[XL] Change in coreboot[main]: mb/system76/bonw14: Enable TAS5825M smart amp

[Tim Crawford (Code Review)]

Attention is currently required from: Jeremy Soller, Tim Crawford.

Hello Jeremy Soller, build bot (Jenkins), coreboot org,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/61410?usp=email

to look at the new patch set (#7).

The following approvals got outdated and were removed:
Code-Review+2 by coreboot org, Verified+1 by build bot (Jenkins)

The change is no longer submittable: Code-Review and Verified are unsatisfied now.

Change subject: mb/system76/bonw14: Enable TAS5825M smart amp
......................................................................

mb/system76/bonw14: Enable TAS5825M smart amp

The Bonobo has 2 AMPs: one for the speakers and one for the subwoofer.

Smart AMP data was collected using a logic analyzer connected to the IC
during system start on proprietary firmware. This data is then used to
generate a C file [1].

[1]: https://github.com/system76/smart-amp

Change-Id: I5389a9890563ebd3adb20096b6225f474bc006f9
Signed-off-by: Tim Crawford 
---
M src/mainboard/system76/bonw14/Kconfig
M src/mainboard/system76/bonw14/Makefile.mk
M src/mainboard/system76/bonw14/devicetree.cb
A src/mainboard/system76/bonw14/tas5825m-normal.c
A src/mainboard/system76/bonw14/tas5825m-sub.c
A src/mainboard/system76/bonw14/tas5825m.c
6 files changed, 2,507 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/10/61410/7