coreboot-gerrit May 2017

coreboot-gerrit@coreboot.org

1 participants
3888 discussions

Change in coreboot[master]: detachables: Add invert parameter
by Shelley Chen (Code Review) 22 May '17

22 May '17

Hello build bot (Jenkins), I'd like you to reexamine a change. Please visit https://review.coreboot.org/19698 to look at the new patch set (#10). Change subject: detachables: Add invert parameter ...................................................................... detachables: Add invert parameter Instead of storing inverted-colored bitmaps, invert drawing of text bitmap on the fly by adding an invert parameter down to libpayload. Merging pivot and invert fields into flags field. BUG=b:35585623 BRANCH=None TEST=Make sure compiles successfully CQ-DEPEND=CL:506453 Change-Id: Ide6893a26f19eb2490377d4d53366ad145a9e6e3 Signed-off-by: Shelley Chen <shchen(a)chromium.org> --- M 3rdparty/arm-trusted-firmware M payloads/libpayload/drivers/video/graphics.c M payloads/libpayload/include/cbgfx.h 3 files changed, 27 insertions(+), 13 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/19698/10 -- To view, visit https://review.coreboot.org/19698 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newpatchset Gerrit-Change-Id: Ide6893a26f19eb2490377d4d53366ad145a9e6e3 Gerrit-PatchSet: 10 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Shelley Chen <shchen(a)google.com> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Shelley Chen <shchen(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

Change in coreboot[master]: soc/qualcomm/ipq*: Move spi driver to use spi_bus_map
by build bot (Jenkins) (Code Review) 22 May '17

22 May '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/19776 ) Change subject: soc/qualcomm/ipq*: Move spi driver to use spi_bus_map ...................................................................... Patch Set 5: Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/9903/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/54168/ : SUCCESS -- To view, visit https://review.coreboot.org/19776 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: comment Gerrit-Change-Id: I6cc8c339e008e16449fa143c1d21e23534bdaf0b Gerrit-PatchSet: 5 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Duncan Laurie <dlaurie(a)chromium.org> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-HasComments: No

1 0

Change in coreboot[master]: soc/intel: Move spi driver to use spi_bus_map
by build bot (Jenkins) (Code Review) 22 May '17

22 May '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/19778 ) Change subject: soc/intel: Move spi driver to use spi_bus_map ...................................................................... Patch Set 5: Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/9904/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/54169/ : SUCCESS -- To view, visit https://review.coreboot.org/19778 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: comment Gerrit-Change-Id: Id3f05a2ea6eb5e31ca607861973d96b507208115 Gerrit-PatchSet: 5 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Duncan Laurie <dlaurie(a)chromium.org> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: Philippe Mathieu-Daudé <philippe.mathieu.daude(a)gmail.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-HasComments: No

1 0

Change in coreboot[master]: soc/marvell/bg4cd: remove cosmos mainboard and bg4cd soc
by build bot (Jenkins) (Code Review) 22 May '17

22 May '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/19823 ) Change subject: soc/marvell/bg4cd: remove cosmos mainboard and bg4cd soc ...................................................................... Patch Set 1: Verified+1 Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/9901/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/54166/ : SUCCESS -- To view, visit https://review.coreboot.org/19823 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: comment Gerrit-Change-Id: I8faaa9bb1b90ad2936dcdbaf2882651ebba6630c Gerrit-PatchSet: 1 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-HasComments: No

1 0

Change in coreboot[master]: soc/marvell/armada38x: Move spi driver to use spi_bus_map
by Furquan Shaikh (Code Review) 22 May '17

22 May '17

Furquan Shaikh has abandoned this change. ( https://review.coreboot.org/19774 ) Change subject: soc/marvell/armada38x: Move spi driver to use spi_bus_map ...................................................................... Abandoned Deleting the SoC instead. -- To view, visit https://review.coreboot.org/19774 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: abandon Gerrit-Change-Id: I795ecd825d03a3a915222da5e920bfd581567d5f Gerrit-PatchSet: 4 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Duncan Laurie <dlaurie(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

Change in coreboot[master]: soc/marvell/armada38x: Move spi driver to use spi_bus_map
by Furquan Shaikh (Code Review) 22 May '17

22 May '17

Furquan Shaikh has posted comments on this change. ( https://review.coreboot.org/19774 ) Change subject: soc/marvell/armada38x: Move spi driver to use spi_bus_map ...................................................................... Patch Set 4: > Time delete this soc then? Pushed CL to delete the SoC: https://review.coreboot.org/#/c/19824/1 -- To view, visit https://review.coreboot.org/19774 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: comment Gerrit-Change-Id: I795ecd825d03a3a915222da5e920bfd581567d5f Gerrit-PatchSet: 4 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Duncan Laurie <dlaurie(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-HasComments: No

1 0

Change in coreboot[master]: soc/marvell/armada38x: Remove unused SoC armada38x
by Furquan Shaikh (Code Review) 22 May '17

22 May '17

Furquan Shaikh has uploaded a new change for review. ( https://review.coreboot.org/19824 ) Change subject: soc/marvell/armada38x: Remove unused SoC armada38x ...................................................................... soc/marvell/armada38x: Remove unused SoC armada38x No mainboard is actually using this SoC. Remove the code for this SoC for now. BUG=b:38430839 Change-Id: Ia35986dffda8bbd76305ef5abab6ae81cc154b0f Signed-off-by: Furquan Shaikh <furquan(a)chromium.org> --- D src/soc/marvell/armada38x/Kconfig D src/soc/marvell/armada38x/Makefile.inc D src/soc/marvell/armada38x/bootblock.c D src/soc/marvell/armada38x/bootblock_asm.S D src/soc/marvell/armada38x/cbmem.c D src/soc/marvell/armada38x/clock.c D src/soc/marvell/armada38x/gpio.c D src/soc/marvell/armada38x/i2c.c D src/soc/marvell/armada38x/include/soc/clock.h D src/soc/marvell/armada38x/include/soc/common.h D src/soc/marvell/armada38x/include/soc/gpio.h D src/soc/marvell/armada38x/include/soc/i2c.h D src/soc/marvell/armada38x/include/soc/memlayout.ld D src/soc/marvell/armada38x/include/soc/soc_services.h D src/soc/marvell/armada38x/monotonic_timer.c D src/soc/marvell/armada38x/soc.c D src/soc/marvell/armada38x/spi.c D src/soc/marvell/armada38x/uart.c 18 files changed, 0 insertions(+), 2,895 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/19824/1 diff --git a/src/soc/marvell/armada38x/Kconfig b/src/soc/marvell/armada38x/Kconfig deleted file mode 100644 index 20f9d09..0000000 --- a/src/soc/marvell/armada38x/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -config SOC_MARVELL_ARMADA38X - bool - default n - select ARCH_BOOTBLOCK_ARMV7 - select ARCH_VERSTAGE_ARMV7 - select ARCH_ROMSTAGE_ARMV7 - select ARCH_RAMSTAGE_ARMV7 - select HAVE_UART_SPECIAL - select BOOTBLOCK_CONSOLE - select BOOTBLOCK_CUSTOM - select GENERIC_UDELAY - select UART_OVERRIDE_REFCLK - -if SOC_MARVELL_ARMADA38X - -config VBOOT - select VBOOT_RETURN_FROM_VERSTAGE - -config BOOTBLOCK_CPU_INIT - string - default "soc/marvell/armada38x/bootblock.c" - help - CPU/SoC-specific bootblock code. This is useful if the - bootblock must load microcode or copy data from ROM before - searching for the bootblock. - -config CONSOLE_SERIAL_UART_ADDRESS - hex - default 0xf1012000 -endif diff --git a/src/soc/marvell/armada38x/Makefile.inc b/src/soc/marvell/armada38x/Makefile.inc deleted file mode 100644 index c55bfff..0000000 --- a/src/soc/marvell/armada38x/Makefile.inc +++ /dev/null @@ -1,44 +0,0 @@ -ifeq ($(CONFIG_SOC_MARVELL_ARMADA38X),y) - -bootblock-y += bootblock.c -bootblock-y += bootblock_asm.S -bootblock-y += spi.c -bootblock-y += gpio.c -bootblock-y += monotonic_timer.c -bootblock-y += clock.c -ifeq ($(CONFIG_BOOTBLOCK_CONSOLE),y) -bootblock-$(CONFIG_DRIVERS_UART) += uart.c -endif - -verstage-$(CONFIG_DRIVERS_UART) += uart.c -verstage-y += monotonic_timer.c -verstage-y += spi.c -verstage-y += gpio.c -verstage-y += i2c.c -verstage-y += clock.c - -romstage-y += spi.c -romstage-y += gpio.c -romstage-y += cbmem.c -romstage-y += monotonic_timer.c -romstage-$(CONFIG_DRIVERS_UART) += uart.c -romstage-y += clock.c - -ramstage-y += spi.c -ramstage-y += gpio.c -ramstage-y += cbmem.c -ramstage-y += monotonic_timer.c -ramstage-y += soc.c -ramstage-$(CONFIG_DRIVERS_UART) += uart.c -ramstage-y += clock.c - -CPPFLAGS_common += -Isrc/soc/marvell/armada38x/include/ -Isrc/commonlib/include/commonlib/ - -BIN_HDR = 3rdparty/cpu/marvell/armada38x/bin_hdr.bin -DOIMAGE = $(objutil)/marvell/doimage_mv/doimage - -$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin $(DOIMAGE) - @chmod a+x $(DOIMAGE) - $(DOIMAGE) -T flash -D 0 -E 0 -G $(BIN_HDR) $< $@ - rm $< -endif diff --git a/src/soc/marvell/armada38x/bootblock.c b/src/soc/marvell/armada38x/bootblock.c deleted file mode 100644 index 8c125b5..0000000 --- a/src/soc/marvell/armada38x/bootblock.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <assert.h> -#include <arch/io.h> -#include <arch/cache.h> -#include <arch/exception.h> -#include <arch/hlt.h> -#include <bootblock_common.h> -#include <cbfs.h> -#include <console/console.h> -#include <delay.h> -#include <arch/stages.h> -#include <symbols.h> -#include <vendorcode/google/chromeos/chromeos.h> -#include <soc/common.h> - -#define CLOCK_BIT_SATA23 BIT30 -#define CLOCK_BIT_PNC BIT29 -#define CLOCK_BIT_TDM BIT25 -#define CLOCK_BIT_CRYPTO0_GATE BIT23 -#define CLOCK_BIT_CRYPTO1_GATE BIT21 -#define CLOCK_BIT_CRYPTO1_Z BIT16 -#define CLOCK_BIT_SATA01 BIT15 -#define CLOCK_BIT_CRYPTO0_Z BIT14 -#define CLOCK_BIT_BM BIT13 -#define CLOCK_BIT_PCIE2 BIT6 -#define CLOCK_BIT_PCIE1 BIT5 -#define CLOCK_BIT_GBE0 BIT4 -#define CLOCK_BIT_GBE1 BIT3 -#define CLOCK_BIT_GBE2 BIT2 -#define CLOCK_BIT_AUDIO BIT0 - -#define A38x_MPP0_7_OFFSET 0x18000 -#define A38x_MPP8_15_OFFSET 0x18004 -#define A38x_MPP16_23_OFFSET 0x18008 -#define A38x_MPP24_31_OFFSET 0x1800c -#define A38x_MPP32_39_OFFSET 0x18010 -#define A38x_MPP40_47_OFFSET 0x18014 -#define A38x_MPP48_55_OFFSET 0x18018 -#define A38x_MPP56_63_OFFSET 0x1801c - -#define A38X_GPP_OUT_ENA_OFFSET_LOW 0x18104 -#define A38X_GPP_OUT_ENA_OFFSET_MID 0x18144 - -#define A38X_GPP_OUT_VALUE_OFFSET_LOW 0x18100 -#define A38X_GPP_OUT_VALUE_OFFSET_MID 0x18140 - -#define A38x_CUBE_BOARD_MPP0_7 0x00001111 -#define A38x_CUBE_BOARD_MPP8_15 0x46200000 -#define A38x_CUBE_BOARD_MPP16_23 0x00400444 -#define A38x_CUBE_BOARD_MPP24_31 0x00043300 -#define A38x_CUBE_BOARD_MPP32_39 0x44400000 -#define A38x_CUBE_BOARD_MPP40_47 0x00000004 -#define A38x_CUBE_BOARD_MPP48_55 0x00444444 -#define A38x_CUBE_BOARD_MPP56_63 0x00004444 - -/* Set bit x to enable GPIO output mode for MPP x */ -#define A38x_CUBE_BOARD_0_GPP_OUT_ENA_LOW ~(BIT4 | BIT6) -/* MID group is for MPP32 ~ MPP63 e.g BIT3 corresponds to MPP35 */ -#define A38x_CUBE_BOARD_0_GPP_OUT_ENA_MID ~(BIT3) - -#define A38x_CUSTOMER_BOARD_0_GPP_OUT_VAL_LOW (BIT4) -/* MID group is for MPP32 ~ MPP63 e.g BIT3 corresponds to MPP35 */ -#define A38x_CUSTOMER_BOARD_0_GPP_OUT_VAL_MID (BIT3) - -#define A38X_POWER_MANAGEMENT_CLOCK_GATING_CONTROL 0x18220 - -#define A38x_SOC_IO_ERR_CTRL_OFFSET 0x20200 -#define A38x_SOC_WIN_CTRL_OFFSET 0x20250 -#define A38x_SOC_WIN_BASE_OFFSET 0x20254 - -#define A38x_CUBE_BOARD_SOC_IO_ERR_CTRL 0x00000000 -#define A38x_CUBE_BOARD_SOC_WIN_CTRL 0x1ff00001 -#define A38x_CUBE_BOARD_SOC_BASE_CTRL 0xe0000000 - -#define DRAM_START ((uintptr_t)_dram / MiB) -#define DRAM_SIZE (CONFIG_DRAM_SIZE_MB) -/* DMA memory for drivers */ -#define DMA_START ((uintptr_t)_dma_coherent / MiB) -#define DMA_SIZE (_dma_coherent_size / MiB) - -static void setup_pinmux(void) -{ - /* Hard coded pin mux configuration */ - mrvl_reg_write(A38x_MPP0_7_OFFSET, A38x_CUBE_BOARD_MPP0_7); - mrvl_reg_write(A38x_MPP8_15_OFFSET, A38x_CUBE_BOARD_MPP8_15); - mrvl_reg_write(A38x_MPP16_23_OFFSET, A38x_CUBE_BOARD_MPP16_23); - mrvl_reg_write(A38x_MPP24_31_OFFSET, A38x_CUBE_BOARD_MPP24_31); - mrvl_reg_write(A38x_MPP32_39_OFFSET, A38x_CUBE_BOARD_MPP32_39); - mrvl_reg_write(A38x_MPP40_47_OFFSET, A38x_CUBE_BOARD_MPP40_47); - mrvl_reg_write(A38x_MPP48_55_OFFSET, A38x_CUBE_BOARD_MPP48_55); - mrvl_reg_write(A38x_MPP56_63_OFFSET, A38x_CUBE_BOARD_MPP56_63); -} - -static void setup_gpp_out_value(void) -{ - mrvl_reg_write( - A38X_GPP_OUT_VALUE_OFFSET_LOW, - A38x_CUSTOMER_BOARD_0_GPP_OUT_VAL_LOW); - mrvl_reg_write( - A38X_GPP_OUT_VALUE_OFFSET_MID, - A38x_CUSTOMER_BOARD_0_GPP_OUT_VAL_MID); -} - -static void setup_gpp_out_enable(void) -{ - mrvl_reg_write( - A38X_GPP_OUT_ENA_OFFSET_LOW, - A38x_CUBE_BOARD_0_GPP_OUT_ENA_LOW); - mrvl_reg_write( - A38X_GPP_OUT_ENA_OFFSET_MID, - A38x_CUBE_BOARD_0_GPP_OUT_ENA_MID); -} - -/* This function disable unused periperal clocks */ -static void setup_peripherals_clocks(void) -{ - mrvl_reg_bit_reset( - A38X_POWER_MANAGEMENT_CLOCK_GATING_CONTROL, ( - CLOCK_BIT_SATA23 | CLOCK_BIT_PNC | CLOCK_BIT_TDM | - CLOCK_BIT_CRYPTO0_GATE | CLOCK_BIT_CRYPTO1_GATE | - CLOCK_BIT_CRYPTO1_Z | CLOCK_BIT_SATA01 | - CLOCK_BIT_CRYPTO0_Z | CLOCK_BIT_BM | - CLOCK_BIT_PCIE2 | CLOCK_BIT_PCIE1 | - CLOCK_BIT_GBE0 | CLOCK_BIT_GBE1 | - CLOCK_BIT_GBE2 | CLOCK_BIT_AUDIO - ) - ); -} - -static void setup_win_regs(void) -{ - mrvl_reg_write(A38x_SOC_IO_ERR_CTRL_OFFSET, - A38x_CUBE_BOARD_SOC_IO_ERR_CTRL); - mrvl_reg_write(A38x_SOC_WIN_CTRL_OFFSET, A38x_CUBE_BOARD_SOC_WIN_CTRL); - mrvl_reg_write(A38x_SOC_WIN_BASE_OFFSET, A38x_CUBE_BOARD_SOC_BASE_CTRL); -} - -void main(void) -{ - if (CONFIG_BOOTBLOCK_CONSOLE) { - console_init(); - exception_init(); - } - - init_timer(); - - /* enable mmu */ - mmu_init(); - mmu_config_range(0, 4096, DCACHE_OFF); - mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK); - mmu_config_range(DMA_START, DMA_SIZE, DCACHE_OFF); - dcache_mmu_enable(); - - bootblock_mainboard_init(); - - setup_pinmux(); - setup_gpp_out_value(); - setup_gpp_out_enable(); - setup_win_regs(); - setup_peripherals_clocks(); - run_romstage(); -} diff --git a/src/soc/marvell/armada38x/bootblock_asm.S b/src/soc/marvell/armada38x/bootblock_asm.S deleted file mode 100644 index 7bb7ccf..0000000 --- a/src/soc/marvell/armada38x/bootblock_asm.S +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/asm.h> - -.arm - /* - * Just in case the maskrom or the vendor basic firmware passes on a - * parameter when calling the bootblock, store it here for handling by C - * code. - */ - .section .bss, "aw" @nobits - .global maskrom_param - .align 4 -maskrom_param: - .word 0 - -ENTRY(_start) - /* - * Set the CPU to System mode with IRQ and FIQ disabled. Prefetch/Data - * aborts may happen early and crash before the abort handlers are - * installed, but at least the problem will show up near the code that - * causes it. - */ - msr cpsr_cxf, #0xdf - bl _thumb_start -ENDPROC(_start) - -.thumb -ENTRY(_thumb_start) - - /* Preserve the maskrom passed value, if any */ - mov r10, r0 - - /* Disable L2 Cache */ - ldr r1, =0x0 - ldr r0, =0xD0008100 - str r1, [r0] - - /* Disable windows that overlap with 0xF1000000 */ - /* By default, window #12 overlaps with 0xF1000000 */ - mov r1, #0 - ldr r0, =0xD00200B0 - str r1, [r0] - /* Set Registers Base address. */ - ldr r1, =0xf1000000 - ldr r0, =0xD0020080 - str r1, [r0] - /* Update SCU (peripheral) register Base address with - * correct INTER_REG_BASE - */ - ldr r2, = 0xC000 /* SCU offset = 0xC000 */ - add r1, r1, r2 /* r1 = INTER_REG_BASE + SCU_OFFSET */ - mcr p15, 4, r1, c15, c0, 0 /* Write SCU base register */ - - bl arm_init_caches - - /* - * From Cortex-A Series Programmer's Guide: - * Only CPU 0 performs initialization. Other CPUs go into WFI - * to do this, first work out which CPU this is - * this code typically is run before any other initialization step - */ - mrc p15, 0, r1, c0, c0, 5 @ Read Multiprocessor Affinity Register - and r1, r1, #0x3 @ Extract CPU ID bits - cmp r1, #0 - bne wait_for_interrupt @ If this is not core0, wait - - /* - * Initialize the stack to a known value. This is used to check for - * stack overflow later in the boot process. - */ - ldr r0, =_stack - ldr r1, =_estack - ldr r2, =0xdeadbeef -init_stack_loop: - str r2, [r0] - add r0, #4 - cmp r0, r1 - bne init_stack_loop - - ldr r0, =_bss - ldr r1, =_ebss - mov r2, #0x00000000 /* prepare zero to clear BSS */ -clbss_l: - str r2, [r0] - add r0, #4 - cmp r0, r1 - bne clbss_l - -call_bootblock: - - /* Restore parameter passed in by maskrom/vendor firmware. */ - ldr r0, =maskrom_param - str r10, [r0] - - /* Set stackpointer in internal RAM to call bootblock main() */ - ldr sp, =_estack - ldr r0,=0x00000000 - /* - * The current design of cpu_info places the struct at the top of the - * stack. Free enough space to accommodate for that, but make sure it's - * 8-byte aligned for ABI compliance. - */ - sub sp, sp, #16 - bl main - -wait_for_interrupt: - wfi - mov pc, lr @ back to my caller -ENDPROC(_thumb_start) diff --git a/src/soc/marvell/armada38x/cbmem.c b/src/soc/marvell/armada38x/cbmem.c deleted file mode 100644 index 94719b8..0000000 --- a/src/soc/marvell/armada38x/cbmem.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <cbmem.h> -#include <soc/soc_services.h> - -void *cbmem_top(void) -{ - return (void *)_memlayout_cbmem_top; -} diff --git a/src/soc/marvell/armada38x/clock.c b/src/soc/marvell/armada38x/clock.c deleted file mode 100644 index 579e1a3..0000000 --- a/src/soc/marvell/armada38x/clock.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <soc/common.h> -#include <soc/clock.h> - -uint32_t mv_tclk_get(void) -{ - uint32_t tclk_reg_value; - uint32_t tclk; - - tclk_reg_value = (mrvl_reg_read(MPP_SAMPLE_AT_RESET)); - tclk_reg_value = ((tclk_reg_value & (1 << 15)) >> 15); - switch (tclk_reg_value) { - case 0: - tclk = MV_BOARD_TCLK_250MHZ; - case 1: - tclk = MV_BOARD_TCLK_200MHZ; - default: - tclk = MV_BOARD_TCLK_250MHZ; - } - return tclk; -} diff --git a/src/soc/marvell/armada38x/gpio.c b/src/soc/marvell/armada38x/gpio.c deleted file mode 100644 index 1c5a4c7..0000000 --- a/src/soc/marvell/armada38x/gpio.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Marvell Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <gpio.h> -#include <soc/common.h> -#include <console/console.h> - -#define MV_GPIO_MAX_NUM 59 - -#define MV_GPP_IN 0xFFFFFFFF /* GPP input */ -#define MV_GPP_OUT 0 /* GPP output */ - -#define MV_GPP_REGS_BASE(unit) (0x18100 + ((unit)*0x40)) -#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04) -#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10) -#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00) - -static void gpp_reg_set(u32 group, u32 reg_offs, u32 mask, u32 value); -static int mv_gpp_type_set(u32 group, u32 mask, u32 value); -static u32 mv_gpp_value_get(u32 group, u32 mask); -static int mv_gpp_value_set(u32 group, u32 mask, u32 value); - -void gpp_reg_set(u32 group, u32 reg_offs, u32 mask, u32 value) -{ - u32 gpp_data; - - gpp_data = mrvl_reg_read(reg_offs); - gpp_data &= ~mask; - gpp_data |= (value & mask); - mrvl_reg_write(reg_offs, gpp_data); -} - -int mv_gpp_type_set(u32 group, u32 mask, u32 value) -{ - gpp_reg_set(group, GPP_DATA_OUT_EN_REG(group), mask, value); - return MV_OK; -} - -u32 mv_gpp_value_get(u32 group, u32 mask) -{ - u32 gpp_data; - - gpp_data = mrvl_reg_read(GPP_DATA_IN_REG(group)); - gpp_data &= mask; - return gpp_data; -} - -int mv_gpp_value_set(u32 group, u32 mask, u32 value) -{ - u32 out_enable; - - /* verify that the gpp pin is configured as output*/ - /* Note that in the register out enabled -> bit = '0'.*/ - out_enable = ~(mrvl_reg_read(GPP_DATA_OUT_EN_REG(group))); - if ((out_enable & mask) != mask) { - printk(BIOS_ERR, - "Mask and out_enable mismatch(mask:0x%x, out_enable:0x%x).\n", - mask, (out_enable & mask)); - return MV_ERROR; - } - gpp_reg_set(group, GPP_DATA_OUT_REG(group), mask, value); - return MV_OK; -} - -static inline int gpio_not_valid(gpio_t gpio) -{ - return (gpio > MV_GPIO_MAX_NUM); -} - -int gpio_get(gpio_t gpio) -{ - u32 group = 0; - u32 gpp_data; - - if (gpio_not_valid(gpio)) - return MV_BAD_PARAM; - if (gpio >= 32) { - group = 1; - gpio -= 32; - } - - mv_gpp_type_set(group, (1 << gpio), MV_GPP_IN & (1 << gpio)); - gpp_data = mv_gpp_value_get(group, (1 << gpio)); - return (gpp_data != 0); -} - -void gpio_set(gpio_t gpio, int value) -{ - u32 group = 0; - - if (gpio_not_valid(gpio)) - return; - if (gpio >= 32) { - group = 1; - gpio -= 32; - } - - mv_gpp_type_set(group, (1 << gpio), MV_GPP_OUT & (1 << gpio)); - mv_gpp_value_set(group, (1 << gpio), (value ? (1 << gpio) : 0)); -} diff --git a/src/soc/marvell/armada38x/i2c.c b/src/soc/marvell/armada38x/i2c.c deleted file mode 100644 index 723d3b4..0000000 --- a/src/soc/marvell/armada38x/i2c.c +++ /dev/null @@ -1,1251 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Marvell Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <arch/cpu.h> -#include <console/console.h> -#include <delay.h> -#include <device/i2c.h> -#include <soc/common.h> -#include <soc/i2c.h> -#include <soc/clock.h> -#include <helpers.h> - -#undef MV_DEBUG -//#define MV_DEBUG -#ifdef MV_DEBUG -#define DB(x) x -#else -#define DB(x) -#endif -#define mv_os_printf(args...) printk(BIOS_INFO, args) - -/* The TWSI interface supports both 7-bit and 10-bit addressing. */ -/* This enumerator describes addressing type. */ -typedef enum _mv_twsi_addr_type { - ADDR7_BIT, /* 7 bit address */ - ADDR10_BIT /* 10 bit address */ -} MV_TWSI_ADDR_TYPE; - -/* This structure describes TWSI address. */ -typedef struct _mv_twsi_addr { - uint32_t address; /* address */ - MV_TWSI_ADDR_TYPE type; /* Address type */ -} MV_TWSI_ADDR; - -/* This structure describes a TWSI slave. */ -typedef struct _mv_twsi_slave { - MV_TWSI_ADDR slave_addr; - int valid_offset; /* whether the slave has offset (i.e. Eeprom etc.) */ - uint32_t offset; /* offset in the slave. */ - int more_than256; /* whether the ofset is bigger then 256 */ -} MV_TWSI_SLAVE; - -/* This enumerator describes TWSI protocol commands. */ -typedef enum _mv_twsi_cmd { - MV_TWSI_WRITE, /* TWSI write command - 0 according to spec */ - MV_TWSI_READ /* TWSI read command - 1 according to spec */ -} MV_TWSI_CMD; - -static void twsi_int_flg_clr(uint8_t chan_num); -static uint8_t twsi_main_int_get(uint8_t chan_num); -static void twsi_ack_bit_set(uint8_t chan_num); -static uint32_t twsi_sts_get(uint8_t chan_num); -static void twsi_reset(uint8_t chan_num); -static int twsi_addr7_bit_set(uint8_t chan_num, - uint32_t device_address, - MV_TWSI_CMD command); -static int twsi_addr10_bit_set(uint8_t chan_num, - uint32_t device_address, - MV_TWSI_CMD command); -static int twsi_data_transmit(uint8_t chan_num, - uint8_t *p_block, - uint32_t block_size); -static int twsi_data_receive(uint8_t chan_num, - uint8_t *p_block, - uint32_t block_size); -static int twsi_target_offs_set(uint8_t chan_num, - uint32_t offset, - uint8_t more_than256); -static int mv_twsi_start_bit_set(uint8_t chan_num); -static int mv_twsi_stop_bit_set(uint8_t chan_num); -static int mv_twsi_addr_set(uint8_t chan_num, - MV_TWSI_ADDR *twsi_addr, - MV_TWSI_CMD command); -static uint32_t mv_twsi_init(uint8_t chan_num, - uint32_t frequency, - uint32_t Tclk, - MV_TWSI_ADDR *twsi_addr, - uint8_t general_call_enable); -static int mv_twsi_read(uint8_t chan_num, - MV_TWSI_SLAVE *twsi_slave, - uint8_t *p_block, - uint32_t block_size); -static int mv_twsi_write(uint8_t chan_num, - MV_TWSI_SLAVE *twsi_slave, - uint8_t *p_block, - uint32_t block_size); -static uint32_t who_am_i(void); -static int i2c_init(unsigned bus); -static void i2c_reset(unsigned bus); - -static int m_initialized[MAX_I2C_NUM] = {0, 0}; - -static uint8_t twsi_timeout_chk(uint32_t timeout, const char *p_string) -{ - if (timeout >= TWSI_TIMEOUT_VALUE) { - DB(mv_os_printf("%s", p_string)); - return MV_TRUE; - } - return MV_FALSE; -} - -/******************************************************************************* -* mv_twsi_start_bit_set - Set start bit on the bus -* -* DESCRIPTION: -* This routine sets the start bit on the TWSI bus. -* The routine first checks for interrupt flag condition, then it sets -* the start bit in the TWSI Control register. -* If the interrupt flag condition check previously was set, the function -* will clear it. -* The function then wait for the start bit to be cleared by the HW. -* Then it waits for the interrupt flag to be set and eventually, the -* TWSI status is checked to be 0x8 or 0x10(repeated start bit). -* -* INPUT: -* chan_num - TWSI channel. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK if start bit was set successfuly on the bus. -* MV_FAIL if start_bit not set or status does not indicate start -* condition trasmitted. -* -*******************************************************************************/ -static int mv_twsi_start_bit_set(uint8_t chan_num) -{ - uint8_t is_int_flag = MV_FALSE; - uint32_t timeout, temp; - - DB(mv_os_printf("TWSI: mv_twsi_start_bit_set\n")); - /* check Int flag */ - if (twsi_main_int_get(chan_num)) - is_int_flag = MV_TRUE; - /* set start Bit */ - mrvl_reg_bit_set(TWSI_CONTROL_REG(chan_num), TWSI_CONTROL_START_BIT); - - /* in case that the int flag was set before i.e. repeated start bit */ - if (is_int_flag) { - DB(mv_os_printf( - "TWSI: mv_twsi_start_bit_set repeated start Bit\n")); - twsi_int_flg_clr(chan_num); - } - - /* wait for interrupt */ - timeout = 0; - while (!twsi_main_int_get(chan_num) && (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk(timeout, - (const char *)"TWSI: Start Clear bit time_out.\n")) - return MV_TIMEOUT; - - /* check that start bit went down */ - if ((mrvl_reg_read(TWSI_CONTROL_REG(chan_num)) & - TWSI_CONTROL_START_BIT) != 0) { - mv_os_printf("TWSI: start bit didn't go down\n"); - return MV_FAIL; - } - - /* check the status */ - temp = twsi_sts_get(chan_num); - if ((TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA == temp) || - (TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA == temp)) { - DB(mv_os_printf("TWSI: Lost Arb, status %x\n", temp)); - return MV_RETRY; - } else if ((temp != TWSI_START_CON_TRA) && - (temp != TWSI_REPEATED_START_CON_TRA)) { - mv_os_printf("TWSI: status %x after Set Start Bit.\n", temp); - return MV_FAIL; - } - - return MV_OK; -} - -/******************************************************************************* -* mv_twsi_stop_bit_set - Set stop bit on the bus -* -* DESCRIPTION: -* This routine set the stop bit on the TWSI bus. -* The function then wait for the stop bit to be cleared by the HW. -* Finally the function checks for status of 0xF8. -* -* INPUT: -* chan_num - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE is stop bit was set successfuly on the bus. -* -*******************************************************************************/ -static int mv_twsi_stop_bit_set(uint8_t chan_num) -{ - uint32_t timeout, temp; - - /* Generate stop bit */ - mrvl_reg_bit_set(TWSI_CONTROL_REG(chan_num), TWSI_CONTROL_STOP_BIT); - - twsi_int_flg_clr(chan_num); - - /* wait for stop bit to come down */ - timeout = 0; - while (((mrvl_reg_read(TWSI_CONTROL_REG(chan_num)) & - TWSI_CONTROL_STOP_BIT) != 0) && - (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk(timeout, - (const char *)"TWSI: ERROR - Stop bit timeout\n")) - return MV_TIMEOUT; - - /* check that the stop bit went down */ - if ((mrvl_reg_read(TWSI_CONTROL_REG(chan_num)) & - TWSI_CONTROL_STOP_BIT) != 0) { - mv_os_printf( - "TWSI: ERROR - stop bit not went down\n"); - return MV_FAIL; - } - - /* check the status */ - temp = twsi_sts_get(chan_num); - if ((TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA == temp) || - (TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA == temp)) { - DB(mv_os_printf("TWSI: Lost Arb, status %x\n", temp)); - return MV_RETRY; - } else if (temp != TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0) { - mv_os_printf( - "TWSI: ERROR - status %x after Stop Bit\n", - temp); - return MV_FAIL; - } - - return MV_OK; -} - -/******************************************************************************* -* twsi_main_int_get - Get twsi bit from main Interrupt cause. -* -* DESCRIPTION: -* This routine returns the twsi interrupt flag value. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE is interrupt flag is set, MV_FALSE otherwise. -* -*******************************************************************************/ -static uint32_t who_am_i(void) -{ - return (read_mpidr() & 0x1); -} - -static uint8_t twsi_main_int_get(uint8_t chan_num) -{ - uint32_t temp; - - /* get the int flag bit */ - temp = mrvl_reg_read(MV_TWSI_CPU_MAIN_INT_CAUSE(chan_num, who_am_i())); - if (temp & (1 << CPU_MAIN_INT_TWSI_OFFS(chan_num))) - return MV_TRUE; - - return MV_FALSE; -} - -/******************************************************************************* -* twsi_int_flg_clr - Clear Interrupt flag. -* -* DESCRIPTION: -* This routine clears the interrupt flag. It does NOT poll the interrupt -* to make sure the clear. After clearing the interrupt, it waits for at -* least 1 miliseconds. -* -* INPUT: -* chan_num - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -static void twsi_int_flg_clr(uint8_t chan_num) -{ - /* wait for 1ms to prevent TWSI register write after write problems */ - mdelay(1); - /* clear the int flag bit */ - mrvl_reg_bit_reset( - TWSI_CONTROL_REG(chan_num), TWSI_CONTROL_INT_FLAG_SET); - /* wait for 1 mili sec for the clear to take effect */ - mdelay(1); -} - -/******************************************************************************* -* twsi_ack_bit_set - Set acknowledge bit on the bus -* -* DESCRIPTION: -* This routine set the acknowledge bit on the TWSI bus. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -static void twsi_ack_bit_set(uint8_t chan_num) -{ - /*Set the Ack bit */ - mrvl_reg_bit_set(TWSI_CONTROL_REG(chan_num), TWSI_CONTROL_ACK); - /* Add delay of 1ms */ - mdelay(1); -} - -/******************************************************************************* -* twsi_init - Initialize TWSI interface -* -* DESCRIPTION: -* This routine: -* -Reset the TWSI. -* -Initialize the TWSI clock baud rate according to given frequency -* parameter based on Tclk frequency and enables TWSI slave. -* -Set the ack bit. -* -Assign the TWSI slave address according to the TWSI address Type. -* -* INPUT: -* chan_num - TWSI channel -* frequency - TWSI frequency in KHz. (up to 100_kHZ) -* -* OUTPUT: -* None. -* -* RETURN: -* Actual frequency. -* -*******************************************************************************/ -static uint32_t mv_twsi_init(uint8_t chan_num, - uint32_t frequency, - uint32_t Tclk, - MV_TWSI_ADDR *p_twsi_addr, - uint8_t general_call_enable) -{ - uint32_t n, m, freq, margin, min_margin = 0xffffffff; - uint32_t power; - uint32_t actual_freq = 0, actual_n = 0, actual_m = 0, val; - - if (frequency > 100000) - die("TWSI frequency is too high!"); - - DB(mv_os_printf("TWSI: mv_twsi_init - Tclk = %d freq = %d\n", Tclk, - frequency)); - /* Calucalte N and M for the TWSI clock baud rate */ - for (n = 0; n < 8; n++) { - for (m = 0; m < 16; m++) { - power = 2 << n; /* power = 2^(n+1) */ - freq = Tclk / (10 * (m + 1) * power); - margin = ABS(frequency - freq); - - if ((freq <= frequency) && (margin < min_margin)) { - min_margin = margin; - actual_freq = freq; - actual_n = n; - actual_m = m; - } - } - } - DB(mv_os_printf("TWSI: mv_twsi_init - act_n %u act_m %u act_freq %u\n", - actual_n, actual_m, actual_freq)); - /* Reset the TWSI logic */ - twsi_reset(chan_num); - - /* Set the baud rate */ - val = ((actual_m << TWSI_BAUD_RATE_M_OFFS) | - actual_n << TWSI_BAUD_RATE_N_OFFS); - mrvl_reg_write(TWSI_STATUS_BAUDE_RATE_REG(chan_num), val); - - /* Enable the TWSI and slave */ - mrvl_reg_write(TWSI_CONTROL_REG(chan_num), - TWSI_CONTROL_ENA | TWSI_CONTROL_ACK); - - /* set the TWSI slave address */ - if (p_twsi_addr->type == ADDR10_BIT) { - /* writing the 2 most significant bits of the 10 bit address */ - val = ((p_twsi_addr->address & TWSI_SLAVE_ADDR_10_BIT_MASK) >> - TWSI_SLAVE_ADDR_10_BIT_OFFS); - /* bits 7:3 must be 0x11110 */ - val |= TWSI_SLAVE_ADDR_10_BIT_CONST; - /* set GCE bit */ - if (general_call_enable) - val |= TWSI_SLAVE_ADDR_GCE_ENA; - /* write slave address */ - mrvl_reg_write(TWSI_SLAVE_ADDR_REG(chan_num), val); - - /* writing the 8 least significant bits of the 10 bit address */ - val = (p_twsi_addr->address << TWSI_EXTENDED_SLAVE_OFFS) & - TWSI_EXTENDED_SLAVE_MASK; - mrvl_reg_write(TWSI_EXTENDED_SLAVE_ADDR_REG(chan_num), val); - } else { - /* set the 7 Bits address */ - mrvl_reg_write(TWSI_EXTENDED_SLAVE_ADDR_REG(chan_num), 0x0); - val = (p_twsi_addr->address << TWSI_SLAVE_ADDR_7_BIT_OFFS) & - TWSI_SLAVE_ADDR_7_BIT_MASK; - mrvl_reg_write(TWSI_SLAVE_ADDR_REG(chan_num), val); - } - - /* unmask twsi int */ - mrvl_reg_bit_set(TWSI_CONTROL_REG(chan_num), TWSI_CONTROL_INT_ENA); - - /* unmask twsi int in Interrupt source control register */ - mrvl_reg_bit_set(CPU_INT_SOURCE_CONTROL_REG( - CPU_MAIN_INT_CAUSE_TWSI(chan_num)), ( - 1 << CPU_INT_SOURCE_CONTROL_IRQ_OFFS)); - - /* Add delay of 1ms */ - mdelay(1); - - return actual_freq; -} - -/******************************************************************************* -* twsi_sts_get - Get the TWSI status value. -* -* DESCRIPTION: -* This routine returns the TWSI status value. -* -* INPUT: -* chan_num - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* uint32_t - the TWSI status. -* -*******************************************************************************/ -static uint32_t twsi_sts_get(uint8_t chan_num) -{ - return mrvl_reg_read(TWSI_STATUS_BAUDE_RATE_REG(chan_num)); -} - -/******************************************************************************* -* twsi_reset - Reset the TWSI. -* -* DESCRIPTION: -* Resets the TWSI logic and sets all TWSI registers to their reset values. -* -* INPUT: -* chan_num - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* None -* -*******************************************************************************/ -static void twsi_reset(uint8_t chan_num) -{ - /* Reset the TWSI logic */ - mrvl_reg_write(TWSI_SOFT_RESET_REG(chan_num), 0); - - /* wait for 2 mili sec */ - mdelay(2); -} - -/******************************************************************************* -* mv_twsi_addr_set - Set address on TWSI bus. -* -* DESCRIPTION: -* This function Set address (7 or 10 Bit address) on the Twsi Bus. -* -* INPUT: -* chan_num - TWSI channel -* p_twsi_addr - twsi address. -* command - read / write . -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the address completed successfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static int mv_twsi_addr_set(uint8_t chan_num, - MV_TWSI_ADDR *p_twsi_addr, - MV_TWSI_CMD command) -{ - DB(mv_os_printf( - "TWSI: mv_twsi_addr7_bit_set addr %x , type %d, cmd is %s\n", - p_twsi_addr->address, p_twsi_addr->type, - ((command == MV_TWSI_WRITE) ? "Write" : "Read"))); - /* 10 Bit address */ - if (p_twsi_addr->type == ADDR10_BIT) - return twsi_addr10_bit_set(chan_num, p_twsi_addr->address, - command); - /* 7 Bit address */ - else - return twsi_addr7_bit_set(chan_num, p_twsi_addr->address, - command); -} - -/******************************************************************************* -* twsi_addr10_bit_set - Set 10 Bit address on TWSI bus. -* -* DESCRIPTION: -* There are two address phases: -* 1) Write '11110' to data register bits [7:3] and 10-bit address MSB -* (bits [9:8]) to data register bits [2:1] plus a write(0) or read(1) -*bit -* to the Data register. Then it clears interrupt flag which drive -* the address on the TWSI bus. The function then waits for interrupt -* flag to be active and status 0x18 (write) or 0x40 (read) to be set. -* 2) write the rest of 10-bit address to data register and clears -* interrupt flag which drive the address on the TWSI bus. The -* function then waits for interrupt flag to be active and status -* 0xD0 (write) or 0xE0 (read) to be set. -* -* INPUT: -* chan_num - TWSI channel -* device_address - twsi address. -* command - read / write . -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the address completed successfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static int twsi_addr10_bit_set(uint8_t chan_num, - uint32_t device_address, - MV_TWSI_CMD command) -{ - uint32_t val, timeout; - - /* writing the 2 most significant bits of the 10 bit address */ - val = ((device_address & TWSI_DATA_ADDR_10_BIT_MASK) >> - TWSI_DATA_ADDR_10_BIT_OFFS); - /* bits 7:3 must be 0x11110 */ - val |= TWSI_DATA_ADDR_10_BIT_CONST; - /* set command */ - val |= command; - mrvl_reg_write(TWSI_DATA_REG(chan_num), val); - /* WA add a delay */ - mdelay(1); - - /* clear Int flag */ - twsi_int_flg_clr(chan_num); - - /* wait for Int to be Set */ - timeout = 0; - while (!twsi_main_int_get(chan_num) && (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk( - timeout, (const char *)"TWSI: addr (10_bit) Int time_out.\n")) - return MV_TIMEOUT; - - /* check the status */ - val = twsi_sts_get(chan_num); - if ((TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA == val) || - (TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA == val)) { - DB(mv_os_printf("TWSI: Lost Arb, status %x\n", val)); - return MV_RETRY; - } else if (((val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && - (command == MV_TWSI_READ)) || - ((val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && - (command == MV_TWSI_WRITE))) { - mv_os_printf("TWSI: status %x 1st addr (10 Bit) in %s mode.\n", - val, - ((command == MV_TWSI_WRITE) ? "Write" : "Read")); - return MV_FAIL; - } - - /* set 8 LSB of the address */ - val = (device_address << TWSI_DATA_ADDR_7_BIT_OFFS) & - TWSI_DATA_ADDR_7_BIT_MASK; - mrvl_reg_write(TWSI_DATA_REG(chan_num), val); - - /* clear Int flag */ - twsi_int_flg_clr(chan_num); - - /* wait for Int to be Set */ - timeout = 0; - while (!twsi_main_int_get(chan_num) && (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk(timeout, - (const char *)"TWSI: 2nd (10 Bit) Int tim_out.\n")) - return MV_TIMEOUT; - - /* check the status */ - val = twsi_sts_get(chan_num); - if ((TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA == val) || - (TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA == val)) { - DB(mv_os_printf("TWSI: Lost Arb, status %x\n", val)); - return MV_RETRY; - } else if (((val != TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC) && - (command == MV_TWSI_READ)) || - ((val != TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC) && - (command == MV_TWSI_WRITE))) { - mv_os_printf("TWSI: status %x 2nd addr(10 Bit) in %s mode.\n", - val, - ((command == MV_TWSI_WRITE) ? "Write" : "Read")); - return MV_FAIL; - } - - return MV_OK; -} - -/******************************************************************************* -* twsi_addr7_bit_set - Set 7 Bit address on TWSI bus. -* -* DESCRIPTION: -* This function writes 7 bit address plus a write or read bit to the -* Data register. Then it clears interrupt flag which drive the address on -* the TWSI bus. The function then waits for interrupt flag to be active -* and status 0x18 (write) or 0x40 (read) to be set. -* -* INPUT: -* chan_num - TWSI channel -* device_address - twsi address. -* command - read / write . -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the address completed successfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static int twsi_addr7_bit_set(uint8_t chan_num, - uint32_t device_address, - MV_TWSI_CMD command) -{ - uint32_t val, timeout; - - /* set the address */ - val = (device_address << TWSI_DATA_ADDR_7_BIT_OFFS) & - TWSI_DATA_ADDR_7_BIT_MASK; - /* set command */ - val |= command; - mrvl_reg_write(TWSI_DATA_REG(chan_num), val); - /* WA add a delay */ - mdelay(1); - - /* clear Int flag */ - twsi_int_flg_clr(chan_num); - - /* wait for Int to be Set */ - timeout = 0; - while (!twsi_main_int_get(chan_num) && (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk( - timeout, (const char *)"TWSI: Addr (7 Bit) int time_out.\n")) - return MV_TIMEOUT; - - /* check the status */ - val = twsi_sts_get(chan_num); - if ((TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA == val) || - (TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA == val)) { - DB(mv_os_printf("TWSI: Lost Arb, status %x\n", val)); - return MV_RETRY; - } else if (((val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && - (command == MV_TWSI_READ)) || - ((val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && - (command == MV_TWSI_WRITE))) { - /* only in debug, since in boot we try to read the SPD of both - DRAM, and we don't - want error messeges in case DIMM doesn't exist. */ - DB(mv_os_printf( - "TWSI: status %x addr (7 Bit) in %s mode.\n", val, - ((command == MV_TWSI_WRITE) ? "Write" : "Read"))); - return MV_FAIL; - } - - return MV_OK; -} - -/******************************************************************************* -* twsi_data_write - Trnasmit a data block over TWSI bus. -* -* DESCRIPTION: -* This function writes a given data block to TWSI bus in 8 bit -* granularity. -* first The function waits for interrupt flag to be active then -* For each 8-bit data: -* The function writes data to data register. It then clears -* interrupt flag which drives the data on the TWSI bus. -* The function then waits for interrupt flag to be active and status -* 0x28 to be set. -* -* -* INPUT: -* chan_num - TWSI channel -* p_block - Data block. -* block_size - number of chars in p_block. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if transmiting the block completed successfully, -* MV_BAD_PARAM - if p_block is NULL, -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static int twsi_data_transmit(uint8_t chan_num, - uint8_t *p_block, - uint32_t block_size) -{ - uint32_t timeout, temp, block_size_wr = block_size; - - if (NULL == p_block) - return MV_BAD_PARAM; - - /* wait for Int to be Set */ - timeout = 0; - while (!twsi_main_int_get(chan_num) && (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk(timeout, - (const char *)"TWSI: Read Data Int time_out.\n")) - return MV_TIMEOUT; - - while (block_size_wr) { - /* write the data */ - mrvl_reg_write(TWSI_DATA_REG(chan_num), (uint32_t)*p_block); - DB(mv_os_printf( - "TWSI: twsi_data_transmit place = %d write %x\n", - block_size - block_size_wr, *p_block)); - p_block++; - block_size_wr--; - - twsi_int_flg_clr(chan_num); - - /* wait for Int to be Set */ - timeout = 0; - while (!twsi_main_int_get(chan_num) && - (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == twsi_timeout_chk( - timeout, (const char *)"TWSI: time_out.\n")) - return MV_TIMEOUT; - - /* check the status */ - temp = twsi_sts_get(chan_num); - if ((TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA == temp) || - (TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA == - temp)) { - DB(mv_os_printf("TWSI: Lost Arb, status %x\n", temp)); - return MV_RETRY; - } else if (temp != TWSI_M_TRAN_DATA_BYTE_ACK_REC) { - mv_os_printf("TWSI: status %x in write trans\n", temp); - return MV_FAIL; - } - } - - return MV_OK; -} - -/******************************************************************************* -* twsi_data_receive - Receive data block from TWSI bus. -* -* DESCRIPTION: -* This function receive data block from TWSI bus in 8bit granularity -* into p_block buffer. -* first The function waits for interrupt flag to be active then -* For each 8-bit data: -* It clears the interrupt flag which allows the next data to be -* received from TWSI bus. -* The function waits for interrupt flag to be active, -* and status reg is 0x50. -* Then the function reads data from data register, and copies it to -* the given buffer. -* -* INPUT: -* chan_num - TWSI channel -* block_size - number of bytes to read. -* -* OUTPUT: -* p_block - Data block. -* -* RETURN: -* MV_OK - if receive transaction completed successfully, -* MV_BAD_PARAM - if p_block is NULL, -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static int twsi_data_receive(uint8_t chan_num, - uint8_t *p_block, - uint32_t block_size) -{ - uint32_t timeout, temp, block_size_rd = block_size; - - if (NULL == p_block) - return MV_BAD_PARAM; - - /* wait for Int to be Set */ - timeout = 0; - while (!twsi_main_int_get(chan_num) && (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk(timeout, - (const char *)"TWSI: Read Data int Time out .\n")) - return MV_TIMEOUT; - - while (block_size_rd) { - if (block_size_rd == 1) - /* clear ack and Int flag */ - mrvl_reg_bit_reset( - TWSI_CONTROL_REG(chan_num), TWSI_CONTROL_ACK); - - twsi_int_flg_clr(chan_num); - /* wait for Int to be Set */ - timeout = 0; - while ((!twsi_main_int_get(chan_num)) && - (timeout++ < TWSI_TIMEOUT_VALUE)) - ; - - /* check for timeout */ - if (MV_TRUE == - twsi_timeout_chk(timeout, (const char *)"TWSI: Timeout.\n")) - return MV_TIMEOUT; - - /* check the status */ - temp = twsi_sts_get(chan_num); - if ((TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA == temp) || - (TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA == - temp)) { - DB(mv_os_printf("TWSI: Lost Arb, status %x\n", temp)); - return MV_RETRY; - } else if ((temp != TWSI_M_REC_RD_DATA_ACK_TRA) && - (block_size_rd != 1)) { - mv_os_printf("TWSI: status %x in read trans\n", temp); - return MV_FAIL; - } else if ((temp != TWSI_M_REC_RD_DATA_ACK_NOT_TRA) && - (block_size_rd == 1)) { - mv_os_printf("TWSI: status %x in Rd Terminate\n", temp); - return MV_FAIL; - } - - /* read the data */ - *p_block = (uint8_t)mrvl_reg_read(TWSI_DATA_REG(chan_num)); - DB(mv_os_printf("TWSI: twsi_data_receive place %d read %x\n", - block_size - block_size_rd, *p_block)); - p_block++; - block_size_rd--; - } - - return MV_OK; -} - -/******************************************************************************* -* twsi_target_offs_set - Set TWST target offset on TWSI bus. -* -* DESCRIPTION: -* The function support TWSI targets that have inside address space (for -* example EEPROMs). The function: -* 1) Convert the given offset into p_block and size. -* in case the offset should be set to a TWSI slave which support -* more then 256 bytes offset, the offset setting will be done -* in 2 transactions. -* 2) Use twsi_data_transmit to place those on the bus. -* -* INPUT: -* chan_num - TWSI channel -* offset - offset to be set on the EEPROM device. -* more_than256 - whether the EEPROM device support more then 256 byte -*offset. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the offset completed successfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static int twsi_target_offs_set(uint8_t chan_num, - uint32_t offset, - uint8_t more_than256) -{ - uint8_t off_block[2]; - uint32_t off_size; - - if (more_than256 == MV_TRUE) { - off_block[0] = (offset >> 8) & 0xff; - off_block[1] = offset & 0xff; - off_size = 2; - } else { - off_block[0] = offset & 0xff; - off_size = 1; - } - DB(mv_os_printf( - "TWSI: twsi_target_offs_set off_size = %x addr1 = %x addr2 = %x\n", - off_size, off_block[0], off_block[1])); - return twsi_data_transmit(chan_num, off_block, off_size); -} - -/******************************************************************************* -* mv_twsi_read - Read data block from a TWSI Slave. -* -* DESCRIPTION: -* The function calls the following functions: -* -) mv_twsi_start_bit_set(); -* if (EEPROM device) -* -) mv_twsi_addr_set(w); -* -) twsi_target_offs_set(); -* -) mv_twsi_start_bit_set(); -* -) mv_twsi_addr_set(r); -* -) twsi_data_receive(); -* -) mv_twsi_stop_bit_set(); -* -* INPUT: -* chan_num - TWSI channel -* p_twsi_slave - Twsi Slave structure. -* block_size - number of bytes to read. -* -* OUTPUT: -* p_block - Data block. -* -* RETURN: -* MV_OK - if EEPROM read transaction completed successfully, -* MV_BAD_PARAM - if p_block is NULL, -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static int mv_twsi_read(uint8_t chan_num, - MV_TWSI_SLAVE *p_twsi_slave, - uint8_t *p_block, - uint32_t block_size) -{ - int rc; - int ret = MV_FAIL; - uint32_t counter = 0; - - if ((NULL == p_block) || (NULL == p_twsi_slave)) - return MV_BAD_PARAM; - - do { - /* wait for 1 mili sec for the clear to take effect */ - if (counter > 0) - mdelay(1); - ret = mv_twsi_start_bit_set(chan_num); - - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "mv_twsi_read:mv_twsi_start_bit_set failed\n")); - return MV_FAIL; - } - - DB(mv_os_printf( - "TWSI: mv_twsi_eeprom_read after mv_twsi_start_bit_set\n")); - - /* in case offset exsist (i.e. eeprom ) */ - if (MV_TRUE == p_twsi_slave->valid_offset) { - rc = mv_twsi_addr_set(chan_num, - &(p_twsi_slave->slave_addr), - MV_TWSI_WRITE); - if (MV_RETRY == rc) - continue; - else if (MV_OK != rc) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "mv_twsi_addr_set(%d,0x%x,%d) rc=%d\n", - chan_num, - (uint32_t) &(p_twsi_slave->slave_addr), - MV_TWSI_WRITE, rc)); - return MV_FAIL; - } - - ret = - twsi_target_offs_set(chan_num, p_twsi_slave->offset, - p_twsi_slave->more_than256); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "TWSI: twsi_target_offs_set Failed\n")); - return MV_FAIL; - } - DB(mv_os_printf("TWSI: after twsi_target_offs_set\n")); - ret = mv_twsi_start_bit_set(chan_num); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "TWSI: mv_twsi_start_bit_set failed\n")); - return MV_FAIL; - } - DB(mv_os_printf("TWSI: after mv_twsi_start_bit_set\n")); - } - ret = mv_twsi_addr_set(chan_num, &(p_twsi_slave->slave_addr), - MV_TWSI_READ); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "mv_twsi_read: mv_twsi_addr_set 2 Failed\n")); - return MV_FAIL; - } - DB(mv_os_printf( - "TWSI: mv_twsi_eeprom_read after mv_twsi_addr_set\n")); - - ret = twsi_data_receive(chan_num, p_block, block_size); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "mv_twsi_read: twsi_data_receive Failed\n")); - return MV_FAIL; - } - DB(mv_os_printf( - "TWSI: mv_twsi_eeprom_read after twsi_data_receive\n")); - - ret = mv_twsi_stop_bit_set(chan_num); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - DB(mv_os_printf( - "mv_twsi_read: mv_twsi_stop_bit_set 3 Failed\n")); - return MV_FAIL; - } - counter++; - } while ((MV_RETRY == ret) && (counter < MAX_RETRY_CNT)); - - if (counter == MAX_RETRY_CNT) - DB(mv_os_printf("mv_twsi_write: Retry Expire\n")); - - twsi_ack_bit_set(chan_num); - - DB(mv_os_printf( - "TWSI: mv_twsi_eeprom_read after mv_twsi_stop_bit_set\n")); - - return MV_OK; -} - -/******************************************************************************* -* mv_twsi_write - Write data block to a TWSI Slave. -* -* DESCRIPTION: -* The function calls the following functions: -* -) mv_twsi_start_bit_set(); -* -) mv_twsi_addr_set(); -* -)if (EEPROM device) -* -) twsi_target_offs_set(); -* -) twsi_data_transmit(); -* -) mv_twsi_stop_bit_set(); -* -* INPUT: -* chan_num - TWSI channel -* eeprom_address - eeprom address. -* block_size - number of bytes to write. -* p_block - Data block. -* -* OUTPUT: -* None -* -* RETURN: -* MV_OK - if EEPROM read transaction completed successfully. -* MV_BAD_PARAM - if p_block is NULL, -* MV_FAIL otherwmise. -* -* NOTE: Part of the EEPROM, required that the offset will be aligned to the -* max write burst supported. -*******************************************************************************/ -static int mv_twsi_write(uint8_t chan_num, - MV_TWSI_SLAVE *p_twsi_slave, - uint8_t *p_block, - uint32_t block_size) -{ - int ret = MV_FAIL; - uint32_t counter = 0; - - if ((NULL == p_block) || (NULL == p_twsi_slave)) - return MV_BAD_PARAM; - - do { - if (counter > - 0) /* wait for 1 mili sec for the clear to take effect */ - mdelay(1); - ret = mv_twsi_start_bit_set(chan_num); - - if (MV_RETRY == ret) - continue; - - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "mv_twsi_write: mv_twsi_start_bit_set failed\n")); - return MV_FAIL; - } - - ret = mv_twsi_addr_set(chan_num, &(p_twsi_slave->slave_addr), - MV_TWSI_WRITE); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "mv_twsi_write: mv_twsi_addr_set failed\n")); - return MV_FAIL; - } - - /* in case offset exsist (i.e. eeprom ) */ - if (MV_TRUE == p_twsi_slave->valid_offset) { - ret = - twsi_target_offs_set(chan_num, p_twsi_slave->offset, - p_twsi_slave->more_than256); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "TWSI: twsi_target_offs_set failed\n")); - return MV_FAIL; - } - } - - ret = twsi_data_transmit(chan_num, p_block, block_size); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - mv_twsi_stop_bit_set(chan_num); - DB(mv_os_printf( - "mv_twsi_write: twsi_data_transmit failed\n")); - return MV_FAIL; - } - ret = mv_twsi_stop_bit_set(chan_num); - if (MV_RETRY == ret) - continue; - else if (MV_OK != ret) { - DB(mv_os_printf( - "mv_twsi_write: failed to set stopbit\n")); - return MV_FAIL; - } - counter++; - } while ((MV_RETRY == ret) && (counter < MAX_RETRY_CNT)); - - if (counter == MAX_RETRY_CNT) - DB(mv_os_printf("mv_twsi_write: Retry Expire\n")); - - return MV_OK; -} - -static int i2c_init(unsigned bus) -{ - if (bus >= MAX_I2C_NUM) - return 1; - - if (!m_initialized[bus]) { - /* TWSI init */ - MV_TWSI_ADDR slave; - - slave.type = ADDR7_BIT; - slave.address = 0; - mv_twsi_init(bus, TWSI_SPEED, mv_tclk_get(), &slave, 0); - m_initialized[bus] = 1; - } - - return 0; -} - -static void i2c_reset(unsigned bus) -{ - if (bus < MAX_I2C_NUM) - m_initialized[bus] = 0; -} - -int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int seg_count) -{ - struct i2c_seg *seg = segments; - int ret = 0; - MV_TWSI_SLAVE twsi_slave; - - if (i2c_init(bus)) - return 1; - - while (!ret && seg_count--) { - twsi_slave.slave_addr.address = seg->chip; - twsi_slave.slave_addr.type = ADDR7_BIT; - twsi_slave.more_than256 = MV_FALSE; - twsi_slave.valid_offset = MV_FALSE; - if (seg->read) - ret = - mv_twsi_read(bus, &twsi_slave, seg->buf, seg->len); - else - ret = - mv_twsi_write(bus, &twsi_slave, seg->buf, seg->len); - seg++; - } - - if (ret) { - i2c_reset(bus); - DB(mv_os_printf("mv_twsi_read/mv_twsi_write failed\n")); - return 1; - } - - return 0; -} diff --git a/src/soc/marvell/armada38x/include/soc/clock.h b/src/soc/marvell/armada38x/include/soc/clock.h deleted file mode 100644 index 82af937..0000000 --- a/src/soc/marvell/armada38x/include/soc/clock.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __SOC_MARVELL_ARMADA38X_CLOCK_H_ -#define __SOC_MARVELL_ARMADA38X_CLOCK_H_ - -uint32_t mv_tclk_get(void); - -#endif // __SOC_MARVELL_ARMADA38X_CLOCK_H_ diff --git a/src/soc/marvell/armada38x/include/soc/common.h b/src/soc/marvell/armada38x/include/soc/common.h deleted file mode 100644 index 3a8799c..0000000 --- a/src/soc/marvell/armada38x/include/soc/common.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Marvell Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __SOC_MARVELL_ARMADA38X_COMMON_H_ -#define __SOC_MARVELL_ARMADA38X_COMMON_H_ - -#include <types.h> -#include <arch/io.h> - -#define INTER_REGS_BASE 0xF1000000 - -#define MV_TRUE (1) -#define MV_FALSE (0) - -/* The following is a list of Marvell status */ -#define MV_ERROR (-1) -#define MV_OK (0) -#define MV_FAIL (1) -#define MV_BAD_VALUE (2) -#define MV_OUT_OF_RANGE (3) -#define MV_BAD_PARAM (4) -#define MV_BAD_PTR (5) -#define MV_BAD_SIZE (6) -#define MV_BAD_STATE (7) -#define MV_SET_ERROR (8) -#define MV_GET_ERROR (9) -#define MV_CREATE_ERROR (10) -#define MV_NOT_FOUND (11) -#define MV_NO_MORE (12) -#define MV_NO_SUCH (13) -#define MV_TIMEOUT (14) -#define MV_NO_CHANGE (15) -#define MV_NOT_SUPPORTED (16) -#define MV_NOT_IMPLEMENTED (17) -#define MV_NOT_INITIALIZED (18) -#define MV_NO_RESOURCE (19) -#define MV_FULL (20) -#define MV_EMPTY (21) -#define MV_INIT_ERROR (22) -#define MV_HW_ERROR (23) -#define MV_TX_ERROR (24) -#define MV_RX_ERROR (25) -#define MV_NOT_READY (26) -#define MV_ALREADY_EXIST (27) -#define MV_OUT_OF_CPU_MEM (28) -#define MV_NOT_STARTED (29) -#define MV_BUSY (30) -#define MV_TERMINATE (31) -#define MV_NOT_ALIGNED (32) -#define MV_NOT_ALLOWED (33) -#define MV_WRITE_PROTECT (34) -#define MV_DROPPED (35) -#define MV_STOLEN (36) -#define MV_CONTINUE (37) -#define MV_RETRY (38) - -#define MV_INVALID (int)(-1) - -#define MV_BOARD_TCLK_200MHZ 200000000 -#define MV_BOARD_TCLK_250MHZ 250000000 - -#define MPP_SAMPLE_AT_RESET (0x18600) - -#define MV_6810_DEV_ID 0x6810 - -#define BIT0 0x00000001 -#define BIT1 0x00000002 -#define BIT2 0x00000004 -#define BIT3 0x00000008 -#define BIT4 0x00000010 -#define BIT5 0x00000020 -#define BIT6 0x00000040 -#define BIT7 0x00000080 -#define BIT8 0x00000100 -#define BIT9 0x00000200 -#define BIT10 0x00000400 -#define BIT11 0x00000800 -#define BIT12 0x00001000 -#define BIT13 0x00002000 -#define BIT14 0x00004000 -#define BIT15 0x00008000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - -static inline uint32_t mrvl_reg_read(uint32_t offset) -{ - return read32((void *)(INTER_REGS_BASE + offset)); -} -static inline void mrvl_reg_write(uint32_t offset, uint32_t val) -{ - write32((void *)(INTER_REGS_BASE + offset), val); -} -static inline void mrvl_reg_bit_set(uint32_t offset, uint32_t bit_mask) -{ - mrvl_reg_write(offset, (mrvl_reg_read(offset) | bit_mask)); -} -static inline void mrvl_reg_bit_reset(uint32_t offset, uint32_t bit_mask) -{ - mrvl_reg_write(offset, (mrvl_reg_read(offset) & (~bit_mask))); -} - -#endif // __SOC_MARVELL_ARMADA38X_COMMON_H__ diff --git a/src/soc/marvell/armada38x/include/soc/gpio.h b/src/soc/marvell/armada38x/include/soc/gpio.h deleted file mode 100644 index e3cd7c0..0000000 --- a/src/soc/marvell/armada38x/include/soc/gpio.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __SOC_MARVELL_ARMADA38X_GPIO_H_ -#define __SOC_MARVELL_ARMADA38X_GPIO_H_ - -#include <types.h> - -typedef u32 gpio_t; - -#endif // __SOC_MARVELL_ARMADA38X_GPIO_H__ diff --git a/src/soc/marvell/armada38x/include/soc/i2c.h b/src/soc/marvell/armada38x/include/soc/i2c.h deleted file mode 100644 index 7de2953..0000000 --- a/src/soc/marvell/armada38x/include/soc/i2c.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Marvell Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __SOC_MARVELL_ARMADA38X_I2C_H_ -#define __SOC_MARVELL_ARMADA38X_I2C_H_ - -#include <types.h> - -#define TWSI_SPEED 100000 - -#define MAX_I2C_NUM 2 -#define MAX_RETRY_CNT 1000 -#define TWSI_TIMEOUT_VALUE 0x500 - -#define MV_TWSI_SLAVE_REGS_OFFSET(chan_num) (0x11000 + (chan_num * 0x100)) -#define MV_TWSI_SLAVE_REGS_BASE(unit) (MV_TWSI_SLAVE_REGS_OFFSET(unit)) -#define TWSI_SLAVE_ADDR_REG(chan_num) (MV_TWSI_SLAVE_REGS_BASE(chan_num) + 0x00) - -#define MV_CPUIF_REGS_OFFSET(cpu) (0x21800 + (cpu)*0x100) -#define MV_CPUIF_REGS_BASE(cpu) (MV_CPUIF_REGS_OFFSET(cpu)) -#define CPU_MAIN_INT_CAUSE_REG(vec, cpu) \ - (MV_CPUIF_REGS_BASE(cpu) + 0x80 + (vec * 0x4)) -#define CPU_MAIN_INT_TWSI_OFFS(i) (2 + i) -#define CPU_MAIN_INT_CAUSE_TWSI(i) (31 + i) -#define TWSI_CPU_MAIN_INT_CAUSE_REG(cpu) CPU_MAIN_INT_CAUSE_REG(1, (cpu)) -#define MV_TWSI_CPU_MAIN_INT_CAUSE(ch_num, cpu) TWSI_CPU_MAIN_INT_CAUSE_REG(cpu) - -#define MV_MBUS_REGS_OFFSET (0x20000) -#define MV_CPUIF_SHARED_REGS_BASE (MV_MBUS_REGS_OFFSET) -#define CPU_INT_SOURCE_CONTROL_REG(i) \ - (MV_CPUIF_SHARED_REGS_BASE + 0xB00 + (i * 0x4)) - -#define CPU_INT_SOURCE_CONTROL_IRQ_OFFS 28 -#define CPU_INT_SOURCE_CONTROL_IRQ_MASK (1 << CPU_INT_SOURCE_CONTROL_IRQ_OFFS) - -#define TWSI_SLAVE_ADDR_GCE_ENA BIT(0) -#define TWSI_SLAVE_ADDR_7_BIT_OFFS 0x1 -#define TWSI_SLAVE_ADDR_7_BIT_MASK (0xFF << TWSI_SLAVE_ADDR_7_BIT_OFFS) -#define TWSI_SLAVE_ADDR_10_BIT_OFFS 0x7 -#define TWSI_SLAVE_ADDR_10_BIT_MASK 0x300 -#define TWSI_SLAVE_ADDR_10_BIT_CONST 0xF0 - -#define TWSI_DATA_REG(chan_num) (MV_TWSI_SLAVE_REGS_BASE(chan_num) + 0x04) -#define TWSI_DATA_COMMAND_OFFS 0x0 -#define TWSI_DATA_COMMAND_MASK (0x1 << TWSI_DATA_COMMAND_OFFS) -#define TWSI_DATA_COMMAND_WR (0x1 << TWSI_DATA_COMMAND_OFFS) -#define TWSI_DATA_COMMAND_RD (0x0 << TWSI_DATA_COMMAND_OFFS) -#define TWSI_DATA_ADDR_7_BIT_OFFS 0x1 -#define TWSI_DATA_ADDR_7_BIT_MASK (0xFF << TWSI_DATA_ADDR_7_BIT_OFFS) -#define TWSI_DATA_ADDR_10_BIT_OFFS 0x7 -#define TWSI_DATA_ADDR_10_BIT_MASK 0x300 -#define TWSI_DATA_ADDR_10_BIT_CONST 0xF0 - -#define TWSI_CONTROL_REG(chan_num) (MV_TWSI_SLAVE_REGS_BASE(chan_num) + 0x08) -#define TWSI_CONTROL_ACK BIT(2) -#define TWSI_CONTROL_INT_FLAG_SET BIT(3) -#define TWSI_CONTROL_STOP_BIT BIT(4) -#define TWSI_CONTROL_START_BIT BIT(5) -#define TWSI_CONTROL_ENA BIT(6) -#define TWSI_CONTROL_INT_ENA BIT(7) - -#define TWSI_STATUS_BAUDE_RATE_REG(chan_num) \ - (MV_TWSI_SLAVE_REGS_BASE(chan_num) + 0x0c) -#define TWSI_BAUD_RATE_N_OFFS 0 -#define TWSI_BAUD_RATE_N_MASK (0x7 << TWSI_BAUD_RATE_N_OFFS) -#define TWSI_BAUD_RATE_M_OFFS 3 -#define TWSI_BAUD_RATE_M_MASK (0xF << TWSI_BAUD_RATE_M_OFFS) - -#define TWSI_EXTENDED_SLAVE_ADDR_REG(chan_num) \ - (MV_TWSI_SLAVE_REGS_BASE(chan_num) + 0x10) -#define TWSI_EXTENDED_SLAVE_OFFS 0 -#define TWSI_EXTENDED_SLAVE_MASK (0xFF << TWSI_EXTENDED_SLAVE_OFFS) - -#define TWSI_SOFT_RESET_REG(chan_num) (MV_TWSI_SLAVE_REGS_BASE(chan_num) + 0x1c) - -#define TWSI_BUS_ERROR 0x00 -#define TWSI_START_CON_TRA 0x08 -#define TWSI_REPEATED_START_CON_TRA 0x10 -#define TWSI_AD_PLS_WR_BIT_TRA_ACK_REC 0x18 -#define TWSI_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0x20 -#define TWSI_M_TRAN_DATA_BYTE_ACK_REC 0x28 -#define TWSI_M_TRAN_DATA_BYTE_ACK_NOT_REC 0x30 -#define TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA 0x38 -#define TWSI_AD_PLS_RD_BIT_TRA_ACK_REC 0x40 -#define TWSI_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0x48 -#define TWSI_M_REC_RD_DATA_ACK_TRA 0x50 -#define TWSI_M_REC_RD_DATA_ACK_NOT_TRA 0x58 -#define TWSI_SLA_REC_AD_PLS_WR_BIT_ACK_TRA 0x60 -#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_W 0x68 -#define TWSI_GNL_CALL_REC_ACK_TRA 0x70 -#define TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA 0x78 -#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_TRAN 0x80 -#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_NOT_TRAN 0x88 -#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_TRAN 0x90 -#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_NOT_TRAN 0x98 -#define TWSI_SLA_REC_STOP_OR_REPEATED_STRT_CON 0xA0 -#define TWSI_SLA_REC_AD_PLS_RD_BIT_ACK_TRA 0xA8 -#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_R 0xB0 -#define TWSI_SLA_TRA_RD_DATA_ACK_REC 0xB8 -#define TWSI_SLA_TRA_RD_DATA_ACK_NOT_REC 0xC0 -#define TWSI_SLA_TRA_LAST_RD_DATA_ACK_REC 0xC8 -#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC 0xD0 -#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0xD8 -#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC 0xE0 -#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0xE8 -#define TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0 0xF8 - -#endif // __SOC_MARVELL_ARMADA38X_I2C_H__ diff --git a/src/soc/marvell/armada38x/include/soc/memlayout.ld b/src/soc/marvell/armada38x/include/soc/memlayout.ld deleted file mode 100644 index b7f34ea..0000000 --- a/src/soc/marvell/armada38x/include/soc/memlayout.ld +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <memlayout.h> -#include <arch/header.ld> - -SECTIONS -{ - DRAM_START(0x00000000) - BOOTBLOCK(0x00000000, 24K) - RAMSTAGE(0x00800000, 128K) - CBFS_CACHE(0x12006000, 80K) - STACK(0x1201c000, 16K) - - VERSTAGE(0x1202c000, 96K) - ROMSTAGE(0x12044000, 96K) - VBOOT2_WORK(0x1205c000, 16K) - DMA_COHERENT(0x12100000, 2M) - SYMBOL(memlayout_cbmem_top, 0x1F400000) - TTB(0x1FF00000, 16K) - TTB_SUBTABLES(0x1FF04000, 2K) -} diff --git a/src/soc/marvell/armada38x/include/soc/soc_services.h b/src/soc/marvell/armada38x/include/soc/soc_services.h deleted file mode 100644 index 2659961..0000000 --- a/src/soc/marvell/armada38x/include/soc/soc_services.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __SOC_MARVELL_ARMADA38X_SOC_SERVICES_H_ -#define __SOC_MARVELL_ARMADA38X_SOC_SERVICES_H_ - -#include <types.h> - -extern u8 _memlayout_cbmem_top[]; - -#endif /*__SOC_MARVELL_ARMADA38X_SOC_SERVICES_H_*/ diff --git a/src/soc/marvell/armada38x/monotonic_timer.c b/src/soc/marvell/armada38x/monotonic_timer.c deleted file mode 100644 index 49fa6cd..0000000 --- a/src/soc/marvell/armada38x/monotonic_timer.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <timer.h> -#include <delay.h> - -#define TIMER_CTRL_REG 0xf1020300 -#define TIMER_RELOAD_REG 0xf1020310 -#define TIMER_REG 0xf1020314 -#define TIMER_RELOAD_VALUE 0xffffffff - -#define MHZ_NUM 25 - -void init_timer(void) -{ - unsigned int reg; - - /* Set the reload timer */ - write32((void *)TIMER_RELOAD_REG, TIMER_RELOAD_VALUE); - /* Set the initial value to TIMER_RELOAD_VALUE - 1 - * (instead of TIMER_RELOAD_VALUE) to avoid 'fake' - * overflow being detected in timer_monotonic_get - * if it's called close enough with 'this' function */ - write32((void *)TIMER_REG, TIMER_RELOAD_VALUE - 1); - reg = read32((const void *)TIMER_CTRL_REG); - /* Let it start counting */ - reg |= 0x3; - write32((void *)TIMER_CTRL_REG, reg); -} - -void timer_monotonic_get(struct mono_time *mt) -{ - static uint64_t total_ticks = 0; - uint64_t overflow = 0; - uint32_t current_ticks = - TIMER_RELOAD_VALUE - read32((const void *)TIMER_REG); - - /* Assuming at most one overflow happened since last call */ - if (current_ticks <= total_ticks) - overflow = 1ULL << 32; - - total_ticks = (((total_ticks + overflow) >> 32) << 32) + current_ticks; - mono_time_set_usecs(mt, total_ticks / MHZ_NUM); -} diff --git a/src/soc/marvell/armada38x/soc.c b/src/soc/marvell/armada38x/soc.c deleted file mode 100644 index d049391..0000000 --- a/src/soc/marvell/armada38x/soc.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <vendorcode/google/chromeos/chromeos.h> -#include <symbols.h> - -#define RESERVED_SIZE_KB (1 * KiB) - -static void soc_enable(device_t dev) -{ - /* Reserve bottom 1M bytes for MMU/TTB */ - reserved_ram_resource(dev, 0, ((uintptr_t)_dram / KiB + - (CONFIG_DRAM_SIZE_MB * KiB - RESERVED_SIZE_KB)), - RESERVED_SIZE_KB); - ram_resource(dev, 0, (uintptr_t)_dram / KiB, - (CONFIG_DRAM_SIZE_MB * KiB) - RESERVED_SIZE_KB); -} - -static void soc_init(device_t dev) -{ - printk(BIOS_INFO, "CPU: Armada 38X\n"); -} - -static struct device_operations soc_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = soc_enable, - .init = soc_init, - .scan_bus = 0, -}; - -static void enable_armada38x_dev(device_t dev) -{ - dev->ops = &soc_ops; -} - -struct chip_operations soc_marvell_armada38x_ops = { - CHIP_NAME("SOC Marvell Armada 38x") - .enable_dev = enable_armada38x_dev, -}; diff --git a/src/soc/marvell/armada38x/spi.c b/src/soc/marvell/armada38x/spi.c deleted file mode 100644 index 47631f4..0000000 --- a/src/soc/marvell/armada38x/spi.c +++ /dev/null @@ -1,488 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Marvell Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <delay.h> -#include <spi_flash.h> -#include <stdlib.h> -#include <string.h> -#include <assert.h> -#include <console/console.h> -#include <soc/common.h> -#include <soc/clock.h> - -/****************************************************************************** -base type define -*******************************************************************************/ -#define MV_SPI_REG_READ mrvl_reg_read -#define MV_SPI_REG_WRITE mrvl_reg_write -#define MV_SPI_REG_BIT_SET mrvl_reg_bit_set -#define MV_SPI_REG_BIT_RESET mrvl_reg_bit_reset - -#define MV_SPI_REGS_OFFSET(unit) (0x10600 + (unit * 0x80)) -#define MV_SPI_REGS_BASE(unit) (MV_SPI_REGS_OFFSET(unit)) -#define MV_SPI_IF_CONFIG_REG(spi_id) (MV_SPI_REGS_BASE(spi_id) + 0x04) -#define MV_SPI_SPR_OFFSET 0 -#define MV_SPI_SPR_MASK (0xF << MV_SPI_SPR_OFFSET) -#define MV_SPI_SPPR_0_OFFSET 4 -#define MV_SPI_SPPR_0_MASK (0x1 << MV_SPI_SPPR_0_OFFSET) -#define MV_SPI_SPPR_HI_OFFSET 6 -#define MV_SPI_SPPR_HI_MASK (0x3 << MV_SPI_SPPR_HI_OFFSET) - -#define MV_SPI_BYTE_LENGTH_OFFSET 5 /* bit 5 */ -#define MV_SPI_BYTE_LENGTH_MASK (0x1 << MV_SPI_BYTE_LENGTH_OFFSET) - -#define MV_SPI_IF_CTRL_REG(spi_id) (MV_SPI_REGS_BASE(spi_id) + 0x00) -#define MV_SPI_CS_ENABLE_OFFSET 0 /* bit 0 */ -#define MV_SPI_CS_ENABLE_MASK (0x1 << MV_SPI_CS_ENABLE_OFFSET) - -#define MV_SPI_CS_NUM_OFFSET 2 -#define MV_SPI_CS_NUM_MASK (0x7 << MV_SPI_CS_NUM_OFFSET) -#define MV_SPI_CPOL_OFFSET 11 -#define MV_SPI_CPOL_MASK (0x1 << MV_SPI_CPOL_OFFSET) -#define MV_SPI_CPHA_OFFSET 12 -#define MV_SPI_CPHA_MASK (0x1 << MV_SPI_CPHA_OFFSET) -#define MV_SPI_TXLSBF_OFFSET 13 -#define MV_SPI_TXLSBF_MASK (0x1 << MV_SPI_TXLSBF_OFFSET) -#define MV_SPI_RXLSBF_OFFSET 14 -#define MV_SPI_RXLSBF_MASK (0x1 << MV_SPI_RXLSBF_OFFSET) - -/* SPI transfer flags */ -#define SPI_XFER_BEGIN 0x01 -#define SPI_XFER_END 0x02 - -#define MV_SPI_INT_CAUSE_REG(spi_id) (MV_SPI_REGS_BASE(spi_id) + 0x10) -#define MV_SPI_DATA_OUT_REG(spi_id) (MV_SPI_REGS_BASE(spi_id) + 0x08) -#define MV_SPI_WAIT_RDY_MAX_LOOP 100000 -#define MV_SPI_DATA_IN_REG(spi_id) (MV_SPI_REGS_BASE(spi_id) + 0x0c) - -#define MV_SPI_TMNG_PARAMS_REG(spi_id) (MV_SPI_REGS_BASE(spi_id) + 0x18) -#define MV_SPI_TMISO_SAMPLE_OFFSET 6 -#define MV_SPI_TMISO_SAMPLE_MASK (0x3 << MV_SPI_TMISO_SAMPLE_OFFSET) - -#define CONFIG_ENV_SPI_MAX_HZ 50000000 -#define CONFIG_SF_DEFAULT_SPEED CONFIG_ENV_SPI_MAX_HZ - -#define CMD_READ_ARRAY_FAST 0x0b - -/****************************************************************************** -base type define end -*******************************************************************************/ - -/****************************************************************************** -struct define -*******************************************************************************/ -typedef enum { - SPI_TYPE_FLASH = 0, - SPI_TYPE_SLIC_ZARLINK_SILABS, - SPI_TYPE_SLIC_LANTIQ, - SPI_TYPE_SLIC_ZSI, - SPI_TYPE_SLIC_ISI -} MV_SPI_TYPE; - -typedef struct { - unsigned short ctrl_model; - unsigned int tclk; -} MV_SPI_HAL_DATA; - -typedef struct { - int clock_pol_low; - enum { SPI_CLK_HALF_CYC, SPI_CLK_BEGIN_CYC } clock_phase; - int tx_msb_first; - int rx_msb_first; -} MV_SPI_IF_PARAMS; - -typedef struct { - /* Does this device support 16 bits access */ - int en16_bit; - /* should we assert / disassert CS for each byte we read / write */ - int byte_cs_asrt; - int clock_pol_low; - unsigned int baud_rate; - unsigned int clk_phase; -} MV_SPI_TYPE_INFO; - -/****************************************************************************** -struct define end -*******************************************************************************/ - -/****************************************************************************** -param define -*******************************************************************************/ -static MV_SPI_HAL_DATA spi_hal_data; -static MV_SPI_TYPE_INFO *curr_spi_info = NULL; -static MV_SPI_TYPE_INFO spi_types[] = { {.en16_bit = MV_TRUE, - .clock_pol_low = MV_TRUE, - .byte_cs_asrt = MV_FALSE, - .baud_rate = (20 << 20), /* 20_m */ - .clk_phase = SPI_CLK_BEGIN_CYC}, - {.en16_bit = MV_FALSE, - .clock_pol_low = MV_TRUE, - .byte_cs_asrt = MV_TRUE, - .baud_rate = 0x00800000, - .clk_phase = SPI_CLK_BEGIN_CYC}, - {.en16_bit = MV_FALSE, - .clock_pol_low = MV_TRUE, - .byte_cs_asrt = MV_FALSE, - .baud_rate = 0x00800000, - .clk_phase = SPI_CLK_BEGIN_CYC}, - {.en16_bit = MV_FALSE, - .clock_pol_low = MV_TRUE, - .byte_cs_asrt = MV_TRUE, - .baud_rate = 0x00800000, - .clk_phase = SPI_CLK_HALF_CYC}, - {.en16_bit = MV_FALSE, - .clock_pol_low = MV_FALSE, - .byte_cs_asrt = MV_TRUE, - .baud_rate = 0x00200000, - .clk_phase = SPI_CLK_HALF_CYC} }; - -/****************************************************************************** -param define end -*******************************************************************************/ - -static int mv_spi_baud_rate_set(unsigned char spi_id, - unsigned int serial_baud_rate); -static void mv_spi_cs_deassert(unsigned char spi_id); -static int mv_spi_cs_set(unsigned char spi_id, unsigned char cs_id); -static int mv_spi_if_config_set(unsigned char spi_id, - MV_SPI_IF_PARAMS *if_params); -static int mv_spi_params_set(unsigned char spi_id, - unsigned char cs_id, - MV_SPI_TYPE type); -static int mv_spi_init(unsigned char spi_id, - unsigned char cs_id, - unsigned int serial_baud_rate, - MV_SPI_HAL_DATA *hal_data); -static int mv_spi_sys_init(unsigned char spi_id, - unsigned char cs_id, - unsigned int serial_baud_rate); -static void mv_spi_cs_assert(unsigned char spi_id); -static int mv_spi_8bit_data_tx_rx(unsigned char spi_id, - unsigned char tx_data, - unsigned char *p_rx_data); - -int mv_spi_baud_rate_set(unsigned char spi_id, unsigned int serial_baud_rate) -{ - unsigned int spr, sppr; - unsigned int divider; - unsigned int best_spr = 0, best_sppr = 0; - unsigned char exact_match = 0; - unsigned int min_baud_offset = 0xFFFFFFFF; - unsigned int cpu_clk = spi_hal_data.tclk; /*mv_cpu_pclk_get();*/ - unsigned int temp_reg; - - assert(cpu_clk != serial_baud_rate); - /* Find the best prescale configuration - less or equal */ - for (spr = 1; spr <= 15; spr++) { - for (sppr = 0; sppr <= 7; sppr++) { - divider = spr * (1 << sppr); - /* check for higher - irrelevant */ - if ((cpu_clk / divider) > serial_baud_rate) - continue; - - /* check for exact fit */ - if ((cpu_clk / divider) == serial_baud_rate) { - best_spr = spr; - best_sppr = sppr; - exact_match = 1; - break; - } - - /* check if this is better than the previous one */ - if ((serial_baud_rate - (cpu_clk / divider)) < - min_baud_offset) { - min_baud_offset = - serial_baud_rate - cpu_clk / divider; - best_spr = spr; - best_sppr = sppr; - } - } - - if (exact_match == 1) - break; - } - - if (best_spr == 0) { - printk(BIOS_INFO, "%s ERROR: SPI baud rate prescale error!\n", - __func__); - return MV_OUT_OF_RANGE; - } - - /* configure the Prescale */ - temp_reg = MV_SPI_REG_READ(MV_SPI_IF_CONFIG_REG(spi_id)) & - ~(MV_SPI_SPR_MASK | MV_SPI_SPPR_0_MASK | MV_SPI_SPPR_HI_MASK); - temp_reg |= ((best_spr << MV_SPI_SPR_OFFSET) | - ((best_sppr & 0x1) << MV_SPI_SPPR_0_OFFSET) | - ((best_sppr >> 1) << MV_SPI_SPPR_HI_OFFSET)); - MV_SPI_REG_WRITE(MV_SPI_IF_CONFIG_REG(spi_id), temp_reg); - - return MV_OK; -} - -void mv_spi_cs_deassert(unsigned char spi_id) -{ - MV_SPI_REG_BIT_RESET(MV_SPI_IF_CTRL_REG(spi_id), MV_SPI_CS_ENABLE_MASK); -} - -int mv_spi_cs_set(unsigned char spi_id, unsigned char cs_id) -{ - unsigned int ctrl_reg; - static unsigned char last_cs_id = 0xFF; - static unsigned char last_spi_id = 0xFF; - - if (cs_id > 7) - return MV_BAD_PARAM; - - if ((last_spi_id == spi_id) && (last_cs_id == cs_id)) - return MV_OK; - - ctrl_reg = MV_SPI_REG_READ(MV_SPI_IF_CTRL_REG(spi_id)); - ctrl_reg &= ~MV_SPI_CS_NUM_MASK; - ctrl_reg |= (cs_id << MV_SPI_CS_NUM_OFFSET); - MV_SPI_REG_WRITE(MV_SPI_IF_CTRL_REG(spi_id), ctrl_reg); - - last_spi_id = spi_id; - last_cs_id = cs_id; - - return MV_OK; -} - -int mv_spi_if_config_set(unsigned char spi_id, MV_SPI_IF_PARAMS *if_params) -{ - unsigned int ctrl_reg; - - ctrl_reg = MV_SPI_REG_READ(MV_SPI_IF_CONFIG_REG(spi_id)); - - /* Set Clock Polarity */ - ctrl_reg &= ~(MV_SPI_CPOL_MASK | MV_SPI_CPHA_MASK | MV_SPI_TXLSBF_MASK | - MV_SPI_RXLSBF_MASK); - if (if_params->clock_pol_low) - ctrl_reg |= MV_SPI_CPOL_MASK; - - if (if_params->clock_phase == SPI_CLK_BEGIN_CYC) - ctrl_reg |= MV_SPI_CPHA_MASK; - - if (if_params->tx_msb_first) - ctrl_reg |= MV_SPI_TXLSBF_MASK; - - if (if_params->rx_msb_first) - ctrl_reg |= MV_SPI_RXLSBF_MASK; - - MV_SPI_REG_WRITE(MV_SPI_IF_CONFIG_REG(spi_id), ctrl_reg); - - return MV_OK; -} - -int mv_spi_params_set(unsigned char spi_id, - unsigned char cs_id, - MV_SPI_TYPE type) -{ - MV_SPI_IF_PARAMS if_params; - - if (MV_OK != mv_spi_cs_set(spi_id, cs_id)) { - printk(BIOS_INFO, "Error, setting SPI CS failed\n"); - return MV_ERROR; - } - - if (curr_spi_info != (&(spi_types[type]))) { - curr_spi_info = &(spi_types[type]); - mv_spi_baud_rate_set(spi_id, curr_spi_info->baud_rate); - - if_params.clock_pol_low = curr_spi_info->clock_pol_low; - if_params.clock_phase = curr_spi_info->clk_phase; - if_params.tx_msb_first = MV_FALSE; - if_params.rx_msb_first = MV_FALSE; - mv_spi_if_config_set(spi_id, &if_params); - } - - return MV_OK; -} - -int mv_spi_init(unsigned char spi_id, - unsigned char cs_id, - unsigned int serial_baud_rate, - MV_SPI_HAL_DATA *hal_data) -{ - int ret; - unsigned int timing_reg; - - spi_hal_data.ctrl_model = hal_data->ctrl_model; - spi_hal_data.tclk = hal_data->tclk; - - /* Set the serial clock */ - ret = mv_spi_baud_rate_set(spi_id, serial_baud_rate); - if (ret != MV_OK) - return ret; - - /* Configure the default SPI mode to be 8bit */ - MV_SPI_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG(spi_id), - MV_SPI_BYTE_LENGTH_MASK); - - timing_reg = MV_SPI_REG_READ(MV_SPI_TMNG_PARAMS_REG(spi_id)); - timing_reg &= ~MV_SPI_TMISO_SAMPLE_MASK; - timing_reg |= (0x2) << MV_SPI_TMISO_SAMPLE_OFFSET; - MV_SPI_REG_WRITE(MV_SPI_TMNG_PARAMS_REG(spi_id), timing_reg); - - /* Verify that the CS is deasserted */ - mv_spi_cs_deassert(spi_id); - - mv_spi_params_set(spi_id, cs_id, SPI_TYPE_FLASH); - - return MV_OK; -} - -int mv_spi_sys_init(unsigned char spi_id, - unsigned char cs_id, - unsigned int serial_baud_rate) -{ - MV_SPI_HAL_DATA hal_data; - - hal_data.ctrl_model = MV_6810_DEV_ID; - hal_data.tclk = mv_tclk_get(); - - return mv_spi_init(spi_id, cs_id, serial_baud_rate, &hal_data); -} - -void mv_spi_cs_assert(unsigned char spi_id) -{ - MV_SPI_REG_BIT_SET(MV_SPI_IF_CTRL_REG(spi_id), MV_SPI_CS_ENABLE_MASK); -} - -int mv_spi_8bit_data_tx_rx(unsigned char spi_id, - unsigned char tx_data, - unsigned char *p_rx_data) -{ - unsigned int i; - int ready = MV_FALSE; - - if (curr_spi_info->byte_cs_asrt) - mv_spi_cs_assert(spi_id); - - /* First clear the bit in the interrupt cause register */ - MV_SPI_REG_WRITE(MV_SPI_INT_CAUSE_REG(spi_id), 0x0); - - /* Transmit data */ - MV_SPI_REG_WRITE(MV_SPI_DATA_OUT_REG(spi_id), tx_data); - - /* wait with timeout for memory ready */ - for (i = 0; i < MV_SPI_WAIT_RDY_MAX_LOOP; i++) { - if (MV_SPI_REG_READ(MV_SPI_INT_CAUSE_REG(spi_id))) { - ready = MV_TRUE; - break; - } - } - - if (!ready) { - if (curr_spi_info->byte_cs_asrt) { - mv_spi_cs_deassert(spi_id); - /* WA to compansate Zarlink SLIC CS off time */ - udelay(4); - } - return MV_TIMEOUT; - } - - /* check that the RX data is needed */ - if (p_rx_data) - *p_rx_data = MV_SPI_REG_READ(MV_SPI_DATA_IN_REG(spi_id)); - - if (curr_spi_info->byte_cs_asrt) { - mv_spi_cs_deassert(spi_id); - /* WA to compansate Zarlink SLIC CS off time */ - udelay(4); - } - - return MV_OK; -} - -static int mrvl_spi_xfer(const struct spi_slave *slave, - size_t bitlen, - const void *dout, - void *din) -{ - int ret; - unsigned char *pdout = (unsigned char *)dout; - unsigned char *pdin = (unsigned char *)din; - int tmp_bitlen = bitlen; - unsigned char tmp_dout = 0; - - /* Verify that the SPI mode is in 8bit mode */ - MV_SPI_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG(slave->bus), - MV_SPI_BYTE_LENGTH_MASK); - - while (tmp_bitlen > 0) { - if (pdout) - tmp_dout = (*pdout) & 0xff; - - /* Transmitted and wait for the transfer to be completed */ - ret = mv_spi_8bit_data_tx_rx(slave->bus, tmp_dout, pdin); - if (ret != MV_OK) - return ret; - - /* increment the pointers */ - if (pdin) - pdin++; - if (pdout) - pdout++; - - tmp_bitlen -= 8; - } - return 0; -} - -static int spi_ctrlr_claim_bus(const struct spi_slave *slave) -{ - mv_spi_cs_set(slave->bus, slave->cs); - mv_spi_cs_assert(slave->bus); - return 0; -} - -static void spi_ctrlr_release_bus(const struct spi_slave *slave) -{ - mv_spi_cs_deassert(slave->bus); -} - -static int spi_ctrlr_xfer(const struct spi_slave *slave, - const void *dout, - size_t out_bytes, - void *din, - size_t in_bytes) -{ - int ret = -1; - - if (out_bytes) - ret = mrvl_spi_xfer(slave, out_bytes * 8, dout, din); - else if (in_bytes) - ret = mrvl_spi_xfer(slave, in_bytes * 8, dout, din); - else - die("Unexpected condition in spi_xfer\n"); - return ret; -} - -static const spi_ctrlr spi_ctrlr = { - .claim_bus = spi_ctrlr_claim_bus, - .release_bus = spi_ctrlr_release_bus, - .xfer = spi_ctrlr_xfer, - .max_xfer_size = SPI_CTRLR_DEFAULT_MAX_XFER_SIZE, -}; - -int spi_setup_slave(unsigned int bus, unsigned int cs, struct spi_slave *slave) -{ - slave->bus = bus; - slave->cs = cs; - slave->ctrlr = &spi_ctrlr; - mv_spi_sys_init(bus, cs, CONFIG_SF_DEFAULT_SPEED); - return 0; -} diff --git a/src/soc/marvell/armada38x/uart.c b/src/soc/marvell/armada38x/uart.c deleted file mode 100644 index c2800d0..0000000 --- a/src/soc/marvell/armada38x/uart.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2015 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <console/uart.h> -#include <console/console.h> -#include <drivers/uart/uart8250reg.h> -#include <boot/coreboot_tables.h> -#include <stdint.h> -#include <assert.h> -#include <soc/common.h> -#include <soc/clock.h> - -struct armada38x_uart { - union { - uint32_t thr; // Transmit holding register. - uint32_t rbr; // Receive buffer register. - uint32_t dll; // Divisor latch lsb. - }; - union { - uint32_t ier; // Interrupt enable register. - uint32_t dlm; // Divisor latch msb. - }; - union { - uint32_t iir; // Interrupt identification register. - uint32_t fcr; // FIFO control register. - }; - uint32_t lcr; // Line control register. - uint32_t mcr; // Modem control register. - uint32_t lsr; // Line status register. - uint32_t msr; // Modem status register. -} __attribute__ ((packed)); - -static void armada38x_uart_tx_flush(struct armada38x_uart *uart_ptr); -static int armada38x_uart_tst_byte(struct armada38x_uart *uart_ptr); - -static void armada38x_uart_init(struct armada38x_uart *uart_ptr) -{ - const uint8_t line_config = UART8250_LCR_WLS_8; - uint16_t divisor = (u16) uart_baudrate_divisor(default_baudrate(), - uart_platform_refclk(), 16); - - armada38x_uart_tx_flush(uart_ptr); - // Disable interrupts. - write8(&uart_ptr->ier, 0); - // Enable access to divisor latches. - write8(&uart_ptr->lcr, UART8250_LCR_DLAB); - // Set the divisor. - write8(&uart_ptr->dll, divisor & 0xff); - write8(&uart_ptr->dlm, (divisor >> 8) & 0xff); - // Hide divisor latches and program line config. - write8(&uart_ptr->lcr, line_config); - // Enable FIFOs, and clear receive and transmit. - write8(&uart_ptr->fcr, UART8250_FCR_FIFO_EN | UART8250_FCR_CLEAR_RCVR | - UART8250_FCR_CLEAR_XMIT); -} - -static void armada38x_uart_tx_byte(struct armada38x_uart *uart_ptr, - unsigned char data) -{ - while (!(read8(&uart_ptr->lsr) & UART8250_LSR_THRE)) - ; - write8(&uart_ptr->thr, data); -} - -static void armada38x_uart_tx_flush(struct armada38x_uart *uart_ptr) -{ - while (!(read8(&uart_ptr->lsr) & UART8250_LSR_TEMT)) - ; -} - -static unsigned char armada38x_uart_rx_byte(struct armada38x_uart *uart_ptr) -{ - if (!armada38x_uart_tst_byte(uart_ptr)) - return 0; - return read8(&uart_ptr->rbr); -} - -static int armada38x_uart_tst_byte(struct armada38x_uart *uart_ptr) -{ - return (read8(&uart_ptr->lsr) & UART8250_LSR_DR) == UART8250_LSR_DR; -} - -unsigned int uart_platform_refclk(void) -{ - return mv_tclk_get(); -} - -uintptr_t uart_platform_base(int idx) -{ - /* Default to UART 0 */ - unsigned int base = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; - - assert((idx >= 0) && (idx < 2)); - base += idx * 0x100; - return base; -} - -void uart_init(int idx) -{ - struct armada38x_uart *uart_ptr = uart_platform_baseptr(idx); - - armada38x_uart_init(uart_ptr); -} - -void uart_tx_byte(int idx, unsigned char data) -{ - struct armada38x_uart *uart_ptr = uart_platform_baseptr(idx); - - armada38x_uart_tx_byte(uart_ptr, data); -} - -void uart_tx_flush(int idx) -{ - struct armada38x_uart *uart_ptr = uart_platform_baseptr(idx); - - armada38x_uart_tx_flush(uart_ptr); -} - -unsigned char uart_rx_byte(int idx) -{ - struct armada38x_uart *uart_ptr = uart_platform_baseptr(idx); - - return armada38x_uart_rx_byte(uart_ptr); -} - -#if ENV_RAMSTAGE -void uart_fill_lb(void *data) -{ - struct lb_serial serial; - - serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; - serial.baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE); - serial.baud = default_baudrate(); - serial.regwidth = 4; - lb_add_serial(&serial, data); - - lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); -} -#endif -- To view, visit https://review.coreboot.org/19824 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Ia35986dffda8bbd76305ef5abab6ae81cc154b0f Gerrit-PatchSet: 1 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Furquan Shaikh <furquan(a)google.com>

1 0

Change in coreboot[master]: soc/marvell/bg4cd: remove cosmos mainboard and bg4cd soc
by Furquan Shaikh (Code Review) 22 May '17

22 May '17

Furquan Shaikh has posted comments on this change. ( https://review.coreboot.org/19823 ) Change subject: soc/marvell/bg4cd: remove cosmos mainboard and bg4cd soc ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://review.coreboot.org/19823 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: comment Gerrit-Change-Id: I8faaa9bb1b90ad2936dcdbaf2882651ebba6630c Gerrit-PatchSet: 1 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-HasComments: No

1 0

Change in coreboot[master]: drivers/spi/spi-generic: Make spi_setup_slave strong symbol
by Furquan Shaikh (Code Review) 22 May '17

22 May '17

Furquan Shaikh has posted comments on this change. ( https://review.coreboot.org/19781 ) Change subject: drivers/spi/spi-generic: Make spi_setup_slave strong symbol ...................................................................... Patch Set 4: > Or nuke cosmos? It was never completed iirc. Yes, that is another way to go about it and that seems necessary anyways. Even with NO_SPI, board selecting SPI_FLASH but not having SPI support does not make sense? -- To view, visit https://review.coreboot.org/19781 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: comment Gerrit-Change-Id: I59b9bbb5303dad7ce062958a0ab8dee49a4ec1e0 Gerrit-PatchSet: 4 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Duncan Laurie <dlaurie(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-HasComments: No

1 0

Change in coreboot[master]: drivers/spi/spi-generic: Make spi_setup_slave strong symbol
by Furquan Shaikh (Code Review) 22 May '17

22 May '17

Furquan Shaikh has posted comments on this change. ( https://review.coreboot.org/19781 ) Change subject: drivers/spi/spi-generic: Make spi_setup_slave strong symbol ...................................................................... Patch Set 4: > I was wondering that. We're unconditionally adding spi-generic.c to all the builds. Should we add a NO_SPI Kconfig that will help guard the spi-generic calls? Yeah, I think we would need something like that. -- To view, visit https://review.coreboot.org/19781 To unsubscribe, visit https://review.coreboot.org/settings Gerrit-MessageType: comment Gerrit-Change-Id: I59b9bbb5303dad7ce062958a0ab8dee49a4ec1e0 Gerrit-PatchSet: 4 Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Owner: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Duncan Laurie <dlaurie(a)chromium.org> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-HasComments: No

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit May 2017