coreboot-gerrit August 2019

coreboot-gerrit@coreboot.org

1 participants
1942 discussions

Change in coreboot[master]: mb/google/mistral: Store developer mode status in coreboot table
by Patrick Georgi (Code Review) 11 Mar '20

11 Mar '20

Patrick Georgi has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34674 ) Change subject: mb/google/mistral: Store developer mode status in coreboot table ...................................................................... mb/google/mistral: Store developer mode status in coreboot table It's needed downstream and the recent vboot rework dropped the information when killing the hand-off block. Change-Id: I411eb8ee6783402db6d4443a6ea1026cf7ad3ae3 Signed-off-by: Patrick Georgi <pgeorgi(a)google.com> --- M src/mainboard/google/mistral/mainboard.c 1 file changed, 21 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/34674/1 diff --git a/src/mainboard/google/mistral/mainboard.c b/src/mainboard/google/mistral/mainboard.c index d50758c..b350b27 100644 --- a/src/mainboard/google/mistral/mainboard.c +++ b/src/mainboard/google/mistral/mainboard.c @@ -14,7 +14,9 @@ */ #include <device/device.h> +#include <boot/coreboot_tables.h> #include <bootblock_common.h> +#include <security/vboot/vboot_common.h> #include <vendorcode/google/chromeos/chromeos.h> #include <soc/usb.h> @@ -50,3 +52,22 @@ .name = CONFIG_MAINBOARD_PART_NUMBER, .enable_dev = mainboard_enable, }; + +void lb_board(struct lb_header *header) +{ + struct lb_modeflags { + uint32_t tag; + uint32_t size; + uint32_t reserved; + uint32_t out_flags; + } *entry; + + entry = (struct lb_modeflags *)lb_new_record(header); + entry->tag = LB_TAG_VBOOT_HANDOFF; + entry->size = sizeof(*entry); + entry->reserved = 0; + entry->out_flags = 0; + if (vboot_developer_mode_enabled()) { + entry->out_flags |= VB_INIT_OUT_ENABLE_DEVELOPER; + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/34674 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I411eb8ee6783402db6d4443a6ea1026cf7ad3ae3 Gerrit-Change-Number: 34674 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

4 14

Change in ...coreboot[master]: TEMP: NOT FOR REVIEW qcs405: Enable bl31
by Name of user not set (Code Review) 11 Mar '20

11 Mar '20

nsekar(a)codeaurora.org has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31899 Change subject: TEMP: NOT FOR REVIEW qcs405: Enable bl31 ...................................................................... TEMP: NOT FOR REVIEW qcs405: Enable bl31 Keeping it seperate to include bl31.elf till we can build bl31 from repo Change-Id: Icca865369358e54a042b2dce02072c05761194b2 Signed-off-by: Nitheesh Sekar <nsekar(a)codeaurora.org> Signed-off-by: Sricharan R <sricharan(a)codeaurora.org> --- M src/arch/arm64/Makefile.inc M src/soc/qualcomm/qcs405/Makefile.inc M src/soc/qualcomm/qcs405/soc.c 3 files changed, 16 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/99/31899/1 diff --git a/src/arch/arm64/Makefile.inc b/src/arch/arm64/Makefile.inc index 6bb7196..bf2f01b 100644 --- a/src/arch/arm64/Makefile.inc +++ b/src/arch/arm64/Makefile.inc @@ -157,6 +157,8 @@ ifeq ($(CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE),y) +ifneq ($(CONFIG_SOC_QUALCOMM_QCS405),y) + ifeq ($(CONFIG_ARM64_BL31_EXTERNAL_FILE),"") BL31_SOURCE := $(top)/3rdparty/arm-trusted-firmware @@ -235,6 +237,8 @@ endif # CONFIG_ARM64_USE_SECURE_OS +endif # CONFIG_SOC_QUALCOMM_QCS405 + endif # CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE endif # CONFIG_ARCH_RAMSTAGE_ARM64 diff --git a/src/soc/qualcomm/qcs405/Makefile.inc b/src/soc/qualcomm/qcs405/Makefile.inc index 8c57f4a..b6ad8c2 100644 --- a/src/soc/qualcomm/qcs405/Makefile.inc +++ b/src/soc/qualcomm/qcs405/Makefile.inc @@ -107,4 +107,15 @@ @printf "Generating: $(subst $(obj)/,,$(@))\n" cp $(objcbfs)/bootblock.raw.bin $(objcbfs)/bootblock.bin endif +################################################################################ +BL31_FILE := $(QCS405_BLOB)/bl31.elf +bl31_file := $(shell ls $(BL31_FILE)) +ifneq (,$(findstring $(BL31_FILE),$(bl31_file))) + BL31_CBFS := $(CONFIG_CBFS_PREFIX)/bl31 + $(BL31_CBFS)-file := $(BL31_FILE) + $(BL31_CBFS)-type := payload + $(BL31_CBFS)-compression := none + cbfs-files-y += $(BL31_CBFS) +endif +################################################################################ endif diff --git a/src/soc/qualcomm/qcs405/soc.c b/src/soc/qualcomm/qcs405/soc.c index ea52eb8..e22a3d8 100644 --- a/src/soc/qualcomm/qcs405/soc.c +++ b/src/soc/qualcomm/qcs405/soc.c @@ -23,7 +23,7 @@ void bootmem_platform_add_ranges(void) { - bootmem_add_range((uintptr_t)_dram_reserved, _dram_reserved_size, BM_MEM_BL31); + bootmem_add_range((uintptr_t)_dram_reserved, REGION_SIZE(dram_reserved), BM_MEM_BL31); } static void soc_read_resources(struct device *dev) -- To view, visit https://review.coreboot.org/c/coreboot/+/31899 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Icca865369358e54a042b2dce02072c05761194b2 Gerrit-Change-Number: 31899 Gerrit-PatchSet: 1 Gerrit-Owner: nsekar(a)codeaurora.org Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: nsekar(a)codeaurora.org Gerrit-MessageType: newchange

4 17

Change in ...coreboot[master]: TEMP: NOT FOR REVIEW: Mistral: Add board id detection using TPM
by Name of user not set (Code Review) 11 Mar '20

11 Mar '20

nsekar(a)codeaurora.org has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31898 Change subject: TEMP: NOT FOR REVIEW: Mistral: Add board id detection using TPM ...................................................................... TEMP: NOT FOR REVIEW: Mistral: Add board id detection using TPM This patch adds support to select the board id based on the TPM availability. Change-Id: Ifa7b17085364bb631f43a133839773033721062d Signed-off-by: Nitheesh Sekar <nsekar(a)codeaurora.org> --- M src/drivers/spi/tpm/tis.c M src/drivers/spi/tpm/tpm.c M src/mainboard/google/mistral/boardid.c M src/security/tpm/tis.h M src/soc/qualcomm/qcs405/include/soc/memlayout.ld M src/soc/qualcomm/qcs405/include/soc/symbols.h 6 files changed, 49 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/31898/1 diff --git a/src/drivers/spi/tpm/tis.c b/src/drivers/spi/tpm/tis.c index 40bf27d..9d0f664 100644 --- a/src/drivers/spi/tpm/tis.c +++ b/src/drivers/spi/tpm/tis.c @@ -4,6 +4,8 @@ * found in the LICENSE file. */ +#include <symbols.h> +#include <soc/symbols.h> #include <arch/early_variables.h> #include <console/console.h> #include <string.h> @@ -93,3 +95,13 @@ return 0; } + +unsigned int is_tpm_detected(void) +{ + if (0 == (*_tpm_detection)) + return 0; + else if (1 == (*_tpm_detection)) + return 1; + else + return 0; +} diff --git a/src/drivers/spi/tpm/tpm.c b/src/drivers/spi/tpm/tpm.c index aad7610..b2484aa0 100644 --- a/src/drivers/spi/tpm/tpm.c +++ b/src/drivers/spi/tpm/tpm.c @@ -15,6 +15,8 @@ * Specification Revision 00.43". */ +#include <symbols.h> +#include <soc/symbols.h> #include <arch/early_variables.h> #include <assert.h> #include <commonlib/endian.h> @@ -457,10 +459,13 @@ } if (!retries) { + *_tpm_detection = 0; printk(BIOS_ERR, "\n%s: Failed to connect to the TPM\n", __func__); return -1; } + else + *_tpm_detection = 1; printk(BIOS_INFO, " done!\n"); diff --git a/src/mainboard/google/mistral/boardid.c b/src/mainboard/google/mistral/boardid.c index b86f84e..66309c0 100644 --- a/src/mainboard/google/mistral/boardid.c +++ b/src/mainboard/google/mistral/boardid.c @@ -17,6 +17,7 @@ #include <gpio.h> #include <console/console.h> #include <stdlib.h> +#include <security/tpm/tis.h> /* * Mistral boards dedicate to the board ID three GPIOs in ternary mode: 105, 106 @@ -32,8 +33,22 @@ [1] = GPIO(106), [0] = GPIO(105)}; - bid = gpio_binary_first_base3_value(pins, ARRAY_SIZE(pins)); - printk(BIOS_INFO, "Board ID %d\n", bid); + if (0 == is_tpm_detected()) { + bid = 25; /* Assign 25 for EVB boards */ + printk(BIOS_DEBUG, "EVB Board ID: %d\n", bid); + } else { + bid = 0; /* Assign 0 for Proto boards */ + + /* The board id assigned for Proto boards is 0. + * Since gpios are not wired in the initial phase, + * we will get 0 whihch is a coincidence. + * To make sure it starts working, after gpios are + * wired, reassign the value read from gpios to id. + */ + bid = gpio_binary_first_base3_value(pins, ARRAY_SIZE(pins)); + + printk(BIOS_DEBUG, "Proto Board ID: %d\n", bid); + } return bid; } diff --git a/src/security/tpm/tis.h b/src/security/tpm/tis.h index c410838..dd2f348 100644 --- a/src/security/tpm/tis.h +++ b/src/security/tpm/tis.h @@ -97,4 +97,14 @@ */ int tis_plat_irq_status(void); +/* + * This function is_tpm_detected() sets tpm_detection value to be 1 upon TPM detection. + * The value is writted to the specific region of SRAM which will retain + * the TPM Detection information between various stages of the bootloader. + * + * Returns 0 if TPM is not detected + * Returns 1 if TPM is detected + */ +unsigned int is_tpm_detected(void); + #endif /* TIS_H_ */ diff --git a/src/soc/qualcomm/qcs405/include/soc/memlayout.ld b/src/soc/qualcomm/qcs405/include/soc/memlayout.ld index c23f651..585abf5 100644 --- a/src/soc/qualcomm/qcs405/include/soc/memlayout.ld +++ b/src/soc/qualcomm/qcs405/include/soc/memlayout.ld @@ -39,6 +39,7 @@ TIMESTAMP(0x8C50000, 1K) PRERAM_CBMEM_CONSOLE(0x8C50400, 32K) PRERAM_CBFS_CACHE(0x8C58400, 70K) + REGION(tpm_detection, 0x8CFD000, 0x8, 0x10) BSRAM_END(0x8D80000) DRAM_START(0x80000000) diff --git a/src/soc/qualcomm/qcs405/include/soc/symbols.h b/src/soc/qualcomm/qcs405/include/soc/symbols.h index 45e6988..ce6e7cb 100644 --- a/src/soc/qualcomm/qcs405/include/soc/symbols.h +++ b/src/soc/qualcomm/qcs405/include/soc/symbols.h @@ -23,4 +23,8 @@ DECLARE_REGION(bsram); DECLARE_REGION(dram_reserved); +extern u8 _tpm_detection[]; +extern u8 _etpm_detection[]; +#define _tpm_detection_size (_etpm_detection - _tpm_detection) + #endif // _SOC_QUALCOMM_QCS405_SYMBOLS_H_ -- To view, visit https://review.coreboot.org/c/coreboot/+/31898 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ifa7b17085364bb631f43a133839773033721062d Gerrit-Change-Number: 31898 Gerrit-PatchSet: 1 Gerrit-Owner: nsekar(a)codeaurora.org Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Philipp Deppenwiese <zaolin.daisuki(a)gmail.com> Gerrit-Reviewer: nsekar(a)codeaurora.org Gerrit-MessageType: newchange

6 16

Change in ...coreboot[master]: google/mistral: Support triggering Recovery/FDR.
by SANTHOSH JANARDHANA HASSAN (Code Review) 11 Mar '20

11 Mar '20

SANTHOSH JANARDHANA HASSAN has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31173 Change subject: google/mistral: Support triggering Recovery/FDR. ...................................................................... google/mistral: Support triggering Recovery/FDR. Implement triggering factory data reset and recovery mechanism based on Recovery/FDR switch(GPIO77) value. Change-Id: Ifdbd696ee3fd9f073cc44a49ad341cad7e33845e Signed-off-by: Santhosh Hassan <sahassan(a)google.com> --- M src/mainboard/google/mistral/Kconfig A src/mainboard/google/mistral/board.h M src/mainboard/google/mistral/chromeos.c M src/mainboard/google/mistral/verstage.c 4 files changed, 142 insertions(+), 13 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/31173/1 diff --git a/src/mainboard/google/mistral/Kconfig b/src/mainboard/google/mistral/Kconfig index 5e97bb6..f28a382 100644 --- a/src/mainboard/google/mistral/Kconfig +++ b/src/mainboard/google/mistral/Kconfig @@ -23,6 +23,7 @@ select GBB_FLAG_DEV_SCREEN_SHORT_DELAY select GBB_FLAG_FORCE_DEV_SWITCH_ON select GBB_FLAG_FORCE_MANUAL_RECOVERY + select VBOOT_WIPEOUT_SUPPORTED config MAINBOARD_DIR string diff --git a/src/mainboard/google/mistral/board.h b/src/mainboard/google/mistral/board.h new file mode 100644 index 0000000..2e23ce3 --- /dev/null +++ b/src/mainboard/google/mistral/board.h @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __COREBOOT_SRC_MAINBOARD_GOOGLE_MISTRAL_BOARD_H +#define __COREBOOT_SRC_MAINBOARD_GOOGLE_MISTRAL_BOARD_H + +#include <gpio.h> +#include <soc/gpio.h> + + +#define GPIO_H1_AP_INT GPIO(53) +#define GPIO_WP_STATE GPIO(54) +#define GPIO_REC_STATE GPIO(77) + +void setup_chromeos_gpios(void); + +#endif /* ! __COREBOOT_SRC_MAINBOARD_GOOGLE_MISTRAL_BOARD_H */ diff --git a/src/mainboard/google/mistral/chromeos.c b/src/mainboard/google/mistral/chromeos.c index ba0b1da..0405c4e 100644 --- a/src/mainboard/google/mistral/chromeos.c +++ b/src/mainboard/google/mistral/chromeos.c @@ -14,11 +14,18 @@ */ #include <boot/coreboot_tables.h> -#include <gpio.h> #include <security/tpm/tis.h> -#include <soc/gpio.h> +#include <bootmode.h> +#include <timer.h> +#include <console/console.h> +#include "board.h" -#define GPIO_H1_AP_INT GPIO(53) +void setup_chromeos_gpios(void) +{ + gpio_input_pullup(GPIO_H1_AP_INT); + gpio_input(GPIO_WP_STATE); + gpio_input(GPIO_REC_STATE); +} void fill_lb_gpios(struct lb_gpios *gpios) { @@ -27,9 +34,109 @@ {GPIO_H1_AP_INT.addr, ACTIVE_LOW, gpio_get(GPIO_H1_AP_INT), "TPM interrupt"}, }; +#endif + struct lb_gpio chromeos_gpios[] = { + {GPIO_REC_STATE.addr, ACTIVE_LOW, + gpio_get(GPIO_REC_STATE), "recovery"}, + {GPIO_WP_STATE.addr, ACTIVE_LOW, + gpio_get(GPIO_WP_STATE), "write protect"}, + {-1, ACTIVE_LOW, 1, "power"}, + {-1, ACTIVE_LOW, 0, "lid"}, + }; lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios)); -#endif +} + +#define WIPEOUT_MODE_DELAY_MS (8 * 1000) +#define RECOVERY_MODE_EXTRA_DELAY_MS (8 * 1000) + +/* + * The recovery switch: it needs to be pressed for a + * certain duration at startup to signal different requests: + * + * - keeping it pressed for 8 to 16 seconds after startup signals the need for + * factory reset (wipeout); + * - keeping it pressed for longer than 16 seconds signals the need for Chrome + * OS recovery. + * + * The state is read once and cached for following inquiries. The below enum + * lists possible states. + */ +enum switch_state { + not_probed = -1, + no_req, + recovery_req, + wipeout_req +}; + +static enum switch_state get_rec_sw_state(void) +{ + struct stopwatch sw; + int sampled_value; + gpio_t rec_sw; + static enum switch_state saved_state = not_probed; + + if (saved_state != not_probed) + return saved_state; + + rec_sw = GPIO_REC_STATE; + sampled_value = !gpio_get(rec_sw); + + if (!sampled_value) { + saved_state = no_req; + //display_pattern(WWR_NORMAL_BOOT); + return saved_state; + } + + //display_pattern(WWR_RECOVERY_PUSHED); + printk(BIOS_INFO, "recovery button pressed\n"); + + stopwatch_init_msecs_expire(&sw, WIPEOUT_MODE_DELAY_MS); + + do { + sampled_value = !gpio_get(rec_sw); + if (!sampled_value) + break; + } while (!stopwatch_expired(&sw)); + + if (sampled_value) { + //display_pattern(WWR_WIPEOUT_REQUEST); + printk(BIOS_INFO, "wipeout requested, checking recovery\n"); + stopwatch_init_msecs_expire(&sw, RECOVERY_MODE_EXTRA_DELAY_MS); + do { + sampled_value = !gpio_get(rec_sw); + if (!sampled_value) + break; + } while (!stopwatch_expired(&sw)); + + if (sampled_value) { + saved_state = recovery_req; + //display_pattern(WWR_RECOVERY_REQUEST); + printk(BIOS_INFO, "recovery requested\n"); + } else { + saved_state = wipeout_req; + } + } else { + saved_state = no_req; + //display_pattern(WWR_NORMAL_BOOT); + } + + return saved_state; +} + +int get_recovery_mode_switch(void) +{ + return get_rec_sw_state() == recovery_req; +} + +int get_wipeout_mode_switch(void) +{ + return get_rec_sw_state() == wipeout_req; +} + +int get_write_protect_state(void) +{ + return !gpio_get(GPIO_WP_STATE); } #if 0 diff --git a/src/mainboard/google/mistral/verstage.c b/src/mainboard/google/mistral/verstage.c index 7ea21c7..a63f61e 100644 --- a/src/mainboard/google/mistral/verstage.c +++ b/src/mainboard/google/mistral/verstage.c @@ -15,18 +15,10 @@ */ #include <console/console.h> -#include <gpio.h> #include <security/vboot/vboot_common.h> #include <spi-generic.h> #include <soc/clock.h> -#include <soc/gpio.h> - -#define GPIO_H1_AP_INT GPIO(53) - -static void setup_chromeos_gpios(void) -{ - gpio_input_pullup(GPIO_H1_AP_INT); -} +#include "board.h" void verstage_mainboard_init(void) { -- To view, visit https://review.coreboot.org/c/coreboot/+/31173 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ifdbd696ee3fd9f073cc44a49ad341cad7e33845e Gerrit-Change-Number: 31173 Gerrit-PatchSet: 1 Gerrit-Owner: SANTHOSH JANARDHANA HASSAN <sahassan(a)google.com> Gerrit-MessageType: newchange

5 12

Change in ...coreboot[master]: google/mistral: add CR50
by Patrick Georgi (Code Review) 11 Mar '20

11 Mar '20

Patrick Georgi has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30716 Change subject: google/mistral: add CR50 ...................................................................... google/mistral: add CR50 Change-Id: Ia8184e48a43866b7d065952c13e7176bb3b52e4d Signed-off-by: Patrick Georgi <pgeorgi(a)google.com> --- M src/mainboard/google/mistral/Kconfig 1 file changed, 6 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/16/30716/1 diff --git a/src/mainboard/google/mistral/Kconfig b/src/mainboard/google/mistral/Kconfig index b614a37..eddc1a3 100644 --- a/src/mainboard/google/mistral/Kconfig +++ b/src/mainboard/google/mistral/Kconfig @@ -14,6 +14,8 @@ select SPI_FLASH_WINBOND select MAINBOARD_HAS_CHROMEOS select MISSING_BOARD_RESET + select MAINBOARD_HAS_TPM2 + select MAINBOARD_HAS_SPI_TPM_CR50 config VBOOT select VBOOT_VBNV_FLASH @@ -29,6 +31,10 @@ string default "Google" +config DRIVER_TPM_SPI_BUS + hex + default 0x4 + ########################################################## #### Update below when adding a new derivative board. #### ########################################################## -- To view, visit https://review.coreboot.org/c/coreboot/+/30716 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia8184e48a43866b7d065952c13e7176bb3b52e4d Gerrit-Change-Number: 30716 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 5

Change in ...coreboot[master]: google/mistral: Enable additional GBB flags in vboot.
by SANTHOSH JANARDHANA HASSAN (Code Review) 11 Mar '20

11 Mar '20

SANTHOSH JANARDHANA HASSAN has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31171 Change subject: google/mistral: Enable additional GBB flags in vboot. ...................................................................... google/mistral: Enable additional GBB flags in vboot. Enable GBB_FLAG_FORCE_MANUAL_RECOVERY and GBB_FLAG_DEV_SCREEN_SHORT_DELAY as additional default flags. Change-Id: If1e7effb2d74b861f196ce861a3c8779ce89b3b2 Signed-off-by: Santhosh Hassan <sahassan(a)google.com> Change-Id: Ic0a00c6a7bfa5090461c2c9da0bc6ee73118ca74 --- M src/mainboard/google/mistral/Kconfig 1 file changed, 2 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/71/31171/1 diff --git a/src/mainboard/google/mistral/Kconfig b/src/mainboard/google/mistral/Kconfig index c369472..5e97bb6 100644 --- a/src/mainboard/google/mistral/Kconfig +++ b/src/mainboard/google/mistral/Kconfig @@ -20,7 +20,9 @@ config VBOOT select VBOOT_VBNV_FLASH select VBOOT_NO_BOARD_SUPPORT + select GBB_FLAG_DEV_SCREEN_SHORT_DELAY select GBB_FLAG_FORCE_DEV_SWITCH_ON + select GBB_FLAG_FORCE_MANUAL_RECOVERY config MAINBOARD_DIR string -- To view, visit https://review.coreboot.org/c/coreboot/+/31171 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic0a00c6a7bfa5090461c2c9da0bc6ee73118ca74 Gerrit-Change-Number: 31171 Gerrit-PatchSet: 1 Gerrit-Owner: SANTHOSH JANARDHANA HASSAN <sahassan(a)google.com> Gerrit-MessageType: newchange

3 9

Change in ...coreboot[master]: qclib: Differentiate between ES_1.0 and ES1.1 silicon
by Name of user not set (Code Review) 11 Mar '20

11 Mar '20

nsekar(a)codeaurora.org has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30903 Change subject: qclib: Differentiate between ES_1.0 and ES1.1 silicon ...................................................................... qclib: Differentiate between ES_1.0 and ES1.1 silicon The PBL data ptr gets passed at a different location for 1.0 vs 1.1. So let us read the revision from TCSR and pass the right value. Change-Id: Id23493c8cfc64f62964a453cd32a0ddc4bff9e84 Signed-off-by: Sricharan R <sricharan(a)codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar(a)codeaurora.org> --- M src/soc/qualcomm/qcs405/qclib_execute.c 1 file changed, 14 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/03/30903/1 diff --git a/src/soc/qualcomm/qcs405/qclib_execute.c b/src/soc/qualcomm/qcs405/qclib_execute.c index 917a04c..214128f 100644 --- a/src/soc/qualcomm/qcs405/qclib_execute.c +++ b/src/soc/qualcomm/qcs405/qclib_execute.c @@ -14,6 +14,7 @@ */ #include <string.h> +#include <arch/io.h> #include <arch/cache.h> #include <arch/mmu.h> #include <cbfs.h> @@ -28,7 +29,12 @@ #define DCB_NAME "/dcb" #define QCLIB_NAME "/qclib" -#define PBL_DATA_PTR 0x8c101a0 //0x14810188 +#define TCSR_SOC_HW_VERSION 0x0194D000 +#define ES_1_0 0x20140100 +#define ES_1_1 0x20140101 + +#define PBL_DATA_PTR_ES_1_0 0x8c101a0 +#define PBL_DATA_PTR_ES_1_1 0x8c111a0 void qclib_load_and_run(void) { @@ -36,6 +42,7 @@ void *arg; int ret_code; struct mmu_context pre_qclib_mmu_context; + void *pbl_data_ptr; struct prog qclib = PROG_INIT(PROG_REFCODE, CONFIG_CBFS_PREFIX QCLIB_NAME); @@ -67,7 +74,12 @@ if (cbfs_prog_stage_load(&qclib)) goto fail; - prog_set_entry(&qclib, qclib.entry, (void *)PBL_DATA_PTR); + if (read32((void *) TCSR_SOC_HW_VERSION) == ES_1_1) + pbl_data_ptr = (void *) 0x8c111a0; + else + pbl_data_ptr = (void *) 0x8c101a0; + + prog_set_entry(&qclib, qclib.entry, (void *)pbl_data_ptr); printk(BIOS_DEBUG, "\n\n\nQCLib is about to Initialize PMIC and DDR\n"); printk(BIOS_DEBUG, "Jumping to QCLib code at %p(%p)\n", -- To view, visit https://review.coreboot.org/c/coreboot/+/30903 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id23493c8cfc64f62964a453cd32a0ddc4bff9e84 Gerrit-Change-Number: 30903 Gerrit-PatchSet: 1 Gerrit-Owner: nsekar(a)codeaurora.org Gerrit-MessageType: newchange

4 9

Change in ...coreboot[master]: qcs405: Update memory layout
by Name of user not set (Code Review) 11 Mar '20

11 Mar '20

nsekar(a)codeaurora.org has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32108 Change subject: qcs405: Update memory layout ...................................................................... qcs405: Update memory layout Update the memory layout so that we get to use the unused space. This enables us to use default kernel size of 512 MB configuration in depthcharge. Change-Id: I419bfefadb610c3fdf2b8ed56965801be0dc4e90 Signed-off-by: Nitheesh Sekar <nsekar(a)codeaurora.org> --- M src/soc/qualcomm/qcs405/include/soc/memlayout.ld 1 file changed, 2 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/08/32108/1 diff --git a/src/soc/qualcomm/qcs405/include/soc/memlayout.ld b/src/soc/qualcomm/qcs405/include/soc/memlayout.ld index 68642d6..6856919 100644 --- a/src/soc/qualcomm/qcs405/include/soc/memlayout.ld +++ b/src/soc/qualcomm/qcs405/include/soc/memlayout.ld @@ -45,6 +45,6 @@ DRAM_START(0x80000000) /* DDR Carveout for BL31 usage */ REGION(dram_reserved, 0x85000000, 0x5100000, 4096) - POSTRAM_CBFS_CACHE(0x9F800000, 384K) - RAMSTAGE(0x9F860000, 128K) + POSTRAM_CBFS_CACHE(0x8A100000, 384K) + RAMSTAGE(0x8A160000, 128K) } -- To view, visit https://review.coreboot.org/c/coreboot/+/32108 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I419bfefadb610c3fdf2b8ed56965801be0dc4e90 Gerrit-Change-Number: 32108 Gerrit-PatchSet: 1 Gerrit-Owner: nsekar(a)codeaurora.org Gerrit-MessageType: newchange

3 2

Change in ...coreboot[master]: google/mistral: move bootblock and fmap to their previous location
by Patrick Georgi (Code Review) 11 Mar '20

11 Mar '20

Patrick Georgi has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30965 Change subject: google/mistral: move bootblock and fmap to their previous location ...................................................................... google/mistral: move bootblock and fmap to their previous location Helps with the current boot hack that requires them to be at certain locations. Also make GBB smaller. We don't store graphics in there anymore. Change-Id: I09c3a6d4221990cd51d4793693a7c7ae2df85105 Signed-off-by: Patrick Georgi <pgeorgi(a)google.com> --- M src/mainboard/google/mistral/chromeos.fmd 1 file changed, 3 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/65/30965/1 diff --git a/src/mainboard/google/mistral/chromeos.fmd b/src/mainboard/google/mistral/chromeos.fmd index a9bdd7b..ffeec16 100644 --- a/src/mainboard/google/mistral/chromeos.fmd +++ b/src/mainboard/google/mistral/chromeos.fmd @@ -2,9 +2,9 @@ WP_RO@0x0 0x400000 { RO_SECTION@0x0 0x3e0000 { BOOTBLOCK@0 128K - COREBOOT(CBFS)@0x20000 0x2e0000 - FMAP@0x300000 0x1000 - GBB@0x301000 0xdef00 + COREBOOT(CBFS)@0x3e000 0x1e0000 + FMAP@0x21e000 0x1000 + GBB@0x3dd000 0x2f00 RO_FRID@0x3dff00 0x100 } RO_VPD@0x3e0000 0x20000 -- To view, visit https://review.coreboot.org/c/coreboot/+/30965 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I09c3a6d4221990cd51d4793693a7c7ae2df85105 Gerrit-Change-Number: 30965 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

1 1

Change in ...coreboot[master]: soc/intel/common: Add more GPIO definition macros
by Thomas Heijligen (Code Review) 10 Mar '20

10 Mar '20

Hello Nico Huber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/31350 to review the following change. Change subject: soc/intel/common: Add more GPIO definition macros ...................................................................... soc/intel/common: Add more GPIO definition macros Change-Id: Id1a3c00aa8a857afa08e745b0b6a578b01fa6d47 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M src/soc/intel/common/block/include/intelblocks/gpio_defs.h 1 file changed, 10 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/50/31350/1 diff --git a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h index 35f89c9..4d9f2be 100644 --- a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h +++ b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h @@ -236,6 +236,16 @@ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE)) +#define PAD_CFG_GPI_IOSSTATE(pad, pull, rst, iosstate) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ + PAD_PULL(pull) | PAD_IOSSTATE(iosstate)) + +#define PAD_CFG_GPI_IOSSTATE_IOSTERM(pad, pull, rst, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ + PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) + /* General purpose input. The following macro sets the * Host Software Pad Ownership to GPIO Driver mode. */ -- To view, visit https://review.coreboot.org/c/coreboot/+/31350 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id1a3c00aa8a857afa08e745b0b6a578b01fa6d47 Gerrit-Change-Number: 31350 Gerrit-PatchSet: 1 Gerrit-Owner: Thomas Heijligen <src(a)posteo.de> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Thomas Heijligen <src(a)posteo.de> Gerrit-MessageType: newchange

3 3

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit August 2019