Change in coreboot[master]: mb/google/brya/var/redrix: Configure camera EEPROM power always on

[Arec Kao (Code Review)]

Attention is currently required from: Arec, Chen Wisley, Paul Menzel, Tim Wawrzynczak, Sugnan Prabhu S.
Arec Kao has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/64415 )

Change subject: mb/google/brya/var/redrix: Configure camera EEPROM power always on
......................................................................

Patch Set 2:

(3 comments)

Commit Message:

https://review.coreboot.org/c/coreboot/+/64415/comment/01adc07b_daeca613 
PS1, Line 9: Remove EEPROM power source interconnect with camera power on/off and keep it
           : always on.
> Please use 72 characters per line.

Done

https://review.coreboot.org/c/coreboot/+/64415/comment/4f502e0b_ca07b44f 
PS1, Line 11:
> Why?

It has a small probability to access EEPROM failed when perform a stress test on switching camera on/off.

File src/mainboard/google/brya/variants/redrix/overridetree.cb:

https://review.coreboot.org/c/coreboot/+/64415/comment/264e7caa_14774dd5 
PS1, Line 332: 5
> Have you instead just tried increasing the delay here after the NVM power was enabled?

No, It seems to me the delay is not a proper solution, even so, it still has little  chance to hit read/write EEPROM failed issue with NVM delay time.