Change in coreboot[master]: mb/ocp/tiogapass: use common GPIO config [WIP]

[Maxim Polyakov (Code Review)]

Hello build bot (Jenkins), Andrey Petrov, Patrick Georgi, Martin Roth,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/39427

to look at the new patch set (#8).

Change subject: mb/ocp/tiogapass: use common GPIO config [WIP]
......................................................................

mb/ocp/tiogapass: use common GPIO config [WIP]

According to changes in the soc/xeon_sp code [1,2], server motherboards
with Lewisburg PCH can use the common pad configuration from soc/inte/
common, using macros PAD_CFG_ instead of the FSP-style GPIO definitions.

This GPIO configuration was taken from the inteltool.log dump with AMI
firmware and converted to macros using intelp2m [3].

[1] https://review.coreboot.org/c/coreboot/+/39425
[2] https://review.coreboot.org/c/coreboot/+/39428
[3] https://review.coreboot.org/c/coreboot/+/35643

Change-Id: I818d040fa33f3e7b94b73c9bbbafca5df424616d
Signed-off-by: Maxim Polyakov 
---
M src/mainboard/ocp/tiogapass/Makefile.inc
A src/mainboard/ocp/tiogapass/bootblock.c
A src/mainboard/ocp/tiogapass/gpio.h
M src/mainboard/ocp/tiogapass/ramstage.c
M src/mainboard/ocp/tiogapass/romstage.c
D src/mainboard/ocp/tiogapass/skxsp_tp_gpio.h
6 files changed, 623 insertions(+), 1,031 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/27/39427/8