Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/80244?usp=email )
Change subject: mb/google/brox: Set display output type for eDP panel ......................................................................
mb/google/brox: Set display output type for eDP panel
Set the display type for the LCD panel configured via the gfx/generic driver. This will ensure the correct DID/device address are generated in the SSDT.
Change-Id: If63374329ed5eb4330517ca1bf2ba1ada24fa54a Signed-off-by: Matt DeVillier matt.devillier@gmail.com --- M src/mainboard/google/brox/variants/brox/overridetree.cb 1 file changed, 1 insertion(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/80244/1
diff --git a/src/mainboard/google/brox/variants/brox/overridetree.cb b/src/mainboard/google/brox/variants/brox/overridetree.cb index 82a836f..f390dca 100644 --- a/src/mainboard/google/brox/variants/brox/overridetree.cb +++ b/src/mainboard/google/brox/variants/brox/overridetree.cb @@ -30,6 +30,7 @@ register "device_count" = "6" # DDIA for eDP register "device[0].name" = ""LCD0"" ++ register "device[0].type" = "panel" # DDIB for HDMI # If HDMI is not enumerated in the kernel, then no GFX device should be added for DDIB register "device[1].name" = ""DD01""