Change in coreboot[master]: mb/google/brya/var/gimble: Configure GPIO to release PERST# earlier

[Mark Hsieh (Code Review)]

Attention is currently required from: YH Lin, Paul Menzel, Mark Hsieh, Zhuohao Lee, Felix Held.
Hello build bot (Jenkins), YH Lin, Tim Wawrzynczak, Paul Menzel, Zhuohao Lee, Felix Held,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/60279

to look at the new patch set (#2).

Change subject: mb/google/brya/var/gimble: Configure GPIO to release PERST# earlier
......................................................................

mb/google/brya/var/gimble: Configure GPIO to release PERST# earlier

This change in power sequencing appears to fix issues with power
consumption of the SD card controller. Possibly this change
ensures the device has enough time to properly initialize itself
after reset is deasserted but before it is accessed.

BUG=b:206014046
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.

Signed-off-by: Mark Hsieh 
Change-Id: I90e5dd074ceda365283fe7e1f43dfd8c692d7338
---
M src/mainboard/google/brya/variants/gimble/gpio.c
1 file changed, 5 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/79/60279/2