Change in coreboot[master]: mb/siemens/mc_apl2: Switch I2C bus for RX6110SA

[Mario Scheithauer (Code Review)]

Mario Scheithauer has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/50391 )

Change subject: mb/siemens/mc_apl2: Switch I2C bus for RX6110SA
......................................................................

mb/siemens/mc_apl2: Switch I2C bus for RX6110SA

With a new HW revision of this board, the connection of the external RTC
RX6110SA was changed from I2C bus 0 to I2C bus 3.

Change-Id: I10dd44949973ea490b3c7e4ad83d56ce2e566adf
Signed-off-by: Mario Scheithauer 
---
M src/mainboard/siemens/mc_apl1/variants/mc_apl2/devicetree.cb
1 file changed, 4 insertions(+), 4 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/91/50391/1

diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl2/devicetree.cb b/src/mainboard/siemens/mc_apl1/variants/mc_apl2/devicetree.cb
index 047d9b1..bc70674 100644
--- a/src/mainboard/siemens/mc_apl1/variants/mc_apl2/devicetree.cb
+++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl2/devicetree.cb
@@ -81,7 +81,10 @@
    	end
    	device pci 15.0 on  end	# - XHCI
    	device pci 15.1 off end	# - XDCI
-		device pci 16.0 on	# - I2C 0
+		device pci 16.0 on  end	# - I2C 0
+		device pci 16.1 on  end	# - I2C 1
+		device pci 16.2 on  end	# - I2C 2
+		device pci 16.3 on	# - I2C 3
    		# Enable external RTC chip
    		chip drivers/i2c/rx6110sa
    			register "pmon_sampling" = "PMON_SAMPL_256_MS"
@@ -96,9 +99,6 @@
    			device i2c 0x32 on end	# RTC RX6110 SA
    		end
    	end
-		device pci 16.1 on  end	# - I2C 1
-		device pci 16.2 on  end	# - I2C 2
-		device pci 16.3 on  end	# - I2C 3
    	device pci 17.0 on  end	# - I2C 4
    	device pci 17.1 on  end	# - I2C 5
    	device pci 17.2 on  end	# - I2C 6