coreboot-gerrit November 2020

coreboot-gerrit@coreboot.org

1 participants
3243 discussions

Change in ...coreboot[master]: soc/intel/apl: enable lpc at bootblock
by Thomas Heijligen (Code Review) 01 Feb '22

01 Feb '22

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/31371 to review the following change. Change subject: soc/intel/apl: enable lpc at bootblock ...................................................................... soc/intel/apl: enable lpc at bootblock Serial console can be attached to lpc bus. Enable it for early debug Change-Id: Ib3d09e4eb23655825b7603f49f0bad31116ac6e1 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> Signed-off-by: Thomas Heijligen <thomas.heijligen(a)secunet.com> --- M src/soc/intel/apollolake/bootblock/bootblock.c M src/soc/intel/apollolake/chip.h M src/soc/intel/apollolake/lpc.c M src/soc/intel/common/block/lpc/lpc_lib.c 4 files changed, 21 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/71/31371/1 diff --git a/src/soc/intel/apollolake/bootblock/bootblock.c b/src/soc/intel/apollolake/bootblock/bootblock.c index cf3e839..e0217ef 100644 --- a/src/soc/intel/apollolake/bootblock/bootblock.c +++ b/src/soc/intel/apollolake/bootblock/bootblock.c @@ -20,6 +20,7 @@ #include <device/pci.h> #include <intelblocks/cpulib.h> #include <intelblocks/fast_spi.h> +#include <intelblocks/lpc_lib.h> #include <intelblocks/p2sb.h> #include <intelblocks/pcr.h> #include <intelblocks/rtc.h> @@ -120,4 +121,6 @@ paging_set_default_pat(); paging_enable_for_car("pdpt", "pt"); } + + pch_enable_lpc(); } diff --git a/src/soc/intel/apollolake/chip.h b/src/soc/intel/apollolake/chip.h index b8f9f8c..2f25a3b 100644 --- a/src/soc/intel/apollolake/chip.h +++ b/src/soc/intel/apollolake/chip.h @@ -44,6 +44,9 @@ /* Common structure containing soc config data required by common code*/ struct soc_intel_common_config common_soc_config; + /* Generic i/o decode ranges routed to LPC */ + uint32_t lpc_gen_dec[4]; + /* * Mapping from PCIe root port to CLKREQ input on the SOC. The SOC has * four CLKREQ inputs, but six root ports. Root ports without an diff --git a/src/soc/intel/apollolake/lpc.c b/src/soc/intel/apollolake/lpc.c index a20b82a..ffa4cf5 100644 --- a/src/soc/intel/apollolake/lpc.c +++ b/src/soc/intel/apollolake/lpc.c @@ -42,6 +42,18 @@ return apl_lpc_fixed_mmio_ranges; } +void soc_get_gen_io_dec_range(const struct device *dev, uint32_t *gen_io_dec) +{ + const struct soc_intel_apollolake_config *const config = dev->chip_info; + + if (!config) { + memset(gen_io_dec, 0x00, sizeof(config->lpc_gen_dec)); + return; + } + + memcpy(gen_io_dec, config->lpc_gen_dec, sizeof(config->lpc_gen_dec)); +} + static const struct pad_config lpc_gpios[] = { #if IS_ENABLED(CONFIG_SOC_INTEL_GLK) #if !IS_ENABLED(CONFIG_SOC_ESPI) diff --git a/src/soc/intel/common/block/lpc/lpc_lib.c b/src/soc/intel/common/block/lpc/lpc_lib.c index fb50b74..d584d2c 100644 --- a/src/soc/intel/common/block/lpc/lpc_lib.c +++ b/src/soc/intel/common/block/lpc/lpc_lib.c @@ -24,6 +24,9 @@ #include <lib.h> #include "lpc_def.h" #include <soc/pci_devs.h> +#include <stdint.h> + +__weak void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec) {} uint16_t lpc_enable_fixed_io_ranges(uint16_t io_enables) { -- To view, visit https://review.coreboot.org/c/coreboot/+/31371 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib3d09e4eb23655825b7603f49f0bad31116ac6e1 Gerrit-Change-Number: 31371 Gerrit-PatchSet: 1 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

7 16

Change in coreboot[master]: sc7280: enable bl31
by Ravi kumar (Code Review) 28 Jan '22

28 Jan '22

Ravi kumar has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/47904 ) Change subject: sc7280: enable bl31 ...................................................................... sc7280: enable bl31 Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/28014/44 Signed-off-by: Ravi Kumar Bokka <rbokka(a)codeaurora.org> Change-Id: I61c695fb4fef3ae36ffc5a263236b9d40c299dc4 --- M src/soc/qualcomm/sc7280/Kconfig M src/soc/qualcomm/sc7280/memlayout.ld 2 files changed, 2 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/47904/1 diff --git a/src/soc/qualcomm/sc7280/Kconfig b/src/soc/qualcomm/sc7280/Kconfig index d6f56ba..6882457 100644 --- a/src/soc/qualcomm/sc7280/Kconfig +++ b/src/soc/qualcomm/sc7280/Kconfig @@ -6,6 +6,7 @@ select ARCH_RAMSTAGE_ARMV8_64 select ARCH_ROMSTAGE_ARMV8_64 select ARCH_VERSTAGE_ARMV8_64 + select ARM64_USE_ARM_TRUSTED_FIRMWARE select GENERIC_GPIO_LIB select GENERIC_UDELAY select HAVE_MONOTONIC_TIMER diff --git a/src/soc/qualcomm/sc7280/memlayout.ld b/src/soc/qualcomm/sc7280/memlayout.ld index a3a785e..fed3a72 100644 --- a/src/soc/qualcomm/sc7280/memlayout.ld +++ b/src/soc/qualcomm/sc7280/memlayout.ld @@ -50,7 +50,7 @@ /* Various hardware/software subsystems make use of this area */ REGION(dram_aop, 0x80800000, 0x040000, 0x1000) REGION(dram_soc, 0x80900000, 0x200000, 0x1000) - BL31(0x80B00000, 1M) POSTRAM_CBFS_CACHE(0x9F800000, 16M) RAMSTAGE(0xA0800000, 16M) + BL31(0xC0000000, 1M) } -- To view, visit https://review.coreboot.org/c/coreboot/+/47904 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I61c695fb4fef3ae36ffc5a263236b9d40c299dc4 Gerrit-Change-Number: 47904 Gerrit-PatchSet: 1 Gerrit-Owner: Ravi kumar <rbokka(a)codeaurora.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-MessageType: newchange

5 22

Change in coreboot[master]: mb/acer/aspire_vn7_572g: Adds support for an Acer laptop Adds initial...
by Benjamin Doron (Code Review) 28 Jan '22

28 Jan '22

Benjamin Doron has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35523 ) Change subject: mb/acer/aspire_vn7_572g: Adds support for an Acer laptop Adds initial, rudimentary support for Acer Aspire VN7-572G. May not boot correctly or at all. For testing purposes only. ...................................................................... mb/acer/aspire_vn7_572g: Adds support for an Acer laptop Adds initial, rudimentary support for Acer Aspire VN7-572G. May not boot correctly or at all. For testing purposes only. Change-Id: I6340116abfeb2fbd280d143b74d323e4da3566f6 Signed-off-by: Benjamin Doron <benjamin.doron00(a)gmail.com> --- A src/mainboard/acer/Kconfig A src/mainboard/acer/Kconfig.name A src/mainboard/acer/aspire_vn7_572g/Kconfig A src/mainboard/acer/aspire_vn7_572g/Kconfig.name A src/mainboard/acer/aspire_vn7_572g/Makefile.inc A src/mainboard/acer/aspire_vn7_572g/acpi/ec.asl A src/mainboard/acer/aspire_vn7_572g/acpi/graphics.asl A src/mainboard/acer/aspire_vn7_572g/acpi/mainboard.asl A src/mainboard/acer/aspire_vn7_572g/acpi/superio.asl A src/mainboard/acer/aspire_vn7_572g/acpi_tables.c A src/mainboard/acer/aspire_vn7_572g/board_info.txt A src/mainboard/acer/aspire_vn7_572g/devicetree.cb A src/mainboard/acer/aspire_vn7_572g/dsdt.asl A src/mainboard/acer/aspire_vn7_572g/gpio.h A src/mainboard/acer/aspire_vn7_572g/hda_verb.c A src/mainboard/acer/aspire_vn7_572g/mainboard.c A src/mainboard/acer/aspire_vn7_572g/ramstage.c A src/mainboard/acer/aspire_vn7_572g/romstage.c 18 files changed, 1,282 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/35523/1 diff --git a/src/mainboard/acer/Kconfig b/src/mainboard/acer/Kconfig new file mode 100644 index 0000000..f56a2a2 --- /dev/null +++ b/src/mainboard/acer/Kconfig @@ -0,0 +1,16 @@ +if VENDOR_ACER + +choice + prompt "Mainboard model" + +source "src/mainboard/acer/*/Kconfig.name" + +endchoice + +source "src/mainboard/acer/*/Kconfig" + +config MAINBOARD_VENDOR + string "Mainboard Vendor" + default "Acer" + +endif # VENDOR_ACER diff --git a/src/mainboard/acer/Kconfig.name b/src/mainboard/acer/Kconfig.name new file mode 100644 index 0000000..bb177f9 --- /dev/null +++ b/src/mainboard/acer/Kconfig.name @@ -0,0 +1,2 @@ +config VENDOR_ACER + bool "Acer" diff --git a/src/mainboard/acer/aspire_vn7_572g/Kconfig b/src/mainboard/acer/aspire_vn7_572g/Kconfig new file mode 100644 index 0000000..4b3c127 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/Kconfig @@ -0,0 +1,68 @@ +if BOARD_ACER_VN7_572G + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select SYSTEM_TYPE_LAPTOP + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select SOC_INTEL_SKYLAKE + select MAINBOARD_USES_FSP2_0 + select SPD_READ_BY_WORD + select MAINBOARD_HAS_LPC_TPM + select NO_POST # This platform has no way to see POST codes so disable them by default. + +config IRQ_SLOT_COUNT + int + default 18 + +config MAINBOARD_VENDOR + string + default "Acer" + +config MAINBOARD_FAMILY + string + default "Aspire V Nitro" + +config MAINBOARD_PART_NUMBER + string + default "Aspire VN7-572G" + +config MAINBOARD_DIR + string + default "acer/aspire_vn7_572g" + +config DEVICETREE + string + default "devicetree.cb" + +config MAX_CPUS + int + default 4 + +config VGA_BIOS_ID + string + default "8086,1916" + +config DIMM_MAX + int + default 2 + +config DIMM_SPD_SIZE + int + default 512 + +config CPU_MICROCODE_CBFS_LEN + hex + default 0x18000 + +config CPU_MICROCODE_CBFS_LOC + hex + default 0xFFE115A0 + +config CBFS_SIZE + hex + default 0x5c0000 + +endif diff --git a/src/mainboard/acer/aspire_vn7_572g/Kconfig.name b/src/mainboard/acer/aspire_vn7_572g/Kconfig.name new file mode 100644 index 0000000..b881680 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ACER_VN7_572G + bool "Aspire VN7-572G" diff --git a/src/mainboard/acer/aspire_vn7_572g/Makefile.inc b/src/mainboard/acer/aspire_vn7_572g/Makefile.inc new file mode 100644 index 0000000..35f0f6c --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/Makefile.inc @@ -0,0 +1,17 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2015 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-y += ramstage.c +ramstage-y += hda_verb.c diff --git a/src/mainboard/acer/aspire_vn7_572g/acpi/ec.asl b/src/mainboard/acer/aspire_vn7_572g/acpi/ec.asl new file mode 100644 index 0000000..2eed489 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/acpi/ec.asl @@ -0,0 +1,328 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Name (EMBA, 0xFE800000) + +Device (EC0) +{ + Name (_HID, EisaId ("PNP0C09")) /* Embedded Controller Device */ // _HID: Hardware ID + + Name (_GPE, 0x50) // _GPE: General Purpose Events + Method (_STA, 0, NotSerialized) // _STA: Status + { + Return (0x0F) + } + + Name (_CRS, ResourceTemplate () { // _CRS: Current Resource Settings + IO (Decode16, 0x62, 0x62, 0, 1) // Range Minimum, Range Maximum, Alignment, Length + IO (Decode16, 0x66, 0x66, 0, 1) // Range Minimum, Range Maximum, Alignment, Length + }) + OperationRegion (ECO1, SystemIO, 0x62, One) + Field (ECO1, ByteAcc, Lock, Preserve) + { + PX62, 8 + } + + OperationRegion (ECO2, SystemIO, 0x66, One) + Field (ECO2, ByteAcc, Lock, Preserve) + { + PX66, 8 + } + + OperationRegion (ECMB, SystemMemory, EMBA, 0x0200) + OperationRegion (RAM, EmbeddedControl, Zero, 0xFF) + Field (RAM, ByteAcc, Lock, Preserve) + { + CMDB, 8, + Offset (0x06), + CMD2, 8, + CMD1, 8, + CMD0, 8, + Offset (0x0A), + , 1, /* Reserved */ + , 1, /* Reserved */ + Offset (0x10), + EQEN, 1, + , 1, /* Reserved */ + Offset (0x4E), + ISEN, 1, /* Sense? (0=Not Exist, 1=Exist) */ + Offset (0x51), + , 3, /* Reserved */ + TPEN, 1, + Offset (0x52), + WLEX, 1, /* Wireless LAN (0=Not Exist, 1=Exist) */ + BTEX, 1, /* Bluetooth? (0=Not Exist, 1=Exist) */ + EX3G, 1, /* 3G (0=Not Exist, 1=Exist) */ + , 3, /* Reserved */ + RFEX, 1, + Offset (0x57), + , 7, /* Reserved */ + AHKB, 1, + AHKE, 8, + Offset (0x5C), + Offset (0x5D), + Offset (0x70), + , 1, /* Reserved */ + KLID, 1, /* LID? */ + , 3, /* Reserved */ + KACS, 1, /* AC power? */ + Offset (0x71), + WLEN, 1, /* Wireless LAN (0=Not Enabled, 1=Enabled) */ + BTEN, 1, /* Bluetooth (0=Not Enabled, 1=Enabled) */ + , 3, /* Reserved */ + ISS3, 1, + ISS4, 1, + ISS5, 1, + Offset (0x74), + , 2, /* Reserved */ + , 1, /* Reserved */ + TPEX, 1, + Offset (0x75), + BLST, 1, + LMIB, 1, + Offset (0x76), + ECSS, 4, + EOSS, 4 + } + + Method (_REG, 2, NotSerialized) // _REG: Region Availability + { + /* Initialize AC power state */ + Store (KACS, \PWRS) + + /* Initialize LID switch state */ + Store (KLID, \LIDS) + } + + /* KEY_BRIGHTNESSUP */ + Method (_Q1C, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF + { + Notify (^^^GFX0.DD1F, 0x86) // Device-Specific + } + + /* KEY_BRIGHTNESSDOWN */ + Method (_Q1D, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF + { + Notify (^^^GFX0.DD1F, 0x87) // Device-Specific + } + + /* Battery Information Event */ + Method (_Q40, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF + { + Notify (BAT0, 0x81) // Information Change + } + + /* AC event */ + Method (_Q50, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF + { + Notify (ADP1, 0x80) // Status Change + } + + /* Lid event */ + Method (_Q52, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF + { + Notify (LID0, 0x80) // Status Change + } + + /* Battery Information Event */ + Method (_Q41, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF + { + Notify (BAT0, 0x81) // Information Change + } + + /* Battery Status Event */ + Method (_Q48, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF + { + Notify (BAT0, 0x80) // Status Change + } + + Method (ECWK, 1, NotSerialized) + { + EQEN = One + Notify (BAT0, 0x81) // Information Change + If (((Arg0 == 0x03) || (Arg0 == 0x04))) + { + Notify (SLPB, 0x02) // Device Wake + } + } + + Name (B0ST, Zero) + Field (ECMB, ByteAcc, Lock, Preserve) + { + Offset (0x08), + MB0S, 8 + } + + OperationRegion (MBB0, SystemMemory, (EMBA + 0x80), 0xFF) + Field (MBB0, ByteAcc, Lock, Preserve) + { + MBRC, 16, + MBFC, 16, + MBPE, 16, + MBAC, 16, + MBVO, 16, + , 15, + MBCM, 1, + MBCU, 16, + MBTV, 16 + } + + Method (GBIF, 3, NotSerialized) + { + If (Arg2) + { + Arg1 [One] = 0xFFFFFFFF + Arg1 [0x02] = 0xFFFFFFFF + Arg1 [0x04] = 0xFFFFFFFF + Arg1 [0x05] = Zero + Arg1 [0x06] = Zero + } + + Return (Arg1) + } + + Method (GBST, 4, NotSerialized) + { + Local0 = Zero + + If ((Arg1 & One)) + { + Local1 = MBAC /* \_SB_.PCI0.LPCB.EC0_.MBAC */ + Local2 = MBRC /* \_SB_.PCI0.LPCB.EC0_.MBRC */ + If (ACST) + { + If ((Arg1 & 0x20)) + { + Local2 = MBFC /* \_SB_.PCI0.LPCB.EC0_.MBFC */ + } + } + + Local3 = MBVO /* \_SB_.PCI0.LPCB.EC0_.MBVO */ + If ((Local1 >= 0x8000)) + { + If ((Local0 & One)) + { + Local1 = (0x00010000 - Local1) + } + Else + { + Local1 = Zero + } + } + + If (Arg2) + { + Local1 *= Local3 + Divide (Local1, 0x03E8, Local1) + } + } + Else + { + Local0 = Zero + Local1 = 0xFFFFFFFF + Local2 = 0xFFFFFFFF + Local3 = 0xFFFFFFFF + } + + Arg3 [Zero] = Local0 + Arg3 [One] = Local1 + Arg3 [0x02] = Local2 + Arg3 [0x03] = Local3 + Return (Arg3) + } + + Name (ACST, One) + Device (ADP1) + { + Name (_HID, "ACPI0003") /* Power Source Device */ // _HID: Hardware ID + Name (_PCL, Package () { \_SB }) // _PCL: Power Consumer List + Method (_PSR) // _PSR: Power Source + { + Return (\PWRS) + } + Method (_STA) // _STA: Status + { + Return (0x0F) + } + } + + Device (BAT0) + { + Name (_HID, EisaId ("PNP0C0A")) /* Control Method Battery */ // _HID: Hardware ID + Name (_UID, Zero) // _UID: Unique ID + Method (_PCL, 0, NotSerialized) // _PCL: Power Consumer List + { + Return (_SB) /* \_SB_ */ + } + + Method (_STA, 0, NotSerialized) // _STA: Status + { + If (B0ST) + { + Return (0x1F) + } + Else + { + Return (0x0F) + } + } + + Name (B0IP, Package (0x0D) + { + 0x00000001, /* 0x00: Power Unit: mAH */ + 0xFFFFFFFF, /* 0x01: Design Capacity */ + 0xFFFFFFFF, /* 0x02: Last Full Charge Capacity */ + 0x00000001, /* 0x03: Battery Technology: Rechargeable */ + 0xFFFFFFFF, /* 0x04: Design Voltage */ + 0x00000000, /* 0x05: Design Capacity of Warning */ + 0x00000000, /* 0x06: Design Capacity of Low */ + 0x00000001, /* 0x07: Capacity Granularity 1 */ + 0x00000001, /* 0x08: Capacity Granularity 2 */ + "", /* 0x09: Model Number */ + "100", /* 0x0a: Serial Number */ + "Lion", /* 0x0b: Battery Type */ + 0x00000000 /* 0x0c: OEM Information */ + }) + + Method (_BIF, 0, NotSerialized) // _BIF: Battery Information + { + Local6 = B0ST /* \_SB_.PCI0.LPCB.EC0_.B0ST */ + While ((Local6)) + { + Local1 = MB0S /* \_SB_.PCI0.LPCB.EC0_.MB0S */ + If ((Local1 & 0x08)) + { + Local6 = Zero + } + } + + Return (GBIF (Zero, B0IP, Local6)) + } + + Name (B0SP, Package (0x04) + { + 0x00000000, /* 0x00: Battery State */ + 0xFFFFFFFF, /* 0x01: Battery Present Rate */ + 0xFFFFFFFF, /* 0x02: Battery Remaining Capacity */ + 0xFFFFFFFF /* 0x03: Battery Present Voltage */ + }) + + Method (_BST, 0, NotSerialized) // _BST: Battery Status + { + Local0 = (DerefOf (B0IP [Zero]) ^ One) + Return (GBST (Zero, MB0S, Local0, B0SP)) + } + } +} diff --git a/src/mainboard/acer/aspire_vn7_572g/acpi/graphics.asl b/src/mainboard/acer/aspire_vn7_572g/acpi/graphics.asl new file mode 100644 index 0000000..e145a2b --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/acpi/graphics.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +OperationRegion (SANV, SystemMemory, 0x7CE5FD98, Zero) +Field (SANV, AnyAcc, Lock, Preserve) +{ + BRTL, 8 +} + +Scope (\_SB.PCI0) +{ + Device (GFX0) + { + Name (_ADR, 0x00020000) // _ADR: Address + + Device (DD1F) + { + Method (_ADR, 0, Serialized) // _ADR: Address + { + Return (0x1F) + } + + Method (_BCL, 0, NotSerialized) // _BCL: Brightness Control Levels + { + Return (Package (0x0C) + { + 0x50, + 0x32, + 0x0A, + 0x14, + 0x1E, + 0x28, + 0x32, + 0x3C, + 0x46, + 0x50, + 0x5A, + 0x64 + }) + } + + Method (_BCM, 1, NotSerialized) // _BCM: Brightness Control Method + { + If (((Arg0 >= Zero) && (Arg0 <= 0x64))) + { + BRTL = Arg0 + } + } + + Method (_BQC, 0, NotSerialized) // _BQC: Brightness Query Current + { + Return (BRTL) /* \BRTL */ + } + } + } +} diff --git a/src/mainboard/acer/aspire_vn7_572g/acpi/mainboard.asl b/src/mainboard/acer/aspire_vn7_572g/acpi/mainboard.asl new file mode 100644 index 0000000..90e75f2 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/acpi/mainboard.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope (\_SB) +{ + Device (LID0) /* Lid Device */ + { + Name (_HID, EisaId ("PNP0C0D")) + + Method (_STA) // _STA: Status + { + Return (0xF) + } + + Method (_LID) // _LID: Lid Status + { + Return (\LIDS) + } + } + + Device (PWRB) + { + Name (_HID, EisaId ("PNP0C0C")) + + Method (_STA) + { + Return (0xF) + } + + Name (_PRW, Package () { 27, 4 }) + } + + Device (SLPB) /* Sleep Button Device */ // _HID: Hardware ID + { + Name (_HID, EisaId ("PNP0C0E")) + + Method (_STA) // _STA: Status + { + Return (0xF) + } + } +} diff --git a/src/mainboard/acer/aspire_vn7_572g/acpi/superio.asl b/src/mainboard/acer/aspire_vn7_572g/acpi/superio.asl new file mode 100644 index 0000000..92c272e --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/acpi/superio.asl @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/acer/aspire_vn7_572g/acpi_tables.c b/src/mainboard/acer/aspire_vn7_572g/acpi_tables.c new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/acpi_tables.c diff --git a/src/mainboard/acer/aspire_vn7_572g/board_info.txt b/src/mainboard/acer/aspire_vn7_572g/board_info.txt new file mode 100644 index 0000000..f16707e --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/board_info.txt @@ -0,0 +1,8 @@ +Vendor name: Acer +Board name: Aspire VN7-572G +Category: laptop +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2015 diff --git a/src/mainboard/acer/aspire_vn7_572g/devicetree.cb b/src/mainboard/acer/aspire_vn7_572g/devicetree.cb new file mode 100644 index 0000000..f38b0b8 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/devicetree.cb @@ -0,0 +1,218 @@ +chip soc/intel/skylake + + # Disable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + register "eist_enable" = "1" + + # Set the Thermal Control Circuit (TCC) activaction value to 95C + # even though FSP integration guide says to set it to 100C for SKL-U + # (offset at 0), because when the TCC activates at 100C, the CPU + # will have already shut itself down from overheating protection. + register "tcc_offset" = "5" # TCC of 95C + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x60-0x66 + register "gen1_dec" = "0x00000061" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Disable DPTF + register "dptf_enable" = "0" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsEnable[2]" = "1" + register "SataPortsDevSlp[0]" = "0" + register "SataPortsDevSlp[1]" = "0" + register "SataPortsDevSlp[2]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "0" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "PttSwitch" = "0" + register "SkipExtGfxScan" = "0" + register "Device4Enable" = "0" + register "HeciEnabled" = "1" + register "SaGv" = "0" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "3" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "0" + + # EC/KBC requires continuous mode + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-----------+-----------+-------------+----------+ + #| Domain/Setting | SA | IA | GT Unsliced | GT | + #+----------------+-----------+-----------+-------------+----------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-----------+-----------+-------------+----------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(7), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + }" + + # Enable Root Ports 1, 9 and 10 + register "PcieRpEnable[2]" = "1" + register "PcieRpLtrEnable[2]" = "1" + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + register "PcieRpEnable[9]" = "1" + register "PcieRpLtrEnable[9]" = "1" + +# register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[0]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" # Type-A Port (left) + register "usb2_ports[4]" = "USB2_PORT_FLEX(OC2)" # Bluetooth + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC2)" # Webcam + register "usb2_ports[7]" = "USB2_PORT_FLEX(OC2)" # SD + + # OC0 should be for Type-C but it seems to not have been wired, according to + # the available schematics, even though it is labeled as USB_OC_TYPEC. +# register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + + # PL2 override 25W + register "tdp_pl2_override" = "25" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 on end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 on end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1f.0 on + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end # LPC Interface + device pci 1f.1 off end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/acer/aspire_vn7_572g/dsdt.asl b/src/mainboard/acer/aspire_vn7_572g/dsdt.asl new file mode 100644 index 0000000..c9bcb7d --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/dsdt.asl @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/skylake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/skylake/acpi/globalnvs.asl> + + // CPU + #include <cpu/intel/common/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + } + + // Chipset specific sleep states + #include <soc/intel/skylake/acpi/sleepstates.asl> + + // Mainboard specific + #include "acpi/mainboard.asl" + + // Graphics display + #include "acpi/graphics.asl" +} diff --git a/src/mainboard/acer/aspire_vn7_572g/gpio.h b/src/mainboard/acer/aspire_vn7_572g/gpio.h new file mode 100644 index 0000000..4d98da1 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/gpio.h @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { +_PAD_CFG_STRUCT(GPP_A0, 0x44000703, 0x0), /* RCIN# */ +_PAD_CFG_STRUCT(GPP_A1, 0x44000702, 0x3c00), /* LAD0 */ +_PAD_CFG_STRUCT(GPP_A2, 0x44000702, 0x3c00), /* LAD1 */ +_PAD_CFG_STRUCT(GPP_A3, 0x44000702, 0x3c00), /* LAD2 */ +_PAD_CFG_STRUCT(GPP_A4, 0x44000702, 0x3c00), /* LAD3 */ +_PAD_CFG_STRUCT(GPP_A5, 0x44000700, 0x0), /* LFRAME# */ +_PAD_CFG_STRUCT(GPP_A6, 0x44000702, 0x0), /* SERIRQ */ +_PAD_CFG_STRUCT(GPP_A7, 0x44000702, 0x0), /* PIRQA# */ +_PAD_CFG_STRUCT(GPP_A8, 0x44000700, 0x0), /* CLKRUN# */ +_PAD_CFG_STRUCT(GPP_A9, 0x44000700, 0x1000), /* CLKOUT_LPC0 */ +_PAD_CFG_STRUCT(GPP_A10, 0x44000700, 0x1000), /* CLKOUT_LPC1 */ +_PAD_CFG_STRUCT(GPP_A11, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A12, 0x44000100, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A13, 0x44000700, 0x0), /* SUSWARN#/SUSPWRDNACK */ +_PAD_CFG_STRUCT(GPP_A14, 0x44000700, 0x0), /* SUS_STAT# */ +_PAD_CFG_STRUCT(GPP_A15, 0x44000700, 0x1000), /* SUS_ACK# */ +_PAD_CFG_STRUCT(GPP_A16, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A17, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A18, 0x44000102, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A19, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A20, 0x44000100, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A21, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A22, 0x44000201, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_A23, 0x44000201, 0x1000), /* GPIO */ + +_PAD_CFG_STRUCT(GPP_B0, 0x44000700, 0x0), /* CORE_VID0 */ +_PAD_CFG_STRUCT(GPP_B1, 0x44000700, 0x0), /* CORE_VID1 */ +_PAD_CFG_STRUCT(GPP_B2, 0x44000100, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B3, 0x80100102, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B4, 0x44000200, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B5, 0x44000702, 0x0), /* SRCCLKREQ0# */ +_PAD_CFG_STRUCT(GPP_B6, 0x44000702, 0x0), /* SRCCLKREQ1# */ +_PAD_CFG_STRUCT(GPP_B7, 0x44000700, 0x0), /* SRCCLKREQ2# */ +_PAD_CFG_STRUCT(GPP_B8, 0x44000702, 0x0), /* SRCCLKREQ3# */ +_PAD_CFG_STRUCT(GPP_B9, 0x44000702, 0x0), /* SRCCLKREQ4# */ +_PAD_CFG_STRUCT(GPP_B10, 0x44000702, 0x0), /* SRCCLKREQ5# */ +_PAD_CFG_STRUCT(GPP_B11, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B12, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B13, 0x44000700, 0x0), /* PLTRST# */ +_PAD_CFG_STRUCT(GPP_B14, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B15, 0x44000200, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B16, 0x44000200, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B17, 0x42880100, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B18, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B19, 0x44000100, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B20, 0x44000102, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B21, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B22, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_B23, 0x44000201, 0x1000), /* GPIO */ + +_PAD_CFG_STRUCT(GPP_C0, 0x44000702, 0x0), /* SMBCLK */ +_PAD_CFG_STRUCT(GPP_C1, 0x44000702, 0x1000), /* SMBDATA */ +_PAD_CFG_STRUCT(GPP_C2, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C3, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C4, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C5, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C6, 0x44000702, 0x0), /* SML1CLK */ +_PAD_CFG_STRUCT(GPP_C7, 0x44000702, 0x1000), /* SML1DATA */ +_PAD_CFG_STRUCT(GPP_C8, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C9, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C10, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C11, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C12, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C13, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C14, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C15, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_C16, 0x44000702, 0x0), /* I2C0_SDA */ +_PAD_CFG_STRUCT(GPP_C17, 0x44000702, 0x0), /* I2C0_SCL */ +_PAD_CFG_STRUCT(GPP_C18, 0x44000702, 0x0), /* I2C1_SDA */ +_PAD_CFG_STRUCT(GPP_C19, 0x44000702, 0x0), /* I2C1_SCL */ +_PAD_CFG_STRUCT(GPP_C20, 0x44000702, 0x0), /* UART2_RXD */ +_PAD_CFG_STRUCT(GPP_C21, 0x44000700, 0x0), /* UART2_TXD */ +_PAD_CFG_STRUCT(GPP_C22, 0x44000700, 0x0), /* UART2_RTS# */ +_PAD_CFG_STRUCT(GPP_C23, 0x44000702, 0x0), /* UART2_CTS# */ + +_PAD_CFG_STRUCT(GPP_D0, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D1, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D2, 0x44000700, 0x0), /* SPI1_MISO */ +_PAD_CFG_STRUCT(GPP_D3, 0x44000700, 0x0), /* SPI1_MOSI */ +_PAD_CFG_STRUCT(GPP_D4, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D5, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D6, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D7, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D8, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D9, 0x40000102, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D10, 0x40000102, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D11, 0x40000102, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D12, 0x40000102, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D13, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D14, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D15, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D16, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D17, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D18, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_D19, 0x44000700, 0x0), /* DMIC_CLK0 */ +_PAD_CFG_STRUCT(GPP_D20, 0x44000700, 0x0), /* DMIC_DATA0 */ +_PAD_CFG_STRUCT(GPP_D21, 0x44000700, 0x0), /* SPI1_IO2 */ +_PAD_CFG_STRUCT(GPP_D22, 0x44000700, 0x0), /* SPI1_IO3 */ +_PAD_CFG_STRUCT(GPP_D23, 0x44000201, 0x1000), /* GPIO */ + +_PAD_CFG_STRUCT(GPP_E0, 0x44000700, 0x0), /* SATAXPCIE0 */ +_PAD_CFG_STRUCT(GPP_E1, 0x44000700, 0x0), /* SATAXPCIE1 */ +_PAD_CFG_STRUCT(GPP_E2, 0x44000702, 0x0), /* SATAXPCIE2 */ +_PAD_CFG_STRUCT(GPP_E3, 0x44000201, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E4, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E5, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E6, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E7, 0x40900100, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E8, 0xffffffff, 0xffffff00),/* RESERVED */ +_PAD_CFG_STRUCT(GPP_E9, 0x44000702, 0x0), /* USB2_OC0# */ +_PAD_CFG_STRUCT(GPP_E10, 0x44000702, 0x0), /* USB2_OC1# */ +_PAD_CFG_STRUCT(GPP_E11, 0x44000702, 0x0), /* USB2_OC2# */ +_PAD_CFG_STRUCT(GPP_E12, 0x44000702, 0x0), /* USB2_OC3# */ +_PAD_CFG_STRUCT(GPP_E13, 0x44000700, 0x0), /* DDPB_HPD0 */ +_PAD_CFG_STRUCT(GPP_E14, 0x44000700, 0x0), /* DDPC_HPD1 */ +_PAD_CFG_STRUCT(GPP_E15, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E16, 0x80880102, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E17, 0x44000702, 0x0), /* EDP_HPD */ +_PAD_CFG_STRUCT(GPP_E18, 0x44000702, 0x0), /* DDPB_CTRLCLK */ +_PAD_CFG_STRUCT(GPP_E19, 0x44000702, 0x1000), /* DDPB_CTRLDATA */ +_PAD_CFG_STRUCT(GPP_E20, 0x44000700, 0x0), /* DDPC_CTRLCLK */ +_PAD_CFG_STRUCT(GPP_E21, 0x44000702, 0x1000), /* DDPC_CTRLDATA */ +_PAD_CFG_STRUCT(GPP_E22, 0x40100000, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_E23, 0x44000201, 0x1000), /* GPIO */ + +_PAD_CFG_STRUCT(GPD0, 0x4000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPD1, 0x4000702, 0x0), /* ACPRESENT */ +_PAD_CFG_STRUCT(GPD2, 0x4000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPD3, 0x4000702, 0x3000), /* PWRBTN# */ +_PAD_CFG_STRUCT(GPD4, 0x4000700, 0x0), /* SLP_S3# */ +_PAD_CFG_STRUCT(GPD5, 0x4000700, 0x0), /* SLP_S4# */ +_PAD_CFG_STRUCT(GPD6, 0x4000601, 0x1000), /* SLP_A# */ +_PAD_CFG_STRUCT(GPD7, 0x4000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPD8, 0x4000700, 0x0), /* SUSCLK */ +_PAD_CFG_STRUCT(GPD9, 0x4000601, 0x1000), /* SLP_WLAN# */ +_PAD_CFG_STRUCT(GPD10, 0x4000601, 0x1000), /* SLP_S5# */ +_PAD_CFG_STRUCT(GPD11, 0x4000201, 0x1000), /* GPIO */ + +_PAD_CFG_STRUCT(GPP_F0, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F1, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F2, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F3, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F4, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F5, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F6, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F7, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F8, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F9, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F10, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F11, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F12, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F13, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F14, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F15, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F16, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F17, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F18, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F19, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F20, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F21, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F22, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_F23, 0x40100100, 0x0), /* GPIO */ + +_PAD_CFG_STRUCT(GPP_G0, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_G1, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_G2, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_G3, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_G4, 0x44000200, 0x0), /* GPIO */ +_PAD_CFG_STRUCT(GPP_G5, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_G6, 0x44000201, 0x1000), /* GPIO */ +_PAD_CFG_STRUCT(GPP_G7, 0x44000201, 0x1000), /* GPIO */ +}; + +#endif + +#endif diff --git a/src/mainboard/acer/aspire_vn7_572g/hda_verb.c b/src/mainboard/acer/aspire_vn7_572g/hda_verb.c new file mode 100644 index 0000000..8cd5f97 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/hda_verb.c @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Purism SPC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0255, /* Codec Vendor / Device ID: Realtek ALC255 */ + 0x10251037, /* Subsystem ID */ + 0x0000000c, /* Number of jacks (NID entries) */ + + 0x0017ff00, /* Function Reset */ + 0x0017ff00, /* Double Function Reset */ + 0x0017ff00, + 0x0017ff00, + + /* Bits 31:28 - Codec Address */ + /* Bits 27:20 - NID */ + /* Bits 19:8 - Verb ID */ + /* Bits 7:0 - Payload */ + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10251037 */ + AZALIA_SUBVENDOR(0x0, 0x10251037), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x12) */ + AZALIA_PIN_CFG(0x0, 0x12, 0x411111c0), + + /* Pin Complex (NID 0x14) */ + AZALIA_PIN_CFG(0x0, 0x14, 0x90172120), + + /* Pin Complex (NID 0x17) */ + AZALIA_PIN_CFG(0x0, 0x17, 0x40000000), + + /* Pin Complex (NID 0x18) */ + AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0), + + /* Pin Complex (NID 0x19) */ + AZALIA_PIN_CFG(0x0, 0x19, 0x411111f0), + + /* Pin Complex (NID 0x1A) */ + AZALIA_PIN_CFG(0x0, 0x1A, 0x411111f0), + + /* Pin Complex (NID 0x1B) */ + AZALIA_PIN_CFG(0x0, 0x1B, 0x411111f0), + + /* Pin Complex (NID 0x1D) */ + AZALIA_PIN_CFG(0x0, 0x1D, 0x40700001), + + /* Pin Complex (NID 0x1E) */ + AZALIA_PIN_CFG(0x0, 0x1E, 0x411111f0), + + /* Pin Complex (NID 0x21) */ + AZALIA_PIN_CFG(0x0, 0x21, 0x02211030), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/acer/aspire_vn7_572g/mainboard.c b/src/mainboard/acer/aspire_vn7_572g/mainboard.c new file mode 100644 index 0000000..462b995 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/mainboard.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Purism SPC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <smbios.h> +#include <string.h> +#include <cbfs.h> + +#define MAX_SERIAL_LENGTH 0x100 + +const char *smbios_mainboard_serial_number(void) +{ + static char serial_number[MAX_SERIAL_LENGTH + 1] = {0}; + struct cbfsf file; + + if (serial_number[0] != 0) + return serial_number; + + if (cbfs_boot_locate(&file, "serial_number", NULL) == 0) { + struct region_device cbfs_region; + size_t serial_len; + + cbfs_file_data(&cbfs_region, &file); + + serial_len = region_device_sz(&cbfs_region); + if (serial_len <= MAX_SERIAL_LENGTH) { + if (rdev_readat(&cbfs_region, serial_number, 0, + serial_len) == serial_len) { + serial_number[serial_len] = 0; + return serial_number; + } + } + } + + strncpy(serial_number, CONFIG_MAINBOARD_SERIAL_NUMBER, + MAX_SERIAL_LENGTH); + + return serial_number; +} diff --git a/src/mainboard/acer/aspire_vn7_572g/ramstage.c b/src/mainboard/acer/aspire_vn7_572g/ramstage.c new file mode 100644 index 0000000..94f8071 --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/ramstage.c @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Intel Corporation + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/ramstage.h> +#include "gpio.h" + +void mainboard_silicon_init_params(FSP_SIL_UPD *params) +{ + /* Configure pads prior to SiliconInit() in case there's any + * dependencies during hardware initialization. */ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/src/mainboard/acer/aspire_vn7_572g/romstage.c b/src/mainboard/acer/aspire_vn7_572g/romstage.c new file mode 100644 index 0000000..86ef5af --- /dev/null +++ b/src/mainboard/acer/aspire_vn7_572g/romstage.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * Copyright (C) 2017 Purism SPC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <assert.h> +#include <soc/romstage.h> +#include <spd_bin.h> +#include <string.h> + +static void mainboard_fill_dq_map_data(void *dq_map_ch0, void *dq_map_ch1) +{ + /* DQ byte map */ + const u8 dq_map[2][12] = { + { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, + 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 }, + { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, + 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } }; + memcpy(dq_map_ch0, dq_map[0], sizeof(dq_map[0])); + memcpy(dq_map_ch1, dq_map[1], sizeof(dq_map[1])); +} + +static void mainboard_fill_dqs_map_data(void *dqs_map_ch0, void *dqs_map_ch1) +{ + /* DQS CPU<>DRAM map */ + const u8 dqs_map[2][8] = { + { 0, 1, 3, 2, 4, 5, 6, 7 }, + { 1, 0, 4, 5, 2, 3, 6, 7 } }; + memcpy(dqs_map_ch0, dqs_map[0], sizeof(dqs_map[0])); + memcpy(dqs_map_ch1, dqs_map[1], sizeof(dqs_map[1])); +} + +static void mainboard_fill_rcomp_res_data(void *rcomp_ptr) +{ + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 121, 81, 100 }; + memcpy(rcomp_ptr, RcompResistor, sizeof(RcompResistor)); +} + +static void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) +{ + /* Rcomp target */ + const u16 RcompTarget[5] = { 100, 40, 20, 20, 26 }; + memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget)); +} + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *mem_cfg; + struct spd_block blk = { + .addr_map = { 0x50, 0x52 }, + }; + + mem_cfg = &mupd->FspmConfig; + + get_spd_smbus(&blk); + dump_spd_info(&blk); + assert(blk.spd_array[0][0] != 0); + + mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0, + &mem_cfg->DqByteMapCh1); + mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0, + &mem_cfg->DqsMapCpu2DramCh1); + mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); + mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); + + mem_cfg->DqPinsInterleaved = TRUE; + mem_cfg->MemorySpdDataLen = blk.len; + mem_cfg->MemorySpdPtr00 = (uintptr_t) blk.spd_array[0]; + mem_cfg->MemorySpdPtr10 = (uintptr_t) blk.spd_array[1]; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/35523 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6340116abfeb2fbd280d143b74d323e4da3566f6 Gerrit-Change-Number: 35523 Gerrit-PatchSet: 1 Gerrit-Owner: Benjamin Doron Gerrit-MessageType: newchange

11 343

Change in coreboot[master]: mb/asus/p8z77-m: New board
by Keith Hui (Code Review) 25 Jan '22

25 Jan '22

Keith Hui has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38988 ) Change subject: mb/asus/p8z77-m: New board ...................................................................... mb/asus/p8z77-m: New board Constructed out of a mix of autoport results, p8z77-m_pro, and inteltool/superiotool dumps. Does not yet boot. Submitting for eyeballs and help. Change-Id: If756e791ddce747cb1706414be8e41e83f88922b Signed-off-by: Keith Hui <buurin(a)gmail.com> --- A src/mainboard/asus/p8z77-m/Kconfig A src/mainboard/asus/p8z77-m/Kconfig.name A src/mainboard/asus/p8z77-m/Makefile.inc A src/mainboard/asus/p8z77-m/acpi/ec.asl A src/mainboard/asus/p8z77-m/acpi/platform.asl A src/mainboard/asus/p8z77-m/acpi/superio.asl A src/mainboard/asus/p8z77-m/acpi_tables.c A src/mainboard/asus/p8z77-m/cmos.default A src/mainboard/asus/p8z77-m/cmos.layout A src/mainboard/asus/p8z77-m/data.vbt A src/mainboard/asus/p8z77-m/devicetree.cb A src/mainboard/asus/p8z77-m/dsdt.asl A src/mainboard/asus/p8z77-m/early_init.c A src/mainboard/asus/p8z77-m/gma-mainboard.ads A src/mainboard/asus/p8z77-m/gpio.c A src/mainboard/asus/p8z77-m/hda_verb.c A src/mainboard/asus/p8z77-m/mainboard.c 17 files changed, 969 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/88/38988/1 diff --git a/src/mainboard/asus/p8z77-m/Kconfig b/src/mainboard/asus/p8z77-m/Kconfig new file mode 100644 index 0000000..260597d --- /dev/null +++ b/src/mainboard/asus/p8z77-m/Kconfig @@ -0,0 +1,45 @@ +## +## This file is part of the coreboot project. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +if BOARD_ASUS_P8Z77_M + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM1 + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select MAINBOARD_HAS_LIBGFXINIT + select INTEL_GMA_HAVE_VBT + select SUPERIO_NUVOTON_NCT6779D + +config MAINBOARD_DIR + string + default "asus/p8z77-m" + +config MAINBOARD_PART_NUMBER + string + default "P8Z77-M" + +config MAX_CPUS + int + default 8 + +endif diff --git a/src/mainboard/asus/p8z77-m/Kconfig.name b/src/mainboard/asus/p8z77-m/Kconfig.name new file mode 100644 index 0000000..a797a5b --- /dev/null +++ b/src/mainboard/asus/p8z77-m/Kconfig.name @@ -0,0 +1,15 @@ +## +## This file is part of the coreboot project. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +config BOARD_ASUS_P8Z77_M + bool "P8Z77-M" diff --git a/src/mainboard/asus/p8z77-m/Makefile.inc b/src/mainboard/asus/p8z77-m/Makefile.inc new file mode 100644 index 0000000..a12efbb --- /dev/null +++ b/src/mainboard/asus/p8z77-m/Makefile.inc @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +bootblock-y += gpio.c +romstage-y += gpio.c + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads +bootblock-y += early_init.c +romstage-y += early_init.c diff --git a/src/mainboard/asus/p8z77-m/acpi/ec.asl b/src/mainboard/asus/p8z77-m/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/acpi/ec.asl diff --git a/src/mainboard/asus/p8z77-m/acpi/platform.asl b/src/mainboard/asus/p8z77-m/acpi/platform.asl new file mode 100644 index 0000000..d2cad26 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/acpi/platform.asl @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* This file is part of the coreboot project. */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ +} diff --git a/src/mainboard/asus/p8z77-m/acpi/superio.asl b/src/mainboard/asus/p8z77-m/acpi/superio.asl new file mode 100644 index 0000000..f2b35ba --- /dev/null +++ b/src/mainboard/asus/p8z77-m/acpi/superio.asl @@ -0,0 +1 @@ +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/asus/p8z77-m/acpi_tables.c b/src/mainboard/asus/p8z77-m/acpi_tables.c new file mode 100644 index 0000000..9c22f19 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/acpi_tables.c @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Vlado Cibic <vladocb(a)protonmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* critical temp that will shutdown the pc == 95C degrees */ + gnvs->tcrt = 95; + + /* temp to start throttling the cpu == 85C */ + gnvs->tpsv = 85; +} diff --git a/src/mainboard/asus/p8z77-m/cmos.default b/src/mainboard/asus/p8z77-m/cmos.default new file mode 100644 index 0000000..725ab98 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/cmos.default @@ -0,0 +1,24 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2019 Vlado Cibic <vladocb(a)protonmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +boot_option=Fallback +debug_level=Debug +gfx_uma_size=224M +nmi=Enable +sata_mode=AHCI +#usb3_xxxx options are only used with MRC blob, ignored else +usb3_mode=Enable +usb3_drv=Enable +usb3_streams=Enable diff --git a/src/mainboard/asus/p8z77-m/cmos.layout b/src/mainboard/asus/p8z77-m/cmos.layout new file mode 100644 index 0000000..da29d1c --- /dev/null +++ b/src/mainboard/asus/p8z77-m/cmos.layout @@ -0,0 +1,185 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2019 Vlado Cibic <vladocb(a)protonmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 3 boot_option +388 4 h 0 reboot_counter + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 4 debug_level +#399 1 r 0 unused +#400 8 r 0 reserved for century byte + +# ----------------------------------------------------------------- +# coreboot config options: southbridge + +# Non Maskable Interrupt(NMI) support, which is an interrupt that may +# occur on a RAM or unrecoverable error. +408 1 e 1 nmi + +409 2 e 5 power_on_after_fail +411 1 e 6 sata_mode + +# ----------------------------------------------------------------- +# coreboot config options: northbridge + +# gfx_uma_size +# Quantity of shared video memory the IGP can use +# +416 5 e 7 gfx_uma_size + +# ----------------------------------------------------------------- +# coreboot config options: usb3 + +# usb3_mode +# Controls how the motherboard's USB3 ports act at boot time +421 2 e 8 usb3_mode + +# usb3_drv +# Load (or not) pre-OS xHCI USB3 bios driver +# +423 1 e 1 usb3_drv + +# usb3_streams +# Streams can provide more speed (as they can use 64Kb packets), +# but they might cause incompatibilities with some devices. +# +424 1 e 1 usb3_streams + +# ----------------------------------------------------------------- +# Sandy/Ivy Bridge MRC Scrambler Seed values +# note: MUST NOT be covered by checksum! +464 32 r 0 mrc_scrambler_seed +496 32 r 0 mrc_scrambler_seed_s3 +528 16 r 0 mrc_scrambler_seed_chk + +# ----------------------------------------------------------------- +# coreboot config options: check sums +544 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations +#ID value text + +# Generic on/off enum +1 0 Disable +1 1 Enable + +# boot_option +3 0 Fallback +3 1 Normal + +# debug_level +4 0 Emergency +4 1 Alert +4 2 Critical +4 3 Error +4 4 Warning +4 5 Notice +4 6 Info +4 7 Debug +4 8 Spew + +# power_on_after_fail +5 0 Disable +5 1 Enable +5 2 Keep + +# sata_mode +6 0 AHCI +6 1 Compatible + +# gfx_uma_size (Intel IGP Video RAM size) +7 0 32M +7 1 64M +7 2 96M +7 3 128M +7 4 160M +7 5 192M +7 6 224M +7 7 256M +7 8 288M +7 9 320M +7 10 352M +7 11 384M +7 12 416M +7 13 448M +7 14 480M +7 15 512M +7 16 544M +7 17 576M +7 18 608M +7 19 640M +7 20 672M +7 21 704M +7 22 736M +7 23 768M +7 24 800M +7 25 832M +7 26 864M +7 27 896M +7 28 928M +7 29 960M +7 30 992M + +# usb3_mode +# Disable = Use the port always as USB 2.0 for compatibility +# Enable = Use the port always as USB 3.0 for speed +# Auto = Initialize the port as USB 2.0, until the OS loads +# xHCI USB 3.0 driver +# SmartAuto = Same as Auto but, if the OS loads the xHCI USB 3.0 driver +# and the computer is reset, keep the USB 3.0 mode. +# +8 0 Disable +8 1 Enable +8 2 Auto +8 3 SmartAuto + +# ----------------------------------------------------------------- +# <startBit[must be byte-aligned]> <endBit[must be byte aligned]> +# <bit where to start storing checksum[must be 16bits-aligned]> +checksums + +checksum 392 431 544 diff --git a/src/mainboard/asus/p8z77-m/data.vbt b/src/mainboard/asus/p8z77-m/data.vbt new file mode 100644 index 0000000..26ab42d --- /dev/null +++ b/src/mainboard/asus/p8z77-m/data.vbt Binary files differ diff --git a/src/mainboard/asus/p8z77-m/devicetree.cb b/src/mainboard/asus/p8z77-m/devicetree.cb new file mode 100644 index 0000000..03a20b9 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/devicetree.cb @@ -0,0 +1,108 @@ +## +## This file is part of the coreboot project. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.ndid" = "3" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + device domain 0x0 on + subsystemid 0x1043 0x84ca inherit + device pci 00.0 on end # Host bridge + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 on end # Internal graphics VGA controller + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "gen1_dec" = "0x000c0291" + register "gen4_dec" = "0x00000000" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" # 0x3=SATAIII + register "sata_port_map" = "0x3f" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x00000c03" + register "xhci_switchable_ports" = "0x0000000f" # the 4 ports + + device pci 14.0 on end # USB 3.0 Controller + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio Audio controller + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 on end # PCIe Port #6 + device pci 1c.6 on end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge PCI-LPC bridge + chip superio/nuvoton/nct6779d + device pnp 2e.1 off end # Parallel + device pnp 2e.2 on # UART A + io 0x60 = 0x3f8 # COM2 address + end + device pnp 2e.3 off end # UART B, IR + device pnp 2e.5 on # PS2 KBC + io 0x60 = 0x0060 # KBC1 base + io 0x62 = 0x0064 # KBC2 base + irq 0x70 = 1 # Keyboard IRQ + irq 0x72 = 12 # Mouse IRQ + + # KBC 12Mhz/A20 speed/sw KBRST + drq 0xf0 = 0x82 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 on end # GPIOs 6-8 + device pnp 2e.8 off end # WDT1 GPIO 0-1 + device pnp 2e.9 off end # GPIO 1-8 + device pnp 2e.a on # ACPI + drq 0xe4 = 0x10 # Enable 3VSBS to power RAM on S3 + drq 0xe7 = 0x10 # 0.5s S3 delay for compatibility + end + device pnp 2e.b off end # HWM, LED + device pnp 2e.d off end # WDT1 + device pnp 2e.e off end # CIR wake-up + device pnp 2e.f on # GPIO PP/OD + drq 0xe6 = 0x7f # GP7 PP + end + device pnp 2e.14 on end # Port 80 UART + device pnp 2e.16 off end # Deep sleep + end + chip drivers/pc80/tpm + device pnp 4e.0 on end # TPM + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/asus/p8z77-m/dsdt.asl b/src/mainboard/asus/p8z77-m/dsdt.asl new file mode 100644 index 0000000..62d44ea --- /dev/null +++ b/src/mainboard/asus/p8z77-m/dsdt.asl @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Vlado Cibic <vladocb(a)protonmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, /* DSDT revision: ACPI 2.0 and up */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 /* OEM revision */ +) +{ + #include "acpi/platform.asl" + #include "acpi/superio.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/common/acpi/platform.asl> + + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/common/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/asus/p8z77-m/early_init.c b/src/mainboard/asus/p8z77-m/early_init.c new file mode 100644 index 0000000..52c0e03 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/early_init.c @@ -0,0 +1,197 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <bootblock_common.h> +#include <device/pnp_ops.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <arch/io.h> +#include <device/pnp.h> +#include <stdint.h> + +#include <superio/nuvoton/common/nuvoton.h> +#include <superio/nuvoton/nct6779d/nct6779d.h> + +#include <option.h> + +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <northbridge/intel/sandybridge/raminit.h> +#include <northbridge/intel/sandybridge/pei_data.h> + +#define SERIAL_DEV PNP_DEV(0x2e, NCT6779D_SP1) + +const struct southbridge_usb_port mainboard_usb_ports[] = { + /* {enable, current, oc_pin} */ + { 1, 2, 0 }, /* Port 0: USB3 front internal header, top */ + { 1, 2, 0 }, /* Port 1: USB3 front internal header, bottom */ + { 1, 2, 1 }, /* Port 2: USB3 rear, ETH top */ + { 1, 2, 1 }, /* Port 3: USB3 rear, ETH bottom */ + { 1, 2, 2 }, /* Port 4: USB2 rear, PS2 top */ + { 1, 2, 2 }, /* Port 5: USB2 rear, PS2 bottom */ + { 1, 2, 3 }, /* Port 6: USB2 internal header USB78, top */ + { 1, 2, 3 }, /* Port 7: USB2 internal header USB78, bottom */ + { 1, 2, 4 }, /* Port 8: USB2 internal header USB910, top */ + { 1, 2, 4 }, /* Port 9: USB2 internal header USB910, bottom */ + { 1, 2, 6 }, /* Port 10: USB2 internal header USB1112, top */ + { 1, 2, 5 }, /* Port 11: USB2 internal header USB1112, bottom */ + { 0, 2, 5 }, /* Port 12: Unused. Asus proprietary DEBUG_PORT ??? */ + { 0, 2, 6 } /* Port 13: Unused. Asus proprietary DEBUG_PORT ??? */ +}; + +/* Global config register values. */ +static const u8 register_values[] = { + /* + * Before accessing CR10, CR11, CR13 and CR14, CR26 [Bit4] must be set to logic 1. + * - NCT6779D datasheet, page 293 + */ + /* reg, value */ + 0x26, (1 << 4), + 0x13, 0xff, /* IRQs 0-15 active low */ + 0x14, 0xff, + 0x1b, 0x60, + 0x22, 0xdf, /* Power down UART B */ + 0x2a, 0x48, /* UART A instead of GPIO8x */ + 0x2c, 0x00, /* PECI */ +}; + +void bootblock_mainboard_early_init(void) +{ + int max = ARRAY_SIZE(register_values); + int i; + + nuvoton_pnp_enter_conf_state(SERIAL_DEV); + + /* Set registers as specified in the register_values[] array. */ + for (i = 0; i < max; i += 2) + pnp_write_config(SERIAL_DEV, register_values[i], register_values[i + 1]); + + pnp_set_logical_device(SERIAL_DEV); + pnp_set_enable(SERIAL_DEV, 0); + pnp_set_iobase(SERIAL_DEV, PNP_IDX_IO0, CONFIG_TTYS0_BASE); + pnp_set_enable(SERIAL_DEV, 1); + nuvoton_pnp_exit_conf_state(SERIAL_DEV); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} + +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; +} + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + /* + * USB3 mode: + * 0 = Disable: work always as USB 2.0(ehci) + * 1 = Enable: work always as USB 3.0(xhci) + * 2 = Auto: work as USB2.0(ehci) until OS loads USB3 xhci driver + * 3 = Smart Auto : same than Auto, but if OS loads USB3 driver + * and reboots, it will keep the USB3.0 speed + */ + int usb3_mode = 1; + get_option(&usb3_mode, "usb3_mode"); + usb3_mode &= 0x3; /* ensure it's 0/1/2/3 only */ + + /* Load USB3 pre-OS xHCI driver */ + int usb3_drv = 1; + get_option(&usb3_drv, "usb3_drv"); + usb3_drv &= 0x1; /* ensure it's 0/1 only */ + + /* Use USB3 xHCI streams */ + int usb3_streams = 1; + get_option(&usb3_streams, "usb3_streams"); + usb3_streams &= 0x1; /* ensure it's 0/1 only */ + + struct pei_data pd = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = CONFIG_HPET_ADDRESS, + .rcba = (uintptr_t)DEFAULT_RCBABASE, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .thermalbase = 0xfed08000, + .system_type = 1, /* 0=Mobile, 1=Desktop/Server */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, /* SMBus mul 2 */ + .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, + .ec_present = 0, /* Asus 2203 bios shows XUECA016, but no EC */ + .gbe_enable = 0, /* Board uses no Intel GbE but a RTL8111F */ + .dimm_channel0_disabled = 0, /* Both DIMM enabled */ + .dimm_channel1_disabled = 0, /* Both DIMM enabled */ + .max_ddr3_freq = 1600, /* 1333=Sandy; 1600=Ivy */ + .usb_port_config = { + /* {enabled, oc_pin, cable len 0x0080=<8inches/20cm} */ + { 1, 0, 0x0080 }, /* USB3 front internal header */ + { 1, 0, 0x0080 }, /* USB3 front internal header */ + { 1, 1, 0x0080 }, /* USB3 ETH top connector */ + { 1, 1, 0x0080 }, /* USB3 ETH botton connector */ + { 1, 2, 0x0080 }, /* USB2 PS2 top connector */ + { 1, 2, 0x0080 }, /* USB2 PS2 botton connector */ + { 1, 3, 0x0080 }, /* USB2 internal header (USB78) */ + { 1, 3, 0x0080 }, /* USB2 internal header (USB78) */ + { 1, 4, 0x0080 }, /* USB2 internal header (USB910) */ + { 1, 4, 0x0080 }, /* USB2 internal header (USB910) */ + { 1, 6, 0x0080 }, /* USB2 internal header (USB1112) */ + { 1, 5, 0x0080 }, /* USB2 internal header (USB1112) */ + { 0, 5, 0x0080 }, /* Unused. Asus DEBUG_PORT ??? */ + { 0, 6, 0x0080 } /* Unused. Asus DEBUG_PORT ??? */ + }, + .usb3 = { + /* 0=Disable; 1=Enable (start at USB3 speed) + * 2=Auto (start as USB2 speed until OS loads) + * 3=Smart Auto (like Auto but keep speed on reboot) + */ + usb3_mode, + /* 4 bit switch mask. 0=not switchable, 1=switchable + * Means once it's loaded the OS, it can swap ports + * from/to EHCI/xHCI. Z77 has four USB3 ports, so 0xf + */ + 0xf, + usb3_drv, /* 1=Load xHCI pre-OS drv */ + /* 0=Don't use xHCI streams for better compatibility + * 1=use xHCI streams for better speed + */ + usb3_streams + }, + /* ASUS P8Z77-M Pro manual says 1.35v DIMMs are supported */ + .ddr3lv_support = 1, + /* PCIe 3.0 support. As we use Ivy Bridge, let's enable it, + * but might cause some system instability ! + */ + .pcie_init = 1, + /* Command Rate. 0=Auto; 1=1N; 2=2N. + * Leave it always at Auto for compatibility & stability + */ + .nmode = 0, + /* DDR refresh rate. 0=Auto based on DRAM's temperature; + * 1=Normal rate for speed; 2=Double rate for stability + */ + .ddr_refresh_rate_config = 0 + }; + + /* copy the data to output PEI */ + *pei_data = pd; +} diff --git a/src/mainboard/asus/p8z77-m/gma-mainboard.ads b/src/mainboard/asus/p8z77-m/gma-mainboard.ads new file mode 100644 index 0000000..d7afe73 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/gma-mainboard.ads @@ -0,0 +1,34 @@ +-- +-- This file is part of the coreboot project. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + -- FIXME: check this + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + Internal); + +end GMA.Mainboard; diff --git a/src/mainboard/asus/p8z77-m/gpio.c b/src/mainboard/asus/p8z77-m/gpio.c new file mode 100644 index 0000000..03e1507 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/gpio.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_NATIVE, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_NATIVE, + .gpio36 = GPIO_MODE_NATIVE, + .gpio37 = GPIO_MODE_NATIVE, + .gpio38 = GPIO_MODE_NATIVE, + .gpio39 = GPIO_MODE_NATIVE, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_GPIO, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_NATIVE, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/asus/p8z77-m/hda_verb.c b/src/mainboard/asus/p8z77-m/hda_verb.c new file mode 100644 index 0000000..f240025 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/hda_verb.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0887, /* Codec Vendor / Device ID: Realtek */ + 0x104384a8, /* Subsystem ID */ + 15, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x104384a8), + AZALIA_PIN_CFG(0, 0x11, 0x90430130), + AZALIA_PIN_CFG(0, 0x12, 0x411111f0), + AZALIA_PIN_CFG(0, 0x14, 0x01014410), + AZALIA_PIN_CFG(0, 0x15, 0x411111f0), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x17, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x01a19c50), + AZALIA_PIN_CFG(0, 0x19, 0x02a19c60), + AZALIA_PIN_CFG(0, 0x1a, 0x0181345f), + AZALIA_PIN_CFG(0, 0x1b, 0x02214c20), + AZALIA_PIN_CFG(0, 0x1c, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x4016c629), + AZALIA_PIN_CFG(0, 0x1e, 0x01446140), + AZALIA_PIN_CFG(0, 0x1f, 0x411111f0), + + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(3, 0x80860101), + AZALIA_PIN_CFG(3, 0x05, 0x58560010), + AZALIA_PIN_CFG(3, 0x06, 0x58560020), + AZALIA_PIN_CFG(3, 0x07, 0x18560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/asus/p8z77-m/mainboard.c b/src/mainboard/asus/p8z77-m/mainboard.c new file mode 100644 index 0000000..b97b648 --- /dev/null +++ b/src/mainboard/asus/p8z77-m/mainboard.c @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* This file is part of the coreboot project. */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> + +static void mainboard_enable(struct device *dev) +{ + /* FIXME: fix those values*/ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; -- To view, visit https://review.coreboot.org/c/coreboot/+/38988 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If756e791ddce747cb1706414be8e41e83f88922b Gerrit-Change-Number: 38988 Gerrit-PatchSet: 1 Gerrit-Owner: Keith Hui <buurin(a)gmail.com> Gerrit-MessageType: newchange

6 52

Change in coreboot[master]: Makefile.inc: Add `-fno-pie` to `ADAFLAGS_common`
by Paul Menzel (Code Review) 23 Jan '22

23 Jan '22

Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43759 ) Change subject: Makefile.inc: Add `-fno-pie` to `ADAFLAGS_common` ...................................................................... Makefile.inc: Add `-fno-pie` to `ADAFLAGS_common` Change-Id: I6661937906d95c130c6099f598d61b21e958fd85 Signed-off-by: Paul Menzel <pmenzel(a)molgen.mpg.de> --- M Makefile.inc M src/lib/gnat/Makefile.inc 2 files changed, 2 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/59/43759/1 diff --git a/Makefile.inc b/Makefile.inc index 89bb3e4..ca9f10e 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -439,6 +439,7 @@ ADAFLAGS_common += -Wstrict-aliasing -Wshadow ADAFLAGS_common += -fno-common -fomit-frame-pointer ADAFLAGS_common += -ffunction-sections -fdata-sections +ADAFLAGS_common += -fno-pie # Ada warning options: # # a Activate most optional warnings. diff --git a/src/lib/gnat/Makefile.inc b/src/lib/gnat/Makefile.inc index e740564..065ba71 100644 --- a/src/lib/gnat/Makefile.inc +++ b/src/lib/gnat/Makefile.inc @@ -13,6 +13,7 @@ -I$$(src)/lib/gnat/ \ $$(GCC_ADAFLAGS_$(1)) \ -Werror \ + -fno-pie \ libgnat-$(1)-y += a-unccon.ads libgnat-$(1)-y += ada.ads -- To view, visit https://review.coreboot.org/c/coreboot/+/43759 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6661937906d95c130c6099f598d61b21e958fd85 Gerrit-Change-Number: 43759 Gerrit-PatchSet: 1 Gerrit-Owner: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 10

Change in coreboot[master]: soc/intel/elkhartlake: Add FSP-T support
by Lean Sheng Tan (Code Review) 19 Jan '22

19 Jan '22

Lean Sheng Tan has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45079 ) Change subject: soc/intel/elkhartlake: Add FSP-T support ...................................................................... soc/intel/elkhartlake: Add FSP-T support 1. Add FSP-T related UPD settings in bootblock.c 2. Set FSP-T as default 3. Add choice option to select CAR implementation Signed-off-by: Tan, Lean Sheng <lean.sheng.tan(a)intel.com> Change-Id: I7d7f14e4e8be8755e01d9a3988608d5d47145496 --- M src/soc/intel/elkhartlake/Kconfig M src/soc/intel/elkhartlake/bootblock/bootblock.c 2 files changed, 61 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/79/45079/1 diff --git a/src/soc/intel/elkhartlake/Kconfig b/src/soc/intel/elkhartlake/Kconfig index b5462ff..fc67372 100644 --- a/src/soc/intel/elkhartlake/Kconfig +++ b/src/soc/intel/elkhartlake/Kconfig @@ -24,7 +24,6 @@ select INTEL_DESCRIPTOR_MODE_CAPABLE select HAVE_SMI_HANDLER select IDT_IN_EVERY_STAGE - select INTEL_CAR_NEM #TODO - Enable INTEL_CAR_NEM_ENHANCED select INTEL_GMA_ACPI select INTEL_GMA_ADD_VBT if RUN_FSP_GOP select IOAPIC @@ -61,6 +60,7 @@ select UDELAY_TSC select UDK_202005_BINDING select DISPLAY_FSP_VERSION_INFO + select FSP_T_XIP if FSP_CAR config DCACHE_RAM_BASE default 0xfef00000 @@ -183,6 +183,30 @@ hex default 0x200000 +choice + prompt "Cache-as-ram implementation" + default USE_ELKHARTLAKE_FSP_CAR + help + This option allows you to select how cache-as-ram (CAR) is set up. + +config USE_ELKHARTLAKE_CAR_NEM + bool "Enhanced Non-evict mode" + select INTEL_CAR_NEM + help + A current limitation of NEM (Non-Evict mode) is that code and data + sizes are derived from the requirement to not write out any modified + cache line. With NEM, if there is no physical memory behind the + cached area, the modified data will be lost and NEM results will be + inconsistent. + +config USE_ELKHARTLAKE_FSP_CAR + bool "Use FSP CAR" + select FSP_CAR + help + Use FSP APIs to initialize and tear down the Cache-As-Ram. + +endchoice + config FSP_HEADER_PATH default "src/vendorcode/intel/fsp/fsp2_0/elkhartlake/" diff --git a/src/soc/intel/elkhartlake/bootblock/bootblock.c b/src/soc/intel/elkhartlake/bootblock/bootblock.c index 96e6268..d6e20ca 100644 --- a/src/soc/intel/elkhartlake/bootblock/bootblock.c +++ b/src/soc/intel/elkhartlake/bootblock/bootblock.c @@ -6,6 +6,42 @@ #include <intelblocks/uart.h> #include <soc/bootblock.h> +#if CONFIG(FSP_CAR) +#include <FsptUpd.h> + +const FSPT_UPD temp_ram_init_params = { + .FspUpdHeader = { + .Signature = 0x545F4450554C4845ULL, /* 'EHLUPD_T' */ + .Revision = 1, + .Reserved = {0}, + }, + .FsptCoreUpd = { + .MicrocodeRegionBase = 0, + .MicrocodeRegionSize = 0, + .CodeRegionBase = 0xff000000, + .CodeRegionSize = 0x1000000, + }, + .FsptConfig = { + .PcdSerialIoUartDebugEnable = 1, + .PcdSerialIoUartNumber = 2, + .PcdSerialIoUartMode = 2, + .PcdSerialIoUartBaudRate = 115200, + .PcdPciExpressBaseAddress = 0xc0000000, + .PcdPciExpressRegionLength = 0x10000000, + .PcdSerialIoUartParity = 1, + .PcdSerialIoUartDataBits = 8, + .PcdSerialIoUartStopBits = 1, + .PcdSerialIoUartAutoFlow = 0, + .PcdSerialIoUartRxPinMux = 0, + .PcdSerialIoUartTxPinMux = 0, + .PcdSerialIoUartRtsPinMux = 0, + .PcdSerialIoUartCtsPinMux = 0, + .PcdLpcUartDebugEnable = 1, + }, + .UpdTerminator = 0x55AA, +}; +#endif + asmlinkage void bootblock_c_entry(uint64_t base_timestamp) { /* Call lib/bootblock.c main */ -- To view, visit https://review.coreboot.org/c/coreboot/+/45079 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7d7f14e4e8be8755e01d9a3988608d5d47145496 Gerrit-Change-Number: 45079 Gerrit-PatchSet: 1 Gerrit-Owner: Lean Sheng Tan <lean.sheng.tan(a)intel.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

7 10

Change in coreboot[master]: sb/intel/common/firmware: add ifd update option
by Marcello Sylvester Bauer (Code Review) 07 Jan '22

07 Jan '22

Marcello Sylvester Bauer has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38719 ) Change subject: sb/intel/common/firmware: add ifd update option ...................................................................... sb/intel/common/firmware: add ifd update option Add a Kconfig option to update the ifd descriptor regions by providing a flashrom layout file. depends on: https://review.coreboot.org/c/coreboot/+/38711 -> Id3db09291af2bd2e759c283e316afd5da1fb4ca7 Change-Id: I41914f83aca443551b93f6e44b3aa975076accbe Signed-off-by: Marcello Sylvester Bauer <sylv(a)sylv.io> --- M src/southbridge/intel/common/firmware/Kconfig M src/southbridge/intel/common/firmware/Makefile.inc 2 files changed, 22 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/19/38719/1 diff --git a/src/southbridge/intel/common/firmware/Kconfig b/src/southbridge/intel/common/firmware/Kconfig index eb63d34..99d99bf 100644 --- a/src/southbridge/intel/common/firmware/Kconfig +++ b/src/southbridge/intel/common/firmware/Kconfig @@ -38,6 +38,15 @@ default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin" depends on HAVE_IFD_BIN +config HAVE_IFD_BIN_LAYOUT + bool "update regions using a flashrom layout file" + default false + depends on HAVE_IFD_BIN + +config IFD_BIN_LAYOUT_PATH + string "Path and filename flashrom layout file" + depends on HAVE_IFD_BIN_LAYOUT + config HAVE_ME_BIN bool "Add Intel ME/TXE firmware" depends on HAVE_IFD_BIN diff --git a/src/southbridge/intel/common/firmware/Makefile.inc b/src/southbridge/intel/common/firmware/Makefile.inc index 5f3212f..2fc685e 100644 --- a/src/southbridge/intel/common/firmware/Makefile.inc +++ b/src/southbridge/intel/common/firmware/Makefile.inc @@ -27,6 +27,10 @@ endif IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH) +ifeq ($(CONFIG_HAVE_IFD_BIN_LAYOUT),y) +IFD_BIN_PATH := $(obj)/descriptor-new.bin +endif + ifneq ($(call strip_quotes,$(CONFIG_IFD_CHIPSET)),) IFDTOOL_USE_CHIPSET := -p $(CONFIG_IFD_CHIPSET) endif @@ -42,6 +46,15 @@ add_intel_firmware: $(call strip_quotes,$(CONFIG_EC_BIN_PATH)) endif add_intel_firmware: $(obj)/coreboot.pre $(IFDTOOL) +ifeq ($(CONFIG_HAVE_IFD_BIN_LAYOUT),y) + printf " IFDTOOL Update Intel Firmware Descriptor\n" + cp $(CONFIG_IFD_BIN_PATH) $(obj)/descriptor-old.bin + $(objutil)/ifdtool/ifdtool \ + $(IFDTOOL_USE_CHIPSET) \ + -n $(CONFIG_IFD_BIN_LAYOUT_PATH) \ + $(obj)/descriptor-old.bin + mv $(obj)/descriptor-old.bin.new $(obj)/descriptor-new.bin +endif printf " DD Adding Intel Firmware Descriptor\n" dd if=$(IFD_BIN_PATH) \ of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 -- To view, visit https://review.coreboot.org/c/coreboot/+/38719 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I41914f83aca443551b93f6e44b3aa975076accbe Gerrit-Change-Number: 38719 Gerrit-PatchSet: 1 Gerrit-Owner: Marcello Sylvester Bauer <sylv(a)sylv.io> Gerrit-MessageType: newchange

3 14

Change in coreboot[master]: cpu/intel/model_206ax: Add overclocking support
by Angel Pons (Code Review) 25 Dec '21

25 Dec '21

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42547 ) Change subject: cpu/intel/model_206ax: Add overclocking support ...................................................................... cpu/intel/model_206ax: Add overclocking support Add a Kconfig option to force Turbo Ratio values to the maximum possible value, which is the maximum non-turbo ratio plus the number of OC bins. Tested on Asus P8Z77-V LX2 with an i5-3330, CPU now runs at 3.4 GHz. Change-Id: I60bef32bfdde3c32a11f07afff64fc83d65fd3f1 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/cpu/intel/model_206ax/Kconfig M src/cpu/intel/model_206ax/model_206ax.h M src/cpu/intel/model_206ax/model_206ax_init.c 3 files changed, 55 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/47/42547/1 diff --git a/src/cpu/intel/model_206ax/Kconfig b/src/cpu/intel/model_206ax/Kconfig index c6a5020..df78524 100644 --- a/src/cpu/intel/model_206ax/Kconfig +++ b/src/cpu/intel/model_206ax/Kconfig @@ -38,4 +38,13 @@ int default 8 +config FORCE_MAX_TURBO_RATIO + bool "Force turbo ratios to the maximum possible value" + default n + help + By selecting this, all core turbo ratios will be set to the maximum possible value, + which is the maximum non-turbo ratio of the CPU plus the number of overclocking bins + by which the CPU can be overclocked. This is an overclocking option and therefore is + dangerous to enable, especially on mobile platforms with a limited cooling solution! + endif diff --git a/src/cpu/intel/model_206ax/model_206ax.h b/src/cpu/intel/model_206ax/model_206ax.h index e24993c..7ac3ec9 100644 --- a/src/cpu/intel/model_206ax/model_206ax.h +++ b/src/cpu/intel/model_206ax/model_206ax.h @@ -18,6 +18,7 @@ #define MSR_PIC_MSG_CONTROL 0x2e #define MSR_PLATFORM_INFO 0xce #define PLATFORM_INFO_SET_TDP (1 << 29) +#define PLATFORM_INFO_RATIO_LIMIT (1 << 28) #define MSR_MISC_PWR_MGMT 0x1aa #define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0) diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c index e69d4fa..de4392d 100644 --- a/src/cpu/intel/model_206ax/model_206ax_init.c +++ b/src/cpu/intel/model_206ax/model_206ax_init.c @@ -14,6 +14,7 @@ #include <cpu/intel/turbo.h> #include <cpu/x86/cache.h> #include <cpu/x86/name.h> +#include <stdint.h> #include "model_206ax.h" #include "chip.h" #include <cpu/intel/smm_reloc.h> @@ -439,6 +440,47 @@ printk(BIOS_INFO, "CPU: VT %ssupported\n", mode[vt]); } +static void xe_init(void) +{ + msr_t msr; + + /* If not enabled, do not touch anything */ + if (!CONFIG(FORCE_MAX_TURBO_RATIO)) { + printk(BIOS_DEBUG, "XE: not overriding Turbo Ratio limits\n"); + return; + } + + /* Get the number of OC bins */ + msr = rdmsr(MSR_FLEX_RATIO); + const uint8_t oc_bins = (msr.lo >> 17) & 0x7; + + /* Ensure that the preconditions for XE are true */ + msr = rdmsr(MSR_PLATFORM_INFO); + if (!(cpuid_eax(1) >= 0x206a3 && (msr.lo & PLATFORM_INFO_RATIO_LIMIT) && oc_bins)) { + + printk(BIOS_WARNING, "XE: Cannot configure XE on a non-XE processor\n"); + return; + } + + /* Obtain maximum non-turbo ratio from MSR_PLATFORM_INFO */ + const uint8_t max_non_turbo = (msr.lo >> 8) & 0xff; + + /* Now do the deed */ + msr = rdmsr(MSR_TURBO_RATIO_LIMIT); + + msr.lo = 0; + msr.lo |= (max_non_turbo + oc_bins) << 0; + msr.lo |= (max_non_turbo + oc_bins) << 8; + msr.lo |= (max_non_turbo + oc_bins) << 16; + msr.lo |= (max_non_turbo + oc_bins) << 24; + + printk(BIOS_NOTICE, "XE: Setting Turbo Ratio to %d... ", max_non_turbo + oc_bins); + + wrmsr(MSR_TURBO_RATIO_LIMIT, msr); + + printk(BIOS_NOTICE, "done.\n"); +} + static void model_206ax_init(struct device *cpu) { @@ -481,6 +523,9 @@ /* Enable Turbo */ enable_turbo(); + + /* Crank up the turbo ratio, if possible and desired */ + xe_init(); } /* MP initialization support. */ -- To view, visit https://review.coreboot.org/c/coreboot/+/42547 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I60bef32bfdde3c32a11f07afff64fc83d65fd3f1 Gerrit-Change-Number: 42547 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

4 10

Change in coreboot[master]: mb/asrock/h77pro4-m: add new mainboard
by Michael Büchler (Code Review) 23 Dec '21

23 Dec '21

Michael Büchler has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45317 ) Change subject: mb/asrock/h77pro4-m: add new mainboard ...................................................................... mb/asrock/h77pro4-m: add new mainboard This adds a new port for the ASRock H77 Pro4-M motherboard. It is microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3 SDRAM. The port was initially done with autoport. It is quite similar to the ASRock B75 Pro4-M which is already supported by coreboot. Working: - Console output on the serial port of the Super I/O - Native RAM initialization with two DIMMs - Core i5-2500 CPU Not working: - Currently fails during PCIe bus scans Untested: - Ivy Bridge - All four DIMM slots - The rest Change-Id: Ic2c51bf7babd9dfcbaf69a5019b2a034762052f2 Signed-off-by: Michael Büchler <michael.buechler(a)posteo.net> --- A src/mainboard/asrock/h77pro4-m/Kconfig A src/mainboard/asrock/h77pro4-m/Kconfig.name A src/mainboard/asrock/h77pro4-m/Makefile.inc A src/mainboard/asrock/h77pro4-m/acpi/ec.asl A src/mainboard/asrock/h77pro4-m/acpi/platform.asl A src/mainboard/asrock/h77pro4-m/acpi/superio.asl A src/mainboard/asrock/h77pro4-m/acpi_tables.c A src/mainboard/asrock/h77pro4-m/board_info.txt A src/mainboard/asrock/h77pro4-m/devicetree.cb A src/mainboard/asrock/h77pro4-m/dsdt.asl A src/mainboard/asrock/h77pro4-m/early_init.c A src/mainboard/asrock/h77pro4-m/gma-mainboard.ads A src/mainboard/asrock/h77pro4-m/gpio.c A src/mainboard/asrock/h77pro4-m/hda_verb.c A src/mainboard/asrock/h77pro4-m/mainboard.c 15 files changed, 612 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/17/45317/1 diff --git a/src/mainboard/asrock/h77pro4-m/Kconfig b/src/mainboard/asrock/h77pro4-m/Kconfig new file mode 100644 index 0000000..daa1526 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/Kconfig @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +if BOARD_ASROCK_H77PRO4_M + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select SUPERIO_NUVOTON_NCT6776 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select MAINBOARD_HAS_LIBGFXINIT # FIXME: check this + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select USE_NATIVE_RAMINIT + select DRIVERS_ASMEDIA_ASPM_BLACKLIST # FIXME copied from B75 Pro3M + +config MAINBOARD_DIR + string + default asrock/h77pro4-m + +config MAINBOARD_PART_NUMBER + string + default "H77 Pro4-M" + +config VGA_BIOS_FILE + string + default "pci8086,0152.rom" + +config VGA_BIOS_ID + string + default "8086,0152" + +#config DRAM_RESET_GATE_GPIO # FIXME: check this +# int +# default 60 +# +#config USBDEBUG_HCD_INDEX # FIXME: check this +# int +# default 2 +endif diff --git a/src/mainboard/asrock/h77pro4-m/Kconfig.name b/src/mainboard/asrock/h77pro4-m/Kconfig.name new file mode 100644 index 0000000..03873b9 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ASROCK_H77PRO4_M + bool "H77 Pro4-M" diff --git a/src/mainboard/asrock/h77pro4-m/Makefile.inc b/src/mainboard/asrock/h77pro4-m/Makefile.inc new file mode 100644 index 0000000..a0d1155 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/Makefile.inc @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only + +bootblock-y += early_init.c +bootblock-y += gpio.c +romstage-y += early_init.c +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/asrock/h77pro4-m/acpi/ec.asl b/src/mainboard/asrock/h77pro4-m/acpi/ec.asl new file mode 100644 index 0000000..2997587 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/acpi/ec.asl @@ -0,0 +1 @@ +/* dummy */ diff --git a/src/mainboard/asrock/h77pro4-m/acpi/platform.asl b/src/mainboard/asrock/h77pro4-m/acpi/platform.asl new file mode 100644 index 0000000..146be65 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/acpi/platform.asl @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +Method(_WAK, 1) +{ + Return(Package() {0, 0}) +} + +Method(_PTS, 1) +{ +} diff --git a/src/mainboard/asrock/h77pro4-m/acpi/superio.asl b/src/mainboard/asrock/h77pro4-m/acpi/superio.asl new file mode 100644 index 0000000..1eae4b2 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/acpi/superio.asl @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#undef SUPERIO_DEV +#undef SUPERIO_PNP_BASE +#define SUPERIO_DEV SIO0 +#define SUPERIO_PNP_BASE 0x2e + +#define NCT6776_SHOW_SP1 1 +#define NCT6776_SHOW_KBC 1 + +#include "superio/nuvoton/nct6776/acpi/superio.asl" diff --git a/src/mainboard/asrock/h77pro4-m/acpi_tables.c b/src/mainboard/asrock/h77pro4-m/acpi_tables.c new file mode 100644 index 0000000..f8364ab --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/acpi_tables.c @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi_gnvs.h> +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(struct global_nvs *gnvs) +{ + /* The lid is open by default. */ + gnvs->lids = 1; + + /* Temperature at which OS will shutdown */ + gnvs->tcrt = 100; + /* Temperature at which OS will throttle CPU */ + gnvs->tpsv = 90; +} diff --git a/src/mainboard/asrock/h77pro4-m/board_info.txt b/src/mainboard/asrock/h77pro4-m/board_info.txt new file mode 100644 index 0000000..5f86088d --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.asrock.com/mb/Intel/H77%20Pro4-M/ +ROM package: DIP-8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y +Release year: 2012 diff --git a/src/mainboard/asrock/h77pro4-m/devicetree.cb b/src/mainboard/asrock/h77pro4-m/devicetree.cb new file mode 100644 index 0000000..8c5d0e5 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/devicetree.cb @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +chip northbridge/intel/sandybridge # FIXME: GPU registers may not always apply. + #register "gfx.use_spread_spectrum_clock" = "0" # from B75 Pro3-M + #register "gfx" = "GMA_STATIC_DISPLAYS(0)" # from autoport + register "gpu_cpu_backlight" = "0x00000000" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "0" + register "gpu_panel_power_backlight_on_delay" = "0" + register "gpu_panel_power_cycle_delay" = "4" + register "gpu_panel_power_down_delay" = "0" + register "gpu_panel_power_up_delay" = "0" + register "gpu_pch_backlight" = "0x00000000" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on + end + device lapic 0xacac off + end + end + end + device domain 0x0 on + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x1849 0x0100 + end + device pci 01.0 off # PEG + end + device pci 02.0 on # iGPU + subsystemid 0x1849 0x0102 + end + chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0291" + register "gen2_dec" = "0x000c0241" + register "gen3_dec" = "0x000c0251" + register "gen4_dec" = "0x00000000" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "0" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x3f" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x00000c03" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x1849 0x1e31 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x1849 0x1e3a + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1849 0x1e2d + end + device pci 1b.0 on # High Definition Audio + subsystemid 0x1849 0x8892 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x1849 0x1e10 + end + device pci 1c.1 off # PCIe Port #2 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 on # PCIe Port #6 - RTL8111E GbE + subsystemid 0x1849 0x1e1a + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 on # PCIe Port #8 - ASM1061 SATA Controller + subsystemid 0x1849 0x1e1e + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1849 0x1e26 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge + subsystemid 0x1849 0x1e4a + chip superio/nuvoton/nct6776 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Parallel port + # TODO verify + # global + irq 0x1c = 0x80 + irq 0x27 = 0xc0 + irq 0x2a = 0x62 + # parallel port + io 0x60 = 0x378 + irq 0x70 = 5 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off end # COM2, IR + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GPIO6-9 + device pnp 2e.8 off end # WDT1, GPIO0, GPIO1, GPIOA + device pnp 2e.9 off end # GPIO2-5 + device pnp 2e.a on # ACPI + # TODO verify + irq 0xe0 = 0x01 + irq 0xe3 = 0x14 + irq 0xe6 = 0x4c + #irq 0xe9 = 0x02 + irq 0xf0 = 0x20 + end + device pnp 2e.b off end # HWM, front panel LED + device pnp 2e.d on end # VID + device pnp 2e.e off end # CIR WAKE-UP + device pnp 2e.f on end # GPIO Push-Pull or Open-drain + device pnp 2e.14 on end # SVID + device pnp 2e.16 on end # Deep Sleep + device pnp 2e.17 on end # GPIOA + end + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x1849 0x1e02 + end + device pci 1f.3 on # SMBus + subsystemid 0x1849 0x1e22 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + end +end diff --git a/src/mainboard/asrock/h77pro4-m/dsdt.asl b/src/mainboard/asrock/h77pro4-m/dsdt.asl new file mode 100644 index 0000000..38f5325 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/dsdt.asl @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + + +#include <acpi/acpi.h> + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, /* DSDT revision: ACPI 2.0 and up */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 /* OEM revision */ +) +{ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/common/acpi/platform.asl> + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/common/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/asrock/h77pro4-m/early_init.c b/src/mainboard/asrock/h77pro4-m/early_init.c new file mode 100644 index 0000000..ca79de8 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/early_init.c @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootblock_common.h> +#include <device/pci_ops.h> +#include <device/pci_def.h> +#include <device/pnp_ops.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <superio/nuvoton/nct6776/nct6776.h> +#include <superio/nuvoton/common/nuvoton.h> + +#define SERIAL_DEV PNP_DEV(0x2e, NCT6776_SP1) + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 1, 1, 2 }, + { 1, 1, 2 }, + { 1, 0, 3 }, + { 1, 0, 3 }, + { 1, 0, 4 }, + { 1, 0, 4 }, + { 1, 0, 6 }, + { 1, 1, 5 }, + { 1, 1, 5 }, + { 1, 0, 6 }, +}; + +void bootblock_mainboard_early_init(void) +{ + /* Set GPIOs on superio, enable UART */ + nuvoton_pnp_enter_conf_state(SERIAL_DEV); + pnp_set_logical_device(SERIAL_DEV); + + pnp_write_config(SERIAL_DEV, 0x1b, 0x68); // bit 4 now cleared -> pin 95 GP24 + pnp_write_config(SERIAL_DEV, 0x1c, 0x80); // Pin 54 AFD#, pin 55 STB# + // default 0x64, vendor BIOS 0x5c + // bit 3 '1' -> CPUFANOUT push-pull instead of open drain + // bit 4 '1' -> SYSFANOUT push-pull instead of open drain + // bit 5 '0' -> AUXFANOUT open drain instead of push-pull + pnp_write_config(SERIAL_DEV, 0x24, 0x5c); // Pin 88-93 GP75-GP70, Pin 86-87 GP77-76 + pnp_write_config(SERIAL_DEV, 0x27, 0xc0); // Pin 88-93 GP75-GP70, Pin 86-87 GP77-76 + // default 0xc0 (bits 7,6 set), vendor BIOS 0x62 (bit 7 cleared, bit 1 set) + // bit 7 is '0' --> pins 29-36 COM A instead of GPIO8 (GP8*) + // bit 6 is '1' --> pins 116-123 are VIDI[7-0] + // bit 1 is '1' --> pin 56,57 are GP23,22 instead of MCLK,MDAT + // bit 0 is '0' --> pins 58,59 stay as KCLK,KDAT + pnp_write_config(SERIAL_DEV, 0x2a, 0x62); // Pin 29-36 COM A + pnp_write_config(SERIAL_DEV, 0x2b, 0x08); // Pin 81 GP32 instead of CPUPWRGD + pnp_write_config(SERIAL_DEV, 0x2c, 0x80); // Pin 113,115 GPA0,PECI instead of TSIC,TSID + + // FIXME 0x13,0x14 "Device IRQ Polarity Selection" are set by the vendor BIOS + + /* random note + * 24M_48M_SEL strap can be read on config reg 0x2f bit 0, it's '1' -> 48 MHz + * also LPT_EN is '1' on bit 1 of 0x2f -> LPT enabled + */ + + nuvoton_pnp_exit_conf_state(SERIAL_DEV); + + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + // generated by autoport + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1405); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0000); +} + +/* FIXME: Put proper SPD map here. */ +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); + read_spd(&spd[2], 0x52, id_only); + read_spd(&spd[3], 0x53, id_only); +} diff --git a/src/mainboard/asrock/h77pro4-m/gma-mainboard.ads b/src/mainboard/asrock/h77pro4-m/gma-mainboard.ads new file mode 100644 index 0000000..133fde5 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/gma-mainboard.ads @@ -0,0 +1,23 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + -- FIXME: check this + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + LVDS, + eDP); + +end GMA.Mainboard; diff --git a/src/mainboard/asrock/h77pro4-m/gpio.c b/src/mainboard/asrock/h77pro4-m/gpio.c new file mode 100644 index 0000000..84f4564 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/gpio.c @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_NATIVE, + .gpio3 = GPIO_MODE_NATIVE, + .gpio4 = GPIO_MODE_NATIVE, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_NATIVE, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_NATIVE, + .gpio36 = GPIO_MODE_NATIVE, + .gpio37 = GPIO_MODE_NATIVE, + .gpio38 = GPIO_MODE_NATIVE, + .gpio39 = GPIO_MODE_NATIVE, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_NATIVE, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_NATIVE, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_NATIVE, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_GPIO, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/asrock/h77pro4-m/hda_verb.c b/src/mainboard/asrock/h77pro4-m/hda_verb.c new file mode 100644 index 0000000..9998266 --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/hda_verb.c @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0892, /* Codec Vendor / Device ID: Realtek */ + 0x18498892, /* Subsystem ID */ + 15, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x18498892), + AZALIA_PIN_CFG(0, 0x11, 0x411111f0), + AZALIA_PIN_CFG(0, 0x12, 0x411111f0), + AZALIA_PIN_CFG(0, 0x14, 0x01014010), + AZALIA_PIN_CFG(0, 0x15, 0x01011012), + AZALIA_PIN_CFG(0, 0x16, 0x01016011), + AZALIA_PIN_CFG(0, 0x17, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x01a19840), + AZALIA_PIN_CFG(0, 0x19, 0x02a19950), + AZALIA_PIN_CFG(0, 0x1a, 0x0181304f), + AZALIA_PIN_CFG(0, 0x1b, 0x02214120), + AZALIA_PIN_CFG(0, 0x1c, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x4005e601), + AZALIA_PIN_CFG(0, 0x1e, 0x01452130), + AZALIA_PIN_CFG(0, 0x1f, 0x411111f0), + + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(3, 0x80860101), + AZALIA_PIN_CFG(3, 0x05, 0x18560010), + AZALIA_PIN_CFG(3, 0x06, 0x58560020), + AZALIA_PIN_CFG(3, 0x07, 0x18560030), + +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/asrock/h77pro4-m/mainboard.c b/src/mainboard/asrock/h77pro4-m/mainboard.c new file mode 100644 index 0000000..4322c1e --- /dev/null +++ b/src/mainboard/asrock/h77pro4-m/mainboard.c @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> + +static void mainboard_enable(struct device *dev) +{ + /* FIXME: fix these values. */ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; -- To view, visit https://review.coreboot.org/c/coreboot/+/45317 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic2c51bf7babd9dfcbaf69a5019b2a034762052f2 Gerrit-Change-Number: 45317 Gerrit-PatchSet: 1 Gerrit-Owner: Michael Büchler <michael.buechler(a)posteo.net> Gerrit-MessageType: newchange

6 37

Change in coreboot[master]: [WIP] nb/intel/sandybridge: Change memory map
by Angel Pons (Code Review) 23 Dec '21

23 Dec '21

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44344 ) Change subject: [WIP] nb/intel/sandybridge: Change memory map ...................................................................... [WIP] nb/intel/sandybridge: Change memory map This silences a complaint from Linux about a reserved memory range. Change-Id: Id57e9902d7bd76b8d57f02d5db25dba3360cd5d7 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/northbridge/intel/sandybridge/raminit_common.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/44344/1 diff --git a/src/northbridge/intel/sandybridge/raminit_common.c b/src/northbridge/intel/sandybridge/raminit_common.c index 6588db5..d883a77 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.c +++ b/src/northbridge/intel/sandybridge/raminit_common.c @@ -448,7 +448,7 @@ mestolenbase = tom - me_uma_size; - toludbase = MIN(4096 - mmiosize + gfxstolen + gttsize + tsegsize, tom - me_uma_size); + toludbase = MIN(4096 - mmiosize + gfxstolen + gttsize, tom - me_uma_size); gfxstolenbase = toludbase - gfxstolen; gttbase = gfxstolenbase - gttsize; -- To view, visit https://review.coreboot.org/c/coreboot/+/44344 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id57e9902d7bd76b8d57f02d5db25dba3360cd5d7 Gerrit-Change-Number: 44344 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

1 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit November 2020