Change in coreboot[master]: soc/amd/picasso/pci_gpp: Switch to using acpigen_write_pci_GNB_PRT

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/53935 )

Change subject: soc/amd/picasso/pci_gpp: Switch to using acpigen_write_pci_GNB_PRT
......................................................................

soc/amd/picasso/pci_gpp: Switch to using acpigen_write_pci_GNB_PRT

We can now delete the picasso specific version.

BUG=b:184766519
TEST=Build zork and verify SSDT has not changed

Signed-off-by: Raul E Rangel 
Change-Id: Ic79014e83c9ff63cc7a6757b16764ae23b36984f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53935
Reviewed-by: Felix Held 
Tested-by: build bot (Jenkins) 
---
M src/soc/amd/picasso/pcie_gpp.c
1 file changed, 1 insertion(+), 63 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Felix Held: Looks good to me, approved

diff --git a/src/soc/amd/picasso/pcie_gpp.c b/src/soc/amd/picasso/pcie_gpp.c
index 15174f6..eabaa77 100644
--- a/src/soc/amd/picasso/pcie_gpp.c
+++ b/src/soc/amd/picasso/pcie_gpp.c
@@ -60,68 +60,6 @@
    return NULL;
 }

-static void acpigen_write_PRT(const struct device *dev)
-{
-	char link_template[] = "\_SB.INTX";
-	unsigned int irq_index;
-
-	const struct pci_routing_info *pci_routing = get_pci_routing_info(dev->path.pci.devfn);
-	if (!pci_routing) {
-		printk(BIOS_ERR, "PCI routing table not found for %s\n", dev_path(dev));
-		return;
-	}
-
-	acpigen_write_method("_PRT", 0);
-
-	/* If (PICM) */
-	acpigen_write_if();
-	acpigen_emit_namestring("PICM");
-
-	/* Return (Package{...}) */
-	acpigen_emit_byte(RETURN_OP);
-
-	acpigen_write_package(4); /* Package - APIC Routing */
-	for (unsigned int i = 0; i < 4; ++i) {
-		irq_index = pci_calculate_irq(pci_routing, i);
-
-		acpigen_write_package(4);
-		/* There is only one device attached to the bridge */
-		acpigen_write_dword(0x0000FFFF);
-		acpigen_write_byte(i);
-		acpigen_write_byte(0); /* Source: GSI  */
-		/* GNB IO-APIC is located after the FCH IO-APIC */
-		acpigen_write_dword(IO_APIC_INTERRUPTS + irq_index);
-		acpigen_pop_len();
-	}
-	acpigen_pop_len(); /* Package - APIC Routing */
-
-	/* Else */
-	acpigen_write_else();
-
-	/* Return (Package{...}) */
-	acpigen_emit_byte(RETURN_OP);
-
-	acpigen_write_package(4); /* Package - PIC Routing */
-	for (unsigned int i = 0; i < 4; ++i) {
-		irq_index = pci_calculate_irq(pci_routing, i);
-
-		link_template[8] = 'A' + (irq_index % 8);
-
-		acpigen_write_package(4);
-		/* There is only one device attached to the bridge */
-		acpigen_write_dword(0x0000FFFF);
-		acpigen_write_byte(i);
-		acpigen_emit_namestring(link_template);
-		acpigen_write_dword(0);
-		acpigen_pop_len();
-	}
-	acpigen_pop_len(); /* Package - PIC Routing */
-
-	acpigen_pop_len(); /* End Else */
-
-	acpigen_pop_len(); /* Method */
-}
-
 /*
  * This function writes a PCI device with _ADR, _STA, and _PRT objects:
  * Example:
@@ -230,7 +168,7 @@
    acpigen_write_ADR_pci_device(dev);
    acpigen_write_STA(acpi_device_status(dev));

-	acpigen_write_PRT(dev);
+	acpigen_write_pci_GNB_PRT(dev);

acpigen_pop_len(); /* Device */
    acpigen_pop_len(); /* Scope */