Nico Huber has submitted this change. ( https://review.coreboot.org/c/coreboot/+/38817 )
Change subject: mainboard/supermicro: x11ssh-tf: drop leftovers of SUART3/4 ......................................................................
mainboard/supermicro: x11ssh-tf: drop leftovers of SUART3/4
SUART3/4 are unused on this board (verified by checking registers on vendor BMC firmware). Thus drop the remaining settings.
Change-Id: I2ababd92fcd7016c508aa3119e798f75eeb90a1c Signed-off-by: Michael Niewöhner foss@mniewoehner.de Reviewed-on: https://review.coreboot.org/c/coreboot/+/38817 Reviewed-by: Patrick Rudolph siro@das-labor.org Reviewed-by: Nico Huber nico.h@gmx.de Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb 1 file changed, 2 insertions(+), 8 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved Patrick Rudolph: Looks good to me, approved
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb index 3d46fe0..f481c77 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb @@ -114,14 +114,8 @@ end device pnp 2e.5 off end # KBC device pnp 2e.7 on end # GPIO - device pnp 2e.b off # SUART3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.c off # SUART4 - io 0x60 = 0x2e8 - irq 0x70 = 3 - end + device pnp 2e.b off end # SUART3 + device pnp 2e.c off end # SUART4 device pnp 2e.d on end # iLPC2AHB device pnp 2e.e on # Mailbox io 0x60 = 0xa40