Change in coreboot[master]: rx6110sa: Add possibility to use both I2C and SMBus for the RTC

[Mario Scheithauer (Code Review)]

Mario Scheithauer has posted comments on this change. ( https://review.coreboot.org/19978 )

Change subject: rx6110sa: Add possibility to use both I2C and SMBus for the RTC
......................................................................

Patch Set 1:

(2 comments)

https://review.coreboot.org/#/c/19978/1/src/drivers/i2c/rx6110sa/rx6110sa.c
File src/drivers/i2c/rx6110sa/rx6110sa.c:

PS1, Line 30: rx611sa_write
Why did you not use function name rx6110sa_write and rx6110sa_read?

PS1, Line 32: if (!CONFIG_RX6110SA_USE_SMBUS)
            : 		i2c_writeb(I2C_BUS_NUM, I2C_DEV_NUM, reg, val);
            : 	else
            : 		smbus_write_byte(dev, reg, val);
You can leave the negation of CONFIG_RX6110SA_USE_SMBUS if you replace the lines.
The same applies for rx611sa_read(...) function.