Felix Singer has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31695
Change subject: mb/topstar/u931: Add mainboard ......................................................................
mb/topstar/u931: Add mainboard
Change-Id: I84d1d4ecfce9bb4cce3d0f38c0e559eddae00cb1 Signed-off-by: Felix Singer migy@darmstadt.ccc.de --- A src/mainboard/topstar/u931/Kconfig A src/mainboard/topstar/u931/Kconfig.name A src/mainboard/topstar/u931/Makefile.inc A src/mainboard/topstar/u931/acpi_tables.c A src/mainboard/topstar/u931/board_info.txt A src/mainboard/topstar/u931/devicetree.cb A src/mainboard/topstar/u931/dsdt.asl A src/mainboard/topstar/u931/gpio.h A src/mainboard/topstar/u931/pei_data.c A src/mainboard/topstar/u931/pei_data.h A src/mainboard/topstar/u931/ramstage.c A src/mainboard/topstar/u931/romstage.c 12 files changed, 561 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/95/31695/1
diff --git a/src/mainboard/topstar/u931/Kconfig b/src/mainboard/topstar/u931/Kconfig new file mode 100644 index 0000000..fb4e200 --- /dev/null +++ b/src/mainboard/topstar/u931/Kconfig @@ -0,0 +1,65 @@ +config BOARD_TOPSTAR_U931 + def_bool n + select SYSTEM_TYPE_LAPTOP + select BOARD_ROMSIZE_KB_8192 + select USE_BLOBS + select ADD_FSP_BINARIES + select FSP_USE_REPO + select SOC_INTEL_SKYLAKE + select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select MAINBOARD_USES_FSP2_0 + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM2 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_SMI_HANDLER +# select HAVE_CMOS_DEFAULT +# select SPD_READ_BY_WORD + +if BOARD_TOPSTAR_U931 + +config MAINBOARD_DIR + string + default "topstar/u931" + +config MAINBOARD_VENDOR + string + default "Topstar" + +config MAINBOARD_PART_NUMBER + string + default "U931" + +config CBFS_SIZE + hex + default 0x600000 + +config CONSOLE_POST + bool + default y + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config MAX_CPUS + int + default 8 + +config VGA_BIOS_FILE + string + default "pci8086,1916.rom" + +config VGA_BIOS_ID + string + default "8086,1916" + +config DIMM_MAX + int + default 1 + +config DIMM_SPD_SIZE + int + default 512 + +endif diff --git a/src/mainboard/topstar/u931/Kconfig.name b/src/mainboard/topstar/u931/Kconfig.name new file mode 100644 index 0000000..92ce1f1 --- /dev/null +++ b/src/mainboard/topstar/u931/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_TOPSTAR_U931 + bool "U931" diff --git a/src/mainboard/topstar/u931/Makefile.inc b/src/mainboard/topstar/u931/Makefile.inc new file mode 100644 index 0000000..e932d2f --- /dev/null +++ b/src/mainboard/topstar/u931/Makefile.inc @@ -0,0 +1,19 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2015 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +romstage-y += pei_data.c + +ramstage-y += pei_data.c +ramstage-y += ramstage.c diff --git a/src/mainboard/topstar/u931/acpi_tables.c b/src/mainboard/topstar/u931/acpi_tables.c new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/topstar/u931/acpi_tables.c diff --git a/src/mainboard/topstar/u931/board_info.txt b/src/mainboard/topstar/u931/board_info.txt new file mode 100644 index 0000000..abba823 --- /dev/null +++ b/src/mainboard/topstar/u931/board_info.txt @@ -0,0 +1,8 @@ +Vendor name: Topstar +Board name: U931 +Category: laptop +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2017 diff --git a/src/mainboard/topstar/u931/devicetree.cb b/src/mainboard/topstar/u931/devicetree.cb new file mode 100644 index 0000000..388b62f --- /dev/null +++ b/src/mainboard/topstar/u931/devicetree.cb @@ -0,0 +1,228 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + register "eist_enable" = "1" + + # Set the Thermal Control Circuit (TCC) activaction value to 95C + # even though FSP integration guide says to set it to 100C for SKL-U + # (offset at 0), because when the TCC activates at 100C, the CPU + # will have already shut itself down from overheating protection. + register "tcc_offset" = "5" # TCC of 95C + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x380-0x383 & 0x80-0x8f + register "gen1_dec" = "0x00000381" + register "gen2_dec" = "0x000c0081" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Disable DPTF + register "dptf_enable" = "0" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "1" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "0" + register "SataPortsEnable[2]" = "1" + register "SataPortsDevSlp[0]" = "0" + register "SataPortsDevSlp[2]" = "0" + register "SataSpeedLimit" = "2" + register "EnableAzalia" = "1" + register "DspEnable" = "0" + register "IoBufferOwnership" = "0" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "3" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "0" + + # EC/KBC requires continuous mode + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-----------+-----------+-------------+----------+ + #| Domain/Setting | SA | IA | GT Unsliced | GT | + #+----------------+-----------+-----------+-------------+----------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AC LoadLine | 15 mOhm | 5.7 mOhm | 5.2 mOhm | 5.2 mOhm | + #| DC LoadLine | 14.3 mOhm | 4.83 mOhm | 4.2 mOhm | 4.2 mOhm | + #+----------------+-----------+-----------+-------------+----------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(7), + .voltage_limit = 1520, + .ac_loadline = 1500, + .dc_loadline = 1430, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + .ac_loadline = 570, + .dc_loadline = 483, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + .ac_loadline = 520, + .dc_loadline = 420, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + .ac_loadline = 520, + .dc_loadline = 420, + }" + + # Enable Root Ports 5 and 9 + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[8]" = "1" + # Enable CLKREQ# for RP9 + register "PcieRpClkReqSupport[8]" = "0" + # ClkReq for NVMe - Bruteforced (no other value works) + register "PcieRpClkReqNumber[8]" = "2" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[3]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) + register "usb2_ports[4]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[7]" = "USB2_PORT_FLEX(OC_SKIP)" # SD + + # OC0 should be for Type-C but it seems to not have been wired, according to + # the available schematics, even though it is labeled as USB_OC_TYPEC. + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + + # PL2 override 25W + register "tdp_pl2_override" = "25" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1f.0 on end # LPC Interface + device pci 1f.1 off end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 off end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/topstar/u931/dsdt.asl b/src/mainboard/topstar/u931/dsdt.asl new file mode 100644 index 0000000..a29589d --- /dev/null +++ b/src/mainboard/topstar/u931/dsdt.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/skylake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/skylake/acpi/globalnvs.asl> + + // CPU + #include <cpu/intel/common/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + + } + + // Chipset specific sleep states + #include <soc/intel/skylake/acpi/sleepstates.asl> + + // Mainboard specific +// #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/topstar/u931/gpio.h b/src/mainboard/topstar/u931/gpio.h new file mode 100644 index 0000000..8337185 --- /dev/null +++ b/src/mainboard/topstar/u931/gpio.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +#ifndef __ACPI__ + +static const struct pad_config gpio_table[] = { +}; + +static const struct pad_config early_gpio_table[] = { +}; + +#endif + +#endif diff --git a/src/mainboard/topstar/u931/pei_data.c b/src/mainboard/topstar/u931/pei_data.c new file mode 100644 index 0000000..0be917d --- /dev/null +++ b/src/mainboard/topstar/u931/pei_data.c @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * Copyright (C) 2017 Purism SPC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include "pei_data.h" + +void mainboard_fill_dq_map_data(void *dq_map_ptr) +{ + /* DQ byte map */ + const u8 dq_map[2][12] = { + { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, + 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 }, + { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, + 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } }; + memcpy(dq_map_ptr, dq_map, sizeof(dq_map)); +} + +void mainboard_fill_dqs_map_data(void *dqs_map_ptr) +{ + /* DQS CPU<>DRAM map */ + const u8 dqs_map[2][8] = { + { 0, 1, 3, 2, 4, 5, 6, 7 }, + { 1, 0, 4, 5, 2, 3, 6, 7 } }; + memcpy(dqs_map_ptr, dqs_map, sizeof(dqs_map)); +} + +void mainboard_fill_rcomp_res_data(void *rcomp_ptr) +{ + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 121, 81, 100 }; + memcpy(rcomp_ptr, RcompResistor, + sizeof(RcompResistor)); +} + +void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) +{ + /* Rcomp target */ + const u16 RcompTarget[5] = { 100, 40, 20, 20, 26 }; + memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget)); +} + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + mainboard_fill_dq_map_data(&pei_data->dq_map); + mainboard_fill_dqs_map_data(&pei_data->dqs_map); + mainboard_fill_rcomp_res_data(&pei_data->RcompResistor); + mainboard_fill_rcomp_strength_data(&pei_data->RcompTarget); +} diff --git a/src/mainboard/topstar/u931/pei_data.h b/src/mainboard/topstar/u931/pei_data.h new file mode 100644 index 0000000..320d980 --- /dev/null +++ b/src/mainboard/topstar/u931/pei_data.h @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Purism SPC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MAINBOARD_PEI_DATA_H_ +#define _MAINBOARD_PEI_DATA_H_ + +void mainboard_fill_dq_map_data(void *dq_map_ptr); +void mainboard_fill_dqs_map_data(void *dqs_map_ptr); +void mainboard_fill_rcomp_res_data(void *rcomp_ptr); +void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr); + +#endif diff --git a/src/mainboard/topstar/u931/ramstage.c b/src/mainboard/topstar/u931/ramstage.c new file mode 100644 index 0000000..0d973e7 --- /dev/null +++ b/src/mainboard/topstar/u931/ramstage.c @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Intel Corporation + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/ramstage.h> +#include "gpio.h" + +void mainboard_silicon_init_params(FSP_SIL_UPD *params) +{ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/src/mainboard/topstar/u931/romstage.c b/src/mainboard/topstar/u931/romstage.c new file mode 100644 index 0000000..48db885 --- /dev/null +++ b/src/mainboard/topstar/u931/romstage.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * Copyright (C) 2017 Purism SPC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <string.h> +#include <assert.h> +#include <soc/romstage.h> +#include <spd_bin.h> +#include "pei_data.h" + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *mem_cfg; + struct spd_block blk = { + .addr_map = { 0x50 }, + }; + + mem_cfg = &mupd->FspmConfig; + + get_spd_smbus(&blk); + dump_spd_info(&blk); + assert(blk.spd_array[0][0] != 0); + + mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0); + mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0); + mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); + mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); + + mem_cfg->DqPinsInterleaved = TRUE; + mem_cfg->MemorySpdDataLen = blk.len; + mem_cfg->MemorySpdPtr00 = (uintptr_t) blk.spd_array[0]; +}
-
Felix Singer (Code Review)