coreboot-gerrit November 2020

coreboot-gerrit@coreboot.org

1 participants
3241 discussions

Change in coreboot[master]: [WIP]mb/intel/minnowmax: Add mainboard
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44102 ) Change subject: [WIP]mb/intel/minnowmax: Add mainboard ...................................................................... [WIP]mb/intel/minnowmax: Add mainboard TODO: Fixup SPD handling, Check PCI (vendor disables most) Working: USB (EHCI and XHCI), SATA, UART, ethernet Change-Id: I9a1236425c8a0914f92adcad445230ef2692393a Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- A src/mainboard/intel/minnowmax/Kconfig A src/mainboard/intel/minnowmax/Kconfig.name A src/mainboard/intel/minnowmax/Makefile.inc A src/mainboard/intel/minnowmax/acpi/ec.asl A src/mainboard/intel/minnowmax/acpi/mainboard.asl A src/mainboard/intel/minnowmax/acpi/superio.asl A src/mainboard/intel/minnowmax/acpi_tables.c A src/mainboard/intel/minnowmax/board_info.txt A src/mainboard/intel/minnowmax/cmos.layout A src/mainboard/intel/minnowmax/data.vbt A src/mainboard/intel/minnowmax/devicetree.cb A src/mainboard/intel/minnowmax/dsdt.asl A src/mainboard/intel/minnowmax/gpio.c A src/mainboard/intel/minnowmax/irqroute.c A src/mainboard/intel/minnowmax/irqroute.h A src/mainboard/intel/minnowmax/mainboard.c A src/mainboard/intel/minnowmax/romstage.c A src/mainboard/intel/minnowmax/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex M src/soc/intel/baytrail/Makefile.inc M src/soc/intel/baytrail/refcode.c 20 files changed, 662 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/44102/1 diff --git a/src/mainboard/intel/minnowmax/Kconfig b/src/mainboard/intel/minnowmax/Kconfig new file mode 100644 index 0000000..d7ad307 --- /dev/null +++ b/src/mainboard/intel/minnowmax/Kconfig @@ -0,0 +1,50 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## Copyright (C) 2014 Intel Corporation +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +if BOARD_INTEL_MINNOWMAX + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select SOC_INTEL_BAYTRAIL + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select ENABLE_BUILTIN_COM1 if CONSOLE_SERIAL + select HAVE_ACPI_RESUME + select INTEL_GMA_HAVE_VBT + +config MAINBOARD_DIR + string + default "intel/minnowmax" + +config MAINBOARD_PART_NUMBER + string + default "Minnow Max" + +config CBFS_SIZE + hex + default 0x00300000 + +config POST_DEVICE + bool + default n + +config SEABIOS_HARDWARE_IRQ + bool + default n + + +endif # BOARD_INTEL_MINNOWMAX diff --git a/src/mainboard/intel/minnowmax/Kconfig.name b/src/mainboard/intel/minnowmax/Kconfig.name new file mode 100644 index 0000000..abe9225 --- /dev/null +++ b/src/mainboard/intel/minnowmax/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_INTEL_MINNOWMAX + bool "Minnow Max" diff --git a/src/mainboard/intel/minnowmax/Makefile.inc b/src/mainboard/intel/minnowmax/Makefile.inc new file mode 100644 index 0000000..6d22cdf --- /dev/null +++ b/src/mainboard/intel/minnowmax/Makefile.inc @@ -0,0 +1,22 @@ +## SPDX-License-Identifier: GPL-2.0-only + +ramstage-y += gpio.c +ramstage-y += irqroute.c + +SPD_BIN = $(obj)/spd.bin + +SPD_SOURCES = micron_2GiB_dimm_MT41K256M16HA-125 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd ROM data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/intel/minnowmax/acpi/ec.asl b/src/mainboard/intel/minnowmax/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/intel/minnowmax/acpi/ec.asl diff --git a/src/mainboard/intel/minnowmax/acpi/mainboard.asl b/src/mainboard/intel/minnowmax/acpi/mainboard.asl new file mode 100644 index 0000000..d17d26f --- /dev/null +++ b/src/mainboard/intel/minnowmax/acpi/mainboard.asl @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * NOTE: this has to be here even when the board has no LPE audio, otherwise + * it breaks the SOC specific ACPI code + */ +Scope (\_SB.PCI0.LPEA) +{ + Name (GBUF, ResourceTemplate () {}) +} + + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) +} diff --git a/src/mainboard/intel/minnowmax/acpi/superio.asl b/src/mainboard/intel/minnowmax/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/intel/minnowmax/acpi/superio.asl diff --git a/src/mainboard/intel/minnowmax/acpi_tables.c b/src/mainboard/intel/minnowmax/acpi_tables.c new file mode 100644 index 0000000..5439050 --- /dev/null +++ b/src/mainboard/intel/minnowmax/acpi_tables.c @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +#include <acpi/acpi_gnvs.h> +#include <arch/ioapic.h> +#include <device/device.h> +#include <soc/acpi.h> +#include <soc/nvs.h> +#include <soc/iomap.h> + +void acpi_create_gnvs(struct global_nvs *gnvs) +{ + acpi_init_gnvs(gnvs); + + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + /* Disable USB ports in S5 */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + /* TPM not present */ + gnvs->tpmp = 0; + /* Disable DPTF */ + gnvs->dpte = 0; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + current = acpi_madt_irq_overrides(current); + + return current; +} + +void mainboard_fill_fadt(acpi_fadt_t *fadt) +{ + fadt->preferred_pm_profile = PM_DESKTOP; +} diff --git a/src/mainboard/intel/minnowmax/board_info.txt b/src/mainboard/intel/minnowmax/board_info.txt new file mode 100644 index 0000000..5af79f8 --- /dev/null +++ b/src/mainboard/intel/minnowmax/board_info.txt @@ -0,0 +1,4 @@ +Category: sbc +ROM protocol: SPI +Flashrom support: y +Release year: 2014 diff --git a/src/mainboard/intel/minnowmax/cmos.layout b/src/mainboard/intel/minnowmax/cmos.layout new file mode 100644 index 0000000..bbc3f3c --- /dev/null +++ b/src/mainboard/intel/minnowmax/cmos.layout @@ -0,0 +1,44 @@ + +## SPDX-License-Identifier: GPL-2.0-only +# ----------------------------------------------------------------- +entries +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +# ----------------------------------------------------------------- +# coreboot config options: console +395 4 e 6 debug_level +# coreboot config options: cpu +400 1 e 2 hyper_threading +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +# coreboot config options: check sums +984 16 h 0 check_sum +# ----------------------------------------------------------------- +enumerations +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums +checksum 392 415 984 diff --git a/src/mainboard/intel/minnowmax/data.vbt b/src/mainboard/intel/minnowmax/data.vbt new file mode 100644 index 0000000..cfb393c --- /dev/null +++ b/src/mainboard/intel/minnowmax/data.vbt Binary files differ diff --git a/src/mainboard/intel/minnowmax/devicetree.cb b/src/mainboard/intel/minnowmax/devicetree.cb new file mode 100644 index 0000000..7f5a907 --- /dev/null +++ b/src/mainboard/intel/minnowmax/devicetree.cb @@ -0,0 +1,82 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## Copyright (C) 2014 Intel Corporation +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip soc/intel/baytrail + + register "usb2_comp_bg" = "0x4700" + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + # SATA port enable mask (2 ports) + register "sata_port_map" = "0x1" + register "sata_ahci" = "0x1" + # Do not route USB ports to XHCI + register "usb_route_to_xhci" = "0" + # USB Port Disable Mask + register "usb2_port_disable_mask" = "0x0" + register "usb3_port_disable_mask" = "0x0" + # USB PHY settings + register "usb2_per_port_lane0" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" + register "usb2_per_port_lane1" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" + register "usb2_per_port_lane2" = "0x00049209" + register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" + register "usb2_per_port_lane3" = "0x00049a09" + register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # 8086 0F00 - SoC router - + device pci 02.0 on end # 8086 0F31 - GFX micro HDMI + device pci 03.0 off end # 8086 0F38 - MIPI - + + device pci 10.0 off end # 8086 0F14 - MMC Port - + device pci 11.0 off end # 8086 0F15 - SDIO Port - + device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 + device pci 13.0 on end # 8086 0F23 - SATA AHCI Onboard & HSEC + device pci 14.0 on end # 8086 0F35 - USB XHCI - Onboard & HSEC - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime + device pci 15.0 on end # 8086 0F28 - LP Engine Audio LSEC + device pci 17.0 off end # 8086 0F50 - MMC45 Port - + device pci 18.0 on end # 8086 0F40 - SIO - DMA - + device pci 18.1 off end # 8086 0F41 - I2C Port 1 (0) - + device pci 18.2 on end # 8086 0F42 - I2C Port 2 (1) - (testpoints) + device pci 18.3 off end # 8086 0F43 - I2C Port 3 (2) - + device pci 18.4 off end # 8086 0F44 - I2C Port 4 (3) - + device pci 18.5 off end # 8086 0F45 - I2C Port 5 (4) - + device pci 18.6 on end # 8086 0F46 - I2C Port 6 (5) LSEC + device pci 18.7 on end # 8086 0F47 - I2C Port 7 (6) HSEC + device pci 1a.0 on end # 8086 0F18 - TXE - + device pci 1b.0 off end # 8086 0F04 - HD Audio - + device pci 1c.0 on end # 8086 0F48 - PCIe Port 1 (0) Must remain on + device pci 1c.1 on end # 8086 0F4A - PCIe Port 2 (1) Onboard GBE (some models) + device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) Onboard GBE + device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) HSEC + device pci 1d.0 on end # 8086 0F34 - USB EHCI - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime + device pci 1e.0 on end # 8086 0F06 - SIO - DMA - + device pci 1e.1 on end # 8086 0F08 - PWM 1 LSEC + device pci 1e.2 on end # 8086 0F09 - PWM 2 LSEC + device pci 1e.3 on end # 8086 0F0A - HSUART 1 LSEC + device pci 1e.4 on end # 8086 0F0C - HSUART 2 LSEC + device pci 1e.5 on end # 8086 0F0E - SPI LSEC + device pci 1f.0 on end # 8086 0F1C - LPC bridge No connector + device pci 1f.3 on end # 8086 0F12 - SMBus 0 SPC + end +end diff --git a/src/mainboard/intel/minnowmax/dsdt.asl b/src/mainboard/intel/minnowmax/dsdt.asl new file mode 100644 index 0000000..0ae74495 --- /dev/null +++ b/src/mainboard/intel/minnowmax/dsdt.asl @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#include <acpi/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 // OEM revision +) +{ + #include <soc/intel/baytrail/acpi/platform.asl> + // global NVS and variables + #include <soc/intel/baytrail/acpi/globalnvs.asl> + #include <cpu/intel/common/acpi/cpu.asl> + Device (\_SB.PCI0) + { + #include <soc/intel/baytrail/acpi/southcluster.asl> + } + #include <southbridge/intel/common/acpi/sleepstates.asl> + #include "acpi/mainboard.asl" +} \ No newline at end of file diff --git a/src/mainboard/intel/minnowmax/gpio.c b/src/mainboard/intel/minnowmax/gpio.c new file mode 100644 index 0000000..8b5a639 --- /dev/null +++ b/src/mainboard/intel/minnowmax/gpio.c @@ -0,0 +1,242 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdlib.h> +#include <soc/gpio.h> +#include "irqroute.h" + +#define GPIO_OUT_HIGH_LEGACY \ + { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ + .pad_conf1 = PAD_CONFIG1_DEFAULT, \ + .pad_val = PAD_VAL_OUTPUT | PAD_VAL_HIGH, \ + .use_sel = GPIO_USE_LEGACY, \ + .io_sel = GPIO_DIR_OUTPUT, \ + .gp_lvl = GPIO_LEVEL_HIGH, \ + .is_gpio = 1 } + + +/* + * For multiplexed functions, look in EDS: + * 10.3 Ball Name and Function by Location + * + * The pads list is in the BWG_VOL2 Rev1p2: + * Note that Pad # is not the same as GPIO# + * 37 GPIO Handling: + * Table 37-1. SCORE Pads List + * Table 37-2. SSUSORE Pads List + */ + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, // GPIO_S0_NC[00] - HDMI_HPD + GPIO_FUNC2, // GPIO_S0_NC[01] - HDMI_DDCDAT + GPIO_FUNC2, // GPIO_S0_NC[02] - HDMI_DDCCLK + GPIO_NC, // GPIO_S0_NC[03] - No Connect + GPIO_NC, // GPIO_S0_NC[04] - No Connect + GPIO_NC, // GPIO_S0_NC[05] - No Connect + GPIO_NC, // GPIO_S0_NC[06] - No Connect + GPIO_FUNC2, // GPIO_S0_NC[07] - DDI1_DDCDAT + GPIO_NC, // GPIO_S0_NC[08] - No Connect + GPIO_NC, // GPIO_S0_NC[09] - No Connect + GPIO_NC, // GPIO_S0_NC[10] - No Connect + GPIO_NC, // GPIO_S0_NC[11] - No Connect + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S0_NC[12] - TP15 + GPIO_NC, // GPIO_S0_NC[13] - No Connect + GPIO_NC, // GPIO_S0_NC[14] - No Connect + GPIO_NC, // GPIO_S0_NC[15] - No Connect + GPIO_NC, // GPIO_S0_NC[16] - No Connect + GPIO_NC, // GPIO_S0_NC[17] - No Connect + GPIO_NC, // GPIO_S0_NC[18] - No Connect + GPIO_NC, // GPIO_S0_NC[19] - No Connect + GPIO_NC, // GPIO_S0_NC[20] - No Connect + GPIO_NC, // GPIO_S0_NC[21] - No Connect + GPIO_NC, // GPIO_S0_NC[22] - No Connect + GPIO_NC, // GPIO_S0_NC[23] - No Connect + GPIO_NC, // GPIO_S0_NC[24] - No Connect + GPIO_NC, // GPIO_S0_NC[25] - No Connect + GPIO_NC, // GPIO_S0_NC[26] - No Connect + GPIO_END +}; + +/* SCORE GPIOs (GPIO_S0_SC_XX) */ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_FUNC1, // GPIO_S0_SC[000] - SATA_GP0 + GPIO_FUNC1, // GPIO_S0_SC[001] - SATA_GP1 + GPIO_FUNC1, // GPIO_S0_SC[002] - SATA_LED_B + GPIO_FUNC1, // GPIO_S0_SC[003] - PCIE_CLKREQ_0 + GPIO_FUNC1, // GPIO_S0_SC[004] - PCIE_CLKREQ_1 + GPIO_FUNC1, // GPIO_S0_SC[005] - PCIE_CLKREQ_2 + GPIO_FUNC1, // GPIO_S0_SC[006] - PCIE_CLKREQ_3 + GPIO_FUNC2, // GPIO_S0_SC[007] - SD3_WP + GPIO_NC, // GPIO_S0_SC[008] - No Connect + GPIO_NC, // GPIO_S0_SC[009] - No Connect + GPIO_NC, // GPIO_S0_SC[010] - No Connect + GPIO_NC, // GPIO_S0_SC[011] - No Connect + GPIO_NC, // GPIO_S0_SC[012] - No Connect + GPIO_NC, // GPIO_S0_SC[013] - No Connect + GPIO_NC, // GPIO_S0_SC[014] - No Connect + GPIO_NC, // GPIO_S0_SC[015] - No Connect + GPIO_NC, // GPIO_S0_SC[016] - No Connect + GPIO_NC, // GPIO_S0_SC[017] - No Connect + GPIO_NC, // GPIO_S0_SC[018] - No Connect + GPIO_NC, // GPIO_S0_SC[019] - No Connect + GPIO_NC, // GPIO_S0_SC[020] - No Connect + GPIO_NC, // GPIO_S0_SC[021] - No Connect + GPIO_NC, // GPIO_S0_SC[022] - No Connect + GPIO_NC, // GPIO_S0_SC[023] - No Connect + GPIO_NC, // GPIO_S0_SC[024] - No Connect + GPIO_NC, // GPIO_S0_SC[025] - No Connect + GPIO_NC, // GPIO_S0_SC[026] - No Connect + GPIO_NC, // GPIO_S0_SC[027] - No Connect + GPIO_NC, // GPIO_S0_SC[028] - No Connect + GPIO_NC, // GPIO_S0_SC[029] - No Connect + GPIO_NC, // GPIO_S0_SC[030] - No Connect + GPIO_NC, // GPIO_S0_SC[031] - No Connect + GPIO_NC, // GPIO_S0_SC[032] - No Connect + GPIO_FUNC1, // GPIO_S0_SC[033] - SD3_CLK + GPIO_FUNC1, // GPIO_S0_SC[034] - SD3_D0 + GPIO_FUNC1, // GPIO_S0_SC[035] - SD3_D1 + GPIO_FUNC1, // GPIO_S0_SC[036] - SD3_D2 + GPIO_FUNC1, // GPIO_S0_SC[037] - SD3_D3 + GPIO_FUNC1, // GPIO_S0_SC[038] - SD3_CD# + GPIO_FUNC1, // GPIO_S0_SC[039] - SD3_CMD + GPIO_FUNC1, // GPIO_S0_SC[040] - TP12 (SD3_1P8EN) + GPIO_FUNC1, // GPIO_S0_SC[041] - TP11 (/SD3_PWREN) + GPIO_NC, // GPIO_S0_SC[042] - No Connect + GPIO_NC, // GPIO_S0_SC[043] - No Connect + GPIO_NC, // GPIO_S0_SC[044] - No Connect + GPIO_NC, // GPIO_S0_SC[045] - No Connect + GPIO_NC, // GPIO_S0_SC[046] - No Connect + GPIO_NC, // GPIO_S0_SC[047] - No Connect + GPIO_NC, // GPIO_S0_SC[048] - No Connect + GPIO_NC, // GPIO_S0_SC[049] - No Connect + GPIO_NC, // GPIO_S0_SC[050] - No Connect + GPIO_FUNC1, // GPIO_S0_SC[051] - PCU_SMB_DATA + GPIO_FUNC1, // GPIO_S0_SC[052] - PCU_SMB_CLK + GPIO_FUNC1, // GPIO_S0_SC[053] - PCU_SMB_ALERT + GPIO_FUNC1, // GPIO_S0_SC[054] - ILB_8254_SPKR + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S0_SC[055] - TP8 (GPIO_S0_SC_55) + GPIO_FUNC0, // GPIO_S0_SC[056] - GPIO_S0_SC_56 + GPIO_FUNC1, // GPIO_S0_SC[057] - PCU_UART3_TXD + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S0_SC[058] - TP9 (GPIO_S0_SC_58) + GPIO_FUNC0, // GPIO_S0_SC[059] - HDMI_DCDC_ENB + GPIO_FUNC0, // GPIO_S0_SC[060] - HDMI_LDSW_ENB + GPIO_FUNC1, // GPIO_S0_SC[061] - PCU_UART3_RXD + GPIO_FUNC1, // GPIO_S0_SC[062] - LPE_I2S_CLK + GPIO_FUNC1, // GPIO_S0_SC[063] - LPE_I2S_FRM + GPIO_FUNC1, // GPIO_S0_SC[064] - LPE_I2S_DATIN + GPIO_FUNC1, // GPIO_S0_SC[065] - LPE_I2S_DATOUT + GPIO_FUNC1, // GPIO_S0_SC[066] - SOC_SIO_SPI_CS1 + GPIO_FUNC1, // GPIO_S0_SC[067] - SOC_SIO_SPI_MISO + GPIO_FUNC1, // GPIO_S0_SC[068] - SOC_SIO_SPI_MOSI + GPIO_FUNC1, // GPIO_S0_SC[069] - SOC_SIO_SPI_CLK + GPIO_FUNC1, // GPIO_S0_SC[070] - SIO_UART1_RXD + GPIO_FUNC1, // GPIO_S0_SC[071] - SIO_UART1_TXD + GPIO_FUNC1, // GPIO_S0_SC[072] - SIO_UART1_RTSB + GPIO_FUNC1, // GPIO_S0_SC[073] - SIO_UART1_CTSB + GPIO_FUNC1, // GPIO_S0_SC[074] - SIO_UART2_RXD + GPIO_FUNC1, // GPIO_S0_SC[075] - SIO_UART2_TXD + GPIO_NC, // GPIO_S0_SC[076] - No Connect + GPIO_NC, // GPIO_S0_SC[077] - No Connect + GPIO_NC, // GPIO_S0_SC[078] - No Connect + GPIO_NC, // GPIO_S0_SC[079] - No Connect + GPIO_FUNC1, // GPIO_S0_SC[080] - TP6 (SIO_I2C1_SDA) + GPIO_FUNC1, // GPIO_S0_SC[081] - TP5 (SIO_I2C1_SCL) + GPIO_NC, // GPIO_S0_SC[082] - No Connect + GPIO_NC, // GPIO_S0_SC[083] - No Connect + GPIO_NC, // GPIO_S0_SC[084] - No Connect + GPIO_NC, // GPIO_S0_SC[085] - No Connect + GPIO_NC, // GPIO_S0_SC[086] - No Connect + GPIO_NC, // GPIO_S0_SC[087] - No Connect + GPIO_FUNC1, // GPIO_S0_SC[088] - LSS_I2C_SDA + GPIO_FUNC1, // GPIO_S0_SC[089] - LSS_I2C_SCL + GPIO_FUNC1, // GPIO_S0_SC[090] - EXP_I2C_SDA + GPIO_FUNC1, // GPIO_S0_SC[091] - EXP_I2C_SCL + GPIO_FUNC(1, PULL_UP, 20K), // GPIO_S0_SC[092] - TP13 + GPIO_FUNC(1, PULL_UP, 20K), // GPIO_S0_SC[093] - TP16 + GPIO_FUNC1, // GPIO_S0_SC[094] - SOC_PWM0 + GPIO_FUNC1, // GPIO_S0_SC[095] - SOC_PWM1 + GPIO_NC, // GPIO_S0_SC[096] - No Connect + GPIO_NC, // GPIO_S0_SC[097] - No Connect + GPIO_NC, // GPIO_S0_SC[098] - No Connect + GPIO_NC, // GPIO_S0_SC[099] - No Connect + GPIO_NC, // GPIO_S0_SC[100] - No Connect + GPIO_NC, // GPIO_S0_SC[101] - No Connect + GPIO_END +}; + +/* SSUS GPIOs (GPIO_S5) */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[00] - SOC_GPIO_S5_0 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[01] - SOC_GPIO_S5_1 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[02] - SOC_GPIO_S5_2 + GPIO_FUNC6, // GPIO_S5[03] - mPCIE_WAKEB + GPIO_NC, // GPIO_S5[04] - No Connect + GPIO_INPUT, // GPIO_S5[05] - BOM_OP1 + // Memory: 0=1GB 1=2GB or 4GB + GPIO_INPUT, // GPIO_S5[06] - BOM_OP2 + GPIO_INPUT, // GPIO_S5[07] - BOM_OP3 + GPIO_OUT_HIGH_LEGACY, // GPIO_S5[08] - SOC_USB_HOST_EN0 + GPIO_OUT_HIGH_LEGACY, // GPIO_S5[09] - SOC_USB_HOST_EN1 + GPIO_OUT_HIGH_LEGACY, // GPIO_S5[10] - GPIO_S5_10_UNLOCK + GPIO_FUNC0, // GPIO_S5[11] - SUSPWRDNACK (TP14) + GPIO_FUNC0, // GPIO_S5[12] - PMC_SUSCLK0 + GPIO_FUNC1, // GPIO_S5[13] - PMC_SLP_S0IX (TP10) + GPIO_FUNC1, // GPIO_S5[14] - GPIO_S514_J20 + GPIO_FUNC0, // GPIO_S5[15] - PMC_PCIE_WAKE_R + GPIO_FUNC0, // GPIO_S5[16] - PMC_PWRBTN + GPIO_NC, // GPIO_S5[17] - No Connect + GPIO_FUNC1, // GPIO_S5[18] - LPCPD_L (TP7) + GPIO_FUNC0, // GPIO_S5[19] - SOC_USB_HOST_OC0 + GPIO_FUNC0, // GPIO_S5[20] - SOC_USB_HOST_OC1 + GPIO_FUNC0, // GPIO_S5[21] - SOC_SPI_CS1B + GPIO_INPUT_PD, // GPIO_S5[22] - NC or LED D2 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[23] - XDP_H_OBSDATA_A0 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[24] - XDP_H_OBSDATA_A1 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[25] - XDP_H_OBSDATA_A2 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[26] - XDP_H_OBSDATA_A3 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[27] - EXP_GPIO1 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[28] - EXP_GPIO2 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[29] - EXP_GPIO3 + GPIO_FUNC(0, PULL_UP, 20K), // GPIO_S5[30] - EXP_GPIO4 + GPIO_NC, // GPIO_S5[31] - No Connect + GPIO_NC, // GPIO_S5[32] - No Connect + GPIO_NC, // GPIO_S5[33] - No Connect + GPIO_NC, // GPIO_S5[34] - No Connect + GPIO_NC, // GPIO_S5[35] - No Connect + GPIO_NC, // GPIO_S5[36] - No Connect + GPIO_NC, // GPIO_S5[37] - No Connect + GPIO_NC, // GPIO_S5[38] - No Connect + GPIO_NC, // GPIO_S5[39] - No Connect + GPIO_NC, // GPIO_S5[40] - No Connect + GPIO_NC, // GPIO_S5[41] - No Connect + GPIO_NC, // GPIO_S5[42] - No Connect + GPIO_NC, // GPIO_S5[43] - No Connect + GPIO_END +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = NULL, + .sus_dirq = NULL, +}; + +struct soc_gpio_config *mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/intel/minnowmax/irqroute.c b/src/mainboard/intel/minnowmax/irqroute.c new file mode 100644 index 0000000..6fa0366 --- /dev/null +++ b/src/mainboard/intel/minnowmax/irqroute.c @@ -0,0 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include "irqroute.h" + +DEFINE_IRQ_ROUTES; diff --git a/src/mainboard/intel/minnowmax/irqroute.h b/src/mainboard/intel/minnowmax/irqroute.h new file mode 100644 index 0000000..e0e43f0 --- /dev/null +++ b/src/mainboard/intel/minnowmax/irqroute.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/irq.h> +#include <soc/pci_devs.h> + +#define PCI_DEV_PIRQ_ROUTES \ + PCI_DEV_PIRQ_ROUTE(GFX_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(SD_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(SATA_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(XHCI_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(LPE_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(SIO1_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(TXE_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(PCIE_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(EHCI_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(SIO2_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(PCU_DEV, A, B, C, D) + +#define PIRQ_PIC_ROUTES \ + PIRQ_PIC(A, DISABLE), \ + PIRQ_PIC(B, DISABLE), \ + PIRQ_PIC(C, DISABLE), \ + PIRQ_PIC(D, DISABLE), \ + PIRQ_PIC(E, DISABLE), \ + PIRQ_PIC(F, DISABLE), \ + PIRQ_PIC(G, DISABLE), \ + PIRQ_PIC(H, DISABLE) diff --git a/src/mainboard/intel/minnowmax/mainboard.c b/src/mainboard/intel/minnowmax/mainboard.c new file mode 100644 index 0000000..69b9405 --- /dev/null +++ b/src/mainboard/intel/minnowmax/mainboard.c @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +#include <bootstate.h> +void mainboard_suspend_resume(void) +{ +} + +static void mainboard_init(struct device *dev) +{ +} +static int mainboard_smbios_data(struct device *dev, int *handle, + unsigned long *current) +{ + return 0; +} +// mainboard_enable is executed as first thing after +// enumerate_buses(). +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + dev->ops->get_smbios_data = mainboard_smbios_data; +} +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/minnowmax/romstage.c b/src/mainboard/intel/minnowmax/romstage.c new file mode 100644 index 0000000..c504cd4 --- /dev/null +++ b/src/mainboard/intel/minnowmax/romstage.c @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <stdint.h> +#include <soc/gpio.h> +#include <cbfs.h> +#include <console/console.h> +#include <soc/mrc_wrapper.h> +#include <soc/romstage.h> + +#define DRAM_GPIO_FUSE 5 +#define SPD_SIZE 256 + +static void *get_spd_pointer(char *spd_file_content) +{ + u8 gpio5 = 0; + + ssus_disable_internal_pull(DRAM_GPIO_FUSE); + + gpio5 = ssus_get_gpio(DRAM_GPIO_FUSE); + + // TODO + return &spd_file_content[SPD_SIZE * 0]; +} + +void mainboard_fill_mrc_params(struct mrc_params *mp) +{ + void *spd_content; + void *spd_file; + size_t spd_fsize; + + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, &spd_fsize); + + if (!spd_file) + die("SPD data not found."); + + spd_content = get_spd_pointer(spd_file); + + mp->mainboard.dram_type = DRAM_DDR3L; + mp->mainboard.dram_info_location = DRAM_INFO_SPD_MEM; + mp->mainboard.weaker_odt_settings = 1; + + mp->mainboard.dram_data[0] = spd_content; +} diff --git a/src/mainboard/intel/minnowmax/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex b/src/mainboard/intel/minnowmax/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex new file mode 100644 index 0000000..f3bcb56 --- /dev/null +++ b/src/mainboard/intel/minnowmax/spd/micron_2GiB_dimm_MT41K256M16HA-125.spd.hex @@ -0,0 +1,32 @@ +92 11 0b 03 04 19 02 02 +03 11 01 08 0a 00 fe 00 +69 78 69 3c 69 11 18 86 +20 08 3c 3c 01 40 83 05 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 0f 01 02 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 80 2c 00 +00 00 00 00 00 00 19 d2 +34 4b 54 46 32 35 36 36 +34 48 5a 2d 31 47 36 45 +31 20 45 31 80 2c 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff +ff ff ff ff ff ff ff ff diff --git a/src/soc/intel/baytrail/Makefile.inc b/src/soc/intel/baytrail/Makefile.inc index bfa1846..cd03458 100644 --- a/src/soc/intel/baytrail/Makefile.inc +++ b/src/soc/intel/baytrail/Makefile.inc @@ -66,8 +66,7 @@ postcar-y += ../../../cpu/intel/car/non-evict/exit_car.S -cpu_microcode_bins += 3rdparty/blobs/soc/intel/baytrail/microcode.bin \ - 3rdparty/intel-microcode/intel-ucode/06-37-09 +cpu_microcode_bins += 3rdparty/intel-microcode/intel-ucode/06-37-* CPPFLAGS_common += -Isrc/soc/intel/baytrail/include diff --git a/src/soc/intel/baytrail/refcode.c b/src/soc/intel/baytrail/refcode.c index 297ed9c..99fb335 100644 --- a/src/soc/intel/baytrail/refcode.c +++ b/src/soc/intel/baytrail/refcode.c @@ -19,7 +19,7 @@ static efi_wrapper_entry_t load_refcode_from_cache(void) { - struct prog refcode; + static struct prog refcode; printk(BIOS_DEBUG, "refcode loading from cache.\n"); -- To view, visit https://review.coreboot.org/c/coreboot/+/44102 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9a1236425c8a0914f92adcad445230ef2692393a Gerrit-Change-Number: 44102 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

5 15

Change in coreboot[master]: mb/google/volteer: Implement variant_devtree_update for volteer sku's
by Shaunak Saha (Code Review) 07 Aug '23

07 Aug '23

Shaunak Saha has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44261 ) Change subject: mb/google/volteer: Implement variant_devtree_update for volteer sku's ...................................................................... mb/google/volteer: Implement variant_devtree_update for volteer sku's HybridStorageMode FSP UPD needs to be set only for optane storage. Enabling HybridStorageMode causes some extra delay in FspSiliconInit due to HECI command and hence is avoided for NVMe and SATA scenerios. This change disables "HybridStorageMode" by default from baseboard devicetree. Any volteer variant which is using optane should enable "HybridStorageMode" from the override devicetree file.This change also provides an implementation of variant_devtree_update() for volteer that enables HybridStorageMode for SKU ID = 3 and 5. BUG=b:158573805 TEST=Verify HybridStorageMode is disabled when SKU ID != 3 or 5 and enabled for those 2 sku's only. Signed-off-by: Shaunak Saha <shaunak.saha(a)intel.com> Change-Id: I5c3bcfafe1710155bb47f706c3568dd9500c1975 --- M src/mainboard/google/volteer/Makefile.inc A src/mainboard/google/volteer/ramstage.c M src/mainboard/google/volteer/variants/baseboard/devicetree.cb M src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h M src/mainboard/google/volteer/variants/volteer/Makefile.inc A src/mainboard/google/volteer/variants/volteer/variant.c 6 files changed, 39 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/61/44261/1 diff --git a/src/mainboard/google/volteer/Makefile.inc b/src/mainboard/google/volteer/Makefile.inc index c01f993..b5579a7 100644 --- a/src/mainboard/google/volteer/Makefile.inc +++ b/src/mainboard/google/volteer/Makefile.inc @@ -10,6 +10,7 @@ ramstage-y += ec.c ramstage-$(CONFIG_FW_CONFIG) += fw_config.c ramstage-y += mainboard.c +ramstage-y += ramstage.c smm-y += smihandler.c diff --git a/src/mainboard/google/volteer/ramstage.c b/src/mainboard/google/volteer/ramstage.c new file mode 100644 index 0000000..084e69e --- /dev/null +++ b/src/mainboard/google/volteer/ramstage.c @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <soc/ramstage.h> + +void mainboard_silicon_init_params(FSP_S_CONFIG *params) +{ + variant_devtree_update(); +} + +void __weak variant_devtree_update(void) +{ + /* Override dev tree settings per board */ +} + diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index 53bbe5a..ccd1877 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -81,7 +81,9 @@ # Enable Optane PCIE 11 using clk 0 register "PcieRpEnable[10]" = "1" register "PcieRpLtrEnable[10]" = "1" - register "HybridStorageMode" = "1" + # Disable it by default. Device tree overwrite needs to enable this feature + # for platforms using Optane memory. + register "HybridStorageMode" = "0" # Enable SD Card PCIE 8 using clk 3 register "PcieRpEnable[7]" = "1" diff --git a/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h index 2f90a42..aa8ea27 100644 --- a/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h +++ b/src/mainboard/google/volteer/variants/baseboard/include/baseboard/variants.h @@ -21,4 +21,6 @@ const struct lpddr4x_cfg *variant_memory_params(void); int variant_memory_sku(void); +void variant_devtree_update(void); + #endif /* __BASEBOARD_VARIANTS_H__ */ diff --git a/src/mainboard/google/volteer/variants/volteer/Makefile.inc b/src/mainboard/google/volteer/variants/volteer/Makefile.inc index 13269db..04af3ae 100644 --- a/src/mainboard/google/volteer/variants/volteer/Makefile.inc +++ b/src/mainboard/google/volteer/variants/volteer/Makefile.inc @@ -3,3 +3,4 @@ bootblock-y += gpio.c ramstage-y += gpio.c +ramstage-y += variant.c diff --git a/src/mainboard/google/volteer/variants/volteer/variant.c b/src/mainboard/google/volteer/variants/volteer/variant.c new file mode 100644 index 0000000..8d3adef --- /dev/null +++ b/src/mainboard/google/volteer/variants/volteer/variant.c @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <chip.h> +#include <ec/google/chromeec/ec.h> + +void variant_devtree_update(void) +{ + uint32_t sku_id; + config_t *cfg = config_of_soc(); + + if (google_chromeec_cbi_get_sku_id(&sku_id)) + return; + + if ((sku_id == 3) || (sku_id == 5)) + cfg->HybridStorageMode = 1; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/44261 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5c3bcfafe1710155bb47f706c3568dd9500c1975 Gerrit-Change-Number: 44261 Gerrit-PatchSet: 1 Gerrit-Owner: Shaunak Saha <shaunak.saha(a)intel.com> Gerrit-MessageType: newchange

4 11

Change in coreboot[master]: mb/lenovo/thinkcentre_m91p add ThinkCentre M91p
by Name of user not set (Code Review) 07 Aug '23

07 Aug '23

Name of user not set #1003058 has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44302 ) Change subject: mb/lenovo/thinkcentre_m91p add ThinkCentre M91p ...................................................................... mb/lenovo/thinkcentre_m91p add ThinkCentre M91p Add mainboard for ThinkCentre M91p, this port was generated with autoport. This is an OEM board with a Macronix MX25L6406E flash chip Working: - All DIMM slots - libgfxinit - VGA - Flashing with flashrom Untested: - All USB Ports - All PCIe Ports - SATA Ports - Audio output - S3 suspend/resume - Intel GbE Issues: - Randomly hangs before and after a payload has chance to be loaded Signed-off-by: bengris32 <bengrisdale123(a)gmail.com> Change-Id: I48bf9093099abdece3b52d7169c000e25b400feb --- A src/mainboard/lenovo/thinkcentre_m91p/Kconfig A src/mainboard/lenovo/thinkcentre_m91p/Kconfig.name A src/mainboard/lenovo/thinkcentre_m91p/Makefile.inc A src/mainboard/lenovo/thinkcentre_m91p/acpi/ec.asl A src/mainboard/lenovo/thinkcentre_m91p/acpi/platform.asl A src/mainboard/lenovo/thinkcentre_m91p/acpi/superio.asl A src/mainboard/lenovo/thinkcentre_m91p/acpi_tables.c A src/mainboard/lenovo/thinkcentre_m91p/board_info.txt A src/mainboard/lenovo/thinkcentre_m91p/data.vbt A src/mainboard/lenovo/thinkcentre_m91p/devicetree.cb A src/mainboard/lenovo/thinkcentre_m91p/dsdt.asl A src/mainboard/lenovo/thinkcentre_m91p/early_init.c A src/mainboard/lenovo/thinkcentre_m91p/gma-mainboard.ads A src/mainboard/lenovo/thinkcentre_m91p/gpio.c A src/mainboard/lenovo/thinkcentre_m91p/hda_verb.c A src/mainboard/lenovo/thinkcentre_m91p/mainboard.c 16 files changed, 481 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/44302/1 diff --git a/src/mainboard/lenovo/thinkcentre_m91p/Kconfig b/src/mainboard/lenovo/thinkcentre_m91p/Kconfig new file mode 100644 index 0000000..07fc6cf --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/Kconfig @@ -0,0 +1,32 @@ +if BOARD_LENOVO_THINKCENTRE_M91P + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select MAINBOARD_HAS_LIBGFXINIT + select INTEL_GMA_HAVE_VBT + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select MAINBOARD_USES_IFD_GBE_REGION + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_BD82X6X + select USE_NATIVE_RAMINIT + +config MAINBOARD_DIR + string + default lenovo/thinkcentre_m91p + +config MAINBOARD_PART_NUMBER + string + default "ThinkCentre M91p" + +config DRAM_RESET_GATE_GPIO # FIXME: check this + int + default 10 + +config USBDEBUG_HCD_INDEX # FIXME: check this + int + default 2 +endif diff --git a/src/mainboard/lenovo/thinkcentre_m91p/Kconfig.name b/src/mainboard/lenovo/thinkcentre_m91p/Kconfig.name new file mode 100644 index 0000000..01956a6 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_LENOVO_THINKCENTRE_M91P + bool "ThinkCentre M91p" diff --git a/src/mainboard/lenovo/thinkcentre_m91p/Makefile.inc b/src/mainboard/lenovo/thinkcentre_m91p/Makefile.inc new file mode 100644 index 0000000..18391d8 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/Makefile.inc @@ -0,0 +1,5 @@ +bootblock-y += early_init.c +bootblock-y += gpio.c +romstage-y += early_init.c +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/lenovo/thinkcentre_m91p/acpi/ec.asl b/src/mainboard/lenovo/thinkcentre_m91p/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/acpi/ec.asl diff --git a/src/mainboard/lenovo/thinkcentre_m91p/acpi/platform.asl b/src/mainboard/lenovo/thinkcentre_m91p/acpi/platform.asl new file mode 100644 index 0000000..afb8abb --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/acpi/platform.asl @@ -0,0 +1,8 @@ +Method(_WAK, 1) +{ + Return(Package() {0, 0}) +} + +Method(_PTS, 1) +{ +} diff --git a/src/mainboard/lenovo/thinkcentre_m91p/acpi/superio.asl b/src/mainboard/lenovo/thinkcentre_m91p/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/acpi/superio.asl diff --git a/src/mainboard/lenovo/thinkcentre_m91p/acpi_tables.c b/src/mainboard/lenovo/thinkcentre_m91p/acpi_tables.c new file mode 100644 index 0000000..f8364ab --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/acpi_tables.c @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi_gnvs.h> +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(struct global_nvs *gnvs) +{ + /* The lid is open by default. */ + gnvs->lids = 1; + + /* Temperature at which OS will shutdown */ + gnvs->tcrt = 100; + /* Temperature at which OS will throttle CPU */ + gnvs->tpsv = 90; +} diff --git a/src/mainboard/lenovo/thinkcentre_m91p/board_info.txt b/src/mainboard/lenovo/thinkcentre_m91p/board_info.txt new file mode 100644 index 0000000..3353f8d --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/board_info.txt @@ -0,0 +1,2 @@ +Category: desktop +FIXME: check category, , put ROM package, ROM socketed, ROM protocol, Flashrom support, Release year diff --git a/src/mainboard/lenovo/thinkcentre_m91p/data.vbt b/src/mainboard/lenovo/thinkcentre_m91p/data.vbt new file mode 100644 index 0000000..73336f72 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/data.vbt Binary files differ diff --git a/src/mainboard/lenovo/thinkcentre_m91p/devicetree.cb b/src/mainboard/lenovo/thinkcentre_m91p/devicetree.cb new file mode 100644 index 0000000..7a7da62 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/devicetree.cb @@ -0,0 +1,105 @@ +chip northbridge/intel/sandybridge # FIXME: GPU registers may not always apply. + register "gfx" = "GMA_STATIC_DISPLAYS(0)" + register "gpu_cpu_backlight" = "0x00000000" + register "gpu_dp_b_hotplug" = "0" + register "gpu_dp_c_hotplug" = "0" + register "gpu_dp_d_hotplug" = "0" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "0" + register "gpu_panel_power_backlight_on_delay" = "0" + register "gpu_panel_power_cycle_delay" = "0" + register "gpu_panel_power_down_delay" = "0" + register "gpu_panel_power_up_delay" = "0" + register "gpu_pch_backlight" = "0x00000000" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on + end + device lapic 0xacac off + end + end + end + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x003c0a01" + register "gen2_dec" = "0x00000000" + register "gen3_dec" = "0x00000000" + register "gen4_dec" = "0x00000000" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x8" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x0" + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x17aa 0x3070 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 on # Intel Gigabit Ethernet + subsystemid 0x17aa 0x3070 + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x17aa 0x3070 + end + device pci 1b.0 on # High Definition Audio + subsystemid 0x17aa 0x3070 + end + device pci 1c.0 off # PCIe Port #1 + end + device pci 1c.1 off # PCIe Port #2 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x17aa 0x3070 + end + device pci 1e.0 on # PCI bridge + subsystemid 0x17aa 0x3070 + end + device pci 1f.0 on # LPC bridge + subsystemid 0x17aa 0x3070 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x17aa 0x3070 + end + device pci 1f.3 on # SMBus + subsystemid 0x17aa 0x3070 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x17aa 0x3070 + end + device pci 01.0 off # PEG + end + device pci 02.0 on # iGPU + subsystemid 0x17aa 0x3070 + end + end +end diff --git a/src/mainboard/lenovo/thinkcentre_m91p/dsdt.asl b/src/mainboard/lenovo/thinkcentre_m91p/dsdt.asl new file mode 100644 index 0000000..e648a99 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/dsdt.asl @@ -0,0 +1,28 @@ +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB + + +#include <acpi/acpi.h> + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, /* DSDT revision: ACPI 2.0 and up */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 /* OEM revision */ +) +{ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/common/acpi/platform.asl> + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/common/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/lenovo/thinkcentre_m91p/early_init.c b/src/mainboard/lenovo/thinkcentre_m91p/early_init.c new file mode 100644 index 0000000..e3facd4 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/early_init.c @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + + +#include <bootblock_common.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <device/pci.h> +#include <device/pci_def.h> + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void bootblock_mainboard_early_init(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f01); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); +} + +/* FIXME: Put proper SPD map here. */ +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x52, id_only); + read_spd(&spd[2], 0x51, id_only); + read_spd(&spd[3], 0x53, id_only); +} diff --git a/src/mainboard/lenovo/thinkcentre_m91p/gma-mainboard.ads b/src/mainboard/lenovo/thinkcentre_m91p/gma-mainboard.ads new file mode 100644 index 0000000..df757d1 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/gma-mainboard.ads @@ -0,0 +1,16 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + Analog, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/lenovo/thinkcentre_m91p/gpio.c b/src/mainboard/lenovo/thinkcentre_m91p/gpio.c new file mode 100644 index 0000000..fc6b035 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/gpio.c @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio11 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_NATIVE, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_NATIVE, + .gpio38 = GPIO_MODE_NATIVE, + .gpio39 = GPIO_MODE_NATIVE, + .gpio40 = GPIO_MODE_GPIO, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_NATIVE, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/lenovo/thinkcentre_m91p/hda_verb.c b/src/mainboard/lenovo/thinkcentre_m91p/hda_verb.c new file mode 100644 index 0000000..6786be0 --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/hda_verb.c @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0662, /* Codec Vendor / Device ID: Realtek */ + 0x17aa3070, /* Subsystem ID */ + 11, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x17aa3070), + AZALIA_PIN_CFG(0, 0x14, 0x01014010), + AZALIA_PIN_CFG(0, 0x15, 0x99130120), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x01a19840), + AZALIA_PIN_CFG(0, 0x19, 0x02a19850), + AZALIA_PIN_CFG(0, 0x1a, 0x0181304f), + AZALIA_PIN_CFG(0, 0x1b, 0x0221401f), + AZALIA_PIN_CFG(0, 0x1c, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x4004c601), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + + 0x80862805, /* Codec Vendor / Device ID: Intel */ + 0x17aa3070, /* Subsystem ID */ + 4, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(3, 0x17aa3070), + AZALIA_PIN_CFG(3, 0x05, 0x58560010), + AZALIA_PIN_CFG(3, 0x06, 0x18560020), + AZALIA_PIN_CFG(3, 0x07, 0x58560030), + +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkcentre_m91p/mainboard.c b/src/mainboard/lenovo/thinkcentre_m91p/mainboard.c new file mode 100644 index 0000000..e5cfebf --- /dev/null +++ b/src/mainboard/lenovo/thinkcentre_m91p/mainboard.c @@ -0,0 +1,15 @@ +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> + +static void mainboard_enable(struct device *dev) +{ + /* FIXME: fix these values. */ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; -- To view, visit https://review.coreboot.org/c/coreboot/+/44302 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I48bf9093099abdece3b52d7169c000e25b400feb Gerrit-Change-Number: 44302 Gerrit-PatchSet: 1 Gerrit-Owner: Name of user not set #1003058 Gerrit-MessageType: newchange

5 23

Change in coreboot[master]: soc/intel/baytrail: Start VBOOT in bootblock
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36874 ) Change subject: soc/intel/baytrail: Start VBOOT in bootblock ...................................................................... soc/intel/baytrail: Start VBOOT in bootblock The earlier the more that can be updated via RW fmap regions. Change-Id: Ifcaf6ad8e27c09fee99cf6a8b12f9fadcb0cef2c Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/mainboard/google/rambi/Makefile.inc M src/soc/intel/baytrail/Kconfig M src/soc/intel/baytrail/Makefile.inc M src/soc/intel/baytrail/pmutil.c 4 files changed, 9 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/36874/1 diff --git a/src/mainboard/google/rambi/Makefile.inc b/src/mainboard/google/rambi/Makefile.inc index 0e80b64..6660d23 100644 --- a/src/mainboard/google/rambi/Makefile.inc +++ b/src/mainboard/google/rambi/Makefile.inc @@ -13,6 +13,7 @@ ## GNU General Public License for more details. ## +verstage-$(CONFIG_CHROMEOS) += chromeos.c romstage-$(CONFIG_CHROMEOS) += chromeos.c ramstage-$(CONFIG_CHROMEOS) += chromeos.c ramstage-$(CONFIG_EC_GOOGLE_CHROMEEC) += ec.c diff --git a/src/soc/intel/baytrail/Kconfig b/src/soc/intel/baytrail/Kconfig index cfea93a..e4e8c30 100644 --- a/src/soc/intel/baytrail/Kconfig +++ b/src/soc/intel/baytrail/Kconfig @@ -41,11 +41,8 @@ config VBOOT select VBOOT_MUST_REQUEST_DISPLAY - select VBOOT_STARTS_IN_ROMSTAGE - -config BOOTBLOCK_CPU_INIT - string - default "soc/intel/baytrail/bootblock/bootblock.c" + select VBOOT_STARTS_IN_BOOTBLOCK + select VBOOT_SEPARATE_VERSTAGE config MMCONF_BASE_ADDRESS hex diff --git a/src/soc/intel/baytrail/Makefile.inc b/src/soc/intel/baytrail/Makefile.inc index eda3e25..d21f744 100644 --- a/src/soc/intel/baytrail/Makefile.inc +++ b/src/soc/intel/baytrail/Makefile.inc @@ -16,6 +16,8 @@ bootblock-y += ../../../cpu/x86/early_reset.S bootblock-y += bootblock/bootblock.c +verstage-y += pmutil.c + romstage-y += iosf.c romstage-y += memmap.c romstage-y += pmutil.c diff --git a/src/soc/intel/baytrail/pmutil.c b/src/soc/intel/baytrail/pmutil.c index 51174fc..2d14d84 100644 --- a/src/soc/intel/baytrail/pmutil.c +++ b/src/soc/intel/baytrail/pmutil.c @@ -368,7 +368,10 @@ { uint32_t gen_pmcon1; int rtc_fail; - struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE); + struct chipset_power_state *ps = NULL; + + if (ENV_RAMSTAGE) + ps = cbmem_find(CBMEM_ID_POWER_STATE); if (ps != NULL) gen_pmcon1 = ps->gen_pmcon1; -- To view, visit https://review.coreboot.org/c/coreboot/+/36874 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ifcaf6ad8e27c09fee99cf6a8b12f9fadcb0cef2c Gerrit-Change-Number: 36874 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

4 6

Change in coreboot[master]: mb/gigabyte/ga-g41m-es2l: Prepare for a variant
by Arthur Heymans (Code Review) 07 Aug '23

07 Aug '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41867 ) Change subject: mb/gigabyte/ga-g41m-es2l: Prepare for a variant ...................................................................... mb/gigabyte/ga-g41m-es2l: Prepare for a variant To ease the review of adding a variant (ga-g41m-combo) move a few things around without yet adding the variant. Change-Id: I0b22731849e157b76be97dbe02a7538f1cea472d Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/mainboard/gigabyte/ga-g41m-es2l/Kconfig M src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc M src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb M src/mainboard/gigabyte/ga-g41m-es2l/early_init.c A src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h A src/mainboard/gigabyte/ga-g41m-es2l/superio.h R src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/gpio.c R src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/hda_verb.c A src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb A src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c 10 files changed, 166 insertions(+), 119 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/67/41867/1 diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig b/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig index fa6783d1..97f155a 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig +++ b/src/mainboard/gigabyte/ga-g41m-es2l/Kconfig @@ -7,7 +7,7 @@ select CPU_INTEL_SOCKET_LGA775 select NORTHBRIDGE_INTEL_X4X select SOUTHBRIDGE_INTEL_I82801GX - select SUPERIO_ITE_IT8718F + select SUPERIO_ITE_IT8718F if BOARD_GIGABYTE_GA_G41M_ES2L select HAVE_ACPI_TABLES select BOARD_ROMSIZE_KB_1024 select PCIEXP_ASPM @@ -24,9 +24,17 @@ string default "gigabyte/ga-g41m-es2l" +config VARIANT_DIR + string + default "ga-g41m-es2l" if BOARD_GIGABYTE_GA_G41M_ES2L + +config OVERRIDE_DEVICETREE + string + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" + config MAINBOARD_PART_NUMBER string - default "GA-G41M-ES2L" + default "GA-G41M-ES2L" if BOARD_GIGABYTE_GA_G41M_ES2L config MAX_CPUS int diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc b/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc index 4100476..cf8ce96 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc +++ b/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc @@ -1,7 +1,11 @@ ramstage-y += cstates.c -romstage-y += gpio.c bootblock-y += early_init.c romstage-y += early_init.c ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads + +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include +bootblock-y += variants/$(VARIANT_DIR)/superio.c +romstage-y += variants/$(VARIANT_DIR)/gpio.c +ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb index 6328bc6..bdeda72 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb +++ b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb @@ -68,79 +68,6 @@ device pci 1e.3 off end # AC'97 Modem device pci 1f.0 on # ISA bridge subsystemid 0x1458 0x5001 - chip superio/ite/it8718f # Super I/O - register "TMPIN1.mode" = "THERMAL_RESISTOR" - register "TMPIN2.mode" = "THERMAL_RESISTOR" - register "TMPIN3.mode" = "THERMAL_DIODE" - register "TMPIN3.offset" = "0" - register "ec.vin_mask" = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0" - - register "FAN1.mode" = "FAN_SMART_AUTOMATIC" - register "FAN1.smart.tmpin" = "3" - register "FAN1.smart.tmp_off" = "25" - register "FAN1.smart.tmp_start" = "30" - register "FAN1.smart.tmp_full" = "65" - register "FAN1.smart.tmp_delta" = "3" - register "FAN1.smart.smoothing" = "1" - register "FAN1.smart.pwm_start" = "0" - register "FAN1.smart.slope" = "10" - - register "FAN2.mode" = "FAN_SMART_AUTOMATIC" - register "FAN2.smart.tmpin" = "3" - register "FAN2.smart.tmp_off" = "25" - register "FAN2.smart.tmp_start" = "30" - register "FAN2.smart.tmp_full" = "65" - register "FAN2.smart.tmp_delta" = "3" - register "FAN2.smart.smoothing" = "1" - register "FAN2.smart.pwm_start" = "0" - register "FAN2.smart.slope" = "10" - - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - irq 0xf0 = 0x00 - irq 0xf1 = 0x80 - end - device pnp 2e.1 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - io 0x62 = 0x000 - drq 0x74 = 4 - irq 0xf0 = 0x08 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - irq 0x70 = 0x00 - io 0x62 = 0x000 - irq 0xf0 = 0x80 - irq 0xf1 = 0x00 - irq 0xf2 = 0x0a - irq 0xf3 = 0x80 - irq 0xf4 = 0x00 - irq 0xf5 = 0x00 - irq 0xf6 = 0xff - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - irq 0x70 = 1 - io 0x62 = 0x64 - irq 0xf0 = 0x48 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - irq 0x71 = 2 - irq 0xf0 = 0 - end - end end device pci 1f.1 on # PATA/IDE subsystemid 0x1458 0xb004 diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c b/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c index 4b0ea16..c204070 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c +++ b/src/mainboard/gigabyte/ga-g41m-es2l/early_init.c @@ -4,12 +4,7 @@ #include <device/pci_ops.h> #include <southbridge/intel/i82801gx/i82801gx.h> #include <northbridge/intel/x4x/x4x.h> -#include <superio/ite/it8718f/it8718f.h> -#include <superio/ite/common/ite.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) -#define EC_DEV PNP_DEV(0x2e, IT8718F_EC) +#include <mainboard/superio.h> /* Early mainboard specific GPIO setup. * We should use standard gpio.h eventually @@ -17,43 +12,7 @@ void bootblock_mainboard_early_init(void) { - /* Set default GPIOs on superio */ - ite_reg_write(GPIO_DEV, 0x25, 0x00); - ite_reg_write(GPIO_DEV, 0x26, 0xc7); - ite_reg_write(GPIO_DEV, 0x27, 0x80); - ite_reg_write(GPIO_DEV, 0x28, 0x41); - ite_reg_write(GPIO_DEV, 0x29, 0x0a); - ite_reg_write(GPIO_DEV, 0x2c, 0x01); - ite_reg_write(GPIO_DEV, 0x62, 0x08); - ite_reg_write(GPIO_DEV, 0x72, 0x00); - ite_reg_write(GPIO_DEV, 0x73, 0x00); - ite_reg_write(GPIO_DEV, 0xb8, 0x00); - ite_reg_write(GPIO_DEV, 0xbb, 0x40); - ite_reg_write(GPIO_DEV, 0xc0, 0x00); - ite_reg_write(GPIO_DEV, 0xc1, 0xc7); - ite_reg_write(GPIO_DEV, 0xc2, 0x80); - ite_reg_write(GPIO_DEV, 0xc3, 0x01); - ite_reg_write(GPIO_DEV, 0xc4, 0x0a); - ite_reg_write(GPIO_DEV, 0xc8, 0x00); - ite_reg_write(GPIO_DEV, 0xc9, 0x04); - ite_reg_write(GPIO_DEV, 0xcb, 0x00); - ite_reg_write(GPIO_DEV, 0xcc, 0x02); - ite_reg_write(GPIO_DEV, 0xf0, 0x10); - ite_reg_write(GPIO_DEV, 0xf1, 0x40); - ite_reg_write(GPIO_DEV, 0xf6, 0x26); - ite_reg_write(GPIO_DEV, 0xfc, 0x52); - - ite_reg_write(EC_DEV, 0xf0, 0x80); - ite_reg_write(EC_DEV, 0xf1, 0x00); - ite_reg_write(EC_DEV, 0xf2, 0x0a); - ite_reg_write(EC_DEV, 0xf3, 0x80); - ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9 - ite_reg_write(EC_DEV, 0x30, 0x01); // Enable - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - /* Disable SIO reboot */ - ite_reg_write(GPIO_DEV, 0xEF, 0x7E); + mainboard_early_superio(); /* IRQ routing */ RCBA32(D31IP) = 0x00002210; diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h b/src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h new file mode 100644 index 0000000..ddc7d04 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/include/mainboard/superio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO +#define MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO + +void mainboard_early_superio(void); + +#endif diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/superio.h b/src/mainboard/gigabyte/ga-g41m-es2l/superio.h new file mode 100644 index 0000000..62bf591 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/superio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifdef MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO +#define MAINBOARD_GIGABYTE_GA_G41M_ES2l_SUPERIO + + + +#endif diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/gpio.c b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/gpio.c similarity index 100% rename from src/mainboard/gigabyte/ga-g41m-es2l/gpio.c rename to src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/gpio.c diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/hda_verb.c b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/hda_verb.c similarity index 100% rename from src/mainboard/gigabyte/ga-g41m-es2l/hda_verb.c rename to src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/hda_verb.c diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb new file mode 100644 index 0000000..f481195 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/overridetree.cb @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +chip northbridge/intel/x4x # Northbridge + device domain 0 on # PCI domain + chip southbridge/intel/i82801gx # Southbridge + device pci 1f.0 on # ISA bridge + subsystemid 0x1458 0x5001 + chip superio/ite/it8718f # Super I/O + register "TMPIN1.mode" = "THERMAL_RESISTOR" + register "TMPIN2.mode" = "THERMAL_RESISTOR" + register "TMPIN3.mode" = "THERMAL_DIODE" + register "TMPIN3.offset" = "0" + register "ec.vin_mask" = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0" + + register "FAN1.mode" = "FAN_SMART_AUTOMATIC" + register "FAN1.smart.tmpin" = "3" + register "FAN1.smart.tmp_off" = "25" + register "FAN1.smart.tmp_start" = "30" + register "FAN1.smart.tmp_full" = "65" + register "FAN1.smart.tmp_delta" = "3" + register "FAN1.smart.smoothing" = "1" + register "FAN1.smart.pwm_start" = "0" + register "FAN1.smart.slope" = "10" + + register "FAN2.mode" = "FAN_SMART_AUTOMATIC" + register "FAN2.smart.tmpin" = "3" + register "FAN2.smart.tmp_off" = "25" + register "FAN2.smart.tmp_start" = "30" + register "FAN2.smart.tmp_full" = "65" + register "FAN2.smart.tmp_delta" = "3" + register "FAN2.smart.smoothing" = "1" + register "FAN2.smart.pwm_start" = "0" + register "FAN2.smart.slope" = "10" + + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + irq 0xf0 = 0x00 + irq 0xf1 = 0x80 + end + device pnp 2e.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + io 0x62 = 0x000 + drq 0x74 = 4 + irq 0xf0 = 0x08 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + irq 0x70 = 0x00 + io 0x62 = 0x000 + irq 0xf0 = 0x80 + irq 0xf1 = 0x00 + irq 0xf2 = 0x0a + irq 0xf3 = 0x80 + irq 0xf4 = 0x00 + irq 0xf5 = 0x00 + irq 0xf6 = 0xff + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + irq 0x70 = 1 + io 0x62 = 0x64 + irq 0xf0 = 0x48 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + irq 0x71 = 2 + irq 0xf0 = 0 + end + end + end + end + end +end diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c new file mode 100644 index 0000000..c759532 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/variants/ga-g41m-es2l/superio.c @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include <mainboard/superio.h> +#include <superio/ite/it8718f/it8718f.h> +#include <superio/ite/common/ite.h> + +#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) +#define EC_DEV PNP_DEV(0x2e, IT8718F_EC) + +void mainboard_early_superio(void) +{ + /* Set default GPIOs on superio */ + ite_reg_write(GPIO_DEV, 0x25, 0x00); + ite_reg_write(GPIO_DEV, 0x26, 0xc7); + ite_reg_write(GPIO_DEV, 0x27, 0x80); + ite_reg_write(GPIO_DEV, 0x28, 0x41); + ite_reg_write(GPIO_DEV, 0x29, 0x0a); + ite_reg_write(GPIO_DEV, 0x2c, 0x01); + ite_reg_write(GPIO_DEV, 0x62, 0x08); + ite_reg_write(GPIO_DEV, 0x72, 0x00); + ite_reg_write(GPIO_DEV, 0x73, 0x00); + ite_reg_write(GPIO_DEV, 0xb8, 0x00); + ite_reg_write(GPIO_DEV, 0xbb, 0x40); + ite_reg_write(GPIO_DEV, 0xc0, 0x00); + ite_reg_write(GPIO_DEV, 0xc1, 0xc7); + ite_reg_write(GPIO_DEV, 0xc2, 0x80); + ite_reg_write(GPIO_DEV, 0xc3, 0x01); + ite_reg_write(GPIO_DEV, 0xc4, 0x0a); + ite_reg_write(GPIO_DEV, 0xc8, 0x00); + ite_reg_write(GPIO_DEV, 0xc9, 0x04); + ite_reg_write(GPIO_DEV, 0xcb, 0x00); + ite_reg_write(GPIO_DEV, 0xcc, 0x02); + ite_reg_write(GPIO_DEV, 0xf0, 0x10); + ite_reg_write(GPIO_DEV, 0xf1, 0x40); + ite_reg_write(GPIO_DEV, 0xf6, 0x26); + ite_reg_write(GPIO_DEV, 0xfc, 0x52); + + ite_reg_write(EC_DEV, 0xf0, 0x80); + ite_reg_write(EC_DEV, 0xf1, 0x00); + ite_reg_write(EC_DEV, 0xf2, 0x0a); + ite_reg_write(EC_DEV, 0xf3, 0x80); + ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9 + ite_reg_write(EC_DEV, 0x30, 0x01); // Enable + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + /* Disable SIO reboot */ + ite_reg_write(GPIO_DEV, 0xEF, 0x7E); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/41867 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0b22731849e157b76be97dbe02a7538f1cea472d Gerrit-Change-Number: 41867 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: The .config is overwritten when added to coreboot.rom via CBFS at the...
by Jeremy Jackson (Code Review) 07 Aug '23

07 Aug '23

Jeremy Jackson has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42028 ) Change subject: The .config is overwritten when added to coreboot.rom via CBFS at the end of the build (if you choose that option)... should this be a separate file for each of fallback and normal? Since there can be two different versions and/or configurations, would fallback/config and normal/config make more sense? Also the "revision" file might benefit from similar treatment. ...................................................................... The .config is overwritten when added to coreboot.rom via CBFS at the end of the build (if you choose that option)... should this be a separate file for each of fallback and normal? Since there can be two different versions and/or configurations, would fallback/config and normal/config make more sense? Also the "revision" file might benefit from similar treatment. Signed-off-by: Jeremy Jackson <jerj(a)coplanar.net> Change-Id: I3e904e44137f731f239f51dbf224965f33838e19 --- M Makefile.inc 1 file changed, 6 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/28/42028/1 diff --git a/Makefile.inc b/Makefile.inc index 86467a6..b547f11 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -1195,13 +1195,13 @@ vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE) vgaroms/seavgabios.bin-type := raw -cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += config -config-file := $(DOTCONFIG):defconfig -config-type := raw +cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += $(CONFIG_CBFS_PREFIX)/config +$(CONFIG_CBFS_PREFIX)/config-file := $(DOTCONFIG):defconfig +$(CONFIG_CBFS_PREFIX)/config-type := raw -cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += revision -revision-file := $(obj)/build.h -revision-type := raw +cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += $(CONFIG_CBFS_PREFIX)/revision +$(CONFIG_CBFS_PREFIX)/revision-file := $(obj)/build.h +$(CONFIG_CBFS_PREFIX)/revision-type := raw BOOTSPLASH_SUFFIX=$(suffix $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))) cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash$(BOOTSPLASH_SUFFIX) -- To view, visit https://review.coreboot.org/c/coreboot/+/42028 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3e904e44137f731f239f51dbf224965f33838e19 Gerrit-Change-Number: 42028 Gerrit-PatchSet: 1 Gerrit-Owner: Jeremy Jackson <jerj(a)coplanar.net> Gerrit-MessageType: newchange

7 14

Change in coreboot[master]: WIP: Hash RAM contents on S3 entry and verify on S3 resume
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42890 ) Change subject: WIP: Hash RAM contents on S3 entry and verify on S3 resume ...................................................................... WIP: Hash RAM contents on S3 entry and verify on S3 resume I used murmur3 since it's supposed to be fast. Though I don't think the license is really compatible. The ram_hash code still needs some refactoring to reduce duplication and to add the ability to handle unaligned blocks. BUG=b:159081993 TEST=Boot trembyle and see no verification failures. Signed-off-by: Raul E Rangel <rrangel(a)chromium.org> Change-Id: I6b38facba17bdd57a94987cfb49e71067ff8b769 --- M Makefile.inc M src/arch/x86/acpi_s3.c A src/include/murmur3.h A src/include/ram_hash.h M src/lib/Makefile.inc A src/lib/murmur3.c A src/lib/ram_hash.c M src/soc/amd/picasso/chip.c M src/soc/amd/picasso/memlayout.ld M src/soc/amd/picasso/smihandler.c 10 files changed, 595 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/42890/1 diff --git a/Makefile.inc b/Makefile.inc index 86335d9..b7020e8 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -410,8 +410,8 @@ CFLAGS_common += -Wwrite-strings -Wredundant-decls -Wno-trigraphs -Wimplicit-fallthrough CFLAGS_common += -Wstrict-aliasing -Wshadow -Wdate-time -Wtype-limits -Wvla CFLAGS_common += -Wlogical-op -Wduplicated-cond -Wdangling-else -CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer -CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie +CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fmit-frame-pointer +CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie -Wno-implicit-fallthrough ifeq ($(CONFIG_COMPILER_GCC),y) # Don't add these GCC specific flags when running scan-build ifeq ($(CCC_ANALYZER_OUTPUT_FORMAT),) diff --git a/src/arch/x86/acpi_s3.c b/src/arch/x86/acpi_s3.c index d4c697e..9c209b2 100644 --- a/src/arch/x86/acpi_s3.c +++ b/src/arch/x86/acpi_s3.c @@ -9,6 +9,7 @@ #include <cpu/x86/smm.h> #include <fallback.h> #include <timestamp.h> +#include <ram_hash.h> #include <romstage_handoff.h> #if ENV_RAMSTAGE || ENV_POSTCAR @@ -70,6 +71,8 @@ timestamp_add_now(TS_ACPI_WAKE_JUMP); + verify_ram(); + acpi_do_wakeup((uintptr_t)vector); } diff --git a/src/include/murmur3.h b/src/include/murmur3.h new file mode 100644 index 0000000..138f87f --- /dev/null +++ b/src/include/murmur3.h @@ -0,0 +1,29 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the +// public domain. The author hereby disclaims copyright to this source +// code. + +#ifndef _MURMURHASH3_H_ +#define _MURMURHASH3_H_ + +#include <stdint.h> + +#ifdef __cplusplus +extern "C" { +#endif + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 (const void *key, int len, uint32_t seed, uint32_t *out); + +void MurmurHash3_x86_128(const void *key, int len, uint32_t seed, void *out); + +void MurmurHash3_x64_128(const void *key, int len, uint32_t seed, void *out); + +//----------------------------------------------------------------------------- + +#ifdef __cplusplus +} +#endif + +#endif // _MURMURHASH3_H_ diff --git a/src/include/ram_hash.h b/src/include/ram_hash.h new file mode 100644 index 0000000..67eaa76 --- /dev/null +++ b/src/include/ram_hash.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef RAM_HASH_H +#define RAM_HASH_H + +void hash_ram(void); +void verify_ram(void); + +#endif /* RAM_HASH_H */ diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index e0003bd..5bf0df2 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -145,6 +145,10 @@ ramstage-y += imd_cbmem.c ramstage-y += imd.c +bootblock-y += ram_hash.c crc32.c murmur3.c +ramstage-y += ram_hash.c crc32.c murmur3.c +smm-y += ram_hash.c crc32.c murmur3.c + postcar-$(CONFIG_VENDOR_EMULATION) += ramdetect.c postcar-y += cbmem_common.c postcar-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c diff --git a/src/lib/murmur3.c b/src/lib/murmur3.c new file mode 100644 index 0000000..f2b6b18 --- /dev/null +++ b/src/lib/murmur3.c @@ -0,0 +1,314 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the public +// domain. The author hereby disclaims copyright to this source code. + +// Note - The x86 and x64 versions do _not_ produce the same results, as the +// algorithms are optimized for their respective platforms. You can still +// compile and run any of them on any platform, but your performance with the +// non-native version will be less than optimal. + +#include "murmur3.h" + +//----------------------------------------------------------------------------- +// Platform-specific functions and macros + +#ifdef __GNUC__ +#define FORCE_INLINE __attribute__((always_inline)) inline +#else +#define FORCE_INLINE inline +#endif + +static FORCE_INLINE uint32_t rotl32 ( uint32_t x, int8_t r ) +{ + return (x << r) | (x >> (32 - r)); +} + +static FORCE_INLINE uint64_t rotl64 ( uint64_t x, int8_t r ) +{ + return (x << r) | (x >> (64 - r)); +} + +#define ROTL32(x,y) rotl32(x,y) +#define ROTL64(x,y) rotl64(x,y) + +#define BIG_CONSTANT(x) (x##LLU) + +//----------------------------------------------------------------------------- +// Block read - if your platform needs to do endian-swapping or can only +// handle aligned reads, do the conversion here + +#define getblock(p, i) (p[i]) + +//----------------------------------------------------------------------------- +// Finalization mix - force all bits of a hash block to avalanche + +static FORCE_INLINE uint32_t fmix32 ( uint32_t h ) +{ + h ^= h >> 16; + h *= 0x85ebca6b; + h ^= h >> 13; + h *= 0xc2b2ae35; + h ^= h >> 16; + + return h; +} + +//---------- + +static FORCE_INLINE uint64_t fmix64 ( uint64_t k ) +{ + k ^= k >> 33; + k *= BIG_CONSTANT(0xff51afd7ed558ccd); + k ^= k >> 33; + k *= BIG_CONSTANT(0xc4ceb9fe1a85ec53); + k ^= k >> 33; + + return k; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 ( const void * key, int len, + uint32_t seed, uint32_t * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 4; + int i; + + uint32_t h1 = seed; + + uint32_t c1 = 0xcc9e2d51; + uint32_t c2 = 0x1b873593; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*4); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i); + + k1 *= c1; + k1 = ROTL32(k1,15); + k1 *= c2; + + h1 ^= k1; + h1 = ROTL32(h1,13); + h1 = h1*5+0xe6546b64; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*4); + + uint32_t k1 = 0; + + switch(len & 3) + { + case 3: k1 ^= tail[2] << 16; + case 2: k1 ^= tail[1] << 8; + case 1: k1 ^= tail[0]; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; + + h1 = fmix32(h1); + + *(uint32_t*)out = h1; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_128 ( const void * key, const int len, + uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint32_t h1 = seed; + uint32_t h2 = seed; + uint32_t h3 = seed; + uint32_t h4 = seed; + + uint32_t c1 = 0x239b961b; + uint32_t c2 = 0xab0e9789; + uint32_t c3 = 0x38b34ae5; + uint32_t c4 = 0xa1e38b93; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*16); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i*4+0); + uint32_t k2 = getblock(blocks,i*4+1); + uint32_t k3 = getblock(blocks,i*4+2); + uint32_t k4 = getblock(blocks,i*4+3); + + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + + h1 = ROTL32(h1,19); h1 += h2; h1 = h1*5+0x561ccd1b; + + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + h2 = ROTL32(h2,17); h2 += h3; h2 = h2*5+0x0bcaa747; + + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + h3 = ROTL32(h3,15); h3 += h4; h3 = h3*5+0x96cd1c35; + + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + h4 = ROTL32(h4,13); h4 += h1; h4 = h4*5+0x32ac3b17; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint32_t k1 = 0; + uint32_t k2 = 0; + uint32_t k3 = 0; + uint32_t k4 = 0; + + switch(len & 15) + { + case 15: k4 ^= tail[14] << 16; + case 14: k4 ^= tail[13] << 8; + case 13: k4 ^= tail[12] << 0; + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + case 12: k3 ^= tail[11] << 24; + case 11: k3 ^= tail[10] << 16; + case 10: k3 ^= tail[ 9] << 8; + case 9: k3 ^= tail[ 8] << 0; + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + case 8: k2 ^= tail[ 7] << 24; + case 7: k2 ^= tail[ 6] << 16; + case 6: k2 ^= tail[ 5] << 8; + case 5: k2 ^= tail[ 4] << 0; + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + case 4: k1 ^= tail[ 3] << 24; + case 3: k1 ^= tail[ 2] << 16; + case 2: k1 ^= tail[ 1] << 8; + case 1: k1 ^= tail[ 0] << 0; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; h3 ^= len; h4 ^= len; + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + h1 = fmix32(h1); + h2 = fmix32(h2); + h3 = fmix32(h3); + h4 = fmix32(h4); + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + ((uint32_t*)out)[0] = h1; + ((uint32_t*)out)[1] = h2; + ((uint32_t*)out)[2] = h3; + ((uint32_t*)out)[3] = h4; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x64_128 ( const void * key, const int len, + const uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint64_t h1 = seed; + uint64_t h2 = seed; + + uint64_t c1 = BIG_CONSTANT(0x87c37b91114253d5); + uint64_t c2 = BIG_CONSTANT(0x4cf5ad432745937f); + + //---------- + // body + + const uint64_t * blocks = (const uint64_t *)(data); + + for(i = 0; i < nblocks; i++) + { + uint64_t k1 = getblock(blocks,i*2+0); + uint64_t k2 = getblock(blocks,i*2+1); + + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + + h1 = ROTL64(h1,27); h1 += h2; h1 = h1*5+0x52dce729; + + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + h2 = ROTL64(h2,31); h2 += h1; h2 = h2*5+0x38495ab5; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint64_t k1 = 0; + uint64_t k2 = 0; + + switch(len & 15) + { + case 15: k2 ^= (uint64_t)(tail[14]) << 48; + case 14: k2 ^= (uint64_t)(tail[13]) << 40; + case 13: k2 ^= (uint64_t)(tail[12]) << 32; + case 12: k2 ^= (uint64_t)(tail[11]) << 24; + case 11: k2 ^= (uint64_t)(tail[10]) << 16; + case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; + case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; + case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; + case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; + case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; + case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; + case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; + case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; + case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; + + h1 += h2; + h2 += h1; + + h1 = fmix64(h1); + h2 = fmix64(h2); + + h1 += h2; + h2 += h1; + + ((uint64_t*)out)[0] = h1; + ((uint64_t*)out)[1] = h2; +} + +//----------------------------------------------------------------------------- diff --git a/src/lib/ram_hash.c b/src/lib/ram_hash.c new file mode 100644 index 0000000..9f07183 --- /dev/null +++ b/src/lib/ram_hash.c @@ -0,0 +1,223 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <stdint.h> +#include <murmur3.h> +#include <ram_hash.h> +#include <string.h> +#include <lib.h> +#include <console/console.h> +#include <commonlib/bsd/helpers.h> + +#define HASH_BUFFER 0x2BD000 +#define EHASH_BUFFER 0x3BD000 +// extern char HASH_BUFFER[]; +// extern char EHASH_BUFFER[]; + +struct hash_range { + uintptr_t start; + uintptr_t end; + unsigned int block_size; + unsigned int diff; +}; + +struct hash_entry { + uint32_t hash; + uint32_t data[]; +}; + +struct hash_range mem_layout[] = { + { + .start = 0x1000, + .end = 0xa0000, + .block_size = 1 * KiB, + .diff = 1 + }, + { + .start = 0x3bd000, + .end = 0x3c0000, + .block_size = 4 * KiB, + .diff = 0 + }, + { + .start = 0x3c0000, + .end = 0xcc4c0000, + .block_size = 256 * KiB, + .diff = 0 + }, + { + .start = 0xcc4c0000, + .end = 0xcc51c000, + .block_size = 4 * KiB, + .diff = 0 + }, +}; + +static struct hash_entry *hash_range(const struct hash_range *range, struct hash_entry *entry, + size_t buffer_size) +{ + unsigned int total_blocks = (range->end - range->start) / range->block_size; + void *current; + unsigned int i; + + for (i = 0; i < total_blocks; ++i) { + current = (void *)(range->start + i * range->block_size); + + if (!(i % 256)) + printk(BIOS_DEBUG, "%s: block %u/%u @ %p\n", __func__, i, total_blocks, + current); + + // printk(BIOS_ERR, "%s: buffer_size: %zd\n", __func__, buffer_size); + + if (buffer_size < sizeof(*entry)) { + printk(BIOS_ERR, "%s: Hash buffer is too small for entry\n", __func__); + return NULL; + } + + // printk(BIOS_ERR, "%s: current: %p\n", __func__, current); + // printk(BIOS_ERR, "%s: current_entry: %p\n", __func__, entry); + + /* Allocate one entry in the buffer */ + buffer_size -= sizeof(*entry); + + MurmurHash3_x86_32(current, range->block_size, 0xDEADBEEF, &entry->hash); + // printk(BIOS_ERR, "%s: crc: %#x\n", __func__, entry->hash); + + if (range->diff) { + if (buffer_size < range->block_size) { + printk(BIOS_DEBUG, "%s: Hash buffer is too small for data\n", + __func__); + return NULL; + } + + /* Allocate diff size in buffer */ + buffer_size -= range->block_size; + memcpy(entry->data, current, range->block_size); + + entry = (struct hash_entry *)((uintptr_t)(entry + 1) + + range->block_size); + } else { + entry++; + } + // printk(BIOS_ERR, "%s: next_entry: %p\n", __func__, entry); + } + + return entry; +} + +void hash_ram(void) +{ + struct hash_entry *current_entry = (struct hash_entry *)HASH_BUFFER; + struct hash_range *range; + unsigned int i; + + printk(BIOS_INFO, "%s: Start: HASH_BUFFER: %#x, EHASH_BUFFER: %#x\n", __func__, + HASH_BUFFER, EHASH_BUFFER); + + for (i = 0; i < ARRAY_SIZE(mem_layout); ++i) { + range = &mem_layout[i]; + printk(BIOS_DEBUG, "%s: Hashing range %p -> %p\n", __func__, + (void *)range->start, (void *)range->end); + current_entry = + hash_range(range, current_entry, + ((uintptr_t)EHASH_BUFFER - (uintptr_t)current_entry)); + + if (!current_entry) { + printk(BIOS_ERR, "%s: Hash buffer is too small\n", __func__); + break; + } + } + + printk(BIOS_INFO, "%s: Done\n", __func__); +} + +static struct hash_entry *verify_range(const struct hash_range *range, struct hash_entry *entry, + size_t buffer_size) +{ + unsigned int total_blocks = (range->end - range->start) / range->block_size; + void *current; + unsigned int i; + uint32_t crc; + + for (i = 0; i < total_blocks; ++i) { + current = (void *)(range->start + i * range->block_size); + + if (!(i % 256)) + printk(BIOS_DEBUG, "%s: block %u/%u @ %p\n", __func__, i, total_blocks, + current); + + // printk(BIOS_ERR, "%s: buffer_size: %zd\n", __func__, buffer_size); + + if (buffer_size < sizeof(*entry)) { + printk(BIOS_ERR, "%s: Hash buffer is too small for entry\n", __func__); + return NULL; + } + + // printk(BIOS_ERR, "%s: current: %p\n", __func__, current); + // printk(BIOS_ERR, "%s: current_entry: %p\n", __func__, entry); + + /* Allocate one entry in the buffer */ + buffer_size -= sizeof(*entry); + + MurmurHash3_x86_32(current, range->block_size, 0xDEADBEEF, &crc); + // printk(BIOS_ERR, "%s: crc: %#x\n", __func__, entry->hash); + + if (crc != entry->hash) { + printk(BIOS_ERR, "%s: crc error at %p. %x != %x\n", __func__, current, + crc, entry->hash); + } + + if (range->diff) { + if (buffer_size < range->block_size) { + printk(BIOS_DEBUG, "%s: Hash buffer is too small for data\n", + __func__); + return NULL; + } + + /* Allocate diff size in buffer */ + buffer_size -= range->block_size; + + if (crc != entry->hash) { + + printk(BIOS_ERR, "Expected:\n"); + hexdump(entry->data, range->block_size); + + printk(BIOS_ERR, "Actual:\n"); + hexdump(current, range->block_size); + } + + entry = (struct hash_entry *)((uintptr_t)(entry + 1) + + range->block_size); + } else { + entry++; + } + // printk(BIOS_ERR, "%s: next_entry: %p\n", __func__, entry); + } + + return entry; +} + +void verify_ram() +{ + struct hash_entry *current_entry = (struct hash_entry *)HASH_BUFFER; + struct hash_range *range; + unsigned int i; + + printk(BIOS_INFO, "%s: Start: HASH_BUFFER: %#x, EHASH_BUFFER: %#x\n", __func__, + HASH_BUFFER, EHASH_BUFFER); + + for (i = 0; i < ARRAY_SIZE(mem_layout); ++i) { + range = &mem_layout[i]; + printk(BIOS_DEBUG, "%s: Verifying range %p -> %p\n", __func__, + (void *)range->start, (void *)range->end); + current_entry = + verify_range(range, current_entry, + ((uintptr_t)EHASH_BUFFER - (uintptr_t)current_entry)); + + if (!current_entry) { + printk(BIOS_ERR, "%s: Hash buffer is too small\n", __func__); + break; + } + } + + printk(BIOS_INFO, "%s: Done\n", __func__); +} diff --git a/src/soc/amd/picasso/chip.c b/src/soc/amd/picasso/chip.c index 2abe54e..678ce03 100644 --- a/src/soc/amd/picasso/chip.c +++ b/src/soc/amd/picasso/chip.c @@ -14,6 +14,7 @@ #include <soc/southbridge.h> #include "chip.h" #include <fsp/api.h> +#include <ram_hash.h> /* Supplied by i2c.c */ extern struct device_operations picasso_i2c_mmio_ops; @@ -184,6 +185,7 @@ static void picasso_os_entry(void *unused) { picasso_disable_paging(NULL); + verify_ram(); } struct chip_operations soc_amd_picasso_ops = { diff --git a/src/soc/amd/picasso/memlayout.ld b/src/soc/amd/picasso/memlayout.ld index 27c72a2..a128019 100644 --- a/src/soc/amd/picasso/memlayout.ld +++ b/src/soc/amd/picasso/memlayout.ld @@ -92,6 +92,7 @@ REGION(pagetables, CONFIG_PAGE_TABLE_ADDR, 4096 * 12, 8) REGION(pdpt, ., 32, 32) + REGION(hash_buffer, 0x2BD000, 1M, 4) EARLY_RESERVED_DRAM_END(.) RAMSTAGE(CONFIG_RAMBASE, 8M) diff --git a/src/soc/amd/picasso/smihandler.c b/src/soc/amd/picasso/smihandler.c index 992dc2b..616f116 100644 --- a/src/soc/amd/picasso/smihandler.c +++ b/src/soc/amd/picasso/smihandler.c @@ -3,6 +3,7 @@ #include <arch/io.h> #include <console/console.h> #include <cpu/x86/smm.h> +#include <ram_hash.h> #include <cpu/x86/cache.h> #include <cpu/amd/amd64_save_state.h> #include <acpi/acpi.h> @@ -144,6 +145,13 @@ printk(BIOS_SPEW, "SMI#: SLP = 0x%04x\n", pm1cnt); slp_typ = acpi_sleep_from_pm1(pm1cnt); + /* + * Hash RAM as soon as we know we are entering S3 to catch any problems + * caused by the SMM handler, PSP, or SMU. + */ + if (slp_typ == ACPI_S3) + hash_ram(); + /* Do any mainboard sleep handling */ mainboard_smi_sleep(slp_typ); -- To view, visit https://review.coreboot.org/c/coreboot/+/42890 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6b38facba17bdd57a94987cfb49e71067ff8b769 Gerrit-Change-Number: 42890 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 8

Change in coreboot[master]: WIP: lib: Add murmur3 algorithm for RAM hash
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43301 ) Change subject: WIP: lib: Add murmur3 algorithm for RAM hash ...................................................................... WIP: lib: Add murmur3 algorithm for RAM hash This is the murmur3 algorithm from https://github.com/PeterScott/murmur3. I'm not sure we can even include this since it's public domain. We might need to use another hash algorithm. I picked it because it's supposed to be fast. I didn't cleanup the code at all. This is why -Wno-implicit-fallthrough was added to the CFLAGS. BUG=b:159081993 TEST=Suspend trembyle and see hashes being generated. Signed-off-by: Raul E Rangel <rrangel(a)chromium.org> Change-Id: I9dfd371c67966bf7a342fdb5562445e63afce664 --- M Makefile.inc A src/include/murmur3.h M src/lib/Kconfig M src/lib/Makefile.inc A src/lib/murmur3.c A src/lib/ram_hash_murmur.c 6 files changed, 362 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/01/43301/1 diff --git a/Makefile.inc b/Makefile.inc index 89bb3e4..9b39b39 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -421,7 +421,7 @@ CFLAGS_common += -Wstrict-aliasing -Wshadow -Wdate-time -Wtype-limits -Wvla CFLAGS_common += -Wlogical-op -Wduplicated-cond -Wdangling-else CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer -CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie +CFLAGS_common += -ffunction-sections -fdata-sections -fno-pie -Wno-implicit-fallthrough ifeq ($(CONFIG_COMPILER_GCC),y) # Don't add these GCC specific flags when running scan-build ifeq ($(CCC_ANALYZER_OUTPUT_FORMAT),) diff --git a/src/include/murmur3.h b/src/include/murmur3.h new file mode 100644 index 0000000..138f87f --- /dev/null +++ b/src/include/murmur3.h @@ -0,0 +1,29 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the +// public domain. The author hereby disclaims copyright to this source +// code. + +#ifndef _MURMURHASH3_H_ +#define _MURMURHASH3_H_ + +#include <stdint.h> + +#ifdef __cplusplus +extern "C" { +#endif + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 (const void *key, int len, uint32_t seed, uint32_t *out); + +void MurmurHash3_x86_128(const void *key, int len, uint32_t seed, void *out); + +void MurmurHash3_x64_128(const void *key, int len, uint32_t seed, void *out); + +//----------------------------------------------------------------------------- + +#ifdef __cplusplus +} +#endif + +#endif // _MURMURHASH3_H_ diff --git a/src/lib/Kconfig b/src/lib/Kconfig index 8eeceec..0e4fa88 100644 --- a/src/lib/Kconfig +++ b/src/lib/Kconfig @@ -111,6 +111,8 @@ depends on ENABLE_RAM_HASH help The hash algorithm to use for RAM hash. -# TODO: Add algorithms + +config RAM_HASH_ALGO_MURMUR3 + bool "murmur3" endchoice diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 05df3c6..54b23e2 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -148,6 +148,9 @@ ramstage-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c smm-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c +ramstage-$(CONFIG_RAM_HASH_ALGO_MURMUR3) += ram_hash_murmur.c murmur3.c +smm-$(CONFIG_RAM_HASH_ALGO_MURMUR3) += ram_hash_murmur.c murmur3.c + postcar-$(CONFIG_VENDOR_EMULATION) += ramdetect.c postcar-y += cbmem_common.c postcar-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c diff --git a/src/lib/murmur3.c b/src/lib/murmur3.c new file mode 100644 index 0000000..f2b6b18 --- /dev/null +++ b/src/lib/murmur3.c @@ -0,0 +1,314 @@ +//----------------------------------------------------------------------------- +// MurmurHash3 was written by Austin Appleby, and is placed in the public +// domain. The author hereby disclaims copyright to this source code. + +// Note - The x86 and x64 versions do _not_ produce the same results, as the +// algorithms are optimized for their respective platforms. You can still +// compile and run any of them on any platform, but your performance with the +// non-native version will be less than optimal. + +#include "murmur3.h" + +//----------------------------------------------------------------------------- +// Platform-specific functions and macros + +#ifdef __GNUC__ +#define FORCE_INLINE __attribute__((always_inline)) inline +#else +#define FORCE_INLINE inline +#endif + +static FORCE_INLINE uint32_t rotl32 ( uint32_t x, int8_t r ) +{ + return (x << r) | (x >> (32 - r)); +} + +static FORCE_INLINE uint64_t rotl64 ( uint64_t x, int8_t r ) +{ + return (x << r) | (x >> (64 - r)); +} + +#define ROTL32(x,y) rotl32(x,y) +#define ROTL64(x,y) rotl64(x,y) + +#define BIG_CONSTANT(x) (x##LLU) + +//----------------------------------------------------------------------------- +// Block read - if your platform needs to do endian-swapping or can only +// handle aligned reads, do the conversion here + +#define getblock(p, i) (p[i]) + +//----------------------------------------------------------------------------- +// Finalization mix - force all bits of a hash block to avalanche + +static FORCE_INLINE uint32_t fmix32 ( uint32_t h ) +{ + h ^= h >> 16; + h *= 0x85ebca6b; + h ^= h >> 13; + h *= 0xc2b2ae35; + h ^= h >> 16; + + return h; +} + +//---------- + +static FORCE_INLINE uint64_t fmix64 ( uint64_t k ) +{ + k ^= k >> 33; + k *= BIG_CONSTANT(0xff51afd7ed558ccd); + k ^= k >> 33; + k *= BIG_CONSTANT(0xc4ceb9fe1a85ec53); + k ^= k >> 33; + + return k; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_32 ( const void * key, int len, + uint32_t seed, uint32_t * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 4; + int i; + + uint32_t h1 = seed; + + uint32_t c1 = 0xcc9e2d51; + uint32_t c2 = 0x1b873593; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*4); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i); + + k1 *= c1; + k1 = ROTL32(k1,15); + k1 *= c2; + + h1 ^= k1; + h1 = ROTL32(h1,13); + h1 = h1*5+0xe6546b64; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*4); + + uint32_t k1 = 0; + + switch(len & 3) + { + case 3: k1 ^= tail[2] << 16; + case 2: k1 ^= tail[1] << 8; + case 1: k1 ^= tail[0]; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; + + h1 = fmix32(h1); + + *(uint32_t*)out = h1; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x86_128 ( const void * key, const int len, + uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint32_t h1 = seed; + uint32_t h2 = seed; + uint32_t h3 = seed; + uint32_t h4 = seed; + + uint32_t c1 = 0x239b961b; + uint32_t c2 = 0xab0e9789; + uint32_t c3 = 0x38b34ae5; + uint32_t c4 = 0xa1e38b93; + + //---------- + // body + + const uint32_t * blocks = (const uint32_t *)(data + nblocks*16); + + for(i = -nblocks; i; i++) + { + uint32_t k1 = getblock(blocks,i*4+0); + uint32_t k2 = getblock(blocks,i*4+1); + uint32_t k3 = getblock(blocks,i*4+2); + uint32_t k4 = getblock(blocks,i*4+3); + + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + + h1 = ROTL32(h1,19); h1 += h2; h1 = h1*5+0x561ccd1b; + + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + h2 = ROTL32(h2,17); h2 += h3; h2 = h2*5+0x0bcaa747; + + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + h3 = ROTL32(h3,15); h3 += h4; h3 = h3*5+0x96cd1c35; + + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + h4 = ROTL32(h4,13); h4 += h1; h4 = h4*5+0x32ac3b17; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint32_t k1 = 0; + uint32_t k2 = 0; + uint32_t k3 = 0; + uint32_t k4 = 0; + + switch(len & 15) + { + case 15: k4 ^= tail[14] << 16; + case 14: k4 ^= tail[13] << 8; + case 13: k4 ^= tail[12] << 0; + k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; + + case 12: k3 ^= tail[11] << 24; + case 11: k3 ^= tail[10] << 16; + case 10: k3 ^= tail[ 9] << 8; + case 9: k3 ^= tail[ 8] << 0; + k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; + + case 8: k2 ^= tail[ 7] << 24; + case 7: k2 ^= tail[ 6] << 16; + case 6: k2 ^= tail[ 5] << 8; + case 5: k2 ^= tail[ 4] << 0; + k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; + + case 4: k1 ^= tail[ 3] << 24; + case 3: k1 ^= tail[ 2] << 16; + case 2: k1 ^= tail[ 1] << 8; + case 1: k1 ^= tail[ 0] << 0; + k1 *= c1; k1 = ROTL32(k1,15); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; h3 ^= len; h4 ^= len; + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + h1 = fmix32(h1); + h2 = fmix32(h2); + h3 = fmix32(h3); + h4 = fmix32(h4); + + h1 += h2; h1 += h3; h1 += h4; + h2 += h1; h3 += h1; h4 += h1; + + ((uint32_t*)out)[0] = h1; + ((uint32_t*)out)[1] = h2; + ((uint32_t*)out)[2] = h3; + ((uint32_t*)out)[3] = h4; +} + +//----------------------------------------------------------------------------- + +void MurmurHash3_x64_128 ( const void * key, const int len, + const uint32_t seed, void * out ) +{ + const uint8_t * data = (const uint8_t*)key; + const int nblocks = len / 16; + int i; + + uint64_t h1 = seed; + uint64_t h2 = seed; + + uint64_t c1 = BIG_CONSTANT(0x87c37b91114253d5); + uint64_t c2 = BIG_CONSTANT(0x4cf5ad432745937f); + + //---------- + // body + + const uint64_t * blocks = (const uint64_t *)(data); + + for(i = 0; i < nblocks; i++) + { + uint64_t k1 = getblock(blocks,i*2+0); + uint64_t k2 = getblock(blocks,i*2+1); + + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + + h1 = ROTL64(h1,27); h1 += h2; h1 = h1*5+0x52dce729; + + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + h2 = ROTL64(h2,31); h2 += h1; h2 = h2*5+0x38495ab5; + } + + //---------- + // tail + + const uint8_t * tail = (const uint8_t*)(data + nblocks*16); + + uint64_t k1 = 0; + uint64_t k2 = 0; + + switch(len & 15) + { + case 15: k2 ^= (uint64_t)(tail[14]) << 48; + case 14: k2 ^= (uint64_t)(tail[13]) << 40; + case 13: k2 ^= (uint64_t)(tail[12]) << 32; + case 12: k2 ^= (uint64_t)(tail[11]) << 24; + case 11: k2 ^= (uint64_t)(tail[10]) << 16; + case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; + case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; + k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; + + case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; + case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; + case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; + case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; + case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; + case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; + case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; + case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; + k1 *= c1; k1 = ROTL64(k1,31); k1 *= c2; h1 ^= k1; + }; + + //---------- + // finalization + + h1 ^= len; h2 ^= len; + + h1 += h2; + h2 += h1; + + h1 = fmix64(h1); + h2 = fmix64(h2); + + h1 += h2; + h2 += h1; + + ((uint64_t*)out)[0] = h1; + ((uint64_t*)out)[1] = h2; +} + +//----------------------------------------------------------------------------- diff --git a/src/lib/ram_hash_murmur.c b/src/lib/ram_hash_murmur.c new file mode 100644 index 0000000..4f6ac9b --- /dev/null +++ b/src/lib/ram_hash_murmur.c @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <stdint.h> +#include <murmur3.h> +#include <ram_hash.h> + +uint32_t generate_hash(const void *buffer, unsigned int size) +{ + uint32_t hash; + MurmurHash3_x86_32(buffer, size, 0xDEADBEEF, &hash); + return hash; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/43301 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9dfd371c67966bf7a342fdb5562445e63afce664 Gerrit-Change-Number: 43301 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

4 6

Change in coreboot[master]: soc/amd/picasso: Add support for RAM hash
by Raul Rangel (Code Review) 07 Aug '23

07 Aug '23

Raul Rangel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43302 ) Change subject: soc/amd/picasso: Add support for RAM hash ...................................................................... soc/amd/picasso: Add support for RAM hash This CL allocates a region in EARLY_DRAM to store the RAM hashes. It also introduces a hard coded memory map based on the current e820 map. In the future we could maybe automate the generate of the hash_ranges. Until now we will need to keep it updated. To enable, add the following to your .config: CONFIG_ENABLE_RAM_HASH=y Hashing RAM from the SMM handler is pretty slow compared to trying it in bootblock. Not sure if the OS has reset the MTRRs. Example of entering S3: coreboot-4.12-1163-gd9cc83a4ce58-dirty Tue Jul 7 21:34:13 UTC 2020 smm starting (log level: 8)... SMI# #0 SMI#: SLP = 0x0c01 hash_ram: Start for_each_range: Processing range 0x1000 -> 0xa0000 Processed block 128: crc: 0x7f00c996. Remaining: 0 MiB Processed block 256: crc: 0x7f00c996. Remaining: 0 MiB Processed block 384: crc: 0x7f00c996. Remaining: 0 MiB Processed block 512: crc: 0x7f00c996. Remaining: 0 MiB for_each_range: Processing range 0x100000 -> 0x2000000 for_each_range: Processing range 0x22cd000 -> 0xcc50c000 Processed block 128: crc: 0x9a22c19c. Remaining: 3107 MiB Processed block 256: crc: 0x9a22c19c. Remaining: 2979 MiB Processed block 384: crc: 0x9a22c19c. Remaining: 2851 MiB ... Example of exiting S3: Timestamp - ACPI wake jump: 36887335255 verify_ram: Start for_each_range: Processing range 0x1000 -> 0xa0000 Processed block 128: crc: 0x7f00c996. Remaining: 0 MiB Processed block 256: crc: 0x7f00c996. Remaining: 0 MiB Processed block 384: crc: 0x7f00c996. Remaining: 0 MiB Processed block 512: crc: 0x7f00c996. Remaining: 0 MiB for_each_range: Processing range 0x100000 -> 0x2000000 for_each_range: Processing range 0x22cd000 -> 0xcc50c000 Processed block 128: crc: 0x9a22c19c. Remaining: 3107 MiB Processed block 256: crc: 0x9a22c19c. Remaining: 2979 MiB Processed block 384: crc: 0x9a22c19c. Remaining: 2851 MiB Processed block 512: crc: 0x9a22c19c. Remaining: 2723 MiB Processed block 640: crc: 0x9a22c19c. Remaining: 2595 MiB Processed block 768: crc: 0x9a22c19c. Remaining: 2467 MiB Processed block 896: crc: 0x9a22c19c. Remaining: 2339 MiB Processed block 1024: crc: 0x9a22c19c. Remaining: 2211 MiB Processed block 1152: crc: 0x9a22c19c. Remaining: 2083 MiB Processed block 1280: crc: 0x9a22c19c. Remaining: 1955 MiB Processed block 1408: crc: 0x9a22c19c. Remaining: 1827 MiB Processed block 1536: crc: 0x9a22c19c. Remaining: 1699 MiB Processed block 1664: crc: 0x9a22c19c. Remaining: 1571 MiB Processed block 1792: crc: 0x9a22c19c. Remaining: 1443 MiB Processed block 1920: crc: 0x9a22c19c. Remaining: 1315 MiB Processed block 2048: crc: 0x9a22c19c. Remaining: 1187 MiB Processed block 2176: crc: 0x9a22c19c. Remaining: 1059 MiB Processed block 2304: crc: 0x9a22c19c. Remaining: 931 MiB Processed block 2432: crc: 0x9a22c19c. Remaining: 803 MiB Processed block 2560: crc: 0x9a22c19c. Remaining: 675 MiB Processed block 2688: crc: 0x9a22c19c. Remaining: 547 MiB Processed block 2816: crc: 0x9a22c19c. Remaining: 419 MiB Processed block 2944: crc: 0x9a22c19c. Remaining: 291 MiB Processed block 3072: crc: 0x9a22c19c. Remaining: 163 MiB Processed block 3200: crc: 0x9a22c19c. Remaining: 35 MiB verify_ram: Done BUG=b:159081993 TEST=S3 suspend and resume on trembyle Signed-off-by: Raul E Rangel <rrangel(a)chromium.org> Change-Id: Ia9b80044dd794ddfb0b661d517367259917cd944 --- M src/soc/amd/picasso/Kconfig M src/soc/amd/picasso/Makefile.inc M src/soc/amd/picasso/memlayout.ld A src/soc/amd/picasso/ram_hash.c M src/soc/amd/picasso/smihandler.c 5 files changed, 65 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/43302/1 diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig index fd2a205..2e7ce89 100644 --- a/src/soc/amd/picasso/Kconfig +++ b/src/soc/amd/picasso/Kconfig @@ -57,6 +57,7 @@ select HAVE_CF9_RESET select SUPPORT_CPU_UCODE_IN_CBFS select ACPI_NO_SMI_GNVS + select HAS_RAM_HASH config MEMLAYOUT_LD_FILE string @@ -174,6 +175,20 @@ Sets the size of DRAM allocation for verstage in linker script if running as a separate stage on x86. +config RAM_HASH_ADDR + hex + depends on ENABLE_RAM_HASH + default 0x21CD000 + help + Where in memory to store the hashes. + +config RAM_HASH_SIZE + hex + depends on ENABLE_RAM_HASH + default 0x100000 + help + Size of the RAM_HASH buffer. + config RAMBASE hex default 0x10000000 diff --git a/src/soc/amd/picasso/Makefile.inc b/src/soc/amd/picasso/Makefile.inc index 39269e9..679ee98 100644 --- a/src/soc/amd/picasso/Makefile.inc +++ b/src/soc/amd/picasso/Makefile.inc @@ -89,6 +89,9 @@ smm-y += smu.c smm-y += config.c +ramstage-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c +smm-$(CONFIG_ENABLE_RAM_HASH) += ram_hash.c + CPPFLAGS_common += -I$(src)/soc/amd/picasso CPPFLAGS_common += -I$(src)/soc/amd/picasso/include CPPFLAGS_common += -I$(src)/soc/amd/picasso/acpi diff --git a/src/soc/amd/picasso/memlayout.ld b/src/soc/amd/picasso/memlayout.ld index 6f43ba1..bb15263 100644 --- a/src/soc/amd/picasso/memlayout.ld +++ b/src/soc/amd/picasso/memlayout.ld @@ -89,6 +89,10 @@ VERSTAGE(CONFIG_VERSTAGE_ADDR, CONFIG_VERSTAGE_SIZE) #endif +#if CONFIG(ENABLE_RAM_HASH) + REGION(hash_buffer, 0x21CD000, 1M, 4) +#endif + EARLY_RESERVED_DRAM_END(.) RAMSTAGE(CONFIG_RAMBASE, 8M) diff --git a/src/soc/amd/picasso/ram_hash.c b/src/soc/amd/picasso/ram_hash.c new file mode 100644 index 0000000..c7f0be4 --- /dev/null +++ b/src/soc/amd/picasso/ram_hash.c @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <stdint.h> +#include <ram_hash.h> +#include <commonlib/bsd/helpers.h> + +struct hash_range mem_layout[] = { + { + .start = 0x1000, + .end = 0xa0000, + .block_size = 1 * KiB, + .diff = 1 + }, + { + .start = 0x100000, + .end = 0x2000000, + .block_size = 1 * MiB, + .diff = 0 + }, + { + .start = 0x22cd000, + .end = 0xcc50c000, + .block_size = 1 * MiB, + .diff = 0 + }, +}; + +void soc_hash_ram(void) +{ + hash_ram(mem_layout, ARRAY_SIZE(mem_layout)); +} +void soc_verify_ram(void) +{ + verify_ram(mem_layout, ARRAY_SIZE(mem_layout)); +} diff --git a/src/soc/amd/picasso/smihandler.c b/src/soc/amd/picasso/smihandler.c index 7e762a9..6832526 100644 --- a/src/soc/amd/picasso/smihandler.c +++ b/src/soc/amd/picasso/smihandler.c @@ -3,6 +3,7 @@ #include <arch/io.h> #include <console/console.h> #include <cpu/x86/smm.h> +#include <ram_hash.h> #include <cpu/x86/cache.h> #include <cpu/amd/amd64_save_state.h> #include <acpi/acpi.h> @@ -144,6 +145,13 @@ printk(BIOS_SPEW, "SMI#: SLP = 0x%04x\n", pm1cnt); slp_typ = acpi_sleep_from_pm1(pm1cnt); + /* + * Hash RAM as soon as we know we are entering S3 to catch any problems + * caused by the SMM handler, PSP, or SMU. + */ + if (slp_typ == ACPI_S3) + soc_hash_ram(); + /* Do any mainboard sleep handling */ mainboard_smi_sleep(slp_typ); -- To view, visit https://review.coreboot.org/c/coreboot/+/43302 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia9b80044dd794ddfb0b661d517367259917cd944 Gerrit-Change-Number: 43302 Gerrit-PatchSet: 1 Gerrit-Owner: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

2 3

Change in ...coreboot[master]: mb/gigabyte: add GA-P67A-UD3R
by James (Code Review) 07 Aug '23

07 Aug '23

James has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31363 Change subject: mb/gigabyte: add GA-P67A-UD3R ...................................................................... mb/gigabyte: add GA-P67A-UD3R This is a Intel P67 chipset motherboard for Sandy Bridge processors. The P67 chipset has no graphics support. This board has redundant 4MB SOIC-8 flash chips, and flashrom is usable with the vendor BIOS. This is an original P67 chipset, and is affected by a SATA 2 hardware bug. There is a variant P67A-UD3R-B3 that is unaffected. The function of PCIe ports PCIEX4 and PCIEX1_* are configured in PCHSTRP9. By default, PCIEX4 is configured for 4 lanes and PCIEX1_* are disabled. This can be switched to 1 lane for all ports. Tested and working: - Intel Core i7 2600 - 4 DIMMs (4x4GB DDR3) - Booting Linux (SeaBIOS) - Native RAM init - PCIe graphics - Onboard Ethernet - Sensors (SuperIO) - S3 sleep - S4 hibernate - SATA 3 - USB 2.0 - USB 3.0 - Onboard audio (speakers, headphones) - CMOS - EHCI debug port - Serial port Not tested: - SATA 2 - PS/2 keyboard/mouse - Digital audio Change-Id: I4fbf50376be3184bf01a3bc8aae09bce54676707 Signed-off-by: James Ye <jye836(a)gmail.com> --- A src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig A src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name A src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl A src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c A src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt A src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default A src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout A src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb A src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl A src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c A src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c A src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c 16 files changed, 781 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/31363/1 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig new file mode 100644 index 0000000..c1efe12 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig @@ -0,0 +1,40 @@ +if BOARD_GIGABYTE_GA_P67A_UD3R + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_4096 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_BD82X6X + select USE_NATIVE_RAMINIT + select SUPERIO_ITE_IT8728F + +config MAINBOARD_DIR + string + default "gigabyte/ga-p67a-ud3r" + +config MAINBOARD_PART_NUMBER + string + default "GA-P67A-UD3R" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x5001 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1458 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX + int + default 2 + +endif # BOARD_GIGABYTE_GA_P67A_UD3R diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name new file mode 100644 index 0000000..15f0655 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_GIGABYTE_GA_P67A_UD3R + bool "GA-P67A-UD3R" diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc b/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc new file mode 100644 index 0000000..3dae61e --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/Makefile.inc @@ -0,0 +1 @@ +romstage-y += gpio.c diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/ec.asl diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl new file mode 100644 index 0000000..34de86f --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/mainboard.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope (\_SB) +{ + Device (PWRB) + { + Name (_HID, EisaId("PNP0C0C")) + } +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl new file mode 100644 index 0000000..d8d3320 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/platform.asl @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl new file mode 100644 index 0000000..2b20c77 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi/superio.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c new file mode 100644 index 0000000..a2f383b --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/acpi_tables.c @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt b/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt new file mode 100644 index 0000000..c6f16ae --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.gigabyte.com/Motherboard/GA-P67A-UD3R-rev-10 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2011 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default new file mode 100644 index 0000000..60de212 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.default @@ -0,0 +1,5 @@ +boot_option=Fallback +debug_level=Debug +nmi=Enable +power_on_after_fail=Disable +sata_mode=AHCI diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout new file mode 100644 index 0000000..4e5c0a8 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/cmos.layout @@ -0,0 +1,107 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 3 boot_option +388 4 h 0 reboot_counter + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 4 debug_level +#399 1 r 0 unused + +#400 8 r 0 reserved for century byte + +# coreboot config options: southbridge +#400 1 e 0 unused +408 1 e 1 nmi +409 2 e 5 power_on_after_fail +411 1 e 6 sata_mode + +# coreboot config options: northbridge +#432 3 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable + +2 0 Enable +2 1 Disable + +3 0 Fallback +3 1 Normal + +4 0 Emergency +4 1 Alert +4 2 Critical +4 3 Error +4 4 Warning +4 5 Notice +4 6 Info +4 7 Debug +4 8 Spew + +5 0 Disable +5 1 Enable +5 2 Keep + +6 0 AHCI +6 1 Compatible + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb b/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb new file mode 100644 index 0000000..4ed458d --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/devicetree.cb @@ -0,0 +1,124 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2019 James Ye <jye836(a)gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +# +chip northbridge/intel/sandybridge + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + device lapic 0x0 on end + + # Magic APIC ID to locate this chip + device lapic 0xacac off end + + register "c1_acpower" = "1" + register "c2_acpower" = "3" + register "c3_acpower" = "5" + + register "c1_battery" = "1" + register "c2_battery" = "3" + register "c3_battery" = "5" + end + end + + device domain 0x0 on + subsystemid 0x1458 0x5001 inherit + + device pci 00.0 on end # Host bridge + device pci 01.0 on # PCIe bridge (PCIEX16) + subsystemid 0x1458 0x5000 + end + device pci 02.0 off end # Internal graphics + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "sata_port_map" = "0x3f" + register "sata_interface_speed_support" = "0x3" + + register "gen1_dec" = "0x000c0801" + register "gen2_dec" = "0x000c0291" + + register "pcie_port_coalesce" = "0" + register "c2_latency" = "0x0065" + register "p_cnt_throttling_supported" = "1" + + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + + device pci 16.0 off end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1458 0x5006 + end + device pci 1b.0 on # High Definition Audio controller + subsystemid 0x1458 0xa102 + end + device pci 1c.0 on end # Unrouted, to disable coalescing + device pci 1c.1 on # PCIe Port #2 + device pci 00.0 on # USB 3.0 controller + subsystemid 0x1458 0x5007 + end + end + device pci 1c.2 on # PCIe Port #3 + device pci 00.0 on # Ethernet controller + subsystemid 0x1458 0xe000 + end + end + device pci 1c.3 on # PCIe Port #4 + device pci 00.0 on # PCI bridge + subsystemid 0x1458 0x5000 + end + end + device pci 1c.4 on end # PCIe Port #5 (PCIEX4) + device pci 1c.5 off end # PCIe Port #6 (PCIEX1_1) + device pci 1c.6 off end # PCIe Port #7 (PCIEX1_2) + device pci 1c.7 off end # PCIe Port #8 (PCIEX1_3) + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1458 0x5006 + end + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + chip superio/ite/it8728f + device pnp 2e.0 off end # Floppy, not routed + device pnp 2e.1 on # COM1 + io 0x60 = 0x03f8 + irq 0x70 = 4 + end + device pnp 2e.2 off end # COM2, not routed + device pnp 2e.3 off end # Parallel port, not rounted + device pnp 2e.4 on # Environment Controller + io 0x60 = 0x0290 + io 0x62 = 0x0 + irq 0x70 = 0 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off end # Mouse + device pnp 2e.7 off end # GPIO + device pnp 2e.a off end # CIR, not routed + end + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x1458 0xb005 + end + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl b/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl new file mode 100644 index 0000000..365a0fa --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/dsdt.asl @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock ( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include "acpi/mainboard.asl" + #include "acpi/platform.asl" + #include "acpi/superio.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + + // Global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // Chipset specific sleep states + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c b/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c new file mode 100644 index 0000000..c65f432 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/gpio.c @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio11 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c b/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c new file mode 100644 index 0000000..a843a2b --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/hda_verb.c @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0892, /* Codec Vendor / Device ID: Realtek */ + 0x1458a022, /* Subsystem ID */ + + 15, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x2, 0x1458a022), + + /* NID 0x11. */ + AZALIA_PIN_CFG(0x2, 0x11, 0x99430140), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x2, 0x12, 0x411111f0), + + /* NID 0x14. */ + AZALIA_PIN_CFG(0x2, 0x14, 0x01014410), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x2, 0x15, 0x01011412), + + /* NID 0x16. */ + AZALIA_PIN_CFG(0x2, 0x16, 0x01016411), + + /* NID 0x17. */ + AZALIA_PIN_CFG(0x2, 0x17, 0x01012414), + + /* NID 0x18. */ + AZALIA_PIN_CFG(0x2, 0x18, 0x01a19c50), + + /* NID 0x19. */ + AZALIA_PIN_CFG(0x2, 0x19, 0x02a19c60), + + /* NID 0x1a. */ + AZALIA_PIN_CFG(0x2, 0x1a, 0x0181345f), + + /* NID 0x1b. */ + AZALIA_PIN_CFG(0x2, 0x1b, 0x02214c20), + + /* NID 0x1c. */ + AZALIA_PIN_CFG(0x2, 0x1c, 0x593301f0), + + /* NID 0x1d. */ + AZALIA_PIN_CFG(0x2, 0x1d, 0x4005e601), + + /* NID 0x1e. */ + AZALIA_PIN_CFG(0x2, 0x1e, 0x014b6130), + + /* NID 0x1f. */ + AZALIA_PIN_CFG(0x2, 0x1f, 0x411111f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c b/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c new file mode 100644 index 0000000..3037b73 --- /dev/null +++ b/src/mainboard/gigabyte/ga-p67a-ud3r/romstage.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 James Ye <jye836(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <superio/ite/common/ite.h> +#include <superio/ite/it8728f/it8728f.h> + +#define SUPERIO_BASE 0x2e +#define SUPERIO_GPIO PNP_DEV(SUPERIO_BASE, IT8728F_GPIO) +#define SERIAL_DEV PNP_DEV(SUPERIO_BASE, 0x01) + +void pch_enable_lpc(void) +{ + pci_write_config16(PCH_LPC_DEV, LPC_EN, KBC_LPC_EN | CNF1_LPC_EN | + CNF2_LPC_EN | COMA_LPC_EN); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 1, 6, 2 }, + { 1, 6, 2 }, + { 1, 6, 3 }, + { 1, 5, 3 }, + { 1, 5, 4 }, + { 1, 5, 4 }, + { 1, 5, 5 }, + { 1, 5, 5 }, + { 1, 5, 6 }, + { 1, 5, 6 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ + /* Enable serial port */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + /* Disable SIO WDT which kicks in DualBIOS */ + ite_reg_write(SUPERIO_GPIO, 0xEF, 0x7E); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/31363 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4fbf50376be3184bf01a3bc8aae09bce54676707 Gerrit-Change-Number: 31363 Gerrit-PatchSet: 1 Gerrit-Owner: James <jye836(a)gmail.com> Gerrit-MessageType: newchange

5 22

← Newer
1
...
6
7
8
9
10
11
12
...
325
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit November 2020