Change in coreboot[master]: mainboard/dell: Add Latitude E7440
Pablo Stebler has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/46540 ) Change subject: mainboard/dell: Add Latitude E7440 ...................................................................... mainboard/dell: Add Latitude E7440 Based on autoport output. Untested for now. Signed-off-by: Pablo Stebler <pablo@stebler.xyz> Change-Id: I9459d8dac9552529fc90633eaadd89f5118b237e --- M src/mainboard/dell/latitude_e7x40/Kconfig M src/mainboard/dell/latitude_e7x40/Kconfig.name A src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/board_info.txt A src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/gpio.c A src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/hda_verb.c A src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/overridetree.cb 6 files changed, 152 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/40/46540/1 diff --git a/src/mainboard/dell/latitude_e7x40/Kconfig b/src/mainboard/dell/latitude_e7x40/Kconfig index 05ed643..9b9bae7 100644 --- a/src/mainboard/dell/latitude_e7x40/Kconfig +++ b/src/mainboard/dell/latitude_e7x40/Kconfig @@ -23,10 +23,12 @@ config VARIANT_DIR string default "latitude_e7240" if BOARD_DELL_LATITUDE_E7240 + default "latitude_e7440" if BOARD_DELL_LATITUDE_E7440 config MAINBOARD_PART_NUMBER string default "Latitude E7240" if BOARD_DELL_LATITUDE_E7240 + default "Latitude E7440" if BOARD_DELL_LATITUDE_E7440 config VGA_BIOS_FILE string diff --git a/src/mainboard/dell/latitude_e7x40/Kconfig.name b/src/mainboard/dell/latitude_e7x40/Kconfig.name index 5eefdf7..4532758 100644 --- a/src/mainboard/dell/latitude_e7x40/Kconfig.name +++ b/src/mainboard/dell/latitude_e7x40/Kconfig.name @@ -4,3 +4,8 @@ bool "Latitude E7240" select BOARD_DELL_LATITUDE_E7x40 + +config BOARD_DELL_LATITUDE_E7440 + bool "Latitude E7440" + + select BOARD_DELL_LATITUDE_E7x40 diff --git a/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/board_info.txt b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/board_info.txt new file mode 100644 index 0000000..6d6a545 --- /dev/null +++ b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/board_info.txt @@ -0,0 +1 @@ +Board URL: https://www.dell.com/support/home/en-us/product-support/product/latitude-e74... diff --git a/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/gpio.c b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/gpio.c new file mode 100644 index 0000000..89531a3 --- /dev/null +++ b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/gpio.c @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <southbridge/intel/lynxpoint/lp_gpio.h> + +const struct pch_lp_gpio_map mainboard_gpio_map[] = { + [0] = LP_GPIO_OUT_LOW, + [1] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [2] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [3] = LP_GPIO_OUT_LOW, + [4] = LP_GPIO_NATIVE, + [5] = LP_GPIO_NATIVE, + [6] = LP_GPIO_NATIVE, + [7] = LP_GPIO_NATIVE, + [8] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [9] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [10] = LP_GPIO_OUT_LOW, + [11] = LP_GPIO_NATIVE, + [12] = LP_GPIO_NATIVE, + [13] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [14] = LP_GPIO_OUT_LOW, + [15] = LP_GPIO_OUT_LOW, + [16] = LP_GPIO_OUT_HIGH, + [17] = LP_GPIO_OUT_LOW, + [18] = LP_GPIO_NATIVE, + [19] = LP_GPIO_NATIVE, + [20] = LP_GPIO_NATIVE, + [21] = LP_GPIO_NATIVE, + [22] = LP_GPIO_NATIVE, + [23] = LP_GPIO_NATIVE, + [24] = LP_GPIO_OUT_LOW, + [25] = LP_GPIO_OUT_LOW, + [26] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT }, + [27] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [28] = LP_GPIO_OUT_LOW, + [29] = LP_GPIO_NATIVE, + [30] = LP_GPIO_NATIVE, + [31] = LP_GPIO_NATIVE, + [32] = LP_GPIO_NATIVE, + [33] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [34] = LP_GPIO_OUT_HIGH, + [35] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [36] = LP_GPIO_OUT_LOW, + [37] = LP_GPIO_NATIVE, + [38] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [39] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [40] = LP_GPIO_NATIVE, + [41] = LP_GPIO_NATIVE, + [42] = LP_GPIO_NATIVE, + [43] = LP_GPIO_NATIVE, + [44] = LP_GPIO_OUT_LOW, + [45] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL, + .route = GPIO_ROUTE_SMI, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [46] = LP_GPIO_OUT_LOW, + [47] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [48] = LP_GPIO_OUT_LOW, + [49] = LP_GPIO_OUT_LOW, + [50] = LP_GPIO_OUT_HIGH, + [51] = LP_GPIO_OUT_LOW, + [52] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [53] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [54] = LP_GPIO_OUT_LOW, + [55] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [56] = LP_GPIO_OUT_HIGH, + [57] = LP_GPIO_OUT_HIGH, + [58] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT }, + [59] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [60] = LP_GPIO_OUT_LOW, + [61] = LP_GPIO_NATIVE, + [62] = LP_GPIO_NATIVE, + [63] = LP_GPIO_NATIVE, + [64] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [65] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [66] = LP_GPIO_OUT_LOW, + [67] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [68] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [69] = LP_GPIO_OUT_HIGH, + [70] = LP_GPIO_OUT_LOW, + [71] = LP_GPIO_NATIVE, + [72] = LP_GPIO_NATIVE, + [73] = LP_GPIO_OUT_LOW, + [74] = LP_GPIO_NATIVE, + [75] = LP_GPIO_NATIVE, + [76] = LP_GPIO_OUT_HIGH, + [77] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [78] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, + .route = GPIO_ROUTE_SMI }, + [79] = LP_GPIO_NATIVE, + [80] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [81] = LP_GPIO_NATIVE, + [82] = LP_GPIO_NATIVE, + [83] = LP_GPIO_OUT_HIGH, + [84] = LP_GPIO_OUT_HIGH, + [85] = LP_GPIO_OUT_HIGH, + [86] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [87] = LP_GPIO_OUT_LOW, + [88] = LP_GPIO_OUT_LOW, + [89] = LP_GPIO_OUT_HIGH, + [90] = LP_GPIO_OUT_HIGH, + [91] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [92] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [93] = LP_GPIO_OUT_LOW, + [94] = LP_GPIO_OUT_LOW, + LP_GPIO_END +}; diff --git a/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/hda_verb.c b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/hda_verb.c new file mode 100644 index 0000000..e358006 --- /dev/null +++ b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/hda_verb.c @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10ec0292, /* Codec Vendor / Device ID: Realtek */ + 0x102805cb, /* Subsystem ID */ + 12, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x102805cb), + AZALIA_PIN_CFG(0, 0x12, 0x90a60140), + AZALIA_PIN_CFG(0, 0x13, 0x411111f0), + AZALIA_PIN_CFG(0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0, 0x15, 0x0221401f), + AZALIA_PIN_CFG(0, 0x16, 0x01014020), + AZALIA_PIN_CFG(0, 0x18, 0x411111f0), + AZALIA_PIN_CFG(0, 0x19, 0x01a19030), + AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x40700001), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/overridetree.cb b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/overridetree.cb new file mode 100644 index 0000000..cc31dc8 --- /dev/null +++ b/src/mainboard/dell/latitude_e7x40/variants/latitude_e7440/overridetree.cb @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip northbridge/intel/haswell + device domain 0x0 on + subsystemid 0x1028 0x05cb inherit + end +end -- To view, visit https://review.coreboot.org/c/coreboot/+/46540 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9459d8dac9552529fc90633eaadd89f5118b237e Gerrit-Change-Number: 46540 Gerrit-PatchSet: 1 Gerrit-Owner: Pablo Stebler <pablo@stebler.xyz> Gerrit-MessageType: newchange
Attention is currently required from: Pablo Stebler. Paul Menzel has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/46540 ) Change subject: mainboard/dell: Add Latitude E7440 ...................................................................... Patch Set 2: (1 comment) Patchset: PS2: Any update on this? Where you able to test the port? -- To view, visit https://review.coreboot.org/c/coreboot/+/46540 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9459d8dac9552529fc90633eaadd89f5118b237e Gerrit-Change-Number: 46540 Gerrit-PatchSet: 2 Gerrit-Owner: Pablo Stebler <pablo@stebler.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-Attention: Pablo Stebler <pablo@stebler.xyz> Gerrit-Comment-Date: Wed, 20 Apr 2022 06:03:26 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment
Attention is currently required from: Pablo Stebler. Paul Menzel has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/46540 ) Change subject: mainboard/dell: Add Latitude E7440 ...................................................................... Patch Set 2: (1 comment) Patchset: PS2: I have access to a Dell Latitude E7450 (with a broken LCD display, that means, it’s leaking). -- To view, visit https://review.coreboot.org/c/coreboot/+/46540 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9459d8dac9552529fc90633eaadd89f5118b237e Gerrit-Change-Number: 46540 Gerrit-PatchSet: 2 Gerrit-Owner: Pablo Stebler <pablo@stebler.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-Attention: Pablo Stebler <pablo@stebler.xyz> Gerrit-Comment-Date: Tue, 21 Feb 2023 15:39:33 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment
Martin L Roth has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/46540?usp=email ) Change subject: mainboard/dell: Add Latitude E7440 ...................................................................... Abandoned No updates from the original author in 2 years. -- To view, visit https://review.coreboot.org/c/coreboot/+/46540?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I9459d8dac9552529fc90633eaadd89f5118b237e Gerrit-Change-Number: 46540 Gerrit-PatchSet: 2 Gerrit-Owner: Pablo Stebler <pablo@stebler.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-CC: Stefan Reinauer <stefan.reinauer@coreboot.org> Gerrit-MessageType: abandon
Felix Singer has restored this change. ( https://review.coreboot.org/c/coreboot/+/46540?usp=email ) Change subject: mainboard/dell: Add Latitude E7440 ...................................................................... Restored -- To view, visit https://review.coreboot.org/c/coreboot/+/46540?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: restore Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I9459d8dac9552529fc90633eaadd89f5118b237e Gerrit-Change-Number: 46540 Gerrit-PatchSet: 2 Gerrit-Owner: Pablo Stebler <pablo@stebler.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-CC: Stefan Reinauer <stefan.reinauer@coreboot.org>
Felix Singer has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/46540?usp=email ) Change subject: mainboard/dell: Add Latitude E7440 ...................................................................... Abandoned -- To view, visit https://review.coreboot.org/c/coreboot/+/46540?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: abandon Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I9459d8dac9552529fc90633eaadd89f5118b237e Gerrit-Change-Number: 46540 Gerrit-PatchSet: 2 Gerrit-Owner: Pablo Stebler <pablo@stebler.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org> Gerrit-CC: Paul Menzel <paulepanter@mailbox.org> Gerrit-CC: Stefan Reinauer <stefan.reinauer@coreboot.org>
participants (4)
-
Felix Singer (Code Review) -
Martin L Roth (Code Review)
-
Pablo Stebler (Code Review)
-
Paul Menzel (Code Review)