SMBus controller hardware interface. Only byte accesses covered. */ + OperationRegion (SM00, SystemIO, SMBUS_IO_BASE, 7) + Field (SM00, ByteAcc, NoLock, Preserve) + { + HSTS, 8, + Offset (0x02), + CTLR, 8, + CMDR, 8, + ADDR, 8, + DAT0, 8, + DAT1, 8 + } + /* Wait for SMBus activity to complete, error or not */ + Method (SWFS, 0, NotSerialized) + { + And (HSTS, 0x06, Local0) + While (Local0 == 0) + { + Stall (1) + And (HSTS, 0x06, Local0) + } + } + + /** + * Writes a byte to a SMBus device. + * + * @param Arg0 SMBus device ID << 1 + * @param Arg1 Command (register index in our case) + * @param Arg2 Data + */ + Method (WBYT, 3, NotSerialized) + { + Store (Arg0, ADDR) + Store (Arg1, CMDR) + Store (Arg2, DAT0) + Store (0xFF, HSTS) + Store (0x48, CTLR) /* Start a byte data R/W access */ + SWFS () + } + + /** + * Reads a byte from a SMBus device. + * + * @param Arg0 SMBus device ID << 1 + * @param Arg1 Command (register index in our case) + * @return Data read + */ + Method (RBYT, 2, NotSerialized) + { + Or (Arg0, 0x01, ADDR) /* Set bit 0, this will be a read */ + Store (Arg1, CMDR) + Store (0xFF, HSTS) + Store (0x48, CTLR) /* Start a byte data R/W access */ + + /* If interrupted without success, restart and try again */ + And (HSTS, 0x02, Local0) + While (LEqual (Local0, Zero)) + { + Store (0xFF, HSTS) + Store (0x48, CTLR) + SWFS () + And (HSTS, 0x02, Local0) + } + + Return (DAT0) /* \DAT0 */ + } + + Method (SGOH, 2, NotSerialized) + { + /* SMBus address 0x48 */ + Store (0x90, Local0) + Store (RBYT (Local0, Arg0), Local1) + Or (Local1, Arg1, Local1) + WBYT (Local0, Arg0, Local1) + } + + Method (SGOL, 2, NotSerialized) + { + Store (0x90, Local0) + Store (RBYT (Local0, Arg0), Local1) + Not (Arg1, Local2) + And (Local1, Local2, Local1) + WBYT (Local0, Arg0, Local1) + } + + Method (FANC, 1, NotSerialized) + { + /* SMBus address 0x2d */ + WBYT (0x5A, 0x59, Arg0) + } + + Method (FANP, 1, NotSerialized) + { + WBYT (0x5A, 0x5A, Arg0) + } + + Method (EN18, 0, NotSerialized) + { + Store (0x5A, Local0) + Store (RBYT (Local0, 0x5F), Local1) + And (Local1, 0xDF, Local1) + WBYT (Local0, 0x5F, Local1) + } + + Method (DS18, 0, NotSerialized) + { + Store (0x5A, Local0) + Store (RBYT (Local0, 0x5F), Local1) + Or (Local1, 0x20, Local1) + WBYT (Local0, 0x5F, Local1) + } + +/** + * Prepare To Sleep, + * + * @param Arg0 Target ACPI S-state + */ + Method (\_PTS, 1, NotSerialized) + { + SLST = Arg0 + If (Arg0 == 0x01) + { + /* Disable BX.PMCR[CRst_En] */ + Store (\_SB.PCI0.NB.PMCR, Local0) + And (Local0, 0xFE, \_SB.PCI0.NB.PMCR) + + /* Isolate CPU_STP# and SUS_STAT1# signals at GENCFG register */ + Store (\_SB.PCI0.PX40.FXS1, Local0) + Or (Local0, 0x24, Local1) + Store (Local1, \_SB.PCI0.PX40.FXS1) + + \_SB.PCI0.ENTER_CONFIG_MODE (0x0A) + /* In SIO Dev A CR E4 = xxxx01xx (these bits are reserved per datasheet?) */ + And (\_SB.PCI0.KBWK, 0xF7, Local0) + Or (Local0, 0x04, \_SB.PCI0.KBWK) + \_SB.PCI0.EXIT_CONFIG_MODE () + } + + If (Arg0 == 0x03) + { + SGOH (0x83, 0x04) + SGOL (0x80, 0x04) + SGOH (0x80, 0x04) + SGOH (0x83, 0x01) + EN18 () + } + + /* Arms SMI for device 12 */ + TO12 = 1 + /* Put out a POST code */ + P80 = 0xF0 | Arg0 + } + +/** + * System wake. + * + * Returns a 2-DWORD package of: + * Status: Wake status (0 = success, 1 = failure (power), 2 = failure (thermal)) + * PSS: Actual S-state power supply entered if not 0 + * + * @param Arg0 Target ACPI S-state + * @return See description + */ + Method (\_WAK, 1, NotSerialized) // _WAK: Wake + { + DS18 () + Store (Zero, TO12) + /* Restore CPU_STP# and SUS_STAT1# signals */ + Store (\_SB.PCI0.PX40.FXS1, Local0) + And (Local0, 0xDB, \_SB.PCI0.PX40.FXS1) + SGOL (0x83, 0x01) + \_SB.PCI0.ENTER_CONFIG_MODE (0x0A) + And (\_SB.PCI0.MSWK, 0xFD, Local1) + Store (Local1, \_SB.PCI0.MSWK) + /* In SIO Dev A CR E4 = xxxx00xx */ + And (\_SB.PCI0.KBWK, 0xF3, Local0) + Store (Local0, \_SB.PCI0.KBWK) + \_SB.PCI0.EXIT_CONFIG_MODE () + /* Put out a POST code */ + P80 = 0xFF + Return(Package(0x02){0x00, 0x00}) + } + + Scope (\_GPE) + { + Method (_L0A, 0, NotSerialized) // _Lxx: Level-Triggered GPE + { + Notify (\_SB.PCI0.SER2, 0x02) // Device Wake + Notify (\_SB.PCI0.SER3, 0x02) // Device Wake + } + + Method (_L09, 0, NotSerialized) // _Lxx: Level-Triggered GPE + { + Notify (\_SB.PCI0, 0x02) // Device Wake + } + } + +Scope (\_SI) +{ + /** + * ACPI message indicator + * + * @param Arg0 Number of waiting messages + */ + Method (_MSG, 1, NotSerialized) + { + If (LEqual (Arg0, Zero)) + { + SGOL (0x81, 0x02) + SGOH (0x81, 0x01) + SGOL (0x81, 0x01) + } + Else + { + SGOH (0x81, 0x02) + SGOL (0x81, 0x02) + } + } + + + /** + * System Status. OS calls to set system status indicator. + * Arg0: + * 0 = Indicator off + * 1 = Working + * 2 = Waking + * 3 = Sleeping: States S1, S2, S3 + * 4 = Sleeping with context saved to non-volatile storage. + * + * @param Arg0 System status indicator + */ + Method (_SST, 1, NotSerialized) // _SST: System Status + { + If (LEqual (Arg0, 0x00)) + { + SGOH (0x80, 0x40) + } + ElseIf (LEqual (Arg0, 0x03)) + { + SGOL (0x80, 0x40) + SGOL (0x80, 0x80) + FANC (0x81) + FANP (0x81) + } + Else + { + SGOL (0x80, 0x40) + SGOH (0x80, 0x80) + FANC (0x8F) + FANP (0x8F) + } + } +} + -- To view, visit https://review.coreboot.org/c/coreboot/+/41098 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3736532df0efde4399fb36eb19df8db511fac6ea Gerrit-Change-Number: 41098 Gerrit-PatchSet: 1 Gerrit-Owner: Keith Hui <buurin(a)gmail.com> Gerrit-MessageType: newchange

5 22

Change in coreboot[master]: sb/intel/i82371eb: Implement SMBus Control Method Interface support
by Keith Hui (Code Review) 02 Jan '23

02 Jan '23

Keith Hui has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41735 ) Change subject: sb/intel/i82371eb: Implement SMBus Control Method Interface support ...................................................................... sb/intel/i82371eb: Implement SMBus Control Method Interface support Upcoming ACPI support for asus/p3b-f mainboard contains ASL code to manipulate its AS99127F chip over SMBus before and after suspend, to blink front panel lights, turn off fans, among other things. This code caused an ACPI/PCI resource conflict that disabled access to the entire SMBus, rendering its hardware monitor inoperative, and all resolution attempts so far have not worked. This is an attempt to expand the ASL SMBus routines into a complete SMBus Control Method Interface (SCMI), that Linux kernel can use via the i2c-scmi driver, sidestepping this conflict. Because SCMI methods begin with an underscore, which iasl considers "unknown reserved name", on which our build process errors out, it must also be told to ignore this particular warning, at least for asus/p3b-f. Change-Id: I97deb2d292af25e42068474f48e11c94a7480be6 Signed-off-by: Keith Hui <buurin(a)gmail.com> --- M Makefile.inc M src/southbridge/intel/i82371eb/acpi/i82371eb.asl 2 files changed, 183 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/35/41735/1 diff --git a/Makefile.inc b/Makefile.inc index 210e9cf..d1aebd3 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -253,11 +253,17 @@ # "Multiple types (Device object requires either a _HID or _ADR, but not both)" MULTIPLE_TYPES_WARNING = 3073 +UNKNOWN_RESERVED_NAME = 3133 + ifeq ($(CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT)$(CONFIG_SOC_INTEL_BROADWELL),y) IGNORED_IASL_WARNINGS = -vw $(EMPTY_RESOURCE_TEMPLATE_WARNING) -vw $(REDUNDANT_OFFSET_REMARK) -vw $(MULTIPLE_TYPES_WARNING) else +ifeq ($(CONFIG_BOARD_ASUS_P3B_F),y) +IGNORED_IASL_WARNINGS = -vw $(EMPTY_RESOURCE_TEMPLATE_WARNING) -vw $(REDUNDANT_OFFSET_REMARK) -vw $(UNKNOWN_RESERVED_NAME) +else IGNORED_IASL_WARNINGS = -vw $(EMPTY_RESOURCE_TEMPLATE_WARNING) -vw $(REDUNDANT_OFFSET_REMARK) endif +endif define asl_template $(CONFIG_CBFS_PREFIX)/$(1).aml-file = $(obj)/$(1).aml diff --git a/src/southbridge/intel/i82371eb/acpi/i82371eb.asl b/src/southbridge/intel/i82371eb/acpi/i82371eb.asl index b64036e..27c2a3c 100644 --- a/src/southbridge/intel/i82371eb/acpi/i82371eb.asl +++ b/src/southbridge/intel/i82371eb/acpi/i82371eb.asl @@ -2,6 +2,8 @@ #include "southbridge/intel/i82371eb/i82371eb.h" +#define SCMI_MUTEX SBX0 + /* Declares assorted devices that falls under this southbridge. */ Device (PX40) { @@ -135,4 +137,179 @@ }) Return (BUF1) } +/* Begin SCMI implementation */ + Mutex(SCMI_MUTEX, 1) + + Device (SMB0) + { + OperationRegion (SM00, SystemIO, SMBUS_IO_BASE, 7) + /* Should have been SMBUS01, but Intel iasl won't accept */ + Name (_HID, "SMB0001") + + Field (SM00, ByteAcc, NoLock, Preserve) + { + HSTS, 8, + Offset (0x02), + CTLR, 8, + CMDR, 8, + ADDR, 8, + DAT0, 8, + DAT1, 8 + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () + { + /* SMBus register ports */ + IO (Decode16, SMBUS_IO_BASE, SMBUS_IO_BASE, 0x01, 0x10, ) + }) + Return (BUF1) + } + /** + * SCMI: SMBus Information + * + * @return SMBus information buffer + */ + Method (_SBI, 0) + { + Local0 = Package(2) {0x10, Buffer() + { + 0x10, 0x10, /* SCMI and SMBus versions, both 1.0 */ + 0, 0, + 3, /* Device count */ + 0x2d, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0x48, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0x49, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0 + } + }; + return (Local0) + } + /** + * Read from a SMBus device. + * + * @param Arg0 Protocol + * @param Arg1 Slave address + * @param Arg2 Command (register index in our case) + * @return Package (status code, data length, data) + */ + Method (_SBR, 3) { + Local2 = Package(3) {0, 0, 0} + if (Arg0 == 0x07) + { + Local0 = 0x48 /* Start a byte data R/W access */ + Local3 = 1; /* 1 byte */ + } + elseif (Arg0 == 0x09) + { + Local0 = 0x4c /* Start a word data R/W access */ + } + else + { + Index(Local2, 0) = 0x19 // Protocol not supported + return (Local2) + } + if (HSTS & 0x01) + { + Index(Local2, 0) = 0x1a // Bus busy + return (Local2) + } + if (Acquire(SCMI_MUTEX, 100)) + { + Index(Local2, 0) = 0x18 // Timeout + } else { + ADDR = (Arg1 << 1) | 0x01 /* Set bit 0, this is a read */ + CMDR = Arg2 + HSTS = 0xFF + CTLR = Local0 + + while (HSTS & 0x01) + { + Stall(1) + } + if (HSTS & 0x06) + { + Index(Local2, 0) = 0x11 /* Device error */ + } + else + { + Local1 = DAT0 + /* Get high byte of word read */ + if (Arg0 == 0x09) + { + Local1 |= (DAT1 << 8) + Local3 = 2 /* 2 bytes */ + } + Index(Local2, 1) = Local3 + Index(Local2, 2) = Local1 + } + Release(SCMI_MUTEX); + } + return (Local2); + } + /** + * Write to a SMBus device. + * + * @param Arg0 Protocol + * @param Arg1 Slave address + * @param Arg2 Command (register index in our case) + * @param Arg3 Data length + * @param Arg4 Data + * @return Status code + */ + Method (_SBW, 5) { + if (Arg0 == 0x06) + { + Local0 = 0x48 /* Start a byte data R/W access */ + } + elseif (Arg0 == 0x08) + { + Local0 = 0x4c /* Start a word data R/W access */ + } + else + { + Return (0x19) //* Protocol not supported */ + } + if (HSTS & 0x01) + { + Return (0x1a) /* Bus busy */ + } + if (Acquire(SCMI_MUTEX, 100)) + { + Local1 = 0x18 /* Timeout */ + } + else + { + Local1 = 0 + ADDR = Arg1 << 1 + CMDR = Arg2 + DAT0 = Arg4 + if (Arg0 == 0x08) { + DAT1 = Arg4 >> 8 + } + HSTS = 0xFF + CTLR = Local0 + while (HSTS & 0x01) + { + Stall(1) + } + if (HSTS & 0x06) + { + Local1 = 0x11 /* Device error */ + } + Release(SCMI_MUTEX) + } + return (Local1); + } + /* _SBT, _SBA not implemented */ + } +/* End SCMI implementation */ } -- To view, visit https://review.coreboot.org/c/coreboot/+/41735 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I97deb2d292af25e42068474f48e11c94a7480be6 Gerrit-Change-Number: 41735 Gerrit-PatchSet: 1 Gerrit-Owner: Keith Hui <buurin(a)gmail.com> Gerrit-MessageType: newchange

4 19

← Newer
1
2
3
4
5
6
7
...
648
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit February 2022