Attention is currently required from: Angel Pons, Riku Viitanen.
Nicholas Chin has posted comments on this change by Riku Viitanen. ( https://review.coreboot.org/c/coreboot/+/85772?usp=email )
Change subject: mb/asrock: Add Z77 Extreme4 ......................................................................
Patch Set 10:
(1 comment)
Commit Message:
https://review.coreboot.org/c/coreboot/+/85772/comment/58cce3d9_869b1557?usp... : PS10, Line 21: All internal SATA ports I see that this board uses an ASM1061 for two of the ports (I assume the SATA3_A0_A1 ports). What kernel driver and modules are in use for those in the output of `lspci -v`? I've seen reports of drives connected to those chips not being bootable but working in Linux, and some stating that they don't work at all. I have a theory that the chip is defaulting to IDE mode, and depending on the distro/kernel configuration, a compatible driver may or may not be loading. I currently have a patch that switches the chip to AHCI mode: CB:85816
-
Nicholas Chin (Code Review)