Change in coreboot[master]: soc/intel/jasperlake: Allow SD card power enable polarity configuration

[Ronak Kanabar (Code Review)]

Hello build bot (Jenkins), Patrick Georgi, Maulik V Vaghela, Subrata Banik, Aamir Bohra, Patrick Rudolph, Karthik Ramasubramanian,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/41027

to look at the new patch set (#6).

Change subject: soc/intel/jasperlake: Allow SD card power enable polarity configuration
......................................................................

soc/intel/jasperlake: Allow SD card power enable polarity configuration

SdCardPowerEnable ActiveHigh is a UPD which controls polarity of SD card
power enable pin. Setting it 1 will set polarity of this pin as Active
high. This patch will allow to control it from devicetree so that it
can be set as per each board's requirement

BUG=b:155595624
BRANCH=None
TEST=Build, boot JSLRVP, Verified Upd value from fsp log
Signed-off-by: Ronak Kanabar 
Change-Id: Id777a262651689952a217875e6606f67855fc2f4
---
M src/soc/intel/jasperlake/fsp_params.c
1 file changed, 4 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/27/41027/6