Philipp Deppenwiese has submitted this change and it was merged. ( https://review.coreboot.org/29207 )
Change subject: Documentation: Fix markdown highlighting ......................................................................
Documentation: Fix markdown highlighting
Fix some code blocks that use invalid Markdown syntax.
Change-Id: I8cfe63b2c21ae93923f88bbf7ef4cfb8dccdb5ef Signed-off-by: Patrick Rudolph siro@das-labor.org Reviewed-on: https://review.coreboot.org/29207 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Paul Menzel paulepanter@users.sourceforge.net Reviewed-by: Philipp Deppenwiese zaolin.daisuki@gmail.com --- M Documentation/soc/cavium/cn81xx/index.md M Documentation/vendorcode/cavium/bdk.md 2 files changed, 5 insertions(+), 5 deletions(-)
Approvals: build bot (Jenkins): Verified Paul Menzel: Looks good to me, but someone else must approve Philipp Deppenwiese: Looks good to me, approved
diff --git a/Documentation/soc/cavium/cn81xx/index.md b/Documentation/soc/cavium/cn81xx/index.md index 69fe710..3063b94 100644 --- a/Documentation/soc/cavium/cn81xx/index.md +++ b/Documentation/soc/cavium/cn81xx/index.md @@ -41,8 +41,8 @@ are unlocked and the contents are flushed to DRAM. Locked cachelines are never evicted.
-The CAR setup is done in '''bootblock_custom.S''' and thus doesn't use the common -aarch64 '''bootblock.S''' code. +The CAR setup is done in `bootblock_custom.S` and thus doesn't use the common +aarch64 `bootblock.S` code.
## DRAM setup
diff --git a/Documentation/vendorcode/cavium/bdk.md b/Documentation/vendorcode/cavium/bdk.md index 5763ece..5f6721f 100644 --- a/Documentation/vendorcode/cavium/bdk.md +++ b/Documentation/vendorcode/cavium/bdk.md @@ -1,7 +1,7 @@ # Cavium's BDK
## BDK -A part of Cavium's BDK can be found in '''src/vendorcode/cavium/bdk'''. +A part of Cavium's BDK can be found in `src/vendorcode/cavium/bdk`. It does the **DRAM init** in romstage and the **PCIe**, **QLM**, **SLI**, **PHY**, **BGX**, **SATA** init in ramstage.
@@ -11,9 +11,9 @@ for implementation details), where the key and the value are stored as strings.
The key-value pairs must be advertised in romstage and ramstage using the -'''bdk_config_set_fdt()''' method. +`bdk_config_set_fdt()` method.
-The tool '''util/cavium/devicetree_convert.py''' can be used to convert a +The tool `util/cavium/devicetree_convert.py` can be used to convert a devicetree to a key-value array.
## Modifications