Patch set updated for coreboot: e01bdb8 Revert "Butterfly, Stout: Force SATA link speed to 3 Gbps"

[Alexandru Gagniuc]

Alexandru Gagniuc ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4762

-gerrit

commit e01bdb85060d39651c56aa5e056de57d0201222d
Author: Alexandru Gagniuc 
Date:   Mon Jan 20 22:26:05 2014 +0100

Revert "Butterfly, Stout: Force SATA link speed to 3 Gbps"

This reverts commit 7b8952c19d8d809b7aeec629b31e1c3d66f19884.

This commit was a hack to solve potential hangs caused by SSD bugs,
    but the workaround limited the SATA speed of all connected drives,
    despite the problem being localized to one specific model. As such,
    this solution is a layering violation, as it makes too many
    assumptions about the connected hardware.

Since the SATA speed can now be limited by CMOS config, and is limited
    by default on butterfly and stout, the hard limit in devicetree.cb is
    of no further use.

Change-Id: Ia35f7e8a24f9cb701ce0e357d9b3e929c4e0a4fb
    Signed-off-by: Alexandru Gagniuc 
---
 src/mainboard/google/butterfly/devicetree.cb | 2 --
 src/mainboard/google/stout/devicetree.cb     | 2 --
 2 files changed, 4 deletions(-)

diff --git a/src/mainboard/google/butterfly/devicetree.cb b/src/mainboard/google/butterfly/devicetree.cb
index 36f3ba3..c797fb0 100644
--- a/src/mainboard/google/butterfly/devicetree.cb
+++ b/src/mainboard/google/butterfly/devicetree.cb
@@ -58,8 +58,6 @@ chip northbridge/intel/sandybridge

# Enable SATA ports 0 & 1
    		register "sata_port_map" = "0x3"
-			# Set max SATA speed to 3.0 Gb/s
-			register "sata_interface_speed_limit" = "0x2"

# Enable EC Port 0x68/0x6C
    		register "gen1_dec" = "0x00040069"
diff --git a/src/mainboard/google/stout/devicetree.cb b/src/mainboard/google/stout/devicetree.cb
index e157035..a9e499f 100644
--- a/src/mainboard/google/stout/devicetree.cb
+++ b/src/mainboard/google/stout/devicetree.cb
@@ -58,8 +58,6 @@ chip northbridge/intel/sandybridge
    		register "gpi6_routing" = "2"

register "sata_port_map" = "0x3"
-			# Set max SATA speed to 3.0 Gb/s
-			register "sata_interface_speed_limit" = "0x2"

# Enable EC Port 0x68/0x6C
    		register "gen1_dec" = "0x00040069"