junaid has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30798
Change subject: for review d945gclf/Kconig and devicetree.cb . these files are modified according to the superIO chip Winbond w83627DHG
......................................................................
for review d945gclf/Kconig and devicetree.cb . these files are modified according to the superIO chip Winbond w83627DHG
Change-Id: I1449d9351bd1b76ecad16e6d81c501c1d4dd80f5
Signed-off-by: junaid <junaidimpex(a)gmail.com>
---
M src/mainboard/intel/d945gclf/Kconfig
M src/mainboard/intel/d945gclf/devicetree.cb
2 files changed, 37 insertions(+), 38 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/30798/1
diff --git a/src/mainboard/intel/d945gclf/Kconfig b/src/mainboard/intel/d945gclf/Kconfig
index 70fa848..906dd01 100644
--- a/src/mainboard/intel/d945gclf/Kconfig
+++ b/src/mainboard/intel/d945gclf/Kconfig
@@ -20,7 +20,8 @@
select NORTHBRIDGE_INTEL_I945
select NORTHBRIDGE_INTEL_SUBTYPE_I945GC
select SOUTHBRIDGE_INTEL_I82801GX
- select SUPERIO_SMSC_LPC47M15X
+## changed as per Advantech SOM 4461
+ select SUPERIO_WINBOND_W83627DHG
select HAVE_OPTION_TABLE
select HAVE_CMOS_DEFAULT
select HAVE_PIRQ_TABLE
diff --git a/src/mainboard/intel/d945gclf/devicetree.cb b/src/mainboard/intel/d945gclf/devicetree.cb
index 90c517f..864775a 100644
--- a/src/mainboard/intel/d945gclf/devicetree.cb
+++ b/src/mainboard/intel/d945gclf/devicetree.cb
@@ -65,44 +65,42 @@
device pci 1d.1 on end # USB UHCI
device pci 1d.2 on end # USB UHCI
device pci 1d.3 off end # USB UHCI
- device pci 1d.7 on end # USB2 EHCI
- device pci 1e.0 on end # PCI bridge
- device pci 1e.2 off end # AC'97 Audio
+ device pci 1d.7 on end # USB2 EHCI
+ device pci 1e.0 on end # PCI bridge
+ device pci 1e.2 off end # AC'97 Audio
device pci 1e.3 off end # AC'97 Modem
device pci 1f.0 on # LPC bridge
- chip superio/smsc/lpc47m15x
- device pnp 2e.0 off # Floppy
- end
- device pnp 2e.3 off # Parport
- end
- device pnp 2e.4 on
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 on
- io 0x60 = 0x2f8
- irq 0x70 = 3
- irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
- end
- device pnp 2e.7 on # Keyboard+Mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- irq 0xf0 = 0x82 # HW accel A20.
- end
- device pnp 2e.8 on # GAME
- # all default
- end
- device pnp 2e.a on # PME
- end
- device pnp 2e.b on # MPU
- end
- end
- end
+ chip superio/winbond/w83627dhg
+ device pnp 2e.0 off end # Floppy
+ device pnp 2e.1 off end # Parallel Port
+ device pnp 2e.2 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard,Mouse
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ #device pnp 2e.6 off end # SPI
+ device pnp 2e.307 off end # GPIO6
+ device pnp 2e.8 off end # WDTO, PLED
+ device pnp 2e.009 off end # GPIO2
+ device pnp 2e.109 off end # GPIO3
+ device pnp 2e.209 off end # GPIO4
+ device pnp 2e.309 off end # GPIO5
+ device pnp 2e.A off end # ACPI
+ device pnp 2e.B off end # HW Monitor
+ end # w83627dhg
+ end
device pci 1f.1 off end # IDE
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMBus
- end
- end
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMBus
+ end
+ end
end
--
To view, visit https://review.coreboot.org/c/coreboot/+/30798
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: I1449d9351bd1b76ecad16e6d81c501c1d4dd80f5
Gerrit-Change-Number: 30798
Gerrit-PatchSet: 1
Gerrit-Owner: junaid <junaidimpex(a)gmail.com>
Gerrit-MessageType: newchange
Rizwan Qureshi has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32078
Change subject: mb/google/hatch:[DEBUG ONLY] Assert DEVSLP in S3
......................................................................
mb/google/hatch:[DEBUG ONLY] Assert DEVSLP in S3
It was obsevred that the DEVSLP is keeping low in S3, and SDD is drawing
some power, assert DEVSLP in S3 to indicate SSD to go into low power mode.
Change-Id: I001781fd0e1e5763f6865966658fc9fccc3edff8
Signed-off-by: Rizwan Qureshi <rizwan.qureshi(a)intel.com>
---
M src/mainboard/google/hatch/variants/baseboard/gpio.c
1 file changed, 1 insertion(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/78/32078/1
diff --git a/src/mainboard/google/hatch/variants/baseboard/gpio.c b/src/mainboard/google/hatch/variants/baseboard/gpio.c
index 5987abc..15038b5 100644
--- a/src/mainboard/google/hatch/variants/baseboard/gpio.c
+++ b/src/mainboard/google/hatch/variants/baseboard/gpio.c
@@ -410,6 +410,7 @@
/* Default GPIO settings before entering sleep. */
static const struct pad_config default_sleep_gpio_table[] = {
+ PAD_CFG_GPO(GPP_E5, 1, DEEP),
};
/*
--
To view, visit https://review.coreboot.org/c/coreboot/+/32078
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: I001781fd0e1e5763f6865966658fc9fccc3edff8
Gerrit-Change-Number: 32078
Gerrit-PatchSet: 1
Gerrit-Owner: Rizwan Qureshi <rizwan.qureshi(a)intel.com>
Gerrit-MessageType: newchange
Calvin has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31849
Change subject: Updated and converted to markdown doc from wiki on porting motherboards.
......................................................................
Updated and converted to markdown doc from wiki on porting motherboards.
Some of the documentation from the wiki (https://www.coreboot.org/Motherboard_Porting_Guide) has been ported to markdown and updated as I was able to figure things out. Still a work in progress as there is more data from that page that I will need to convert as I work through it. If I get anywhere in my project of porting coreboot to an older Chromebook, I will document more of this process as I go.
Signed-off-by: calvinrempel <calvin.rempel(a)gmail.com>
Change-Id: Ie3b8a99c10808c7e7ebc826b4d2f992774cc9a75
---
M Documentation/index.md
A Documentation/porting/index.md
A Documentation/porting/motherboard_probe.md
3 files changed, 135 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/31849/1
diff --git a/Documentation/index.md b/Documentation/index.md
index dd8714c..32635f9 100644
--- a/Documentation/index.md
+++ b/Documentation/index.md
@@ -164,6 +164,7 @@
* [Rookie Guide](lessons/index.md)
* [Coding Style](coding_style.md)
* [Project Ideas](contributing/project_ideas.md)
+* [Porting](porting/index.md)
* [Code of Conduct](community/code_of_conduct.md)
* [Community forums](community/forums.md)
* [coreboot at conferences](community/conferences.md)
diff --git a/Documentation/porting/index.md b/Documentation/porting/index.md
new file mode 100644
index 0000000..ed282e8
--- /dev/null
+++ b/Documentation/porting/index.md
@@ -0,0 +1,3 @@
+# Porting New Boards
+
+* [Motherboard Probing](motherboard_probe.md)
diff --git a/Documentation/porting/motherboard_probe.md b/Documentation/porting/motherboard_probe.md
new file mode 100644
index 0000000..7562f7c
--- /dev/null
+++ b/Documentation/porting/motherboard_probe.md
@@ -0,0 +1,131 @@
+Motherboard Porting Guide
+=========================
+
+Please note that this guide is very much a work in progress.
+
+Finding out What You Have
+-------------------------
+
+### Tools
+To begin the process of porting a motherboard to coreboot, you first
+need to determine what all is on it: the chipset (ie, North and South
+Bridge), Flash Rom, etc. To do this, you will need a suite of
+tools provided by the coreboot project, as well as some that can be
+found more readily in various repositories.
+
+For the sake of this page, it will be assumed you are using Debian or
+Ubuntu.
+
+#### Build Environment
+If you have not already done so, get your basic build environment
+installed:
+
+ $ sudo apt install build-essential git cvs subversion
+
+#### Probing Utilities - From Repos
+Next, a number of utilities will need to be installed which will be used
+later for probing the system as well as some dev libraries which will be
+used in building some of the tools in the next step.These should be
+available in your distro's repo:
+
+ $ sudo apt install pciutils pciutils-dev flashrom acpitool \
+ usbutils acpidump
+
+#### Probing Utilities - From Source
+Once the base build system in place and what utilities along with what
+libraries you can glean from your distro's repositories, it is time to
+build some tools from source. If you have not already done so, checkout
+the git repo as described in "[Rookie Guide: Lesson 1]".
+
+Once you have synced the coreboot repo, cd into the utilities folder:
+
+ $cd coreboot/util
+
+##### superiotool
+
+ $ cd ./superiotool
+ $ make
+ $ sudo make install
+ $ cd ..
+
+##### inteltool
+
+ $ cd ./inteltool
+ $ make
+ $ sudo make install
+ $ cd ..
+
+##### ectool
+
+ $ cd ./ectool
+ $ make
+ $ make install
+ $ cd ..
+
+##### dmidecode
+
+ $ cvs -z3 -d:pserver:anonymous@cvs.savannah.nongnu.org:/sources/dmidecode \
+ co dmidecode
+ $ cd dmidecode
+ $ make
+ $ sudo make install
+ $ cd ..
+
+##### msrtool
+
+ $ cd ./msrtool
+ $ ./configure
+ $ make
+ $ sudo make install
+ $ cd ..
+
+##### nvramtool
+
+ $ cd ./nvramtool
+ $ make
+ $ sudo make install
+
+##### acpica-unix
+
+ $ wget http://deb.debian.org/debian/pool/main/a/acpica-unix/acpica-unix_20181213.o…
+ $ tar -xaf acpica-unix_20181213.orig.tar.gz
+ $ cd ./acpica-unix-2018-12-13/
+ $ make
+ $ sudo make install
+
+### Probe the Board
+Now we will begin to probe the board to see what we can find out about
+it. First, become root:
+
+ $ sudo su
+
+Then load the msr module into the kernel:
+
+ $ sudo modprobe msr
+
+Finally, we probe the board:
+
+ $ lspci -nnvvvxxxx > lspci.log 2> lspci.err.log
+ $ lsusb -vvv > lsusb.log 2> lsusb.err.log
+ $ superiotool -deV > superiotool.log 2> superiotool.err.log
+ $ inteltool -a > inteltool.log 2> inteltool.err.log
+ $ ectool -i > ectool.log 2> ectool.err.log
+ $ msrtool > msrtool.log 2> msrtool.err.log
+ $ dmidecode > dmidecode.log 2> dmidecode.err.log
+ $ biosdecode > biosdecode.log 2> biosdecode.err.log
+ $ nvramtool -x > nvramtool.log 2> nvramtool.err.log
+ $ dmesg > dmesg.log 2> dmesg.err.log
+ $ acpidump > acpidump.log 2> acpidump.err.log
+ $ for x in /sys/class/sound/card0/hw*; do cat "$x/init_pin_configs" \
+ > pin_"$(basename "$x")"; done
+ $ for x in /proc/asound/card0/codec#*; do cat "$x" > \
+ "$(basename "$x")"; done
+ $ cat /proc/cpuinfo > cpuinfo.log 2> cpuinfo.err.log
+ $ cat /proc/ioports > ioports.log 2> ioports.err.log
+ $ cat /sys/class/input/input*/id/bustype > input_bustypes.log
+ $flashrom -V -p internal:laptop=force_I_want_a_brick > \
+ flashrom_info.log 2> flashrom_info.err.log
+ $ flashrom -V -p internal:laptop=force_I_want_a_brick -r rom.bin > \
+ flashrom_read.log 2> flashrom_read.err.log
+
+[Rookie Guide: Lesson 1]: https://doc.coreboot.org/lessons/lesson1.html
--
To view, visit https://review.coreboot.org/c/coreboot/+/31849
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: Ie3b8a99c10808c7e7ebc826b4d2f992774cc9a75
Gerrit-Change-Number: 31849
Gerrit-PatchSet: 1
Gerrit-Owner: Calvin <calvin.rempel(a)gmail.com>
Gerrit-MessageType: newchange
You-Cheng Syu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32333
Change subject: util/mtkheader: Add a tool to extract bootload header from binary files.
......................................................................
util/mtkheader: Add a tool to extract bootload header from binary files.
Add a tool, extract-bl-img.py, which can extract MTK bootload header
from binary files. This could be useful for boards (e.g., Kukui) which
put the bootblock in other places (e.g., Chrome EC).
Change-Id: Ib744c80bdc2adfe27d4287365e161096e3fe08c7
Signed-off-by: You-Cheng Syu <youcheng(a)google.com>
---
A util/mtkheader/extract-bl-img.py
1 file changed, 55 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/33/32333/1
diff --git a/util/mtkheader/extract-bl-img.py b/util/mtkheader/extract-bl-img.py
new file mode 100755
index 0000000..21bf9eb
--- /dev/null
+++ b/util/mtkheader/extract-bl-img.py
@@ -0,0 +1,55 @@
+#!/usr/bin/env python
+# This file is part of the coreboot project.
+#
+# Copyright 2019 Google LLC
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+import argparse
+import struct
+import sys
+
+
+_DESCRIPTION = 'Extract MTK bootload header from a binary file.'
+
+
+def parse_args():
+ parser = argparse.ArgumentParser(description=_DESCRIPTION)
+ parser.add_argument('input_path', metavar='INPUT_FILE')
+ parser.add_argument('output_path', metavar='OUTPUT_FILE')
+ return parser.parse_args()
+
+
+def main():
+ args = parse_args()
+
+ with open(args.input_path, 'rb') as f:
+ data = f.read()
+
+ header = struct.pack('<8sII', 'BRLYT', 1, 2048)
+
+ start = -1
+ while True:
+ start = data.find(header, start + 1)
+ if start < 0:
+ raise RuntimeError('Cannot find MTK bootload header')
+ offset = start + len(header)
+ buf = struct.unpack('<II', data[offset:offset+8])
+ if buf[1] == 0x42424242:
+ break
+ size = buf[0]
+ offset = start - 512
+
+ with open(args.output_path, 'wb') as f:
+ f.write(data[offset:offset+size])
+
+
+if __name__ == '__main__':
+ main()
--
To view, visit https://review.coreboot.org/c/coreboot/+/32333
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: Ib744c80bdc2adfe27d4287365e161096e3fe08c7
Gerrit-Change-Number: 32333
Gerrit-PatchSet: 1
Gerrit-Owner: You-Cheng Syu <youcheng(a)google.com>
Gerrit-MessageType: newchange