New patch to review for coreboot: 126baa8 AMD K8 fam10: Remove some excessive preprocessor use
Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8346
-gerrit
commit 126baa857e06e72ec470de95e8e8c4ab51da2d4a Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Mon Feb 2 20:07:58 2015 +0200
AMD K8 fam10: Remove some excessive preprocessor use
Change-Id: Iee51c51b662d1f5e3d918d1e5b961f06c6b99df6 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/northbridge/amd/amdfam10/northbridge.c | 34 ++++++++++------------------- src/northbridge/amd/amdk8/incoherent_ht.c | 27 +++++++++-------------- src/northbridge/amd/amdk8/northbridge.c | 35 ++++++++++++------------------ 3 files changed, 36 insertions(+), 60 deletions(-)
diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 84f2553..ce97f62 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -288,37 +288,27 @@ static unsigned amdfam10_scan_chains(device_t dev, unsigned max) unsigned nodeid; struct bus *link; unsigned sblink = sysconf.sblk; - unsigned offset_unitid = 0;
nodeid = amdfam10_nodeid(dev);
-// Put sb chain in bus 0 -#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 - if(nodeid==0) { - #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - offset_unitid = 1; - #endif - for (link = dev->link_list; link; link = link->next) - if (link->link_num == sblink) - max = amdfam10_scan_chain(dev, nodeid, link, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 + /* Do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 */ + for (link = dev->link_list; link; link = link->next) { + unsigned offset_unitid = (CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20); + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && (nodeid == 0) && (link->link_num == sblink)) + max = amdfam10_scan_chain(dev, nodeid, link, link->link_num, sblink, max, offset_unitid); } -#endif
#if CONFIG_PCI_BUS_SEGN_BITS max = check_segn(dev, max, sysconf.nodes, &sysconf); #endif
- for(link = dev->link_list; link; link = link->next) { -#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 - if( (nodeid == 0) && (sblink == link->link_num) ) continue; //already done -#endif - offset_unitid = 0; - #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - if((nodeid == 0) && (sblink == link->link_num)) - #endif - offset_unitid = 1; - #endif + for (link = dev->link_list; link; link = link->next) { + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && (nodeid == 0) && (link->link_num == sblink)) + continue; + + unsigned offset_unitid = (CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20); + offset_unitid = offset_unitid && + (((nodeid == 0) && (sblink == link->link_num)) || !CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY);
max = amdfam10_scan_chain(dev, nodeid, link, link->link_num, sblink, max, offset_unitid); } diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index 3c6cf33..40589c4 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -532,19 +532,13 @@ static int optimize_link_read_pointers_chain(uint8_t ht_c_num)
reset_needed = 0;
+ /* First one is SB HT chain. */ for (i = 0; i < ht_c_num; i++) { uint32_t reg; uint8_t nodeid, linkn; uint8_t busn; uint8_t val; - unsigned devn = 1; - - #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - if(i==0) // to check if it is sb ht chain - #endif - devn = CONFIG_HT_CHAIN_UNITID_BASE; - #endif + unsigned devn;
reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
@@ -552,6 +546,11 @@ static int optimize_link_read_pointers_chain(uint8_t ht_c_num) linkn = ((reg & 0xf00)>>8); // link n busn = (reg & 0xff0000)>>16; //busn
+ unsigned offset_unitid = (CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20); + offset_unitid = offset_unitid && (!CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY || (i == 0)); + + devn = offset_unitid ? CONFIG_HT_CHAIN_UNITID_BASE : 1; + reg = pci_read_config32( PCI_DEV(busn, devn, 0), PCI_VENDOR_ID); // ? the chain dev maybe offseted if ( (reg & 0xffff) == PCI_VENDOR_ID_AMD) { val = 0x25; @@ -649,14 +648,13 @@ static int ht_setup_chains(uint8_t ht_c_num) sysinfo->link_pair_num = 0; #endif
- // first one is SB Chain + /* First one is SB HT chain. */ for (i = 0; i < ht_c_num; i++) { uint32_t reg; uint8_t devpos; unsigned regpos; uint32_t dword; uint8_t busn; - unsigned offset_unitid = 0;
reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
@@ -670,13 +668,8 @@ static int ht_setup_chains(uint8_t ht_c_num) dword |= (reg & 0xffff0000)>>8; pci_write_config32( PCI_DEV(0, devpos,0), regpos , dword);
- - #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - if(i==0) // to check if it is sb ht chain - #endif - offset_unitid = 1; - #endif + unsigned offset_unitid = (CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20); + offset_unitid = offset_unitid && (!CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY || (i == 0));
/* Make certain the HT bus is not enumerated */ ht_collapse_previous_enumeration(busn, offset_unitid); diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 081ec6d..ea7bdc0 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -237,33 +237,26 @@ static unsigned amdk8_scan_chains(device_t dev, unsigned max) unsigned nodeid; struct bus *link; unsigned sblink = 0; - unsigned offset_unitid = 0;
nodeid = amdk8_nodeid(dev); - - if(nodeid==0) { + if (nodeid == 0) sblink = (pci_read_config32(dev, 0x64)>>8) & 3; -#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 - #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - offset_unitid = 1; - #endif - for (link = dev->link_list; link; link = link->next) - if (link->link_num == sblink) - max = amdk8_scan_chain(dev, nodeid, link, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 -#endif + + // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 + for (link = dev->link_list; link; link = link->next) { + unsigned offset_unitid = (CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20); + + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && (nodeid == 0) && (link->link_num == sblink)) + max = amdk8_scan_chain(dev, nodeid, link, link->link_num, sblink, max, offset_unitid); }
for (link = dev->link_list; link; link = link->next) { -#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 - if( (nodeid == 0) && (sblink == link->link_num) ) continue; //already done -#endif - offset_unitid = 0; - #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - if((nodeid == 0) && (sblink == link->link_num)) - #endif - offset_unitid = 1; - #endif + if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && (nodeid == 0) && (link->link_num == sblink)) + continue; + + unsigned offset_unitid = (CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20); + offset_unitid = offset_unitid && + (((nodeid == 0) && (sblink == link->link_num)) || !CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY);
max = amdk8_scan_chain(dev, nodeid, link, link->link_num, sblink, max, offset_unitid); }
-
Kyösti Mälkki