Change in coreboot[master]: mb/google/volteer/var/voema: Update gpio and devicetree settings - coreboot-gerrit

17 Nov 2020

David Wu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/47667 )
Change subject: mb/google/volteer/var/voema: Update gpio and devicetree settings
......................................................................
mb/google/volteer/var/voema: Update gpio and devicetree settings
Based on latest schematic and gpio table of voema, update gpio and devicetree
settings for voema Proto.
BUG=b:169356808
TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu david_wu@quanta.corp-partner.google.com
Change-Id: I719a9948ed0d60e1de5368e096ff60c2345803b0
---
M src/mainboard/google/volteer/variants/voema/Makefile.inc
A src/mainboard/google/volteer/variants/voema/gpio.c
M src/mainboard/google/volteer/variants/voema/include/variant/gpio.h
M src/mainboard/google/volteer/variants/voema/overridetree.cb
4 files changed, 433 insertions(+), 7 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/67/47667/1

diff --git a/src/mainboard/google/volteer/variants/voema/Makefile.inc b/src/mainboard/google/volteer/variants/voema/Makefile.inc
index 9064208..b0bfc56 100644
--- a/src/mainboard/google/volteer/variants/voema/Makefile.inc
+++ b/src/mainboard/google/volteer/variants/voema/Makefile.inc
@@ -1,3 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
+bootblock-y += gpio.c
+
 romstage-y += memory.c
+
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/volteer/variants/voema/gpio.c b/src/mainboard/google/volteer/variants/voema/gpio.c
new file mode 100644
index 0000000..2a9299b
--- /dev/null
+++ b/src/mainboard/google/volteer/variants/voema/gpio.c
@@ -0,0 +1,224 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <variant/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+
+/* Pad configuration in ramstage */
+static const struct pad_config override_gpio_table[] = {
+	/* A7  : I2S2_SCLK ==> I2S1_SPKR_SCLK */
+	PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1),
+	/* A8  : I2S2_SFRM ==> I2S1_SPKR_SFRM */
+	PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
+	/* A9  : I2S2_TXD ==> I2S1_PCH_TX_SPKR_RX */
+	PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
+	/* A10 : I2S2_RXD ==> I2S1_PCH_RX_SPKR */
+	PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
+	/* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */
+	PAD_CFG_GPO(GPP_A13, 1, DEEP),
+	/* A14 : USB_OC1# ==> NC */
+	PAD_NC(GPP_A14, NONE),
+	/* A16 : USB_OC3# ==> USB_C0_OC_ODL */
+	PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
+	/* A18 : DDSP_HPDB ==> HDMI_HPD */
+	PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
+	/* A21 : DDPC_CTRCLK ==> EN_FP_PWR */
+	PAD_CFG_GPO(GPP_A21, 1, DEEP),
+	/* A22 : DDPC_CTRLDATA ==> EN_HDMI_PWR */
+	PAD_CFG_GPO(GPP_A22, 1, DEEP),
+
+	/* B2  : VRALERT# ==> EN_PP3300_SSD */
+	PAD_CFG_GPO(GPP_B2, 1, DEEP),
+	/* B7  : ISH_12C1_SDA ==> ISH_I2C1_SENSOR_SDA */
+	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
+	/* B8  : ISH_I2C1_SCL ==> ISH_I2C1_SENSOR_SCL */
+	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1),
+	/* B9  : I2C5_SDA ==> PCH_I2C5_TRACKPAD_SDA */
+	PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
+	/* B10 : I2C5_SCL ==> PCH_I2C5_TRACKPAD_SCL */
+	PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
+	/* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */
+	PAD_CFG_NF(GPP_B18, DN_20K, DEEP, NF1),
+	/* B19 : GSPI1_CS0# ==> PCH_GSPI1_FPMCU_CS_L */
+	PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1),
+	/* B20 : GSPI1_CLK ==> PCH_GSPI1_FPMCU_CLK */
+	PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1),
+	/* B21 : GSPI1_MISO ==> PCH_GSPI1_FPMCU_MISO */
+	PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1),
+	/* B23 : SML1ALERT# ==> GPP_B23_STRAP # */
+	PAD_NC(GPP_B23, DN_20K),
+
+	/* C0  : SMBCLK ==> EN_PP3300_WLAN */
+	PAD_CFG_GPO(GPP_C0, 1, DEEP),
+	/* C2  : SMBALERT# ==> GPP_C2_STRAP */
+	PAD_NC(GPP_C2, DN_20K),
+	/* C5  : SML0ALERT# ==> USB_SMB_INT_L_BOOT_STRAP0 */
+	PAD_NC(GPP_C5, DN_20K),
+	/* C7  : SML1DATA ==> EN_USI_CHARGE */
+	PAD_CFG_GPO(GPP_C7, 1, DEEP),
+	/* C10 : UART0_RTS# ==> USI_RST_L */
+	PAD_CFG_GPO(GPP_C10, 1, DEEP),
+	/* C13 : UART1_TXD ==> PCH_FPMCU_BOOT1 */
+	PAD_CFG_GPO(GPP_C13, 0, DEEP),
+	/* C16 : I2C0_SDA ==> PCH_I2C0_1V8_AUDIO_SDA */
+	PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
+	/* C17 : I2C0_SCL ==> PCH_I2C0_1V8_AUDIO_SCL */
+	PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
+	/* C18 : I2C1_SDA ==> PCH_I2C1_TOUCH_USI_SDA */
+	PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
+	/* C19 : I2C1_SCL ==> PCH_I2C1_TOUCH_USI_SCL */
+	PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
+	/* C20 : UART2_RXD ==> FPMCU_INT_L */
+	PAD_CFG_GPI_INT(GPP_C20, NONE, PLTRST, LEVEL),
+	/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
+	PAD_CFG_GPO(GPP_C22, 0, DEEP),
+	/* C23 : UART2_CTS# ==> FPMCU_RST_ODL */
+	PAD_CFG_GPO(GPP_C23, 1, DEEP),
+
+	/* D0  : ISH_GP0 ==> ISH_IMU_INT_L */
+	PAD_CFG_GPI(GPP_D0, NONE, DEEP),
+	/* D1  : ISH_GP1 ==> ISH_ACCEL_INT_L */
+	PAD_CFG_GPI(GPP_D1, NONE, DEEP),
+	/* D2  : ISH_GP2 ==> ISH_LID_OPEN */
+	PAD_CFG_GPI(GPP_D2, NONE, DEEP),
+	/* D3  : ISH_GP3 ==> CAM_DET_L */
+	PAD_CFG_GPI(GPP_D3, NONE, DEEP),
+	/* D4  : IMGCLKOUT0 ==> CAM_RST_L */
+	PAD_CFG_GPO(GPP_D4, 0, PLTRST),
+	/* D10 : ISH_SPI_CLK ==> PCH_GSPI2_CVF_CLK_STRAP */
+	PAD_CFG_NF(GPP_D10, DN_20K, DEEP, NF7),
+	/* D12 : ISH_SPI_MOSI ==> PCH_GSPI2_CVF_MISO_STRAP */
+	PAD_CFG_NF(GPP_D12, DN_20K, DEEP, NF7),
+	/* D13 : ISH_UART0_RXD ==> UART_ISH_RX_DEBUG_TX */
+	PAD_CFG_NF(GPP_D13, NONE, DEEP, NF1),
+	/* D14 : ISH_UART0_TXD ==> UART_ISH_TX_DEBUG_RX */
+	PAD_CFG_NF(GPP_D14, NONE, DEEP, NF1),
+	/* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */
+	PAD_CFG_GPO(GPP_D16, 1, DEEP),
+	/* D17 : ISH_GP4 ==> CAM_SEN_EN */
+	PAD_CFG_GPO(GPP_D17, 0, DEEP),
+
+	/* E0  : SATAXPCIE0 ==> NC */
+	PAD_NC(GPP_E0, NONE),
+	/* E3  : CPU_GP0 ==> USI_REPORT_EN */
+	PAD_CFG_GPO(GPP_E3, 1, DEEP),
+	/* E7  : CPU_GP1 ==> USI_INT */
+	PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE),
+	/* E15 : ISH_GP6 ==> TRACKPAD_INT_ODL */
+	PAD_CFG_GPI_IRQ_WAKE(GPP_E15, NONE, DEEP, LEVEL, INVERT),
+	/* E18 : DDP1_CTRLCLK ==> NC */
+	PAD_NC(GPP_E18, NONE),
+	/* E19 : DDP1_CTRLDATA ==> USB0_C0_LSX_SOC_RX_STRAP */
+	PAD_CFG_NF(GPP_E19, DN_20K, DEEP, NF4),
+	/* E20 : DDP2_CTRLCLK ==> NC */
+	PAD_NC(GPP_E20, NONE),
+
+	/* F7  : GPPF7_STRAP */
+	PAD_NC(GPP_F7, DN_20K),
+	/* F11 : THC1_SPI2_CLK ==> NC */
+	PAD_NC(GPP_F11, NONE),
+	/* F12 : GSXDOUT ==> EN_PP3300_TRACKPAD */
+	PAD_CFG_GPO(GPP_F12, 1, DEEP),
+	/* F13 : GSXDOUT ==> WiFi_DISABLE_L */
+	PAD_CFG_GPO(GPP_F13, 1, DEEP),
+	/* F16 : GSXCLK ==> EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO(GPP_F16, 1, DEEP),
+	/* F17 : WWAN_RF_DISABLE_ODL ==> EC_IN_RW_OD */
+	PAD_CFG_GPI(GPP_F17, NONE, DEEP),
+	/* F18 : THC1_SPI2_INT# ==> EN_SPKR_PA */
+	PAD_CFG_GPO(GPP_F18, 1, DEEP),
+
+	/* H0  : GPPH0_BOOT_STRAP1 */
+	PAD_NC(GPP_H0, DN_20K),
+	/* H1  : GPPH1_BOOT_STRAP2 */
+	PAD_NC(GPP_H1, DN_20K),
+	/* H2  : GPPH2_BOOT_STRAP3 */
+	PAD_NC(GPP_H2, DN_20K),
+	/* H3  : SX_EXIT_HOLDOFF# ==> SD_PERST_L */
+	PAD_CFG_GPO(GPP_H3, 1, DEEP),
+	/* H10 : SRCCLKREQ4# ==> USB_C_MIX_RT_FORCE_PWR */
+	PAD_CFG_GPO(GPP_H10, 1, DEEP),
+	/* H13 : M2_SKT2_CFG1 # ==> SPKR_INT_L */
+	PAD_CFG_GPI(GPP_H13, NONE, DEEP),
+	/* H16 : DDPB_CTRLCLK ==> DDPB_HDMI_CTRLCLK */
+	PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1),
+	/* H17 : DDPB_CTRLDATA ==> DDPB_HDMI_CTRLDATA */
+	PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1),
+	/* H19 : TIME_SYNC0 ==> USER_PRES_FP_ODL_R */
+	PAD_CFG_GPI(GPP_H19, NONE, DEEP),
+
+	/* R0 : HDA_BCLK ==> I2S0_HP_SCLK */
+	PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),
+	/* R1 : HDA_SYNC ==> I2S0_HP_SFRM */
+	PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2),
+	/* R2 : HDA_SDO ==> I2S0_PCH_TX_HP_RX_STRAP */
+	PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2),
+	/* R3 : HDA_SDIO ==> I2S0_PCH_RX_HP_TX */
+	PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2),
+	/* R5 : HDA_SDI1 ==> HP_INT_L */
+	PAD_CFG_GPI_INT(GPP_R5, NONE, PLTRST, EDGE_BOTH),
+
+	/* S0 : SNDW0_CLK ==> SNDW0_HP_CLK */
+	PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1),
+	/* S1 : SNDW0_DATA ==> SNDW0_HP_DATA */
+	PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1),
+	/* S2 : SNDW1_CLK ==> SNDW1_SPKR_CLK */
+	PAD_CFG_NF(GPP_S2, NONE, DEEP, NF1),
+	/* S3 : SNDW1_DATA ==> SNDW1_SPKR_DATA */
+	PAD_CFG_NF(GPP_S3, NONE, DEEP, NF1),
+	/* S6 : SNDW3_CLK ==> DMIC_CLK0 */
+	PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2),
+	/* S7 : SNDW3_DATA ==> DMIC_DATA0 */
+	PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2),
+
+	/* GPD6: SLP_A# ==> NC */
+	PAD_NC(GPD6, NONE),
+	/* GPD9: SLP_WLAN# ==> SLP_WLAN_L */
+	PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(override_gpio_table);
+	return override_gpio_table;
+}
+
+/* Early pad configuration in bootblock */
+static const struct pad_config early_gpio_table[] = {
+	/* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */
+	PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
+	/* A17 : DDSP_HPDC ==> MEM_CH_SEL */
+	PAD_CFG_GPI(GPP_A17, NONE, DEEP),
+
+	/* B2  : VRALERT# ==> EN_PP3300_SSD */
+	PAD_CFG_GPO(GPP_B2, 1, DEEP),
+	/* B11 : PMCALERT# ==> PCH_WP_OD */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
+	/* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */
+	PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
+	/* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */
+	PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
+	/* B17 : GSPI0_MISO ==> PCH_GSPI0_H1_TPM_MISO */
+	PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
+	/* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */
+	PAD_CFG_NF(GPP_B18, DN_20K, DEEP, NF1),
+
+	/* C0  : SMBCLK ==> EN_PP3300_WLAN */
+	PAD_CFG_GPO(GPP_C0, 1, DEEP),
+	/* C21 : UART2_TXD ==> H1_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
+	/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
+	PAD_CFG_GPO(GPP_C22, 0, DEEP),
+
+	/* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */
+	PAD_CFG_GPO(GPP_D16, 1, DEEP),
+
+	/* E12 : SPI1_MISO_IO1 ==> PEN_ALERT_ODL */
+	PAD_CFG_GPI(GPP_E12, NONE, DEEP),
+};
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}
diff --git a/src/mainboard/google/volteer/variants/voema/include/variant/gpio.h b/src/mainboard/google/volteer/variants/voema/include/variant/gpio.h
index b5fa8c5..166c06c 100644
--- a/src/mainboard/google/volteer/variants/voema/include/variant/gpio.h
+++ b/src/mainboard/google/volteer/variants/voema/include/variant/gpio.h
@@ -5,11 +5,8 @@
#include <baseboard/gpio.h>
-/* Memory configuration board straps */
-/* Copied from baseboard and may need to change for the new variant. */
-#define GPIO_MEM_CONFIG_0	GPP_C12
-#define GPIO_MEM_CONFIG_1	GPP_C15
-#define GPIO_MEM_CONFIG_2	GPP_C14
-#define GPIO_MEM_CONFIG_3	GPP_D15
+#undef GPIO_EC_IN_RW
+/* EC in RW */
+#define GPIO_EC_IN_RW		GPP_F17
#endif
diff --git a/src/mainboard/google/volteer/variants/voema/overridetree.cb b/src/mainboard/google/volteer/variants/voema/overridetree.cb
index 32204c5..0f964b6 100644
--- a/src/mainboard/google/volteer/variants/voema/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/voema/overridetree.cb
@@ -1,6 +1,207 @@
 chip soc/intel/tigerlake
+	# BitMask where bits [3:0] are Controller 0 Channel [3:0] and
+	# bits [7:4] are Controller 1 Channel [3:0].
+	# Enable Command Mirroring for controller 0 channel 0 and 1,
+	# and controller 1 channel 0 and 1.
+	register "CmdMirror" = "0x00000033"
+
+	# Disable SRCCLKREQ1# and SRCCLKREQ3#
+	register "PcieClkSrcUsage[1]" = "PCIE_CLK_NOTUSED"
+	register "PcieClkSrcUsage[3]" = "PCIE_CLK_NOTUSED"
device domain 0 on
+		device ref i2c0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_R5)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on
+				end
+			end
+			chip drivers/i2c/max98373
+				register "vmon_slot_no" = "0"
+				register "imon_slot_no" = "1"
+				register "uid" = "0"
+				register "desc" = ""Right Speaker Amp""
+				register "name" = ""MAXR""
+				device i2c 31 on
+					probe AUDIO MAX98373_ALC5682I_I2S_UP4
+				end
+			end
+			chip drivers/i2c/max98373
+				register "vmon_slot_no" = "2"
+				register "imon_slot_no" = "3"
+				register "uid" = "1"
+				register "desc" = ""Left Speaker Amp""
+				register "name" = ""MAXL""
+				device i2c 32 on
+					probe AUDIO MAX98373_ALC5682I_I2S_UP4
+				end
+			end
+		end
+		device ref i2c1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 14 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN90FC""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 10 on end
+			end
+		end
+		device ref i2c2 on
+			chip drivers/i2c/sx9310
+				register "desc" = ""SAR0 Proximity Sensor""
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
+				register "speed" = "I2C_SPEED_FAST"
+				register "uid" = "0"
+				register "reg_prox_ctrl0" = "0x10"
+				register "reg_prox_ctrl1" = "0x00"
+				register "reg_prox_ctrl2" = "0x84"
+				register "reg_prox_ctrl3" = "0x0e"
+				register "reg_prox_ctrl4" = "0x07"
+				register "reg_prox_ctrl5" = "0xc6"
+				register "reg_prox_ctrl6" = "0x20"
+				register "reg_prox_ctrl7" = "0x0d"
+				register "reg_prox_ctrl8" = "0x8d"
+				register "reg_prox_ctrl9" = "0x43"
+				register "reg_prox_ctrl10" = "0x1f"
+				register "reg_prox_ctrl11" = "0x00"
+				register "reg_prox_ctrl12" = "0x00"
+				register "reg_prox_ctrl13" = "0x00"
+				register "reg_prox_ctrl14" = "0x00"
+				register "reg_prox_ctrl15" = "0x00"
+				register "reg_prox_ctrl16" = "0x00"
+				register "reg_prox_ctrl17" = "0x00"
+				register "reg_prox_ctrl18" = "0x00"
+				register "reg_prox_ctrl19" = "0x00"
+				register "reg_sar_ctrl0" = "0x50"
+				register "reg_sar_ctrl1" = "0x8a"
+				register "reg_sar_ctrl2" = "0x3c"
+				device i2c 28 on end
+			end
+		end
+		device ref i2c5 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+				register "wake" = "GPE0_DW2_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			# The pmc_mux chip driver is a placeholder for the
+			# PMC.MUX device in the ACPI hierarchy.
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "5"
+						register "usb3_port_number" = "1"
+						# SBU is fixed, HSL follows CC
+						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "3"
+						register "usb3_port_number" = "2"
+						# SBU is fixed, HSL follows CC
+						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
+						device generic 1 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref north_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 2)"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(2, 2)"
+						device ref tcss_usb3_port2 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+				end
+			end
+		end
+		device ref south_xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref usb2_port2 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device ref usb2_port3 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref usb2_port5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device ref usb3_port2 on
+							probe DB_USB USB3_ACTIVE
+						end
+					end
+				end
+			end
+		end
    end
-
 end
-- 
To view, visit https://review.coreboot.org/c/coreboot/+/47667
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: I719a9948ed0d60e1de5368e096ff60c2345803b0
Gerrit-Change-Number: 47667
Gerrit-PatchSet: 1
Gerrit-Owner: David Wu david_wu@quanta.corp-partner.google.com
Gerrit-MessageType: newchange



    