Attention is currently required from: Dinesh Gehlot, Kapil Porwal, Subrata Banik, Tarun.
Eran Mitrani has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/79356?usp=email )
Change subject: mb/google/rex/variants/deku: Complete USB configuration ......................................................................
mb/google/rex/variants/deku: Complete USB configuration
+-------------+----------------+------------+ | USB 2.0 | Connector Type | OC Mapping | +-------------+----------------+------------+ | 1 | Type-C | OC_0 | +-------------+----------------+------------+ | 2 | Type-C | OC_0 | +-------------+----------------+------------+ | 3 | Type-C | OC-0 | +-------------+----------------+------------+ | 4 | Type-A | OC_3 | +-------------+----------------+------------+ | 5 | Type-C | OC_0 | +-------------+----------------+------------+ | 6 | Type-A | OC_3 | +-------------+----------------+------------+ | 7 | Type-A | OC_3 | +-------------+----------------+------------+ | 8 | Type-A | OC_3 | +-------------+----------------+------------+ | 9 | Type-A | OC_3 | +-------------+----------------+------------+ | 10 | BT | NA | +-------------+----------------+------------+
+---------------------+-------------------+------------+ | USB 3.2 Gen 2x1 | Connector Details | OC Mapping | +---------------------+-------------------+------------+ | 1 | Type-A | OC_3 | +---------------------+-------------------+------------+ | 2 | Type-A | OC_3 | +---------------------+-------------------+------------+
+------+-------------------+------------+ | TCPx | Connector Details | OC Mapping | +------+-------------------+------------+ | 1 | Type C port 0 | OC_0 | +------+-------------------+------------+ | 2 | Type C port 1 | OC_0 | +------+-------------------+------------+ | 3 | Type C port 2 | OC_0 | +------+-------------------+------------+ | 4 | Type C port 3 | OC_0 | +------+-------------------+------------+
BUG=b:305793886 TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Signed-off-by: Eran Mitrani mitrani@google.com Change-Id: I90d3d984af6d40efb4553cf5675617700161d2d7 --- M src/mainboard/google/rex/variants/deku/overridetree.cb 1 file changed, 191 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/79356/1
diff --git a/src/mainboard/google/rex/variants/deku/overridetree.cb b/src/mainboard/google/rex/variants/deku/overridetree.cb index 1163292..86a015cf 100644 --- a/src/mainboard/google/rex/variants/deku/overridetree.cb +++ b/src/mainboard/google/rex/variants/deku/overridetree.cb @@ -98,6 +98,158 @@ .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end # PCIE11 SSD card + device ref tbt_pcie_rp0 on end + device ref tbt_pcie_rp1 on end + device ref tbt_pcie_rp2 on end + device ref tbt_pcie_rp3 on end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, CENTER, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C2"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(3, 1))" + device ref tcss_usb3_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C3"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref tcss_usb3_port2 on end + end + end + end + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port0 as dfp[0].typec_port + device generic 0 on end + end + chip drivers/intel/usb4/retimer + register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port1 as dfp[1].typec_port + device generic 0 on end + end + end + device ref tcss_dma1 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port2 as dfp[0].typec_port + device generic 0 on end + end + chip drivers/intel/usb4/retimer + register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port3 as dfp[0].typec_port + device generic 0 on end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + # FIXME - location need to be corrected once we have the final design + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(FRONT, CENTER, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C2"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(3, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C3"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb2_port5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A0"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(5, 1))" + device ref usb2_port4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, CENTER, ACPI_PLD_GROUP(5, 2))" + device ref usb2_port7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A2"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, LEFT, ACPI_PLD_GROUP(5, 3))" + device ref usb2_port8 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A3"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(5, 4))" + device ref usb2_port9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A4"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(BACK, CENTER, ACPI_PLD_GROUP(5, 4))" + device ref usb2_port6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B01)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A0"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, RIGHT, ACPI_PLD_GROUP(5, 1))" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(FRONT, CENTER, ACPI_PLD_GROUP(5, 2))" + device ref usb3_port2 on end + end + end + end + end device ref i2c4 on chip drivers/i2c/tpm register "hid" = ""GOOG0005"" @@ -105,6 +257,44 @@ device i2c 50 on end end end + device ref soc_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + use conn2 as mux_conn[2] + use conn3 as mux_conn[3] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + #USB2_C0 + use usb2_port2 as usb2_port + use tcss_usb3_port0 as usb3_port + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + #USB2_C1 + use usb2_port3 as usb2_port + use tcss_usb3_port2 as usb3_port + device generic 1 alias conn1 on end + end + chip drivers/intel/pmc_mux/conn + #USB2_C2 + use usb2_port1 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 2 alias conn2 on end + end + chip drivers/intel/pmc_mux/conn + #USB2_C3 + use usb2_port5 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 3 alias conn3 on end + end + end + end + end end - end
-
Eran Mitrani (Code Review)