coreboot-gerrit July 2020

coreboot-gerrit@coreboot.org

1 participants
3167 discussions

Change in coreboot[master]: soc/intel/(fsp_)baytrail: Initialize SPI before console init
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36407 ) Change subject: soc/intel/(fsp_)baytrail: Initialize SPI before console init ...................................................................... soc/intel/(fsp_)baytrail: Initialize SPI before console init This makes the spi flash console function during romstage. It was tested with the FSP baytrail codepath but it's a safe assumption that the same fix also applies for the google mrc.bin codepath. Tested on Intel Minnowboard Turbot. Change-Id: If6ef0eeea902ab76d398d0218ee943e482f69b43 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/soc/intel/baytrail/romstage/romstage.c M src/soc/intel/fsp_baytrail/romstage/romstage.c 2 files changed, 5 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/36407/1 diff --git a/src/soc/intel/baytrail/romstage/romstage.c b/src/soc/intel/baytrail/romstage/romstage.c index 7c129e2..e06c39e 100644 --- a/src/soc/intel/baytrail/romstage/romstage.c +++ b/src/soc/intel/baytrail/romstage/romstage.c @@ -165,10 +165,10 @@ if (CONFIG(ENABLE_BUILTIN_COM1)) byt_config_com1_and_enable(); - console_init(); - spi_init(); + console_init(); + set_max_freq(); punit_init(); diff --git a/src/soc/intel/fsp_baytrail/romstage/romstage.c b/src/soc/intel/fsp_baytrail/romstage/romstage.c index f347591..78aa9fc 100644 --- a/src/soc/intel/fsp_baytrail/romstage/romstage.c +++ b/src/soc/intel/fsp_baytrail/romstage/romstage.c @@ -171,9 +171,11 @@ byt_config_com1_and_enable(); post_code(0x43); - console_init(); spi_init(); + + console_init(); + baytrail_rtc_init(); /* Call into mainboard. */ -- To view, visit https://review.coreboot.org/c/coreboot/+/36407 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If6ef0eeea902ab76d398d0218ee943e482f69b43 Gerrit-Change-Number: 36407 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

4 3

Change in coreboot[master]: arch/acpi.h: Avoid explicitly assign values to enum names
by Name of user not set (Code Review) 07 Aug '23

07 Aug '23

Name of user not set #1002476 has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36430 ) Change subject: arch/acpi.h: Avoid explicitly assign values to enum names ...................................................................... arch/acpi.h: Avoid explicitly assign values to enum names Compiler by default assign values starting from the initial integral constant. Change-Id: I1a5aa9762051780b67013f67f101112fc7a0bf6e Signed-off-by: Himanshu Sahdev <himanshusah(a)hcl.com> --- M src/arch/x86/include/arch/acpi.h 1 file changed, 19 insertions(+), 19 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/30/36430/1 diff --git a/src/arch/x86/include/arch/acpi.h b/src/arch/x86/include/arch/acpi.h index 479067f..a9bd9f6 100644 --- a/src/arch/x86/include/arch/acpi.h +++ b/src/arch/x86/include/arch/acpi.h @@ -302,10 +302,10 @@ enum dev_scope_type { SCOPE_PCI_ENDPOINT = 1, - SCOPE_PCI_SUB = 2, - SCOPE_IOAPIC = 3, - SCOPE_MSI_HPET = 4, - SCOPE_ACPI_NAMESPACE_DEVICE = 5 + SCOPE_PCI_SUB, + SCOPE_IOAPIC, + SCOPE_MSI_HPET, + SCOPE_ACPI_NAMESPACE_DEVICE }; typedef struct dev_scope { @@ -321,11 +321,11 @@ } __packed dev_scope_t; enum dmar_type { - DMAR_DRHD = 0, - DMAR_RMRR = 1, - DMAR_ATSR = 2, - DMAR_RHSA = 3, - DMAR_ANDD = 4 + DMAR_DRHD, + DMAR_RMRR, + DMAR_ATSR, + DMAR_RHSA, + DMAR_ANDD }; enum { @@ -599,15 +599,15 @@ /* FADT Preferred Power Management Profile */ enum acpi_preferred_pm_profiles { - PM_UNSPECIFIED = 0, - PM_DESKTOP = 1, - PM_MOBILE = 2, - PM_WORKSTATION = 3, - PM_ENTERPRISE_SERVER = 4, - PM_SOHO_SERVER = 5, - PM_APPLIANCE_PC = 6, - PM_PERFORMANCE_SERVER = 7, - PM_TABLET = 8, /* ACPI 5.0 & greater */ + PM_UNSPECIFIED, + PM_DESKTOP, + PM_MOBILE, + PM_WORKSTATION3, + PM_ENTERPRISE_SERVER4, + PM_SOHO_SERVER, + PM_APPLIANCE_PC, + PM_PERFORMANCE_SERVER, + PM_TABLET, /* ACPI 5.0 & greater */ }; /* FACS (Firmware ACPI Control Structure) */ @@ -780,7 +780,7 @@ }; enum acpi_ipmi_interface_type { - IPMI_INTERFACE_RESERVED = 0, + IPMI_INTERFACE_RESERVED, IPMI_INTERFACE_KCS, IPMI_INTERFACE_SMIC, IPMI_INTERFACE_BT, -- To view, visit https://review.coreboot.org/c/coreboot/+/36430 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I1a5aa9762051780b67013f67f101112fc7a0bf6e Gerrit-Change-Number: 36430 Gerrit-PatchSet: 1 Gerrit-Owner: Name of user not set #1002476 Gerrit-MessageType: newchange

4 7

Change in coreboot[master]: arch/riscv: Fix cpu capabilities detection function
by Xiang Wang (Code Review) 07 Aug '23

07 Aug '23

Xiang Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36944 ) Change subject: arch/riscv: Fix cpu capabilities detection function ...................................................................... arch/riscv: Fix cpu capabilities detection function On some platforms, misa may not be implemented. On such a platform, reading misa will get zero. At this time, soc is required to implement a non-standard method to detect the soc function. This modification add interfaces for non-standard function. The MXL field of misa is always at the highest two bits, whether it is a 32-bit 64-bit or a 128-bit machine. Therefore, this modification fixes the use of a fixed offset to detect the machine length. Change-Id: Id24f77bf21ef0c7c300faa477d67294d093eeecc Signed-off-by: Xiang Wang <merle(a)hardenedlinux.org> --- M src/arch/riscv/Makefile.inc A src/arch/riscv/cpu.c M src/arch/riscv/include/arch/cpu.h 3 files changed, 87 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/36944/1 diff --git a/src/arch/riscv/Makefile.inc b/src/arch/riscv/Makefile.inc index 0038523..0679be73 100644 --- a/src/arch/riscv/Makefile.inc +++ b/src/arch/riscv/Makefile.inc @@ -60,6 +60,7 @@ bootblock-y += trap_util.S bootblock-y += trap_handler.c bootblock-y += fp_asm.S +bootblock-y += cpu.c bootblock-y += misaligned.c bootblock-y += sbi.c bootblock-y += mcall.c @@ -100,6 +101,7 @@ romstage-y += boot.c romstage-y += romstage.c romstage-y += misc.c +romstage-y += cpu.c romstage-$(ARCH_RISCV_PMP) += pmp.c romstage-y += smp.c romstage-y += \ @@ -137,6 +139,7 @@ ramstage-y += trap_util.S ramstage-y += trap_handler.c ramstage-y += fp_asm.S +ramstage-y += cpu.c ramstage-y += misaligned.c ramstage-y += sbi.c ramstage-y += virtual_memory.c diff --git a/src/arch/riscv/cpu.c b/src/arch/riscv/cpu.c new file mode 100644 index 0000000..69556f3 --- /dev/null +++ b/src/arch/riscv/cpu.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/cpu.h> + + +__weak int soc_supports_extension(char ext) +{ + return 0; +} + +__weak int soc_machine_xlen(void) +{ + return -1; +} diff --git a/src/arch/riscv/include/arch/cpu.h b/src/arch/riscv/include/arch/cpu.h index c62199e..72a8a69 100644 --- a/src/arch/riscv/include/arch/cpu.h +++ b/src/arch/riscv/include/arch/cpu.h @@ -18,6 +18,7 @@ #include <arch/encoding.h> #include <device/device.h> +#include <commonlib/compiler.h> #define asmlinkage @@ -42,15 +43,68 @@ uint8_t riscv_model; }; +/* If the SOC does not implement misa, the read misa will be zero. + * Such SOC requires a non-standard mechanism to detect ISA extensions. + * If the soc does not implement misa, implement this function. + * */ +int soc_supports_extension(char ext); + static inline int supports_extension(char ext) { - return read_csr(misa) & (1 << (ext - 'A')); + uintptr_t isa = read_csr(misa); + if (isa) + return isa & (1 << (ext - 'A')); + else + return soc_supports_extension(ext); } +/* If the SOC does not implement misa, the read misa will be zero. + * Such SOC requires a non-standard mechanism to detect machine XLEN. + * If the soc does not implement misa, implement this function. + * */ +int soc_machine_xlen(void); + static inline int machine_xlen(void) { - int mxl = (read_csr(misa) >> (__riscv_xlen - 2)) & 3; - return (1 << mxl) * 16; + int r; + asm ( + "csrr t0, misa\n\t" + "bnez t0, 1f\n\t" + "call soc_machine_xlen\n\t" + "j 2f\n" + "1:\n\t" + "srli t1, t0, 30\n\t" + "srli t1, t1, 32\n\t" + "srli t1, t1, 32\n\t" + "srli t1, t1, 32\n\t" + "andi t1, t1, 3\n\t" + "li t2, 3\n\t" + "bne t1, t2, 1f\n\t" + "li %0, 128\n\t" + "j 2f\n" + "1:\n\t" + "srli t1, t0, 30\n\t" + "srli t1, t1, 32\n\t" + "andi t1, t1, 3\n\t" + "li t2, 2\n\t" + "bne t1, t2, 1f\n\t" + "li %0, 64\n\t" + "j 2f\n" + "1:\n\t" + "srli t1, t0, 30\n\t" + "andi t1, t1, 3\n\t" + "li t2, 1\n\t" + "bne t1, t2, 1f\n\t" + "li %0, 32\n\t" + "j 2f\n" + "1:\n\t" + "li %0, -1\n" + "2:" + : "=r"(r) + : + : "t0", "t1", "t2", "ra" + ); + return r; } struct cpu_info *cpu_info(void); -- To view, visit https://review.coreboot.org/c/coreboot/+/36944 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id24f77bf21ef0c7c300faa477d67294d093eeecc Gerrit-Change-Number: 36944 Gerrit-PatchSet: 1 Gerrit-Owner: Xiang Wang <merle(a)hardenedlinux.org> Gerrit-MessageType: newchange

2 11

Change in coreboot[master]: arch/riscv: Add soc interface to get mtime frequency
by Xiang Wang (Code Review) 07 Aug '23

07 Aug '23

Xiang Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37549 ) Change subject: arch/riscv: Add soc interface to get mtime frequency ...................................................................... arch/riscv: Add soc interface to get mtime frequency The mtime clock is not microseconds, but is determined by the specific platform. So timer_monotonic_get needs to know the frequency of mtime. Change-Id: I7d11d3ae73bc5dc81f2239829e1c5c7b4624800e Signed-off-by: Xiang Wang <merle(a)hardenedlinux.org> --- M src/arch/riscv/arch_timer.c M src/arch/riscv/include/mcall.h M src/mainboard/emulation/qemu-riscv/Makefile.inc M src/mainboard/emulation/qemu-riscv/clint.c M src/mainboard/emulation/spike-riscv/Makefile.inc M src/mainboard/emulation/spike-riscv/clint.c M src/soc/sifive/fu540/clint.c 7 files changed, 25 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/37549/1 diff --git a/src/arch/riscv/arch_timer.c b/src/arch/riscv/arch_timer.c index 55b1f72..1353abd 100644 --- a/src/arch/riscv/arch_timer.c +++ b/src/arch/riscv/arch_timer.c @@ -24,5 +24,6 @@ { if (HLS()->time == NULL) die("time not set in HLS"); - mono_time_set_usecs(mt, (long)read64((void *)(HLS()->time))); + long time = (long)read64((void *)(HLS()->time)); + mono_time_set_usecs(mt, time / (mtime_frequency() / 1000000)); } diff --git a/src/arch/riscv/include/mcall.h b/src/arch/riscv/include/mcall.h index d7d67ce..24b46a7 100644 --- a/src/arch/riscv/include/mcall.h +++ b/src/arch/riscv/include/mcall.h @@ -93,6 +93,12 @@ */ void set_msip(int hartid, int val); +/* + * This function is used to get frequency of mtime, + * need be implement by SoC code + */ +long mtime_frequency(void); + #endif // __ASSEMBLER__ #endif diff --git a/src/mainboard/emulation/qemu-riscv/Makefile.inc b/src/mainboard/emulation/qemu-riscv/Makefile.inc index eb99544..2ca75fd 100644 --- a/src/mainboard/emulation/qemu-riscv/Makefile.inc +++ b/src/mainboard/emulation/qemu-riscv/Makefile.inc @@ -19,6 +19,7 @@ romstage-y += romstage.c romstage-y += uart.c romstage-y += rom_media.c +romstage-y += clint.c ramstage-y += uart.c ramstage-y += rom_media.c diff --git a/src/mainboard/emulation/qemu-riscv/clint.c b/src/mainboard/emulation/qemu-riscv/clint.c index 367d48d..96d0f1d 100644 --- a/src/mainboard/emulation/qemu-riscv/clint.c +++ b/src/mainboard/emulation/qemu-riscv/clint.c @@ -23,3 +23,8 @@ HLS()->time = (uint64_t *)(QEMU_VIRT_CLINT + 0xbff8); HLS()->timecmp = (uint64_t *)(QEMU_VIRT_CLINT + 0x4000 + 8 * hart_id); } + +long mtime_frequency(void) +{ + return 1000000; +} diff --git a/src/mainboard/emulation/spike-riscv/Makefile.inc b/src/mainboard/emulation/spike-riscv/Makefile.inc index 38977b6..bfeaf58 100644 --- a/src/mainboard/emulation/spike-riscv/Makefile.inc +++ b/src/mainboard/emulation/spike-riscv/Makefile.inc @@ -18,6 +18,7 @@ romstage-y += romstage.c romstage-y += uart.c romstage-y += rom_media.c +romstage-y += clint.c ramstage-y += uart.c ramstage-y += rom_media.c ramstage-y += clint.c diff --git a/src/mainboard/emulation/spike-riscv/clint.c b/src/mainboard/emulation/spike-riscv/clint.c index 7ad3f5a..4c2b8fa 100644 --- a/src/mainboard/emulation/spike-riscv/clint.c +++ b/src/mainboard/emulation/spike-riscv/clint.c @@ -24,3 +24,8 @@ HLS()->time = (uint64_t *)(SPIKE_CLINT_BASE + 0xbff8); HLS()->timecmp = (uint64_t *)(SPIKE_CLINT_BASE + 0x4000 + 8 * hart_id); } + +long mtime_frequency(void) +{ + return 1000000; +} diff --git a/src/soc/sifive/fu540/clint.c b/src/soc/sifive/fu540/clint.c index 699273e..09ec719 100644 --- a/src/soc/sifive/fu540/clint.c +++ b/src/soc/sifive/fu540/clint.c @@ -29,3 +29,8 @@ { write32((void *)(FU540_CLINT + 4 * (uintptr_t)hartid), !!val); } + +long mtime_frequency(void) +{ + return 1000000; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/37549 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7d11d3ae73bc5dc81f2239829e1c5c7b4624800e Gerrit-Change-Number: 37549 Gerrit-PatchSet: 1 Gerrit-Owner: Xiang Wang <merle(a)hardenedlinux.org> Gerrit-MessageType: newchange

2 6

Change in coreboot[master]: Inicial device tree for Microtech etabpro Platform Intel GLK Tablet w...
by Miroslaw Kocur (Code Review) 07 Aug '23

07 Aug '23

Miroslaw Kocur has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39277 ) Change subject: Inicial device tree for Microtech etabpro Platform Intel GLK Tablet with the stylus and attachable keyboard ...................................................................... Inicial device tree for Microtech etabpro Platform Intel GLK Tablet with the stylus and attachable keyboard Not working so far Changes: - clean code Change-Id: Ib9d755902f28b51823e16c228ee5d4fc13849798 Signed-off-by: mirek190 <mirek190(a)gmail.com> --- A src/mainboard/microtech/Kconfig A src/mainboard/microtech/Kconfig.name A src/mainboard/microtech/etabpro/Kconfig A src/mainboard/microtech/etabpro/Kconfig.name A src/mainboard/microtech/etabpro/Makefile.inc A src/mainboard/microtech/etabpro/board_info.txt A src/mainboard/microtech/etabpro/bootblock.c A src/mainboard/microtech/etabpro/devicetree.cb A src/mainboard/microtech/etabpro/dptf.asl A src/mainboard/microtech/etabpro/dsdt.asl A src/mainboard/microtech/etabpro/etab.fmd A src/mainboard/microtech/etabpro/gpio.c A src/mainboard/microtech/etabpro/gpio.h A src/mainboard/microtech/etabpro/mainboard.c A src/mainboard/microtech/etabpro/memory.c A src/mainboard/microtech/etabpro/romstage.c A src/mainboard/microtech/etabpro/touchpad.asl A src/mainboard/microtech/etabpro/touchpanel.asl A src/mainboard/microtech/etabpro/variants.h 19 files changed, 1,561 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/77/39277/1 diff --git a/src/mainboard/microtech/Kconfig b/src/mainboard/microtech/Kconfig new file mode 100644 index 0000000..a757136 --- /dev/null +++ b/src/mainboard/microtech/Kconfig @@ -0,0 +1,16 @@ +if VENDOR_MICROTECH + +choice + prompt "Mainboard model" + +source "src/mainboard/microtech/*/Kconfig.name" + +endchoice + +source "src/mainboard/microtech/*/Kconfig" + +config MAINBOARD_VENDOR + string + default "MCROTECH" + +endif # VENDOR_MICROTECH diff --git a/src/mainboard/microtech/Kconfig.name b/src/mainboard/microtech/Kconfig.name new file mode 100644 index 0000000..bc37123 --- /dev/null +++ b/src/mainboard/microtech/Kconfig.name @@ -0,0 +1,2 @@ +config VENDOR_MICROTECH + bool "MICROTECH" diff --git a/src/mainboard/microtech/etabpro/Kconfig b/src/mainboard/microtech/etabpro/Kconfig new file mode 100644 index 0000000..6c91dff --- /dev/null +++ b/src/mainboard/microtech/etabpro/Kconfig @@ -0,0 +1,66 @@ +if BOARD_MICROTECH_ETABPRO + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select SOC_INTEL_GLK + select BOARD_ROMSIZE_KB_8192 + select DRIVERS_I2C_GENERIC + select DRIVERS_I2C_HID + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_LPSS_UART_FOR_CONSOLE + select MAINBOARD_HAS_LPC_TPM +# Blobs +# select NEED_IFWI +# select HAVE_IFD_BIN +# config for GLK INTEL_EC +# Not sure is VBOOT_NO_BOARD_SUPPORT is needed to work coreboot on GLK. Without it we got error if I choose GLK INTEL_EC... + select EC_ACPI +# select VBOOT_NO_BOARD_SUPPORT + + +config IFWI_FILE + string + default "3rdparty/blobs/mainboard/microtech/etabpro/ifwi.bin" + +config IFD_BIN_PATH + string + default "3rdparty/blobs/mainboard/microtech/etabpro/ifd.bin" + +config BASEBOARD_GLKRVP_LAPTOP + def_bool y + select SYSTEM_TYPE_LAPTOP + +#config VBOOT +# select HAS_RECOVERY_MRC_CACHE +# select MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN + +config FMDFILE + string + default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/etab.fmd" + +config MAINBOARD_DIR + string + default "microtech/etabpro" + +config MAINBOARD_PART_NUMBER + string + default "etabpro" + +config MAINBOARD_FAMILY + string + default "Intel_GLK" + +config MAX_CPUS + int + default 2 + +config UART_FOR_CONSOLE + int + default 2 + +config SOC_INTEL_COMMON_BLOCK_SGX_ENABLE + bool + default y + +endif # BOARD_MICROTECH_ETABPRO diff --git a/src/mainboard/microtech/etabpro/Kconfig.name b/src/mainboard/microtech/etabpro/Kconfig.name new file mode 100644 index 0000000..ab1d1e7 --- /dev/null +++ b/src/mainboard/microtech/etabpro/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_MICROTECH_ETABPRO + bool "etabpro" diff --git a/src/mainboard/microtech/etabpro/Makefile.inc b/src/mainboard/microtech/etabpro/Makefile.inc new file mode 100644 index 0000000..3fafe9c --- /dev/null +++ b/src/mainboard/microtech/etabpro/Makefile.inc @@ -0,0 +1,10 @@ +bootblock-y += bootblock.c + +ramstage-y += mainboard.c + +bootblock-y += gpio.c +romstage-y += memory.c +ramstage-y += gpio.c + +smm-y += gpio.c + diff --git a/src/mainboard/microtech/etabpro/board_info.txt b/src/mainboard/microtech/etabpro/board_info.txt new file mode 100644 index 0000000..983b2df --- /dev/null +++ b/src/mainboard/microtech/etabpro/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Microtech +Board name: etabpro glk board 8 MB bios rom +Category: laptop +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/microtech/etabpro/bootblock.c b/src/mainboard/microtech/etabpro/bootblock.c new file mode 100644 index 0000000..f0a641c --- /dev/null +++ b/src/mainboard/microtech/etabpro/bootblock.c @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "variants.h" +#include <bootblock_common.h> +#include <intelblocks/lpc_lib.h> +#include <soc/gpio.h> + +void bootblock_mainboard_init(void) +{ + const struct pad_config *pads; + size_t num; + + lpc_configure_pads(); + pads = variant_early_gpio_table(&num); + gpio_configure_pads(pads, num); +} diff --git a/src/mainboard/microtech/etabpro/devicetree.cb b/src/mainboard/microtech/etabpro/devicetree.cb new file mode 100644 index 0000000..e132f14 --- /dev/null +++ b/src/mainboard/microtech/etabpro/devicetree.cb @@ -0,0 +1,285 @@ +chip soc/intel/apollolake + device cpu_cluster 0 on + device lapic 0 on end + end + + register "pcie_rp_clkreq_pin[2]" = "3" # wifi/bt + # Disable unused clkreq of PCIe root ports + register "pcie_rp_clkreq_pin[0]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED" + + # Set de-emphasis to disabled for PCIE WiFI (Thunderpeak) + # as it is required for detection + register "pcie_rp_deemphasis_enable[2]" = "0" + # Set de-emphasis to default (enabled) for remaining ports + register "pcie_rp_deemphasis_enable[0]" = "1" + register "pcie_rp_deemphasis_enable[1]" = "1" + register "pcie_rp_deemphasis_enable[3]" = "1" + register "pcie_rp_deemphasis_enable[4]" = "1" + register "pcie_rp_deemphasis_enable[5]" = "1" + + # GPIO for PERST_0 (WLAN_PE_RST) + register "prt0_gpio" = "GPIO_164" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route, i.e., if this route changes then the affected GPE + # offset bits also need to be changed. This sets the PMC register + # GPE_CFG fields. + # DW1 is used by: + # - GPIO_63 - H1_PCH_INT_ODL + # DW2 is used by: + # - GPIO_141 - EC_PCH_WAKE_ODL + # - GPIO_142 - TRACKPAD_INT2_1V8_ODL + # - GPIO_144 - PEN_EJECT_ODL + # DW3 is used by: + # - GPIO_117 - LTE_WAKE_ODL + # - GPIO_119 - WLAN_PCIE_WAKE_ODL + register "gpe0_dw1" = "PMC_GPE_NW_63_32" + register "gpe0_dw2" = "PMC_GPE_N_95_64" + register "gpe0_dw3" = "PMC_GPE_N_63_32" + + # PL1 override 10000 mW: Due to error in the energy calculation for + # current VR solution. Experiments show that SoC TDP max (6W) can + # be reached when RAPL PL1 is set to 10W. + register "tdp_pl1_override_mw" = "10000" + # Set RAPL PL2 to 15W. + register "tdp_pl2_override_mw" = "15000" + + # Minimum SLP S3 assertion width 28ms. + register "slp_s3_assertion_width_usecs" = "28000" + + # Enable lpss s0ix + register "lpss_s0ix_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # Enable Audio Clock and Power gating + register "hdaudio_clk_gate_enable" = "1" + register "hdaudio_pwr_gate_enable" = "1" + register "hdaudio_bios_config_lockdown" = "1" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Digitizer | + #| I2C5 | Audio | + #| I2C6 | Trackpad | + #| I2C7 | Touchscreen | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[6] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 114, + .fall_time_ns = 164, + .data_hold_time_ns = 350, + }, + .i2c[7] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }, + }" + + register "pnp_settings" = "PNP_PERF_POWER" + + device domain 0 on + device pci 00.0 on end # - Host Bridge + device pci 00.1 on end # - DPTF + device pci 00.2 off end # - NPK + device pci 02.0 off end # - Gen + device pci 03.0 off end # - Iunit + chip drivers/intel/wifi + register "wake" = "GPE0A_CNVI_PME_STS" + device pci 0c.0 on end # - CNVi + end + device pci 0d.0 off end # - P2SB + device pci 0d.1 off end # - PMC + device pci 0d.2 off end # - Fast SPI + device pci 0d.3 off end # - Shared SRAM + device pci 0e.0 on + chip drivers/generic/max98357a + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_91)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # - Audio + device pci 0f.0 on end # - Heci1 + device pci 0f.1 off end # - Heci2 + device pci 0f.2 off end # - Heci3 + device pci 11.0 off end # - ISH + device pci 12.0 on end # - SATA + device pci 13.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_DW3_11" + device pci 00.0 on end + end + end # - PCIe-A 0 Onboard M2 Slot(Wifi) + device pci 13.1 on end # - PCIe-A 1 + device pci 13.2 on end # - PCIe-A 2 + device pci 13.3 off end # - PCIe-A 3 + device pci 14.0 off end # - PCIe-B 0 + device pci 14.1 off end # - PCIe-B 1 + device pci 15.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_109)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""SDCard"" + register "type" = "UPC_TYPE_EXPRESSCARD" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""User Facing Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""World Facing Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.7 on end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_109)" + device usb 2.8 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""SDCard"" + register "type" = "UPC_TYPE_EXPRESSCARD" + device usb 3.5 on end + end + end + end + end # - XHCI + device pci 15.1 off end # - XDCI + device pci 16.0 on end # - I2C 0 + device pci 16.1 on end # - I2C 1 + device pci 16.2 on end # - I2C 2 + device pci 16.3 on end # - I2C 3 + device pci 17.0 on end # - I2C 4 + device pci 17.1 on end # - I2C 5 + device pci 17.2 on end # - I2C 6 + device pci 17.3 on end # - I2C 7 + device pci 18.0 on end # - UART 0 + device pci 18.1 on end # - UART 1 + device pci 18.2 on end # - UART 2 + device pci 18.3 on end # - UART 3 + device pci 19.0 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_63_IRQ)" + device spi 0 on end + end + end # - GSPI 0 + device pci 19.1 on end # - SPI 1 + device pci 19.2 on end # - SPI 2 + device pci 1a.0 off end # - PWM + device pci 1c.0 on end # - eMMC + device pci 1e.0 on end # - SDIO + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # - ESPI + device pci 1f.1 on end # - SMBUS + end + + # FSP provides UPD interface to execute IPC command. PMIC has + # I2C_Slave_Address (31:24): 0x5E, Register_Offset (23:16): 0x43, + # RegOrValue (15:8): 0x2 and RegAndValue (7:0) 0xF8. + # The register is defined as: D[7:3] RSVD, D[2:0] PWROKDELAY. + # uint8 RegOrValue, RegAndValue, PmicReadReg + # RegOrValue = (UINT8)((PmicPmcIpcCtrl >> 8) & 0Xff); + # RegAndValue = (UINT8)(PmicPmcIpcCtrl & 0Xff); + # PmicReadReg &= RegAndValue; + # PmicReadReg |= RegOrValue; + # PmicReadReg value will be programmed into PMIC D[2:0] PWROKDELAY field + # and D[7:3] RSVD will not be impacted. + + # Configure PmicPmcIpcCtrl for PMC to program PMIC PCH_PWROK delay + # from 100ms to 10ms. + # PWROKDELAY[2:0]: 000=2.5ms, 001=5.0ms, 010=10ms, 011=15ms, 100=20ms, + # 101=50ms, 110=75ms, 111=100ms (default) + register "PmicPmcIpcCtrl" = "0x5e4302f8" +end diff --git a/src/mainboard/microtech/etabpro/dptf.asl b/src/mainboard/microtech/etabpro/dptf.asl new file mode 100644 index 0000000..f61f0b6 --- /dev/null +++ b/src/mainboard/microtech/etabpro/dptf.asl @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 80 +#define DPTF_CPU_CRITICAL 90 + +#define DPTF_TSR0_SENSOR_ID 0 +#define DPTF_TSR0_SENSOR_NAME "Battery" +#define DPTF_TSR0_PASSIVE 48 +#define DPTF_TSR0_CRITICAL 70 + +#define DPTF_TSR1_SENSOR_ID 1 +#define DPTF_TSR1_SENSOR_NAME "Ambient" +#define DPTF_TSR1_PASSIVE 60 +#define DPTF_TSR1_CRITICAL 70 + +#define DPTF_TSR2_SENSOR_ID 2 +#define DPTF_TSR2_SENSOR_NAME "Charger" +#define DPTF_TSR2_PASSIVE 55 +#define DPTF_TSR2_CRITICAL 100 + +#define DPTF_ENABLE_CHARGER + +/* Charger performance states, board-specific values from charger and EC */ +Name (CHPS, Package () { + Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 }, /* 3A (MAX) */ + Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ + Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ + Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ + Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 }, /* 0.0A */ +}) + +Name (DTRT, Package () { + /* CPU Throttle Effect on CPU */ + Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 0 */ + Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 }, + +#ifdef DPTF_ENABLE_CHARGER + /* Charger Effect on Temp Sensor 1 */ + Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 }, +#endif + + /* CPU Effect on Temp Sensor 1 */ + Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 100, 600, 0, 0, 0, 0 }, + + /* CPU Effect on Temp Sensor 2 */ + Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 100, 600, 0, 0, 0, 0 }, +}) + +Name (MPPC, Package () +{ + 0x2, /* Revision */ + Package () { /* Power Limit 1 */ + 0, /* PowerLimitIndex, 0 for Power Limit 1 */ + 1600, /* PowerLimitMinimum */ + 12000, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 200 /* StepSize */ + }, + Package () { /* Power Limit 2 */ + 1, /* PowerLimitIndex, 1 for Power Limit 2 */ + 6000, /* PowerLimitMinimum */ + 8000, /* PowerLimitMaximum */ + 1000, /* TimeWindowMinimum */ + 1000, /* TimeWindowMaximum */ + 1000 /* StepSize */ + } +}) diff --git a/src/mainboard/microtech/etabpro/dsdt.asl b/src/mainboard/microtech/etabpro/dsdt.asl new file mode 100644 index 0000000..89a1ac8 --- /dev/null +++ b/src/mainboard/microtech/etabpro/dsdt.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "gpio.h" + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 // OEM revision +) +{ + /* global NVS and variables */ + #include <soc/intel/apollolake/acpi/globalnvs.asl> + #include <cpu/intel/common/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <soc/intel/apollolake/acpi/northbridge.asl> + #include <soc/intel/apollolake/acpi/southbridge.asl> + #include <soc/intel/apollolake/acpi/pch_hda.asl> + } + } + + /* Dynamic Platform Thermal Framework */ + Scope (\_SB) + { + /* Per board variant specific definitions. */ +// #include "dptf.asl" + /* Include soc specific DPTF changes */ +// #include <soc/intel/apollolake/acpi/dptf.asl> + /* Include common dptf ASL files */ +// #include <soc/intel/common/acpi/dptf/dptf.asl> + } +} diff --git a/src/mainboard/microtech/etabpro/etab.fmd b/src/mainboard/microtech/etabpro/etab.fmd new file mode 100644 index 0000000..c71088a --- /dev/null +++ b/src/mainboard/microtech/etabpro/etab.fmd @@ -0,0 +1,35 @@ +FLASH 8M { + SI_DESC 0x1000 + SI_BIOS { + IFWI 0x2ff000 + OBBP { + FMAP 0x1000 + RO_FRID 0x40 + GBB 0x40000 + UNIFIED_MRC_CACHE 0x21000 { + RECOVERY_MRC_CACHE 0x10000 + RW_MRC_CACHE 0x10000 + RW_VAR_MRC_CACHE 0x1000 + } + CONSOLE 0x20000 + COREBOOT(CBFS) + SIGN_CSE 0x2000 + BIOS_UNUSABLE 0x4000 + } + } + RW_SECTION_A 0x70100 { + VBLOCK_A 0x10000 + FW_MAIN_A(CBFS) 0x60000 + RW_FWID_A 0x100 + } + RW_SECTION_B 0x70100 { + VBLOCK_B 0x10000 + FW_MAIN_B(CBFS) 0x60000 + RW_FWID_B 0x100 + } + SI_DEVICEEXT 0x101000 { + DEVICE_EXTENSION 0x100000 + UNUSED_HOLE 0x1000 + } +} + diff --git a/src/mainboard/microtech/etabpro/gpio.c b/src/mainboard/microtech/etabpro/gpio.c new file mode 100644 index 0000000..71c0d16 --- /dev/null +++ b/src/mainboard/microtech/etabpro/gpio.c @@ -0,0 +1,286 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ +#include "variants.h" +#include <gpio.h> +#include <commonlib/helpers.h> + +/* + * Pad configuration in ramstage. The order largely follows the 'GPIO Muxing' + * table found in EDS vol 1, but some pins aren't grouped functionally in + * the table so those were moved for more logical grouping. + */ +static const struct pad_config gpio_table[] = { +/* NORTHWEST COMMUNITY GPIOS */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_0, DN_20K, DEEP, NF1, IGNORE, ENPD), /* TCK */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_1, DN_20K, DEEP, NF1, IGNORE, ENPD), /* TRST_B */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_2, UP_20K, DEEP, NF1, IGNORE, ENPU), /* TMS */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_3, UP_20K, DEEP, NF1, IGNORE, ENPU), /* TDI */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_4, UP_20K, DEEP, NF1, IGNORE, ENPU), /* TDO */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_5, UP_20K, DEEP, NF1, IGNORE, ENPU), /* JTAGX */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_6, UP_20K, DEEP, NF1, IGNORE, ENPU), /* CX_PREQ_B */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_7, UP_20K, DEEP, NF1, IGNORE, ENPU), /* CX_PRDY_B */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_8, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_CLK_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_9, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA0_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_10, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA1_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_11, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA2_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_12, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA3_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_13, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA4_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_14, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA5_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_15, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA6_VNN */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_16, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA7_VNN */ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_17, 1, DEEP, UP_20K, TxDRxE, SAME),/*Ec-to-SOC CS Wake */ + PAD_CFG_GPI_APIC_IOS(GPIO_18, UP_20K, DEEP, LEVEL, NONE, IGNORE, SAME),/* Touch Pad Interrupt */ + PAD_CFG_GPI_APIC_IOS(GPIO_19, UP_20K, DEEP, EDGE_SINGLE, NONE, TxDRxE, SAME),/*PMIC Interrupt*/ + PAD_CFG_GPI_APIC_IOS(GPIO_20, UP_20K, DEEP, LEVEL, INVERT, IGNORE, SAME),/* Audio Codec Interrupt*/ + PAD_CFG_NF(GPIO_21, UP_20K, DEEP, NF2), /* CNV_MFUART2_RXD */ + PAD_CFG_NF_IOSSTATE(GPIO_22, UP_20K, DEEP, NF2, TxDRxE), /* CNV_MFUART2_TXD */ + PAD_CFG_NF(GPIO_23, UP_20K, DEEP, NF2), /* CNV_GNSS_PABLANKIt */ + PAD_CFG_GPO_GPIO_DRIVER(GPIO_24, 1, DEEP, DN_20K), + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_25, 1, DEEP, UP_20K, TxLASTRxE, SAME),/*WWAN /RF_KILL_GPS*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_26, UP_20K, DEEP, NF2, HIZCRx1, DISPUPD),/* NFC Interrupt */ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_27, 1, DEEP, NONE, IGNORE, DISPUPD),/* RF_KILL_WiFi/WiFi_Disable */ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_28, 1, DEEP, UP_20K, TxLASTRxE, DISPUPD),/* RF_KILL_BT/BT_Disable */ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_29, 1, DEEP, UP_20K, HIZCRx0, DISPUPD),/* Codec Power Down: Output/ISH_GPIO_3*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_30, DN_20K, DEEP, NF1), /* ISH_GPIO_4 */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_31, DN_20K, DEEP, NF1), /* ISH_GPIO_5 */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_32, DN_20K, DEEP, NF1), /* ISH_GPIO_6 */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_33, DN_20K, DEEP, NF1), /* ISH_GPIO_7 */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_34, DN_20K, DEEP, NF1), /* ISH_GPIO_8/SUSCLK2 (1.8V) */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_35, UP_20K, DEEP, NF6), /* BSSB_CLK */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_36, UP_20K, DEEP, NF6), /* BSSB_DI */ + PAD_CFG_GPI_SCI_IOS(GPIO_37, UP_20K, DEEP, EDGE_SINGLE, INVERT, IGNORE, SAME),/*Runtime SCI */ + PAD_CFG_GPI_SCI_IOS(GPIO_38, UP_20K, DEEP, EDGE_SINGLE, INVERT, IGNORE, SAME),/*Wake SCI */ + PAD_CFG_GPI_APIC_IOS(GPIO_39, DN_20K, DEEP, LEVEL, NONE, IGNORE, SAME),/* Finger Print Sensor Interrupt (DRDY) */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_40, UP_20K, DEEP, NF6),/*IERR (USB Camera Power Enable)*/ + PAD_CFG_GPI_SMI_IOS(GPIO_41, UP_20K, DEEP, EDGE_SINGLE, NONE, IGNORE, SAME),/*SOC_EXTSMI_N */ + PAD_CFG_NF(GPIO_42, DN_20K, DEEP, NF1), /* GP_INTD_DSI_TE1 */ + PAD_CFG_NF(GPIO_43, DN_20K, DEEP, NF1), /* GP_INTD_DSI_TE2 */ + PAD_CFG_NF(GPIO_44, UP_20K, DEEP, NF1), /* USB_OC0_B */ + PAD_CFG_NF(GPIO_45, UP_20K, DEEP, NF1), /* USB_OC1_B */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_46, UP_20K, DEEP, NF1, HIZCRx1, SAME), /* DSI_I2C_SDA */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_47, UP_20K, DEEP, NF1, HIZCRx1, ENPU), /* DSI_I2C_SCL */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_48, UP_1K, DEEP, NF1), /* PMC_I2C_SDA */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_49, UP_1K, DEEP, NF1), /* PMC_I2C_SCL */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_50, UP_2K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C0_SDA - Audio Codec*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_51, UP_2K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C0_SCL - Audio Codec */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_52, UP_20K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C1_SDA - NFC */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_53, UP_20K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C1_SCL - NFC */ + PAD_CFG_GPIO_DRIVER_HI_Z(GPIO_54, UP_20K, DEEP, HIZCRx1, ENPU),/*LPSS_I2C2_SDA*/ + PAD_CFG_GPIO_DRIVER_HI_Z(GPIO_55, UP_20K, DEEP, HIZCRx1, ENPU),/*LPSS_I2C2_SCL*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_56, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* I2C3-SDA - DBG (PSS, SINAI2, MIPI) */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_57, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*I2C3-SCL - DBG (PSS, SINAI2, MIPI) */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_58, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*I2C4-SDA - Touch Pad*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_59, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*I2C4-SCL - Touch Pad*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_60, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-RXD - M.2dGNSS */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_61, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-TXD - M.2dGNSS */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_62, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-RTS_B - M.2 dGNSS */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_63, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-CTS_B - M.2 dGNSS */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_64, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*LPSS_UART2_RXD*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_65, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD),/*LPSS_UART2_TXD*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_66, 1, DEEP, UP_20K, TxDRxE, DISPUPD),/*RF_KILL_WWAN */ +#if CONFIG(TPM_ON_FAST_SPI) + PAD_CFG_GPI_INT(GPIO_67, UP_20K, DEEP, LEVEL),/*SPI TPM Interrupt */ +#endif + PAD_CFG_NF(GPIO_68, UP_20K, DEEP, NF1),/*PMC_SPI_FS0*/ + PAD_CFG_GPI_APIC(GPIO_69, DN_20K, DEEP, EDGE_SINGLE, NONE),/*SIM Detect*/ + PAD_CFG_NF(GPIO_70, DN_20K, DEEP, NF1),/*PMC_SPI_FS2*/ + PAD_CFG_NF(GPIO_71, DN_20K, DEEP, NF1),/*PMC_SPI_RXD*/ + PAD_CFG_NF(GPIO_72, DN_20K, DEEP, NF1),/*PMC_SPI_TXD*/ + PAD_CFG_NF(GPIO_73, DN_20K, DEEP, NF1),/*PMC_SPI_CLK*/ + PAD_CFG_NF(GPIO_74, DN_20K, DEEP, NF1),/*THERMTRIP_B*/ + PAD_CFG_NF_IOSSTATE(GPIO_75, UP_20K, DEEP, NF1, HIZCRx1),/*PROCHOT_B*/ + PAD_CFG_NF_IOSSTATE(GPIO_211, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC_RST_B*/ + PAD_CFG_GPI_GPIO_DRIVER(GPIO_212, UP_20K, DEEP),/*Touch Panel Int*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_213, 1, DEEP, NONE, HIZCRx0, SAME),/*DNX LED - CSE owned*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_214, 1, DEEP, NONE, HIZCRx0, SAME),/*LAN Isolate*/ +/* NORTH COMMUNITY GPIOS */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_76, UP_20K, DEEP, NF1),/*SVID Alert*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_77, UP_20K, DEEP, NF1),/* SVID Data */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_78, UP_20K, DEEP, NF1),/* SVID Clk */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_79, NATIVE, DEEP, NF1),/* Finger Print Sensor */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_80, NATIVE, DEEP, NF1),/* Finger Print Sensor CS */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_81, NONE, DEEP, NF3),/* FST_SPI_CS2_B - TPM */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_82, NATIVE, DEEP, NF1),/* Finger Print Sensor */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_83, NATIVE, DEEP, NF1),/* Finger Print Sensor */ + PAD_CFG_NF_IOSSTATE(GPIO_84, NONE, DEEP, NF3, HIZCRx1),/* SPI iTouch*/ + PAD_CFG_NF_IOSSTATE(GPIO_85, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch CS*/ + PAD_CFG_NF_IOSSTATE(GPIO_86, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/ + PAD_CFG_NF_IOSSTATE(GPIO_87, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/ + PAD_CFG_NF_IOSSTATE(GPIO_88, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/ + PAD_CFG_NF_IOSSTATE(GPIO_89, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_90, NATIVE, DEEP, NF1),/*Function 1: FST SPI Boot Flash CS*/ + PAD_CFG_GPIO_HI_Z(GPIO_91, NATIVE, DEEP, IGNORE, SAME),/*FST_SPI_CS1_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_92, DN_20K, DEEP, NF1),/*FST_SPI_MOSI_IO0*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_93, NATIVE, DEEP, NF1),/*FST_SPI_MISO_IO1*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_94, NATIVE, DEEP, NF1),/*FST_SPI_IO2*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_95, NATIVE, DEEP, NF1),/*FST_SPI_IO3*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_96, NATIVE, DEEP, NF1),/*FST_SPI_CLK*/ + PAD_CFG_NF(GPIO_97, NATIVE, DEEP, NF1),/*FST_SPI_CLK_FB*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_98, NONE, DEEP, NF1),/*PMU_PLTRST_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_99, UP_20K, DEEP, NF1),/*PMU_PWRBTN_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_100, NONE, DEEP, NF1),/*PMU_SLP_S0_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_101, NONE, DEEP, NF1),/*PMU_SLP_S3_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_102, NONE, DEEP, NF1),/*PMU_SLP_S4_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_103, NONE, DEEP, NF1),/*SUSPWRDNACK*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_104, UP_20K, DEEP, NF1),/*EMMC_DNX_PWR_EN_B*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx0RxDCRx0, SAME),/*x4 Slot-2 Reset*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_106, UP_20K, DEEP, NF1),/*PMU_BATLOW_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_107, UP_20K, DEEP, NF1),/*PMU_RESETBUTTON_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_108, NONE, DEEP, NF1),/*PMU_SUSCLK*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_109, NONE, DEEP, NF1),/*SUS_STAT_B*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_110, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C5_SDA*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_111, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C5_SCL*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_112, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C6_SDA*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_113, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C6_SCL*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_114, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*LPSS_I2C7_SDA*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_115, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*LPSS_I2C7_SCL*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_116, UP_20K, DEEP, NF1),/*PCIE_WAKE0_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_117, UP_20K, DEEP, NF1),/*PCIE_WAKE1_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_118, UP_20K, DEEP, NF1),/*PCIE_WAKE2_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_119, UP_20K, DEEP, NF1),/*PCIE_WAKE3_B*/ + PAD_CFG_GPI(GPIO_120, UP_20K, DEEP), /* unused */ + PAD_CFG_GPI(GPIO_121, UP_20K, DEEP), /* unused */ + PAD_CFG_GPI(GPIO_122, UP_20K, DEEP), /* unused */ + PAD_CFG_NF_IOSSTATE(GPIO_123, UP_20K, DEEP, NF1, HIZCRx1),/*PCIE_CLKREQ3_B*/ + PAD_CFG_NF_IOSSTATE(GPIO_124, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI0_DDC_SDA*/ + PAD_CFG_NF_IOSSTATE(GPIO_125, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI0_DDC_SCL*/ + PAD_CFG_NF_IOSSTATE(GPIO_126, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI1_DDC_SDA*/ + PAD_CFG_NF_IOSSTATE(GPIO_127, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI1_DDC_SCL*/ + PAD_CFG_NF_IOSSTATE(GPIO_128, NONE, DEEP, NF1, Tx0RxDCRx0),/*PANEL0_VDDEN*/ + PAD_CFG_NF_IOSSTATE(GPIO_129, NONE, DEEP, NF1, Tx0RxDCRx0),/*PANEL0_BKLTEN*/ + PAD_CFG_NF_IOSSTATE(GPIO_130, NONE, DEEP, NF1, Tx0RxDCRx0),/*PANEL0_BKLTCTL*/ + PAD_CFG_NF_IOSSTATE(GPIO_131, UP_20K, DEEP, NF1, TxDRxE),/*HV_DDI0_HPD*/ + PAD_CFG_NF_IOSSTATE(GPIO_132, UP_20K, DEEP, NF1, TxDRxE),/*HV_DDI1_HPD*/ + PAD_CFG_NF_IOSSTATE(GPIO_133, UP_20K, DEEP, NF1, TxDRxE),/*HV_EDP_HPD*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_134, 1, DEEP, UP_20K, IGNORE, SAME),/*Slot-1 Power Enable*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_135, 1, DEEP, UP_20K, IGNORE, SAME),/*Slot-2 Power Enable*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_136, 1, DEEP, NONE, Tx0RxDCRx0, SAME),/*DGPU Power Select*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_137, 1, DEEP, UP_20K, IGNORE, SAME),/*slot-1 Reset*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_138, UP_20K, DEEP, NF2, HIZCRx1, DISPUPD),/*SATA_GP0 (DC RTD3 need)*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_139, UP_20K, DEEP, NF2, TxLASTRxE, DISPUPD),/*SATA_GP1 (ZPODD_DEV_DET)*/ + PAD_CFG_NF(GPIO_140, UP_20K, DEEP, NF5),/*SATA_DEVSLP0 (DC DEV SLP)*/ + PAD_CFG_NF_IOSSTATE(GPIO_141, UP_20K, DEEP, NF5, HIZCRx1),/*SATA_DEVSLP1 (ZPODD DEV ATN)*/ + PAD_CFG_NF_IOSSTATE(GPIO_142, UP_20K, DEEP, NF5, HIZCRx1),/*SATA_LED*/ + PAD_CFG_GPI_APIC_IOS(GPIO_143, NONE, DEEP, LEVEL, NONE, HIZCRx1, SAME),/*DGPU Power Ok*/ + PAD_CFG_NF_IOSSTATE(GPIO_144, UP_20K, DEEP, NF5, HIZCRx1),/*PANEL1_VDDEN*/ + PAD_CFG_NF_IOSSTATE(GPIO_145, UP_20K, DEEP, NF5, HIZCRx1),/*PANEL1_BKLTEN*/ + PAD_CFG_NF_IOSSTATE(GPIO_146, UP_20K, DEEP, NF5, HIZCRx1),/*PANEL1_BKLTCTL*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_157, 1, DEEP, UP_20K, IGNORE, SAME),/*WWAN_Reset/dGPS Reset*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_158, 0, DEEP, DN_20K, IGNORE, SAME),/*NFC_DFU*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_159, 1, DEEP, NONE, Tx0RxDCRx0, SAME),/*NFC reset*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_160, 0, DEEP, UP_20K, IGNORE, SAME),/*SD_MODE for spk*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_161, 1, DEEP, UP_20K, IGNORE, SAME),/*Touch panel reset*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_162, DN_20K, DEEP, NF1, HIZCRx1, SAME),/*AVS_I2S1_BCLK*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_163, DN_20K, DEEP, NF1, HIZCRx1, SAME),/*AVS_I2S1_WS_SYNC*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_164, 1, DEEP, NONE, Tx0RxDCRx0, SAME),/*Touch Panel Power Enable*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_165, DN_20K, DEEP, NF1, HIZCRx1, SAME),/*AVS_I2S1_SDO*/ + +/* AUDIO COMMUNITY GPIOS*/ + + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_166, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S2_BCLK*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_167, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S2_WS_SYNC*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_168, DN_20K, DEEP, NF2, HIZCRx1, SAME),/* AVS_I2S2_SDI*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_169, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S2_SD0*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_170, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S1_MCLK*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_171, DN_20K, DEEP, NF1),/*AVS_M_CLK_A1*/ + PAD_CFG_NF_IOSSTATE(GPIO_172, DN_20K, DEEP, NF1, HIZCRx1),/*AVS_M_CLK_B1*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_173, DN_20K, DEEP, NF1),/*AVS_M_DATA_1*/ + PAD_CFG_NF_IOSSTATE(GPIO_174, DN_20K, DEEP, NF1, HIZCRx1),/*AVS_M_CLK_AB2*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_175, DN_20K, DEEP, NF1, HIZCRx1, ENPD),/*AVS_M_DATA_2*/ + +/* SCC COMMUNITY GPIOS */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_176, UP_20K, DEEP, NF1),/*SMB_ALERTB*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_177, UP_20K, DEEP, NF1),/*SMB_CLK*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_178, UP_20K, DEEP, NF1),/*SMB_DATA*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_187, DN_20K, DEEP, NF1),/*SDCARD_LVL_WP*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_179, DN_20K, DEEP, NF1, HIZCRx0, DISPUPD),/*SDCARD_CLK*/ + PAD_CFG_NF(GPIO_180, DN_20K, DEEP, NF1),/*SDCARD_CLK_FB*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_181, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D0*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_182, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D1*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_183, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D2*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_184, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D3*/ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_185, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_CMD*/ + PAD_CFG_NF(GPIO_186, NONE, DEEP, NF1),/*SDCARD_CD_B*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_188, 0, DEEP, NONE, TxDRxE, SAME),/*SD Card*/ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_210, 1, DEEP, UP_20K, HIZCRx0, DISPUPD), + PAD_CFG_NF_IOSSTATE(GPIO_189, DN_20K, DEEP, NF1, HIZCRx0),/*OSC_CLK_OUT_0*/ + PAD_CFG_NF_IOSSTATE(GPIO_190, DN_20K, DEEP, NF1, HIZCRx0),/*OSC_CLK_OUT_1*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_191, NONE, DEEP, NF1),/*CNV_BRI_DT*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_192, UP_20K, DEEP, NF1),/*CNV_BRI_RSP*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_193, NONE, DEEP, NF1),/*CNV_RGI_DT*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_194, UP_20K, DEEP, NF1),/*CNV_RGI_RSP*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_195, NONE, DEEP, NF1),/*CNV_RF_RESET_B*/ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_196, NONE, DEEP, NF1),/*XTAL_CLKREQ*/ + PAD_CFG_NF(GPIO_197, DN_20K, DEEP, NF1),/*SDIO_CLK_FB*/ + PAD_CFG_NF_IOSSTATE(GPIO_198, DN_20K, DEEP, NF1, HIZCRx0),/*EMMC0_CLK*/ + PAD_CFG_NF(GPIO_199, DN_20K, DEEP, NF1),/*EMMC0_CLK_FB*/ + PAD_CFG_NF_IOSSTATE(GPIO_200, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D0*/ + PAD_CFG_NF_IOSSTATE(GPIO_201, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D1*/ + PAD_CFG_NF_IOSSTATE(GPIO_202, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D2*/ + PAD_CFG_NF_IOSSTATE(GPIO_203, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D3*/ + PAD_CFG_NF_IOSSTATE(GPIO_204, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D4*/ + PAD_CFG_NF_IOSSTATE(GPIO_205, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D5*/ + PAD_CFG_NF_IOSSTATE(GPIO_206, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D6*/ + PAD_CFG_NF_IOSSTATE(GPIO_207, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D7*/ + PAD_CFG_NF_IOSSTATE(GPIO_208, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_CMD*/ + PAD_CFG_NF_IOSSTATE(GPIO_209, DN_20K, DEEP, NF1, HIZCRx0),/*EMMC0_STROBE*/ +}; + +const struct pad_config * __weak variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +/* GPIOs needed prior to ramstage. */ +static const struct pad_config early_gpio_table[] = { + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_177, UP_20K, DEEP, NF1), /* SMB_CLK */ + PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_178, UP_20K, DEEP, NF1), /* SMB_DATA */ +}; + +const struct pad_config * __weak +variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +/* GPIO settings before entering sleep. */ +static const struct pad_config sleep_gpio_table[] = { +#if 0 + PAD_CFG_GPO(GPIO_150, 0, DEEP), /* NFC_RESET_ODL */ + PAD_CFG_GPI_APIC_LOW(GPIO_20, NONE, DEEP), /* NFC_INT_L */ +#endif +}; + +const struct pad_config * __weak +variant_sleep_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(sleep_gpio_table); + return sleep_gpio_table; +} + +static const struct cros_gpio cros_gpios[] = { +#if 0 + CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), + CROS_GPIO_WP_AH(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), +#endif +}; + +const struct cros_gpio * __weak variant_cros_gpios(size_t *num) +{ + *num = ARRAY_SIZE(cros_gpios); + return cros_gpios; +} diff --git a/src/mainboard/microtech/etabpro/gpio.h b/src/mainboard/microtech/etabpro/gpio.h new file mode 100644 index 0000000..170e87c --- /dev/null +++ b/src/mainboard/microtech/etabpro/gpio.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef BASEBOARD_GPIO_H +#define BASEBOARD_GPIO_H + +#include <soc/gpio.h> + +/* + * GPIO_11 for SCI is routed to GPE0_DW1 and maps to group GPIO_GPE_N_31_0 + * which is North community + */ +#if CONFIG(SOC_ESPI) +#define EC_SCI_GPI GPE0A_ESPI_SCI_STS +#else +#define EC_SCI_GPI GPE0_DW1_05 +#endif + +/* EC SMI */ +#define EC_SMI_GPI GPIO_41 + +#define GPE_EC_WAKE GPE0_DW1_06 + +/* Memory SKU GPIOs. */ +#define MEM_CONFIG3 GPIO_45 +#define MEM_CONFIG2 GPIO_38 +#define MEM_CONFIG1 GPIO_102 +#define MEM_CONFIG0 GPIO_101 + +#endif /* BASEBOARD_GPIO_H */ diff --git a/src/mainboard/microtech/etabpro/mainboard.c b/src/mainboard/microtech/etabpro/mainboard.c new file mode 100644 index 0000000..15e81a9 --- /dev/null +++ b/src/mainboard/microtech/etabpro/mainboard.c @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <arch/acpi.h> +#include "variants.h" +#include <console/console.h> +#include <device/device.h> +#include <ec/ec.h> +#include <nhlt.h> +#include <soc/gpio.h> +#include <soc/nhlt.h> +#include "gpio.h" + +static void mainboard_init(void *chip_info) +{ + const struct pad_config *pads; + size_t num; + + pads = variant_gpio_table(&num); + gpio_configure_pads(pads, num); + +// mainboard_ec_init(); +} + +static unsigned long mainboard_write_acpi_tables( + struct device *device, unsigned long current, acpi_rsdp_t *rsdp) +{ + uintptr_t start_addr; + uintptr_t end_addr; + struct nhlt *nhlt; + + start_addr = current; + + nhlt = nhlt_init(); + + if (nhlt == NULL) + return start_addr; + +// variant_nhlt_init(nhlt); + + end_addr = nhlt_soc_serialize(nhlt, start_addr); + + if (end_addr != start_addr) + acpi_add_table(rsdp, (void *)start_addr); + + return end_addr; +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->write_acpi_tables = mainboard_write_acpi_tables; + dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator; +} + +struct chip_operations mainboard_ops = { + .init = mainboard_init, + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/microtech/etabpro/memory.c b/src/mainboard/microtech/etabpro/memory.c new file mode 100644 index 0000000..2a4c43e --- /dev/null +++ b/src/mainboard/microtech/etabpro/memory.c @@ -0,0 +1,143 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include "variants.h" +#include <gpio.h> +#include <soc/meminit.h> +#include "gpio.h" + +const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle = { + /* CH0_DQA[0:31] SoC pins -> U22 LPDDR4 module pins */ + .phys[LP4_PHYS_CH0A] = { + /* DQA[0:7] pins of LPDDR4 module. */ + .dqs[LP4_DQS0] = { 6, 7, 5, 4, 3, 1, 0, 2 }, + /* DQA[8:15] pins of LPDDR4 module. */ + .dqs[LP4_DQS1] = { 12, 10, 11, 13, 14, 8, 9, 15 }, + /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS2] = { 16, 22, 23, 20, 18, 17, 19, 21 }, + /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS3] = { 30, 28, 29, 25, 24, 26, 27, 31 }, + }, + .phys[LP4_PHYS_CH0B] = { + /* DQA[0:7] pins of LPDDR4 module. */ + .dqs[LP4_DQS0] = { 7, 3, 5, 2, 6, 0, 1, 4 }, + /* DQA[8:15] pins of LPDDR4 module. */ + .dqs[LP4_DQS1] = { 9, 14, 12, 13, 10, 11, 8, 15 }, + /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS2] = { 20, 22, 23, 16, 19, 17, 18, 21 }, + /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS3] = { 28, 24, 26, 27, 29, 30, 31, 25 }, + }, + .phys[LP4_PHYS_CH1A] = { + /* DQA[0:7] pins of LPDDR4 module. */ + .dqs[LP4_DQS0] = { 2, 1, 6, 7, 5, 4, 3, 0 }, + /* DQA[8:15] pins of LPDDR4 module. */ + .dqs[LP4_DQS1] = { 11, 10, 8, 9, 12, 15, 13, 14 }, + /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS2] = { 17, 23, 19, 16, 21, 22, 20, 18 }, + /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS3] = { 31, 29, 26, 25, 28, 27, 24, 30 }, + }, + .phys[LP4_PHYS_CH1B] = { + /* DQA[0:7] pins of LPDDR4 module. */ + .dqs[LP4_DQS0] = { 4, 3, 7, 5, 6, 1, 0, 2 }, + /* DQA[8:15] pins of LPDDR4 module. */ + .dqs[LP4_DQS1] = { 15, 9, 8, 11, 14, 13, 12, 10 }, + /* DQB[0:7] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS2] = { 20, 23, 22, 21, 18, 19, 16, 17 }, + /* DQB[7:15] pins of LPDDR4 module with offset of 16. */ + .dqs[LP4_DQS3] = { 25, 28, 30, 31, 26, 27, 24, 29 }, + }, +}; + +static const struct lpddr4_sku skus[] = { + /* + * K4F6E304HB-MGCJ - both logical channels While the parts + * are listed at 16Gb there are 2 ranks per channel so indicate + * the density as 8Gb per rank. + */ + [0] = { + .speed = LP4_SPEED_2400, + .ch0_rank_density = LP4_8Gb_DENSITY, + .ch1_rank_density = LP4_8Gb_DENSITY, + .ch0_dual_rank = 1, + .ch1_dual_rank = 1, + .part_num = "K4F6E304HB-MGCJ", + }, + /* K4F8E304HB-MGCJ - both logical channels */ + [1] = { + .speed = LP4_SPEED_2400, + .ch0_rank_density = LP4_8Gb_DENSITY, + .ch1_rank_density = LP4_8Gb_DENSITY, + .part_num = "K4F8E304HB-MGCJ", + }, + /* + * MT53B512M32D2NP-062WT:C - both logical channels. While the parts + * are listed at 16Gb there are 2 ranks per channel so indicate + * the density as 8Gb per rank. + */ + [2] = { + .speed = LP4_SPEED_2400, + .ch0_rank_density = LP4_8Gb_DENSITY, + .ch1_rank_density = LP4_8Gb_DENSITY, + .ch0_dual_rank = 1, + .ch1_dual_rank = 1, + .part_num = "MT53B512M32D2NP", + .disable_periodic_retraining = 1, + }, + /* MT53B256M32D1NP-062 WT:C - both logical channels */ + [3] = { + .speed = LP4_SPEED_2400, + .ch0_rank_density = LP4_8Gb_DENSITY, + .ch1_rank_density = LP4_8Gb_DENSITY, + .part_num = "MT53B256M32D1NP", + .disable_periodic_retraining = 1, + }, + /* + * H9HCNNNBPUMLHR-NLE - both logical channels. While the parts + * are listed at 16Gb there are 2 ranks per channel so indicate the + * density as 8Gb per rank. + */ + [4] = { + .speed = LP4_SPEED_2400, + .ch0_rank_density = LP4_8Gb_DENSITY, + .ch1_rank_density = LP4_8Gb_DENSITY, + .ch0_dual_rank = 1, + .ch1_dual_rank = 1, + .part_num = "H9HCNNNBPUMLHR", + }, + /* H9HCNNN8KUMLHR-NLE - both logical channels */ + [5] = { + .speed = LP4_SPEED_2400, + .ch0_rank_density = LP4_8Gb_DENSITY, + .ch1_rank_density = LP4_8Gb_DENSITY, + .part_num = "H9HCNNN8KUMLHR", + }, +}; + +static const struct lpddr4_cfg lp4cfg = { + .skus = skus, + .num_skus = ARRAY_SIZE(skus), + .swizzle_config = &baseboard_lpddr4_swizzle, +}; + +const struct lpddr4_cfg * __weak variant_lpddr4_config(void) +{ + return &lp4cfg; +} + +size_t __weak variant_memory_sku(void) +{ + return 0; +} diff --git a/src/mainboard/microtech/etabpro/romstage.c b/src/mainboard/microtech/etabpro/romstage.c new file mode 100644 index 0000000..2c42ee6 --- /dev/null +++ b/src/mainboard/microtech/etabpro/romstage.c @@ -0,0 +1,238 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include "variants.h" +#include <string.h> +#include <soc/meminit.h> +#include <soc/romstage.h> + +#define BOARD_ID_GLK_RVP1_DDR4 0x5 /* GLK RVP1 - DDR4 */ +#define BOARD_ID_GLK_RVP2_LP4SD 0x7 /* GLK RVP2 - LP4 Solder Down */ +#define BOARD_ID_GLK_RVP2_LP4 0x8 /* RVP2 - LP4 Socket */ + +/* DDR4 specific swizzling data start */ + +/* Channel 0 PHY 0 to DUnit DQ mapping */ +static const uint8_t swizzling_ch0_ddr4[] = { + 15, 14, 10, 11, 8, 9, 13, 12, 2, 7, 3, 6, 4, 0, 1, 5, + 29, 31, 27, 26, 24, 28, 25, 30, 19, 22, 18, 21, 23, 16, 17, 20, +}; + +/* Channel 1 PHY 0 to DUnit DQ mapping */ +static const uint8_t swizzling_ch1_ddr4[] = { + 1, 0, 4, 5, 7, 2, 6, 3, 24, 25, 28, 30, 26, 27, 31, 29, + 21, 20, 17, 16, 23, 22, 19, 18, 8, 12, 11, 15, 10, 9, 13, 14, +}; + +/* Channel 1 PHY 1 to DUnit DQ mapping */ +static const uint8_t swizzling_ch2_ddr4[] = { + 14, 12, 9, 13, 10, 15, 11, 8, 1, 3, 7, 5, 2, 6, 0, 4, + 27, 24, 29, 28, 30, 26, 31, 25, 19, 20, 18, 22, 16, 21, 23, 17, +}; + +/* Channel 0 PHY 1 to DUnit DQ mapping */ +static const uint8_t swizzling_ch3_ddr4[] = { + 12, 8, 13, 9, 15, 11, 14, 10, 0, 5, 1, 4, 7, 2, 6, 3, + 20, 16, 21, 17, 19, 18, 22, 23, 29, 24, 28, 26, 25, 30, 31, 27 +}; +/* DDR4 specific swizzling data end*/ + +/* LPDD4 specific swizzling data start */ + +/* Channel 0 PHY 0 to DUnit DQ mapping */ +static const uint8_t swizzling_ch0_lpddr4[] = { + 10, 8, 12, 11, 9, 13, 14, 15, 1, 3, 2, 0, 5, 4, 6, 7, + 30, 26, 24, 25, 28, 29, 31, 27, 20, 21, 22, 16, 23, 17, 18, 19, +}; + +/* Channel 1 PHY 0 to DUnit DQ mapping */ +static const uint8_t swizzling_ch1_lpddr4[] = { + 0, 6, 7, 5, 3, 2, 1, 4, 12, 15, 13, 8, 9, 10, 11, 14, + 17, 18, 19, 16, 23, 20, 21, 22, 30, 31, 25, 27, 26, 29, 28, 24, +}; + +/* Channel 1 PHY 1 to DUnit DQ mapping */ +static const uint8_t swizzling_ch2_lpddr4[] = { + 15, 8, 11, 10, 14, 12, 13, 9, 5, 1, 0, 6, 2, 3, 7, 4, + 31, 25, 24, 27, 30, 29, 28, 26, 21, 18, 20, 23, 16, 17, 22, 19, +}; + +/* Channel 0 PHY 1 to DUnit DQ mapping */ +static const uint8_t swizzling_ch3_lpddr4[] = { + 15, 9, 8, 10, 13, 14, 12, 11, 7, 6, 5, 0, 4, 2, 1, 3, + 20, 21, 23, 22, 19, 17, 18, 16, 24, 27, 26, 30, 25, 31, 28, 29 +}; +/* LPDD4 specific swizzling data end */ + +static void fill_lpddr4_params(FSP_M_CONFIG *cfg) +{ + cfg->Package = 1; + cfg->MemoryDown = 1; + cfg->DDR3LPageSize = 0; + cfg->DDR3LASR = 0; + cfg->ScramblerSupport = 1; + cfg->ChannelHashMask = 0x36; + cfg->SliceHashMask = 0x9; + cfg->InterleavedMode = 2; + cfg->ChannelsSlicesEnable = 0; + cfg->MinRefRate2xEnable = 0; + cfg->DualRankSupportEnable = 0; + cfg->DisableFastBoot = 0; + cfg->RmtMode = 0; + cfg->RmtCheckRun = 0; + cfg->RmtMarginCheckScaleHighThreshold = 0; + cfg->MemorySizeLimit = 0; + cfg->LowMemoryMaxValue = 0; + cfg->HighMemoryMaxValue = 0; + cfg->Profile = 7; + cfg->DIMM0SPDAddress = 0x00; + cfg->DIMM1SPDAddress = 0x00; + cfg->Ch0_RankEnable = 0x1; + cfg->Ch0_DeviceWidth = 0x1; + cfg->Ch0_DramDensity = 0x2; + cfg->Ch0_Option = 0x3; + cfg->Ch0_TristateClk1 = 0; + cfg->Ch0_Mode2N = 0; + cfg->Ch0_OdtLevels = 0; + cfg->Ch1_RankEnable = 0x1; + cfg->Ch1_DeviceWidth = 0x1; + cfg->Ch1_DramDensity = 0x2; + cfg->Ch1_Option = 0x3; + cfg->Ch1_TristateClk1 = 0; + cfg->Ch1_Mode2N = 0; + cfg->Ch1_OdtLevels = 0; + cfg->Ch2_RankEnable = 0x1; + cfg->Ch2_DeviceWidth = 0x1; + cfg->Ch2_DramDensity = 0x2; + cfg->Ch2_Option = 0x3; + cfg->Ch2_TristateClk1 = 0; + cfg->Ch2_Mode2N = 0; + cfg->Ch2_OdtLevels = 0; + cfg->Ch3_RankEnable = 0x1; + cfg->Ch3_DeviceWidth = 0x1; + cfg->Ch3_DramDensity = 0x2; + cfg->Ch3_Option = 0x3; + cfg->Ch3_TristateClk1 = 0; + cfg->Ch3_Mode2N = 0; + cfg->Ch3_OdtLevels = 0; + /* phy0 ch0 */ + memcpy(cfg->Ch0_Bit_swizzling, swizzling_ch0_lpddr4, + sizeof(swizzling_ch0_lpddr4)); + /* phy0 ch1 */ + memcpy(cfg->Ch1_Bit_swizzling, swizzling_ch1_lpddr4, + sizeof(swizzling_ch1_lpddr4)); + /* phy1 ch1 */ + memcpy(cfg->Ch2_Bit_swizzling, swizzling_ch2_lpddr4, + sizeof(swizzling_ch2_lpddr4)); + /* phy1 ch0 */ + memcpy(cfg->Ch3_Bit_swizzling, swizzling_ch3_lpddr4, + sizeof(swizzling_ch3_lpddr4)); +} + +static void fill_ddr4_params(FSP_M_CONFIG *cfg) +{ + cfg->Package = 0; /* 0x1:BGA */ + cfg->MemoryDown = 0; + cfg->DDR3LPageSize = 1; + cfg->DDR3LASR = 0; + cfg->ScramblerSupport = 0; + cfg->ChannelHashMask = 0x36; + cfg->SliceHashMask = 0x9; + cfg->InterleavedMode = 0; + cfg->ChannelsSlicesEnable = 0; + cfg->MinRefRate2xEnable = 0; + cfg->DualRankSupportEnable = 1; + cfg->DisableFastBoot = 0; + cfg->RmtMode = 0; + cfg->RmtCheckRun = 0; + cfg->RmtMarginCheckScaleHighThreshold = 0; + cfg->MemorySizeLimit = 0; + cfg->LowMemoryMaxValue = 0; + cfg->HighMemoryMaxValue = 0; + cfg->Profile = 11; + cfg->DIMM0SPDAddress = 0xA0; + cfg->DIMM1SPDAddress = 0xA4; + cfg->Ch0_RankEnable = 0x3; + cfg->Ch0_DeviceWidth = 0x1; + cfg->Ch0_DramDensity = 0x0; + cfg->Ch0_Option = 0x3; /* Bank Address Hashing enabled */ + cfg->Ch0_TristateClk1 = 0; + cfg->Ch0_Mode2N = 0; + cfg->Ch0_OdtLevels = 0; + cfg->Ch1_RankEnable = 0x3; + cfg->Ch1_DeviceWidth = 0x1; + cfg->Ch1_DramDensity = 0x2; + cfg->Ch1_Option = 0x3; /* Bank Address Hashing enabled */ + cfg->Ch1_TristateClk1 = 0; + cfg->Ch1_Mode2N = 0; + cfg->Ch1_OdtLevels = 0; + cfg->Ch2_RankEnable = 0x0; + cfg->Ch2_DeviceWidth = 0x1; + cfg->Ch2_DramDensity = 0x2; + cfg->Ch2_Option = 0x3; /* Bank Address Hashing enabled */ + cfg->Ch2_TristateClk1 = 0; + cfg->Ch2_Mode2N = 0; + cfg->Ch2_OdtLevels = 0; + cfg->Ch3_RankEnable = 0x0; + cfg->Ch3_DeviceWidth = 0x1; + cfg->Ch3_DramDensity = 0x2; + cfg->Ch3_Option = 0x3; /* Bank Address Hashing enabled */ + cfg->Ch3_TristateClk1 = 0; + cfg->Ch3_Mode2N = 0; + cfg->Ch3_OdtLevels = 0; + + /* phy0 ch0 */ + memcpy(cfg->Ch0_Bit_swizzling, swizzling_ch0_ddr4, + sizeof(swizzling_ch0_ddr4)); + /* phy0 ch1 */ + memcpy(cfg->Ch1_Bit_swizzling, swizzling_ch1_ddr4, + sizeof(swizzling_ch1_ddr4)); + /* phy1 ch1 */ + memcpy(cfg->Ch2_Bit_swizzling, swizzling_ch2_ddr4, + sizeof(swizzling_ch2_ddr4)); + /* phy1 ch0 */ + memcpy(cfg->Ch3_Bit_swizzling, swizzling_ch3_ddr4, + sizeof(swizzling_ch3_ddr4)); +} + +static void fill_memory_params(FSP_M_CONFIG *cfg) +{ + uint8_t boardid; + + if (CONFIG(IS_GLK_RVP_1)) + boardid = BOARD_ID_GLK_RVP1_DDR4; + else + boardid = BOARD_ID_GLK_RVP2_LP4; + + switch (boardid) { + case BOARD_ID_GLK_RVP1_DDR4: + fill_ddr4_params(cfg); + break; + case BOARD_ID_GLK_RVP2_LP4SD: + case BOARD_ID_GLK_RVP2_LP4: + fill_lpddr4_params(cfg); + break; + } +} + +void mainboard_memory_init_params(FSPM_UPD *memupd) +{ + FSP_M_CONFIG *cfg = &memupd->FspmConfig; + fill_memory_params(cfg); +} + +void mainboard_save_dimm_info(void) +{ + save_lpddr4_dimm_info(variant_lpddr4_config(), variant_memory_sku()); +} diff --git a/src/mainboard/microtech/etabpro/touchpad.asl b/src/mainboard/microtech/etabpro/touchpad.asl new file mode 100644 index 0000000..6168fbb --- /dev/null +++ b/src/mainboard/microtech/etabpro/touchpad.asl @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + Scope (\_SB.PCI0.I2C4) + { + Device (TPAD) + { + Name(_ADR, One) + Name (_HID, "ALPS0001") + Name (_CID, "PNP0C50") + Name (_DDN, "ALPS Touchpad") + Name (_UID, 1) + Name (ISTP, 1) /* Touchpad */ + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x2C, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C4", // ResourceSource + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { + GPIO_18_IRQ + } + GpioInt (Level, ActiveLow, ExclusiveAndWake, PullUp, 0x0000, "\\_SB.GPO1", 0x00, ResourceConsumer, ,) + { + 18 + } + }) + + Method (_STA) + { + Return (0xF) + } + Method(_DSM, 0x4, NotSerialized) + { + // DSM UUID for HIDI2C - HID driver does not load without DSM + If(LEqual(Arg0, ToUUID("3CDFF6F7-4267-4555-AD05-B30A3D8938DE"))) + { + // Function 0 : Query Function + If(LEqual(Arg2, Zero)) + { + // Revision 1 + If(LEqual(Arg1, One)) + { + Return (Buffer (One) {0x03}) + } + Else + { + Return (Buffer (One) {0x00}) + } + } ElseIf (LEqual(Arg2, One)) { // Function 1 : HID Function + // HID Descriptor Address (IHV Specific) + Return(0x0020) + } Else { + Return (Buffer (One) {0x00}) + } + } Else { + Return (Buffer (One) {0x00}) + } + } + } +} diff --git a/src/mainboard/microtech/etabpro/touchpanel.asl b/src/mainboard/microtech/etabpro/touchpanel.asl new file mode 100644 index 0000000..225b891 --- /dev/null +++ b/src/mainboard/microtech/etabpro/touchpanel.asl @@ -0,0 +1,71 @@ + +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope(\_SB.PCI0.I2C7) { +// Touch Panels on I2C7 +// GPIO_212:TCH_PNL_INTR_LS_N North Community, IRQ number 0x75. +//------------------------ + Device (TPL1) { + Name (HID2, 1) + Name (_HID, "WCOM508E") // _HID: Hardware ID + Name (_CID, "PNP0C50") // _CID: Compatible ID + Name (_S0W, 0x04) // _S0W: S0 Device Wake State + Name (SBFB, ResourceTemplate () { + I2cSerialBus ( + 0x000A, + ControllerInitiated, + 1000000, + AddressingMode7Bit, + "\\_SB.PCI0.I2C7", + 0x00, + ResourceConsumer, + , + ) + }) + // + // GLK: Touchpanel Interrupt: GPIO_212: Northwest + // Pin 77 + // Direct IRQ 0x75 + // + Name (SBFG, ResourceTemplate () { + GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000, + "\\_SB.GPO0", 0x00, ResourceConsumer, , + ) + { + 77 + } + }) + Name (SBFI, ResourceTemplate () { + Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, ) + { + 0x75, + } + }) + + Method (_INI, 0, NotSerialized) // _INI: Initialize + { + } + + Method (_STA, 0, NotSerialized) // _STA: Status + { + Return (0x0F) + } + + Method (_CRS, 0, NotSerialized) { + Return (ConcatenateResTemplate(SBFB, SBFG)) + } + } // Device (TPL0) +} diff --git a/src/mainboard/microtech/etabpro/variants.h b/src/mainboard/microtech/etabpro/variants.h new file mode 100644 index 0000000..cf91a04 --- /dev/null +++ b/src/mainboard/microtech/etabpro/variants.h @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef BASEBOARD_VARIANTS_H +#define BASEBOARD_VARIANTS_H + +#include <soc/gpio.h> +#include <soc/meminit.h> +#include <stdint.h> +#include <vendorcode/google/chromeos/chromeos.h> + +/** + * variant_board_id() - Get the board id for the current board variant + * + * Return: board id on success, -1 on failure/error. + */ +int variant_board_id(void); + +/* The next set of functions return the gpio table and fill in the number of + * entries for each table. */ +const struct pad_config *variant_gpio_table(size_t *num); +const struct pad_config *variant_early_gpio_table(size_t *num); +const struct pad_config *variant_sleep_gpio_table(size_t *num); + +/* Baseboard default swizzle. Can be reused if swizzle is same. */ +extern const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle; +/* Return LPDDR4 configuration structure. */ +const struct lpddr4_cfg *variant_lpddr4_config(void); +/* Return memory SKU for the board. */ +size_t variant_memory_sku(void); + +/* Return ChromeOS gpio table and fill in number of entries. */ +const struct cros_gpio *variant_cros_gpios(size_t *num); + +/* Seed the NHLT tables with the board specific information. */ +struct nhlt; +void variant_nhlt_init(struct nhlt *nhlt); + +#endif /* BASEBOARD_VARIANTS_H */ -- To view, visit https://review.coreboot.org/c/coreboot/+/39277 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib9d755902f28b51823e16c228ee5d4fc13849798 Gerrit-Change-Number: 39277 Gerrit-PatchSet: 1 Gerrit-Owner: Miroslaw Kocur <mirek190(a)gmail.com> Gerrit-MessageType: newchange

5 7

Change in ...coreboot[master]: security/vboot: Add fmap measurements
by Philipp Deppenwiese (Code Review) 07 Aug '23

07 Aug '23

Philipp Deppenwiese has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31597 Change subject: security/vboot: Add fmap measurements ...................................................................... security/vboot: Add fmap measurements * Hook into fmap location * Add static measurements for IFD to the CRTM Change-Id: If7e4972805fbc8d19ab55d1f5e506836791c7bf0 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki(a)gmail.com> --- M src/lib/fmap.c M src/security/vboot/vboot_crtm.c M src/security/vboot/vboot_crtm.h 3 files changed, 76 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/97/31597/1 diff --git a/src/lib/fmap.c b/src/lib/fmap.c index 9602134..ae0aaf8 100644 --- a/src/lib/fmap.c +++ b/src/lib/fmap.c @@ -20,6 +20,7 @@ #include <commonlib/fmap_serialized.h> #include <stddef.h> #include <string.h> +#include <security/vboot/vboot_crtm.h> #include "fmap_config.h" @@ -77,7 +78,12 @@ if (fmap_locate_area(name, &ar)) return -1; - return boot_device_ro_subregion(&ar, area); + int ret = boot_device_ro_subregion(&ar, area); + if (!ret) + if (vboot_measure_fmap_hook(area, name)) + return -1; + + return ret; } int fmap_locate_area_as_rdev_rw(const char *name, struct region_device *area) @@ -87,7 +93,12 @@ if (fmap_locate_area(name, &ar)) return -1; - return boot_device_rw_subregion(&ar, area); + int ret = boot_device_rw_subregion(&ar, area); + if (!ret) + if (vboot_measure_fmap_hook(area, name)) + return -1; + + return ret; } int fmap_locate_area(const char *name, struct region *ar) diff --git a/src/security/vboot/vboot_crtm.c b/src/security/vboot/vboot_crtm.c index 1914f20..a474fd0 100644 --- a/src/security/vboot/vboot_crtm.c +++ b/src/security/vboot/vboot_crtm.c @@ -18,6 +18,16 @@ #include <security/vboot/vboot_crtm.h> #include <security/vboot/misc.h> +const static char *fmap_runtime_data[] = { + "UNIFIED_MRC_CACHE", + "RW_MRC_CACHE", + "RW_ELOG", + "RW_VPD", + "RW_NVRAM", + "RECOVERY_MRC_CACHE", + "RW_VAR_MRC_CACHE", + "SMMSTORE"}; + uint32_t vboot_init_crtm(void) { struct prog bootblock = PROG_INIT(PROG_BOOTBLOCK, "bootblock"); @@ -88,6 +98,36 @@ } } + /* IFD measurements */ + struct region_device fmap; + if (fmap_locate_area_as_rdev("RO_VPD", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Read-only VPD") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("GBB", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Google Binary Blob") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_DESC", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Intel Flash Descriptor") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_ME", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "Intel ME") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_EC", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "EC firmware") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_GBE", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_CRTM_PCR, "Intel GbE") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + + if (fmap_locate_area_as_rdev("SI_PDR", &fmap) == 0) + if (tpm_measure_region(&fmap, TPM_RUNTIME_DATA_PCR, "Platform Data") != TPM_SUCCESS) + return VB2_ERROR_UNKNOWN; + return VB2_SUCCESS; } @@ -142,3 +182,18 @@ return tpm_measure_region(&rdev, pcr_index, name); } + +uint32_t vboot_measure_fmap_hook(struct region_device *rdev, const char *name) +{ + int i; + + if (!vb2_logic_executed()) + return 0; + + for (i = 0; i < sizeof(fmap_runtime_data) / sizeof(fmap_runtime_data[0]); i++) { + if (!strncmp(fmap_runtime_data[i], name, sizeof(fmap_runtime_data[i]))) + return tpm_measure_region(rdev, TPM_RUNTIME_DATA_PCR, name); + } + + return 0; +} diff --git a/src/security/vboot/vboot_crtm.h b/src/security/vboot/vboot_crtm.h index d28e96e..259e486 100644 --- a/src/security/vboot/vboot_crtm.h +++ b/src/security/vboot/vboot_crtm.h @@ -54,8 +54,16 @@ */ uint32_t vboot_measure_cbfs_hook(struct cbfsf *fh, const char *name); +/* + * Measures fmap data via hook (fmap) + * rdev is the region device handle to measure + * return 0 if successful, else an error + */ +uint32_t vboot_measure_fmap_hook(struct region_device *rdev, const char *name); + #else #define vboot_measure_cbfs_hook(fh, name) 0 +#define vboot_measure_fmap_hook(rdev, name) 0 #endif #endif /* __VBOOT_VBOOT_CRTM_H__ */ -- To view, visit https://review.coreboot.org/c/coreboot/+/31597 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If7e4972805fbc8d19ab55d1f5e506836791c7bf0 Gerrit-Change-Number: 31597 Gerrit-PatchSet: 1 Gerrit-Owner: Philipp Deppenwiese <zaolin.daisuki(a)gmail.com> Gerrit-MessageType: newchange

8 66

Change in coreboot[master]: [TESTME]soc/intel/braswell: Attempt to skip FSP-T
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36263 ) Change subject: [TESTME]soc/intel/braswell: Attempt to skip FSP-T ...................................................................... [TESTME]soc/intel/braswell: Attempt to skip FSP-T Use native Cache as ram and make FSP-M not complain by faking FSP-T has ran. Change-Id: I15edf479b09bf9a87afb9ab27e09d4360d21b9ff Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/soc/intel/braswell/Kconfig M src/soc/intel/braswell/Makefile.inc M src/soc/intel/braswell/bootblock/bootblock.c 3 files changed, 91 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/36263/1 diff --git a/src/soc/intel/braswell/Kconfig b/src/soc/intel/braswell/Kconfig index 5d6438f..7750534 100644 --- a/src/soc/intel/braswell/Kconfig +++ b/src/soc/intel/braswell/Kconfig @@ -39,7 +39,9 @@ select TSC_MONOTONIC_TIMER select TSC_SYNC_MFENCE select UDELAY_TSC - select USE_GENERIC_FSP_CAR_INC +# select USE_GENERIC_FSP_CAR_INC + select CPU_HAS_L2_ENABLE_MSR + select SKIP_FSP_CAR select INTEL_DESCRIPTOR_MODE_CAPABLE select HAVE_SPI_CONSOLE_SUPPORT select HAVE_FSP_GOP diff --git a/src/soc/intel/braswell/Makefile.inc b/src/soc/intel/braswell/Makefile.inc index cc111da..b50dcb8 100644 --- a/src/soc/intel/braswell/Makefile.inc +++ b/src/soc/intel/braswell/Makefile.inc @@ -14,6 +14,8 @@ bootblock-y += lpc_init.c bootblock-y += pmutil.c bootblock-y += tsc_freq.c +bootblock-y += ../../../cpu/intel/car/non-evict/cache_as_ram.S +bootblock-y += ../../../cpu/x86/early_reset.S romstage-y += gpio_support.c romstage-y += iosf.c @@ -27,6 +29,7 @@ postcar-y += iosf.c postcar-y += spi.c postcar-y += tsc_freq.c +postcar-y += ../../../cpu/intel/car/non-evict/exit_car.S ramstage-y += acpi.c ramstage-y += chip.c diff --git a/src/soc/intel/braswell/bootblock/bootblock.c b/src/soc/intel/braswell/bootblock/bootblock.c index d8d953c..eb3712e 100644 --- a/src/soc/intel/braswell/bootblock/bootblock.c +++ b/src/soc/intel/braswell/bootblock/bootblock.c @@ -27,9 +27,14 @@ #include <soc/lpc.h> #include <soc/pm.h> #include <soc/spi.h> +#include <fsp/util.h> +#include <cpu/x86/tsc.h> -asmlinkage void bootblock_c_entry(uint64_t base_timestamp) +static uint64_t car_timestamp; + +asmlinkage void bootblock_c_entry_bist(uint64_t base_timestamp, uint32_t bist) { + car_timestamp = base_timestamp; /* Call lib/bootblock.c main */ bootblock_main_with_basetime(base_timestamp); } @@ -134,6 +139,83 @@ program_base_addresses(); tco_disable(); } + +const struct microcode { + u32 hdrver; /* Header Version */ + u32 rev; /* Update Revision */ + u32 date; /* Date */ + u32 sig; /* Processor Signature */ + + u32 cksum; /* Checksum */ + u32 ldrver; /* Loader Revision */ + u32 pf; /* Processor Flags */ + + u32 data_size; /* Data Size */ + u32 total_size; /* Total Size */ + + u32 reserved[3]; + u8 data[10]; /* Our fake microcode */ +} fake_microcode = { + .hdrver = 1, /* Header Version */ + .rev = 1, /* Update Revision */ + .date = 0x10232019, /* Date: Time of writing 23-10-2019 */ + .sig = 0x00010ff0, /* Sig: (non existing) Family: 0xf, Model: 0x1f, stepping: 0 */ + + .cksum = 0, /* Checksum: not checked by FSP, so won't care */ + .ldrver = 1, /* Loader Revision */ + .pf = 1, /* Processor Flags */ + + .data_size = 0x10, /* Data Size */ + .total_size = 0x40, /* Total Size */ + + .reserved = {}, + .data = {}, +}; + + + + +const FSP_TEMP_RAM_INIT_PARAMS CAR_init_params = { + .MicrocodeRegionBase = (uint32_t)&fake_microcode, + .MicrocodeRegionLength = sizeof(fake_microcode), + .CodeRegionBase = MAX_UINT32 - CONFIG_ROM_SIZE + 1, + .CodeRegionLength = CONFIG_ROM_SIZE, +}; + +struct fsp_t_handoff { + uint32_t bottom_number; + tsc_t final_timestamp; + tsc_t initial_timestamp; + char per0[4]; + uint32_t middle_number; + FSP_TEMP_RAM_INIT_PARAMS fsp_t_params; + char mcud[4]; + uint32_t top_number; +}; + +/* FSP-M expects FSP-T to have run, but we didn't do that. + Fake that we ran FSP by placing the handoff structure FSP-T + normally creates at the top of the CAR region */ +static void install_fsp_t_handoff(void) +{ + struct fsp_t_handoff handoff = { + .bottom_number = 0, + .per0 = "PER0", + .mcud = "MCUD", + .middle_number = 0x18, + .top_number = 0x18, + }; + handoff.initial_timestamp.lo = car_timestamp & UINT32_MAX; + handoff.initial_timestamp.hi = (car_timestamp >> 32) & UINT32_MAX; + handoff.final_timestamp = rdtsc(); + handoff.fsp_t_params = (FSP_TEMP_RAM_INIT_PARAMS)CAR_init_params; + + memcpy((void *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_BASE + + CONFIG_DCACHE_RAM_MRC_VAR_SIZE + - sizeof(struct fsp_t_handoff)), + &handoff, sizeof(handoff)); +} + void bootblock_soc_init(void) { /* Continue chipset initialization */ @@ -142,4 +224,6 @@ spi_init(); lpc_init(); + + install_fsp_t_handoff(); } -- To view, visit https://review.coreboot.org/c/coreboot/+/36263 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I15edf479b09bf9a87afb9ab27e09d4360d21b9ff Gerrit-Change-Number: 36263 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

5 5

Change in coreboot[master]: Revert commit bfb5c807e720761f4457d5106bb919f2aacb5535 binaryPI: Drop...
by Name of user not set (Code Review) 07 Aug '23

07 Aug '23

Name of user not set #1002701 has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37533 ) Change subject: Revert commit bfb5c807e720761f4457d5106bb919f2aacb5535 binaryPI: Drop PSP Secure OS from build ...................................................................... Revert commit bfb5c807e720761f4457d5106bb919f2aacb5535 binaryPI: Drop PSP Secure OS from build For AMD Bettong board to boot these changes should be reverted. Change-Id: I903824019ebbe7934dbe12297b3a223cab3461c5 Signed-off-by: Jorge Fernandez <jorgefm(a)cirsa.com> --- M src/southbridge/amd/pi/hudson/Makefile.inc 1 file changed, 7 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/33/37533/1 diff --git a/src/southbridge/amd/pi/hudson/Makefile.inc b/src/southbridge/amd/pi/hudson/Makefile.inc index 0eccadb..33f59c7 100644 --- a/src/southbridge/amd/pi/hudson/Makefile.inc +++ b/src/southbridge/amd/pi/hudson/Makefile.inc @@ -85,10 +85,10 @@ FIRMWARE_TYPE= PSPBTLDR_FILE=$(top)/$(FIRMWARE_LOCATE)/PspBootLoader.Bypass.sbin -#PSPRCVR_FILE=$(top)/$(FIRMWARE_LOCATE)/PspRecovery.sbin -#PSPSCUREOS_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureOs.sbin -#PSPTRUSTLETS_FILE=$(top)/$(FIRMWARE_LOCATE)/trustlets.bin -#TRUSTLETKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/Trustlet.tkn.cert +PSPRCVR_FILE=$(top)/$(FIRMWARE_LOCATE)/PspRecovery.sbin +PSPSCUREOS_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureOs.sbin +PSPTRUSTLETS_FILE=$(top)/$(FIRMWARE_LOCATE)/trustlets.bin +TRUSTLETKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/Trustlet.tkn.cert endif ifeq ($(CONFIG_CPU_AMD_PI_00660F01), y) @@ -103,12 +103,12 @@ SMUFIRMWARE2_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware2_prod_CZ.sbin endif -#PUBSIGNEDKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/RtmPubSigned$(FIRMWARE_TYPE).key -#PSPNVRAM_FILE=$(top)/$(FIRMWARE_LOCATE)/PspNvram$(FIRMWARE_TYPE).bin +PUBSIGNEDKEY_FILE=$(top)/$(FIRMWARE_LOCATE)/RtmPubSigned$(FIRMWARE_TYPE).key +PSPNVRAM_FILE=$(top)/$(FIRMWARE_LOCATE)/PspNvram$(FIRMWARE_TYPE).bin SMUFWM_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware$(FIRMWARE_TYPE).sbin SMUFWM_FN_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuFirmware$(FIRMWARE_TYPE)_FN.sbin SMUSCS_FILE=$(top)/$(FIRMWARE_LOCATE)/SmuScs$(FIRMWARE_TYPE).bin -#PSPSECUREDEBUG_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureDebug$(FIRMWARE_TYPE).Key +PSPSECUREDEBUG_FILE=$(top)/$(FIRMWARE_LOCATE)/PspSecureDebug$(FIRMWARE_TYPE).Key endif -- To view, visit https://review.coreboot.org/c/coreboot/+/37533 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I903824019ebbe7934dbe12297b3a223cab3461c5 Gerrit-Change-Number: 37533 Gerrit-PatchSet: 1 Gerrit-Owner: Name of user not set #1002701 Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Name of user not set #1002701 Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

4 5

Change in coreboot[master]: utils/kconfig/nconf.c: Fix truncation warning in `item_add_str`
by Jude Rich (Code Review) 07 Aug '23

07 Aug '23

Jude Rich has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37939 ) Change subject: utils/kconfig/nconf.c: Fix truncation warning in `item_add_str` ...................................................................... utils/kconfig/nconf.c: Fix truncation warning in `item_add_str` While appending a string in `item_add_str`, there is a warning about truncating the string to 256 bytes due to unnecessary buffering. By removing the buffering and writing directly to the string, the warning is vanquished. Signed-off-by: Jude A Rich <juder11(a)gmail.com> Change-Id: Idb2dfad7e401954f4bb83d0409ab71dcd7277f47 --- M util/kconfig/nconf.c 1 file changed, 18 insertions(+), 17 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/39/37939/1 diff --git a/util/kconfig/nconf.c b/util/kconfig/nconf.c index 905dcd1..4181c41 100644 --- a/util/kconfig/nconf.c +++ b/util/kconfig/nconf.c @@ -561,32 +561,33 @@ curses_menu_items[items_num] = NULL; } -/* very hackish. adds a string to the last item added */ +/* add a string to the last item added */ static void item_add_str(const char *fmt, ...) { va_list ap; - int index = items_num-1; - char new_str[256]; - char tmp_str[256]; + char *append_ptr; /* pointer to the free space in the target string */ + int index = items_num-1; /* index of item to append string */ + int kmi_str_len; /* length of initial string */ + int str_space; /* length of unused space in string */ + /* return if there's no item to work with */ if (index < 0) return; - va_start(ap, fmt); - vsnprintf(new_str, sizeof(new_str), fmt, ap); - va_end(ap); - snprintf(tmp_str, sizeof(tmp_str), "%s%s", - k_menu_items[index].str, new_str); - strncpy(k_menu_items[index].str, - tmp_str, - sizeof(k_menu_items[index].str)); + kmi_str_len = strlen(k_menu_items[index].str); + str_space = sizeof(k_menu_items[index].str) - kmi_str_len; + append_ptr = k_menu_items[index].str + kmi_str_len; + /* append the string */ + va_start(ap, fmt); + vsnprintf(append_ptr, str_space, fmt, ap); + va_end(ap); + + /* set menu item to new item string */ free_item(curses_menu_items[index]); - curses_menu_items[index] = new_item( - k_menu_items[index].str, - k_menu_items[index].str); - set_item_userptr(curses_menu_items[index], - &k_menu_items[index]); + curses_menu_items[index] = new_item(k_menu_items[index].str, + k_menu_items[index].str); + set_item_userptr(curses_menu_items[index], &k_menu_items[index]); } /* get the tag of the currently selected item */ -- To view, visit https://review.coreboot.org/c/coreboot/+/37939 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Idb2dfad7e401954f4bb83d0409ab71dcd7277f47 Gerrit-Change-Number: 37939 Gerrit-PatchSet: 1 Gerrit-Owner: Jude Rich <juder11(a)gmail.com> Gerrit-MessageType: newchange

3 6

Change in coreboot[master]: soc/intel/common: Make use of clflush in common platform_segment_loaded
by Subrata Banik (Code Review) 07 Aug '23

07 Aug '23

Subrata Banik has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34992 ) Change subject: soc/intel/common: Make use of clflush in common platform_segment_loaded ...................................................................... soc/intel/common: Make use of clflush in common platform_segment_loaded This patch clear cache lines based on platform_segment_loaded() supplied start and size values before loading the targeted stage. This changes is required to fix hang issues appeared due to marking DRAM ranges as WB (CONFIG_MARK_DRAM_CACHE_WB) to speed up next stage loading/ decompression/execution time. Idea is to run clflush on those ranges just before tearing down the CAR (running invd instruction) and after that postcar frame will set up new MTRR ranges. Change-Id: I591f21cb4199477af271f0dd6c073e1c11831bfd Signed-off-by: Subrata Banik <subrata.banik(a)intel.com> --- M src/soc/intel/common/block/cpu/Kconfig M src/soc/intel/common/block/cpu/Makefile.inc A src/soc/intel/common/block/cpu/car/car.c 3 files changed, 71 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/92/34992/1 diff --git a/src/soc/intel/common/block/cpu/Kconfig b/src/soc/intel/common/block/cpu/Kconfig index 8cc572d..0d1506b 100644 --- a/src/soc/intel/common/block/cpu/Kconfig +++ b/src/soc/intel/common/block/cpu/Kconfig @@ -66,3 +66,15 @@ help This option allows FSP to make use of MP services PPI published by coreboot to perform multiprocessor initialization. + +config MARK_DRAM_CACHE_WB + bool + default n + help + This option allows you to select how DRAM intermediate cache is set up. + Till discovering DRAM ranges, system will make use of CAR and CAR tear + down will handle by postcar/ramstage, that means entire postcar/ramstage + stage will execute from UC range. Intention here is to optimize the boot + flow hence enabling the caching for applicable DRAM ranges before CAR + tear down and setting up new DRAM based MTRR range. MTRR type WB + provides best optimization. diff --git a/src/soc/intel/common/block/cpu/Makefile.inc b/src/soc/intel/common/block/cpu/Makefile.inc index a6c4f37..63a2ac9 100644 --- a/src/soc/intel/common/block/cpu/Makefile.inc +++ b/src/soc/intel/common/block/cpu/Makefile.inc @@ -5,6 +5,7 @@ romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_CAR) += car/exit_car.S romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_CPU) += cpulib.c +romstage-$(CONFIG_MARK_DRAM_CACHE_WB) += car.c postcar-$(CONFIG_SOC_INTEL_COMMON_BLOCK_CAR) += car/exit_car.S postcar-$(CONFIG_FSP_CAR) += car/exit_car_fsp.S diff --git a/src/soc/intel/common/block/cpu/car/car.c b/src/soc/intel/common/block/cpu/car/car.c new file mode 100644 index 0000000..82d8e9a --- /dev/null +++ b/src/soc/intel/common/block/cpu/car/car.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <assert.h> +#include <cbmem.h> +#include <cpu/x86/cache.h> +#include <program_loading.h> + +static inline int is_usable_dram_addr(uintptr_t addr) +{ + return (addr < (uintptr_t) cbmem_top()); +} + +/* + * CLFLUSH the impacted WB'ed cache lines before loading postcar/ramstage + * in order to avoid getting stuck while tearing down (invd) the CAR. + */ +static void flush_cache(uintptr_t start, size_t size) +{ + uintptr_t end; + uintptr_t addr; + + end = start + (ALIGN_DOWN(size + 4096, 4096)); + for (addr = start; addr < end; addr += 64) + clflush((void *)addr); +} + +void platform_segment_loaded(uintptr_t start, size_t size, int flags) +{ + /* Bail out if this is not the final segment. */ + if (!(flags & SEG_FINAL)) + return; + + char start_dram_check = is_usable_dram_addr(start); + char end_dram_check = is_usable_dram_addr(start + size - 1); + + /* + * Bail out if loaded program segment does not lie in + * usable DRAM region. + */ + if (!start_dram_check && !end_dram_check) + return; + + flush_cache(start, size); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/34992 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I591f21cb4199477af271f0dd6c073e1c11831bfd Gerrit-Change-Number: 34992 Gerrit-PatchSet: 1 Gerrit-Owner: Subrata Banik <subrata.banik(a)intel.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Subrata Banik <subrata.banik(a)intel.com> Gerrit-MessageType: newchange

3 5

← Newer
1
...
6
7
8
9
10
11
12
...
317
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit July 2020