Change in coreboot[master]: src/mainboard/herobrine: Add support QUP FW for I2C and SPI

[Ravi kumar (Code Review)]

Ravi kumar has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/59556 )

Change subject: src/mainboard/herobrine: Add support QUP FW for I2C and SPI
......................................................................

src/mainboard/herobrine: Add support QUP FW for I2C and SPI

Loading QUP FW for hoglin and senor configuration for I2C, SPI and UART.

BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.

Signed-off-by: Ravi Kumar Bokka 
Change-Id: I08b1d38fef84ef341809a901e2287f70ca5a0314

src/mainboard/herobrine: Add support for senor QUP FW for I2C and SPI

Loading QUP FW for senor configuration for I2C, SPI and UART.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.

Signed-off-by: Ravi Kumar Bokka 
Change-Id: I6fdd09bb437547e6d12eb60c4b2917d2a3074618
---
M src/mainboard/google/herobrine/mainboard.c
1 file changed, 2 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/59556/1

diff --git a/src/mainboard/google/herobrine/mainboard.c b/src/mainboard/google/herobrine/mainboard.c
index 4fedae1..bc9f4e5 100644
--- a/src/mainboard/google/herobrine/mainboard.c
+++ b/src/mainboard/google/herobrine/mainboard.c
@@ -80,7 +80,8 @@
    	qupv3_se_fw_load_and_init(QUPV3_0_SE2, SE_PROTOCOL_I2C, MIXED);
    	/* Fingerprint SPI */
    	qupv3_se_fw_load_and_init(QUPV3_1_SE3, SE_PROTOCOL_SPI, MIXED);
-	} else if (CONFIG(BOARD_GOOGLE_PIGLIN) || CONFIG(BOARD_GOOGLE_HOGLIN)) {
+	} else if (CONFIG(BOARD_GOOGLE_SENOR) || CONFIG(BOARD_GOOGLE_PIGLIN) ||
+						CONFIG(BOARD_GOOGLE_HOGLIN)) {
    	/* APPS I2C */
    	qupv3_se_fw_load_and_init(QUPV3_0_SE1, SE_PROTOCOL_I2C, GSI);
    	/* ESIM SPI */